Resume - INSTRUMENT AND CONTROL ENGINEER, DCS SYSTEM AND CONVENTIONAL SYSTEMS EXPERIENCE.

Misco Jobs

Resume #87812

CONTACT INFORMATION:
View contact information...

„« NATIONALITY: INDIAN
„« MARITAL STATUS: MARRIED

SKILLS SUMMARY:

„« 7 Years of exposure to ABB/Honeywell DCS systems erection, testing and commissioning of Boilers, Turbines and Desalination Plants.
„« 18 Years of Power and Desalination Plants Instrumentation experience.
„« 10 Years of Department of Atomic Energy Instrumentation experience.
„« Familiar with Permit To Work system and Work order system for safe Maintenance jobs.
„« Good exposure to Data stream hi ERP Package application.
„« Hands on experience on Computer skills like MS-Office, Win 98/2000/XP.

EDUCATIONAL QUALIFICATION & TRAININGS:

„« Diploma in Electrical Engineering (Electronics and Instruments)
„« Department of Atomic Energy, Bombay, Power Projects In plant Training.
„« Trained in DCS systems of Power Plant Engineering by ABB & HONEYWELL.
„« Data Stream hi & Oracle based Enterprise Resources Planning, Maintenance Management System exposure.
„« Power & Desalination plant Instrumentation orientation in plant training by SWCC.

TECHNICAL SKILLS:

„« Worked in multiphase Desalination & Power Plants with production capacity of 130 Million Gallons of water and 920 MW of power respectively.
„« Worked in Nuclear Power Plants in India with power capacity of 2 units of 230 MW each.
„« Worked in Oil Pumping Stations and Oil Storage Tanks Instrumentation.
„« Worked in Gas Turbine Instrumentation.

WORK EXPERIENCE DETAILS: March 1982 to present date

„« Has been working as Instrumentation Foreman in multiphase Desalination & Power plants of Saline Water Conversion Corporation, Jeddah, Saudi Arabia.
„« Responsible for the ABB/Honeywell DCS systems retrofitting of 4 Boilers, 4 Turbines and 4 Desalination Plants.
„« Job involves compiling of number of Input/Outputs, Checking of erection drawings, erection of control panels, Cable routing decisions, cabling work, Wiring termination, cold checks of individual loops, commissioning and testing of Boiler, Turbine and Desal plants.
„« Worked in another plant commissioning and testing of ABB/Honeywell DCS systems for a 118 MW Boiler.
„« Presently working in a new ABB DCS System for retrofitting of Electrical systems in Phase III plant for 1000 binary inputs and Analogue measurement and Controls for 380 KV system alarms, Transformer Alarms, Sub-station board Alarms, breaker status alarms etc. Job involves listing of signals, checking of ABB drawings for erection, supervising and executing the erection jobs, also commissioning and testing of the system.
„« Responsible for Daily defects in Boilers and Turbines DCS systems and in Conventional Instrumentation system maintenance jobs.
„« Responsible for taking Permit to Work and additional work permits for welding jobs, confined work area jobs etc and distributing and Supervising the jobs for safe completion.
„« Also responsible for selecting / issuing Instruments from Central Stores for replacement of defective ones.
„« Gained extensive knowledge and experience in erection, commissioning, testing, calibration of various types of primary and secondary instruments like pressure, flow, level, temperature sensors, Control valves, various Pump controls, analysers etc.
„« Supervised erection/commissioning/testing of variety of power plant instrumentation equipments from various manufactures.
„« Responsible for Boiler, Turbine, Water plants, Pump houses, RO plants, Chemical plants, Oil Storage Tanks, Oil Pumping Stations, Electrical Transformer protection systems etc for Instrument maintenance jobs.
„« Responsible for the entire Powerhouse boilers, turbines and desalination plants major overhauls during the last 25 years.
„« Interacted with several companies in deciding equipment selection, site layout priorities, testing details, failure analysis studies, reliability estimates of instrumentation equipments by correlating rich field experience.
„« Exposure to Babcock Wilcox, Francotosi boiler instruments, ABB, Siemens Turbo generator instruments etc.
„« Selecting and replacing existing old type / obsolete instruments with latest digital and Smart type instruments.
„« Implementation of modifications for improvement of Plant functioning.
„« Guiding and Training Technicians in Power plant & Desalination Instrument maintenance jobs.
„« Also associated in procurement of various Instruments local and imported.

From March 1972 to January 1982.

„« Has been working as Scientific Assistant/ Scientific Engineer in Department of Atomic Energy, Nuclear Power Plants in India.
„« Responsible for preparation of Instrument specification sheets for procurement.
„« Responsible for preparation of Process Instrumentation drawings, wiring diagrams, bill of materials, measuring loop diagrams etc.
„« Involved in procurement of various primary and secondary instruments from various suppliers in India and abroad.
„« Inspection of Instruments at various vendors site.
„« Involved in Instrumentation commissioning in Nuclear plants in India.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 101 to 150 of 4757)

Go to Search Parameters...

Brief Description

Master Plumber/ Master Pipe Fitter & Gas Fitter, Cert. 6G Welder

Engaged in major project execution of ROADS & HIGHWAY, AIRPORTS , COMMERCIAL PORT & POWER PLANT

Highly adaptable, mobile, positive, resilient, patient risk-taker and is open to new ideas. Productive worker with solid work ethic and exerts optimal effort in successfully completing tasks. Versatile all around worker which can handle multitasking

Experienced in Structural Steel Detailing. Highly proficient in AutoCAD, Capable to produce quality Erection plans and Shop Drawings.

