Resume - Debasis is a geotechnical engineer and numerical modelling specialist within Sco...

Misco Jobs

Resume #87837

CONTACT INFORMATION:
View contact information...

Date of Birth 04/05/1974 Nationality INDIAN

Education:
Masters in Civil Engineering (Specialisation in Soil Mechanics & Foundation Engineering), Jadavpur University, Kolkata, 1999 (India)

Bachelor's in Civil Engineering, North Bengal University, West Bengal, 1997 (India)
Employment details
Employer SCOTT WILSON LTD, BIRMINGHAM, UK
Year July 2008 to Contd-

Projects handled

1. Tsuen Wan Drainage Tunnel, Hong Kong
Activities Performed/ Detailed Task Assigned
Finite Element modelling and SCL temporary support design for 5km, 6.5m ID drainage tunnel, inlet caverns and access adits in mixed ground conditions. Numerical analysis of tunnels at critical stretches based on rock cover, identifying the critical parameters for design, identifying the zones of potential failures, planning excavation sequences and providing numerical modelling inputs for design of tunnel linings. Analysis was also carried out on critical intersections with multiple openings to identify the potential failure zones in rock pillars between openings as part of this detailed design. All analyses were performed using Phase2 FE software.

2. A41 Expressway, Sandwell Metropolitan Borough Council
Activities Performed/ Detailed Task Assigned
Checking capacity of bored piles under foundations of footbridge for both axial and uplift loadings.
Checking forces and movements in secant piled walls, supporting vertical walls in excavated areas using PLAXIS.
CAT II check of secant pile walls, steel sheet pile walls, Bridge foundation bearing capacity & settlement along different sections of Grade separation interchange.

3. Westbourne Park-Crossrail Project
Activities Performed/ Detailed Task Assigned Performed preliminary analysis of contiguous bored pile wall using WALLAP at different sections to evaluate stiffness, deflections of wall and predicting moments and forces in wall. Also performed detailed FEM analysis of wall sections at different retained heights using Plaxis.
Detailed analysis of pile group using Repute software to support new gantry girder legs.
4. Tottenham Court Road Station Upgrade, Crossrail Project
Activities Performed Geotechnical modelling of new SCL tunnels in London Clay for independent CAT III design checks. Finite Element analysis of complex cross-sections comprising multiple new SCL tunnels, existing London Underground Tunnels and new deep excavations for ticket hall structures. Assessment of tunnelling induced ground movements and the impact of tunnelling on existing tunnels including existing cast iron-lined escalator barrels. Analysis was carried out using Plaxis software to provide lining forces and moments for stability and structural lining checks.

5. Humber Gateway: Metmast (Seawind Group)
Activities Performed Analysis of Monopile supporting Met Mast for an offshore wind farm using ALP & LPILE softwares.

6. M1 widening scheme, Highways Agency
Activities Performed Analysis of wall sections along highway alignment for different retained heights & options. Identifying geotechnical design parameters, methodology, risks and construction considerations. Preparing summary reports to assign geotechnical design parameters, forces & movements in wall sections along with preparation of risk register.

7. Liverpool Street Powerlink- Crossrail project
Activities Performed Geotechnical interpretation and Finite Element (FE) modelling of primary and secondary SCL support for the independent Category III design check on a new SCL cable tunnel and shaft linking into existing underground infrastructure at Liverpool Street Station. Numerical modelling was carried out using the Plaxis software to model the excavation and installation of SCL support in several stages and to assess the forces and moments exerted on primary and secondary support.
Analysis included consideration of the transmission of loading onto the sprayed lining against early-age strength gain of the SCL as well as modelling of permanent SCL support under long-term loading. Sprayed concrete linings for the shaft and tunnel are to be formed using steel fibre reinforced concrete.

Employer SMEC INDIA PVT LTD
Position Held Geotechnical Engineer
Year Feb 2007 to July 2008
Activities Performed/ Detailed Task Assigned
Kameng Hydroelectric Project
Review of failure on Powerhouse excavation cut slope and re-design of proposed slope stabilisation methodology by Slip circle analysis using SLOPE/W software. Also performed design of bored piles for slope stabilisation including preparation of design report and specifications.
Rhotang Pass Highway Tunnel
Review of Geotechnical inputs for Numerical analysis on proposed X-section of tunnel.

