Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #87752 next resume »»
CONTACT INFORMATION:
View contact information...

Objective
To take my skills and talent that I've acquired as a craftsman and business owner and put them to use for a highly respected, reputable company. To put my natural leadership skills and ability to supervise to work for a company that takes pride in it's quality and attention to detail.

Qualifications
Most recently I have owned my own framing business for the last 9 years. I have continued to work on the job sites to ensure my product is nothing less than exceptional. With my experience in the construction industry being so varied, I have gained my Class A to operate various tractors, trailers, trucks, and pieces of equipment. I have always maintained and worked on my own equipment and vehicles, my skill and experience in mechanics dates back to when I was a teenager working out of our own garage. My skills are diverse, as I have worked in many areas of construction, including roofing, siding, block, plumbing, stucco, demolition, and general remodeling. I have also worked both residential and commercial, single family and multi-family projects. I work well with others, possess strength in leadership, and communicate well with homeowners/ clients, contractors, inspectors, and other subs alike I have experience in heavy equipment operations including- skid steers, many all terrain fork-lifts (Petty bone, Lull, Ingersol-Rand, New Holland), dump trucks, day cab tractor trailer, doc trucks, clam trucks, mini track hoes, and a variety of tractors. My driving record is clean and health card current.

Relevant Experience
7/2008-1/2009 Ice O-Metric Contracting Inc., Big Lake, MN
General laborer. We worked on the St. Cloud Army National Guard helicopter base addition. I installed a foam insulated steel panel system and commercial grade steel trim. Misc. steel framing. All Commercial.

2/2003- 6/2008: Morlock Construction, Zimmerman, MN
Owner and supervisor for framing crew. I read blueprints, created bids, and framed new construction and remodel, while acting as the job superintendent for the builders that I worked for. Jobs have included both single family and multi-family projects.

9/2005-7/2005 Brylock Contractors, Gulf Port, MS
Partner/ owner. This was a partnership that was formed by myself and another individual in response to the need for workers in MS after Katrina. Most of our work was non-profit, and when I say non-profit, I mean we did not charge for our services. We did demolition and rebuilding both residential and commercial.

7/2001- 2/2003: MBM Construction, Zimmerman, MN
Partner/ owner. A three way partnership of a new home construction framing company.

Other companies employed with:
CSN Construction: Zimmerman, MN
Remodeling and additions.
Chad Nasby, owner, 763-286-7322

Bakken Builders: Big Lake, MN
Sub-contractor, framing, remodeling.
Commercial and residential.
DJ Bakken, owner, 763-263-3900

Palmer Homes North: Ramsey, MN
Framing and remodel.
Jason Palmer, owner 763-464-2511

Cairnes Construction: Elk River, MN
Lead carpenter, crew supervisor. New home framing.
Rob Cairnes, owner, 763-238-7340

Sierra Corporation: Blaine, MN
Lead carpenter, new home framing.
John Likum, owner, 763-783-9616

Mark's Stucco: Ramsey, MN
Stucco laborer
Mark, owner 763-427-7344

Anderson Plumbing: St. Francis, MN
Out of business, number not available

All Home Remodeling, Greenfield, MN
Framing, general construction.
Ray Schreckenghaust, owner, 612-685-2676