I have over 20 years of specialised experience with varied role players such as Consultant, Contractor and client in the area of Project Control & Management. My experiences cover full range of services on the following categories • Business Process Engineering and Re-Engineering • Business Automat

Experienced CAD Technician with an excellent work ethic; loyal, and a team player.

Resourceful Project Superintendent and QA Supervisor with expertise in oil and gas industry project installations and industrial construction; focused on positively impacting cost control, resource maximization, timeline management, and team performance.

Over 25 years in the Construction Field

I've experienced for the boiler and energy sectors, in the commercial management and the site execution.

INSTRUMENT AND CONTROL ENGINEER, DCS SYSTEM AND CONVENTIONAL SYSTEMS EXPERIENCE.

I have over 18 years in experience in the construction,design and administration of large projects.

Diplam in civil engineer

+20 years work experience in fire alarm life safety, special hazards and low voltage industry. Bachelor of science in electrical engineering. NICET certified engineering technologist (Level 3 in fire alarm systems).

Construction management, and design of roads, infrastructure, utilities, pad sites, drainage and storm water management facilities.

Project Construction Management Professional have built High rise,Low rise,Industrial ,Infrastructrure and hospitality projects

Port Planning, Construction, project Management

An affiliate member of the Institution of Civil Engineering Surveyors. Experience of close liaison with the Client, Supervisor / Consultant Engineer, Contractor and Sub-contractor’s representative. Proficient in the management of keeping detailed records .

Responsible for maintaining mining equipment and responsible for performing safety Plant Operations, repairs and preventive maintenance and follow the procedures carefully reports to the supervisor any problem or trouble on his area of responsibility.

Facade Design, Curtain walling, cladding design

Civil/Structural engineer

Installation of electrical control,installation of electrical pannel board,installation of equipment overhead crane,trouble shooting,electrical control/machine,termenation of low/high voltage cable jointer

40 Years experience as a welder, 15 Years Sub-arc

Dedicated, creative individual with broad experience in project controls and project administration demonstrating interpersonal and organizational skills, with a proven ability to learn and adapt to change efficiently.

Engineering Technician/ Facility Manager

Knowledge in repair, rewinding, servicing and maintenance of electrical equipment such as AC/DC motor and generator ranging from fractional horsepower up to 8000 HP low and high voltage, wet and dry type transformer, coils and etc.

Fifteen years progressive experience in Construction Management and Engineering, Experienced in building and civil engineering works namely, roads, drainage, sewer and water networks, earth works and deep shaft construction, Full Member of the Charted Institute of Building UK (MCIOB)

Free! Welder

A hard-working and dependable Professional Quantity Surveyor with with the ability to work well both independently and in a team. My fifteen years experience in the construction industry has resulted in a well rounded confident and experienced Professional Quantity Surveyor.

Special Inspector CWI/ICC, Bolting, Fireproofing, B1 Inspector

Construction and Maintenance Mechanical Manager / Superintendent / Supervisor

Construction HSE proffessional residing in Canada. I am looking for over seas employment on a major Construction project. I am a board certified health and safety consultant and Safety officer as well as having over 15 yrs of construction expeirence as a journeyman tradesman.

I am a highly competent person, trained and experienced in all facets of construction, construction management and leadership.

25 years experience in construction management of mining operations, highways, dams, site preparations, environmental, airports and petrol – chemical projects. Management assignments in 12 major projects.

Experienced structural engineer (US and Australian experience)

Mechanical Enginner with more than 16 years of experience in the field of Construction, Maintenance of Petrochemical, Chemical and Power plant

Acquire 17 years of experience as Mechanical Construction Field Engineer in Oil & Gas (Upstream & Downstream), Chemical, Petrochemical & Pharmaceutical projects. Experienced in Planning, Organizing & field monitoring activities related to Piping and Equipment (Rotary & Static) installation.

Career minded Hands on Professional with over 30 year’s industry experience which includes Project Management, Health Safety and Environmental Management along with Anti Terrorism Security Design within various Industries and Governmental Organisations.

Recently had the M.Sc. degree in electrical engineering from University of Technology

Experiienced in estimating, forensically challenged change orders, cost analysis, bid analysis and project supervision. I have accreditation for osha 10, 30, and osha 500(certified to teach the osha 10 & 30 hour classes)

Construction project manager

Ase Master Mechanic 22 years

Result-oriented leader with more than 20 years experience, intuitive manager with a strong technical attitude, self-confidence and change catalyst, specialist with experience in TQM, process improvements and process mapping.

B.SC. ENGINEERING, PROACTIVE TECHNIQUE,ISO9001:2000 & HSE

17 years in procurement, project management, planning

electrical/mechanical superintendent/ project manager

Civil Engineer with 17 years experience

Chief Finance Officer of Group having One Islamic Investment Bank in Dubai and Asset Mangement Company in Malaysai,

Expert in managing conglomerates and applying strategic planning and control instruments

Civil Engineer. Formwork Specialist. Experience: 14 years. Mounting, Scaffolding, Precast Concrete.

Fujitsu LV-III Installer, OSP Field Engineer, Structure Cable Lead Installer, Fiber and Copper Splicer, Network Tech, Antenna Tech

First 1 2 [ 3 ] 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out