Srinagar Hydroelectric Project
Preparation of slope stabilisation reports on cutting of proposed powerhouse slope, Preparation of spreadsheets for Plane wedge analysis and wedge analysis by SWEDGE software.
Preparation of slope stabilisation reports on cutting of proposed dam excavation cut slope, Preparation of spreadsheets for Plane wedge analysis and wedge analysis by SWEDGE software.
Numerical modelling and analysis SCL supported head race tunnel intake portals, transition, junctions and main tunnels. Design work included recommendations for excavation sequences and support recommendations with analysis carried out using Phase2 software.
Check of Slope cuts by SLOPE/W software for excavation profiles in construction areas.
Panan Hydroelectric Project
Design of concrete liner of HRT tunnel for hydro project as per Bedded Beam model using STAAD PRO '05.
Preparation of report on foundation improvement of CFRD dam using Vibroflotation method.

Employer MOTT MACDONALD (INDIA) Pvt. Ltd
Year June' 2006 TO Jan' 07
Position Held Senior Engineer
Activities Performed/ Detailed Task Assigned
Luhri Hydroelectric Power Project, (700 MW)
Preparation of estimation of HRT tunnels against different options of studies, preliminary cost analysis, and theoretical gauge-discharge curve, Energy calculations at 90% & 50% dependable year, preparations of tender documents for geotechnical investigations and topographic surveys. Construction planning & Schedule of tunnels regarding DPR preparations.
Middle Vaitarna Hydroelectric Power Project, (51 MW)
Reviewal of feasibility report including cost analysis, power study and water availability.

Employer NATIONAL HYDRO ELECTRIC POWER CORPORATION LTD.
Name of Project Subansiri Lower H.E. Project.(2000 MW)
Year June' 2001 TO May' 2006
Position Held Engineer
Activities Performed/ Detailed Task Assigned
Modelling, numerical analysis and design for SCL and in-situ concrete linings to hydroelectric tunnels. Numerical analysis of junctions along pressure shaft with prediction of displacement values and extent of failure zones. Analysis of displacement and prediction of plastic zones at junctions of surge chamber and head race tunnels using FLAC3D software. Analysis of displacement and prediction of plastic zones at junctions of twin underground head race tunnels in highly stressed regions.
Analysis and structural design of diversion tunnel inlet using bedded beam models.
Development of the excavation sequence and support measures for surge chamber along with design of necessary support. Analysis of excavation and support using FLAC and Phase 2 software.
Preparation of Finite Element models for underground caverns in weak rock. Interpretation of modelling results to develop optimum support design along with criteria to monitor deformations and extent of yielded mass. Analysis of excavation using FLAC and Phase 2 software.
Development of estimated quantities for excavation, in-situ concrete, SCL, reinforcement and other support arrangements for a variety of underground structures.

Employer CONSULTING ENGINEERING SERVICES (INDIA) PVT LTD
Year May' 1999 TO May' 2001
Position Held Assistant Engineer
Activities Performed/ Detailed Task Assigned

Hinduja Thermal Power Plant
Supervision of Subsoil investigation including Rock drilling, Quality control works for earth filling and compaction. Conducting meeting with the client for approval of design and drawing
Panagarh-Palsit Road Section (NH-2)
Supervision of Subsoil investigation including Rock drilling
Investigation of existing pavement along with performance of in-situ tests in sub grade, Pavement and Materials report preparations,
Identification of borrow and quarry sites for new pavement construction,
Geotechnical calculations to check bearing capacity under open and deep foundations, High embankment design using Bishop's method.
HVM Expressway
Supervision of Subsoil investigation including Rock drilling along the existing alignment of HVM Expressway.
Mechada-Haldia Road Section (NH-41)
Supervision of Subsoil investigation including Rock drilling
Investigation of existing pavement along with performance of in-situ tests in sub grade, Pavement and Materials report preparations,
Identification of borrow and quarry sites for new pavement construction,
Geotechnical calculations to check bearing capacity under open and deep foundations, High embankment design using Bishop's method.

REFERENCES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 4757)

Go to Search Parameters...

Brief Description

Self-motivated, results-oriented professional with extensive international experience with multinational firms and government-owned facilities in the construction, shutdown, and refurbishing of oil, gas, petrochemical, and power facilities and plants.

Over 20 years of extensive experience as an international consultant. Provider of structural software for the analysis and design of concrete & steel according to ACI, AISC & API codes of practice. Expert in; structural systems & forensic investigation. Professional in; STAAD III & MS office Suite.

Graduated in B.Eng civil 1976 and Post grad Hydraulic in 1982, total 28 years experience in civil, infra such as steel, timber, road, car park structures and sewer and pipe laying as well as tunnels and pipe jacking works.

Free! Experienced Heavy Civil & Design Build Construction Project Manager with additional experience with Project Controls/Scheduling/Claims Resolution Management.