Viking Pattern and Mold, Blaine, MN (1990's)
Mold maker
763-746-4004

Carley Foundry, Blaine, MN (1990's)
Mold Maker
763-780-5123

Certificates/ Licenses
Class A CDL, MN.
Forklift certified
Permit to carry a concealed weapon, MN.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 4051 to 4100 of 4814)Go to Search Parameters...
Brief Description
I have 5 years experience in Administration & Secretarial works, I worked for both local and multinational companies and I am securing a promising position that offers both challenges, good opportunity for growth and to meet my competencies, capabilities, skills, education & experience.
A globally-certified procurement professional with extensive Asia-Pacific experience
LPG/LNG Operations - Bottling & Bulk Supply & Distribution, Project Management, Primavera & MS-Projects
Value through hard work and performance
draftsman with international experience in dubai two years with multitalanted challenging position
Offering over 10 years of full and comprehensive experience in instrumentation works that includes Installation,Calibration,Loop Checking and Functional Checking, Pre-Commissioning, Commissioning Activities, Trouble Shooting and Repair. Maintenance works in
Experience in Blasting Painting/ Coating, Insulation and Quality Control Standard
• More than ten years experience in project/operation management and real estate development
Operating front-end loaders & dozers in the waste industry
Twenty years of contract management and procurement experience in commercial and government environments including supervisory roles. Experienced in onshore and offshore construction international contracting.
Big believer in teamwork, organization and co-operation, have the ability to perform well under pressure, hard worker, able to behave as a leader, manage stress.
I am available for all your open positions regarding my qualifications - Technical/Managerial/Projects positions, throughout Europe/Middle East & Africa.
I have held management/technical positions with the companies listed within my resume for over 20 years specializing in construction, environmental, mining, mineral/material processing and chemical manufacturing businesses. I have significant experience in all functional areas & P/L responsibility.
Experienced in construction document controls, field office management, setup initial document controls for field office, project scheduling with Primavera P3 and MS Projects.
Offshore Advanced Rigger,experianced,heavy lift,200t capt,AB seaman
Construction manager, laborer, Class A CDL Drivers license, mechanic
Safety Officer /HSE officer, More than 4 years experienced as SAFETY OFFICER in all PILIPINAS SHELL PETROLEUM CORPORATION – Mindanao Depots and Services Stations.
With over eight years of project management experience on seismic petroleum exploration surveys and submarine cable installations. Proven ability to work independently, to work closely with the client on site, and to supervise operations in diverse and difficult working environments
Maufacturing Automation
I have work experience in United States, SE Asia, and China. I am a registered Professional Engineer (Civil) in State of California, USA. I am looking for a professional/managerial position in civil engineering/construction. Project experience and publications are available upon request.
Mechanical, electrical, structural maintenance & repair, estimating, project supervision.
The main areas of my expertise are Preparation of Engineering Estimates for civil engineering Projects, Survey and layout at site, Preparation and Evaluation of Tender Documents, Measurement and certification of Contractors work done, Contract Administration, Construction Supervision, Maintenance of
With 8 years of extensive management & engineering experience in construction field, I seek a senior management position which will allow me to utilize my experience at higher positions.
Posess over 4 years as a solid Sr Document Controller
Electronics Engineer exp. in OPTICAL FIBRE , RF, WIRELESS, PROJECTS ROLLOUT
Operations Manager,Plant Manager,Equipment Manager, Maintenance Manager
I am a graduate in Chemical and Process Engineering.
Welding Engineer
A diligent Civil Engineer with eight (8) years of Professional commitment to hard work in diverse role varying from Site Engineer, Project Engineer, Site Manager, and Construction Project Manager. A good team player, highly mobile and willing to be part of a result driven goal oriented team.
My capabilities have been achieved through many experiences which include training and support of in-house staff in multiple locations, while working on concurrent projects as a Sr Designer/Project Engineer.
NACE Level II Certified Coating Inspector, Certified Welding inspector
Free! Industrial construction electrician with two years maintenance in open pit mine
Telecommunication Engineer seeking a Summer Internship with high skills in wireless and broadband sector. Proficient in C,C++ and JAVA programming.
I have 5 years of purchasing experience in the oil/gas manufacturing industry.
I graduated from Associated Training services for Heavy Equipment Operator .N.C.C.E.R Certification on a variety of excavating equipment .I have a Class A CDL with Tanker Endorsement.I am a hard dedicated worker and a fast learner..
BSc in Electrical Engineering. Electrical Power major; English: very good in Reading, Writing and Speaking. No experience preferably (site work)
I am a plant and piping designer (PDS) - 11 year experience
Highly motivated individual with skills in Operation of Diesel Generator set (5x20MW), for Electrical projects in Designing, Estimation and Supervision of Industrial and high rise buildings.
Remote Paramedic, Firefighter, Paramedic
Highly experienced Camp Boss/Chef Manager working in the Offshore Industry for several years very safety culture and good motivator of a team.
More than 7 years experience in the field of Construction works like design, Engineering, Estimation, Tendering, Planning, Fabrication, Erection, Quality aspect & Commissioning of the Projects Such as Petro- chemical Plant (LAB Plant), Metrology Buildings, Sport complex.
Dedicated, results-oriented, professional with the ability to manage projects and meet deadlines. Strong communications, customer service, and problem-solving skills. Successful in networking with individuals on all levels. Excellent organizational, multi-tasking and time management abilities.
Competent HSE Officer and registered with Department of Occupational Safety & Health Malaysia, Lead HSE MS Auditor with NCSB. Diploma in Occupational Safety & Health.
Software Executive(QC/Documentation) & Document Controller
nvq level 3 in electrical installations, 17 th edition wiring regs, hv terminationsand splicing, supervisor experience
Commissioning of utilities in oil & gas plants and water treatment plants
Mechanical System Engineer
Mechanical Engineer with approximately four years experience in a variety of industries including Oil and Gas, Commercial HVAC, Mining, and Power (Utilities). I have been involved in the design and layout of mechanical systems, technical writing (spec's and reports) and pipe stress analysis.
Mechanical engineer with extensive experience of over 13 years in contract administration, estimation, tendering, budgeting, cost control, billing variations, claims and arbitrations & project closing. Well-versed in procurement, installation and commissioning of electro-mechanical
Senior Document Controller. 9 years experience. Oil & Gas, pharmaceuticals, petrochemicals. Bachelor of Science in Electrical Engineering graduate. Using WebDMS. Electronic transmittals, document store, electronic issue of documents. ISO standards. Can lead Doc con group. Coordinate with Clients,
First   Prev   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80   81   [ 82 ]   83   84   85   86   87   88   89   90   91   92   93   94   95   96   97   Last
Seach Parameters

Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com