Refractory sales and Technical support

B.E.(Mech.) & BEE certified Energy Auditor

I am a civil engineer with more than 12 years of experience in Mauritius. I hold a first degree in civil engineering, a master degree in environmental engineering and another master degree in business administration. I already got my Permanent residence for Australia since July 2008.

Licensed Journeyman Electrician, thirty four years experence, Industrial, commercial, residential, and oil field

Mechanical project &maintenance engineer with 17 years of industrial experiance.

Mechanical engineer in cement Plant

Over 16 years of experience in construction industry local and abroad. Responsible for completing the project within time and within cost.

HVAC Professional Having 17 Years of rich Experience in Major MEP projects,expert in handling fast track projects with in project time frame and budget..

Engineering and construction executive with MS in civil engineering and construction management and BS in general engineering, with extensive hands on and executive level experience in project, construction, and contract management in multi-deceiplinary projects in the international arena.

Quantity Surveyor 3 yrs experience in Gulf

MEP Cad Designer / MEP Cad Coordinator / HVAC Designer

Knowledgeable in electrical, mechanical, and some electronics

electrical contractor for 25 years and have a ton of experience in the electrical field.

all-round civil engineering background with experience in traditional building constructions and special structures, such as bridges, tunnels, towers, piers and offshore structures including design, planning, project management, quality assurance and supervision.

Extensive experience and skills to help industrial organizations improve their effectiveness through better use of processes and systems. Also very proficient in development and use of integrated improvement teams.

Knowledgeable and experienced Design Procedures with 15 years road construction experience

Construction project manager

20 years in Oil/Gas in Eng. ,Procur.and Construction including Piping Design in accordance with international codes, Procurement Technical Services & Construction Supervision. Management of Eng. Staffs in Multinational and International Environments Conversant with ARAMCO and SHELL DEP Specs

Instrument technician - PLC/DCS programmer

Civil Marine, Dredging & Coastal Engineering. record: 70 projects

Road works

I have 15 yrs experience in construction supervision of roads and bridges (RCDG), concrete slope prot. works, RCBC and concrete retaining walls. Presently I am working in Saudi Arabia as Civil Engineer handling big highway proj. designed for asphalt pavement.

Sr Instrument Engineer with over 15 years experience in the design and specifications of instrumentation for petrochemical plants, and 2 years for offshore platforms

Structural/Geotechnical Engineering jobs such as Pile design, Retaining wall design and project management

Hands on site experience in infrastructure works (roadworks ) and buildings works with total 19 + years experiences ( supervision and project management)

Licensed professional engineer with over twenty-seven years of structural design and deliverables production experience for Industrial, Commercial, Residential, Oil and Gas, and Transportation projects

I have 17 years of Planning experiences within oil and gas, petrochemical, mining, power plant and industrial plant construction. I am also an advance user of P3/P5/P6.

B.E. with 22 years of experience in Highways, Industrial and Building construction, out of which 3 years in Saudi Arabia. The experience includes-

I am a sri lankan working in oman -presently in the field building services as an engineer. Capable of designing - cold & hot water supply systems, sanitary plumbing stsems and fire fighting systems)

Pressure Welder, Pipe Welder with 20+ yrs experience, Hard working

I have been in Truss deaign,layouts,and engineering for approx.36 years. I have experience in single family commercial,spealizing in multifamily design of beams, componets,floors and roof trusses

QA/QC Electrical Engineer

Total station operator

15 year of experience in the glass and aluminium industry

Application for the post of project manager/ section manager

heavy equipment operator sewer and water forman

Project/site /operations manager

Debasis is a geotechnical engineer and numerical modelling specialist within Scott Wilson’s Ground Engineering team. He is currently responsible for numerical modelling and geotechnical design input for tunnel linings, retaining structures and earthworks working on a variety of infrastructure sche

hi looking for job

Professional individual having Soil Investigation, Soil Improvement, Diaphragm wall construction, Quay wall construction, Piling, Drilling Techniques (All Types) Geotechnical Special Testing, Material Testing, Geotechnical & structural Instrumentation & Geological Mapping skills.

Electric Engineer

International Project Management Residential Commercial Industrial

Dip Elect & Mech Engineering + LLB + MBA

Over fifteen years experience as Certified Business Continuity Professional with over ten years experience as Project Management,Technical Writer and trainer and over a year as a SEI/CMMI Auditor, completing projects ontime and within budget.

B.Eng, Traffic and Transportation Planning and engineering, local area traffic management, transportation modelling, sidra, transyt, trips, bus transit, light rail route and station planning

Traffic Engineer with Master of Technology degree in Transportation Engineering. I have about 11 years of technical and project management experience in UAE, Qatar, India, Sudan and Saudi Arabia, in the area of traffic and transportation engineering/planning;

First 1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out