Resume - Electrical Engineer-Inspector-Surveyors

Misco Jobs

Resume #88238

CONTACT INFORMATION:
View contact information...

Personal Statistics:
Citizenship: Croatia
Date of Birth: 1972-01-29

Language Capabilities:
Language Level
Croatian Native
English high
Italian low

Academic and Professional Attainment:
Bachelor of Science, FESB-Split, Electrical & Electronic Engine,

Summary of Professional Experience:
2000-2006 Sea going experience on container and bulk carrier vessels of "Jadroplov"
Split-Croatia and "E.R" Hamburg-Germany, in capacity of Electrical Engineer
2001-2002 Worked for sub-contractor in Shipyard Split
2002-2003 Employed on position of Electrical Engineer and Electrical Inspector in Sweden on passenger ship for "(reparation 7months), "Elegant Cruise Line",
Port Washington NY- U.S.A.
2006-2007 Working in Hyundai Heavy Industries Ulsan on position of Senior Electrical
Inspector for Kuwait Oil Tanker Company under project 1765,1766 and
1767,two VLGC (83000cm3) and one VLCC (317 000dwt)

Present Position:
Det Norske Veritas-DSME Site Office - Working on Newbuilding projects (LNG-steam and electric propulsion, LPG, VLCC, PCTC, COT S-max.) including approval of Onboard Test Procedure and CMC and on Newbuilding Offshore (Drill Ship,Semi Drilling Rig) on position of Senior Surveyor / Electrical.

Detailed Professional Experience:

Det Norske Veritas - DSME Site Office 2008, present
Worked on following ship newbuildings projects (*including Sea Trial, ** including Sea and Gas Trial) and doing approval for On board Test Procedure and EO Maintenance Manual,also following all CMC and approval comments:
H 2322* & 2323* - LPG 83000cbm - Peninsula V Shipping (GMM)
H 5292 - VLCC 320 000dwt - Iris Shipping
H 2232* - LNG 148 300cbm - BW Gas (steam turbine)
H 2241* & 2242* - LNG 145 700cbm - Sovcomflot (steam turbine)
H 2317* - LPG 84000cbm - UNO Shipping (Marangas)
H 4448* - Car/Truck Carrier 6000unit - Leif Hoegh & Co Shipping AS
H 5294, 5295 & 5296 - VLCC 318 000dwt - NITC
H 2318* & 2320 - LPG 84000cbm - BW Gas
H 2258** & 2259** - LNG 162 400cbm - BW Gas (electric propulsion)
H 5293 - VLCC 318 000dwt - Peninsula V Shipping (GMM)
H 2267 & 2269 - LNG 173 400cbm - Knutsen (electric propulsion)
H 5307 & 5308 - 320 000dwt - Peninsula V Shipping (GMM)
H 4453 - Car/Truck Carrier 6000unit - Leif Hoegh & Co Shipping AS
H 5319 - VLCC 317 000dwt - Vela
H 5310 - Suez Max. 157 000dwt COT - Sovcomflot
H 1194 - Bulk Carrier 180 000dwt - Anangel

Involved in CMC surveys for ECC, BCC, Bridge Wing Console,Cargo Control Console.
On going job training for DP surveyor, CMC (electrical) surveyor and machinery surveyor.

Doing electrical survey on following Offshore newbuilding projects (*including Sea Trial and **DP trial) and approval commisioning procedure:
H 3019 & 3020 - Sea Tanker Semi-Rig (Subsea Drilling III) - Seadrill
H 3023 - Odfjell Rig
H 3501/5903**, 3502/5904- Drill Ship - Transocean Drilling
H 3024 - Semi-sub Drilling - Petroserv
Kuwait Oil Tanker Company 2006, 2007
Newbuilding 1765-VLCC 317 000dwt
Newbuilding 1766,1767-VLGC 83 000cm3
My obligation was supervision of all Electrical parts and testing, also drawing approval and design alterations for the same projects. Also covering some Machinery parts (Air Compressors, Aux.Boiler, Diesel Generators, etc.) and covering inspection in Denmark (Nordhavn-Emergency Generator, Ellehamer-Emergency Fire Pump,Hamworthy Svanehoj-Cargo Booster Pumps) and Germany ( Loher -Electrical Motors for Cargo Pumps), and cooperation with DNV. Owner's reprensetative during officaial visit shipyard Samsung Heavy Industries for the KOTC future projects.
ER Schiffahrt 2004, 2006
Sea going experience on container vessels in capacity of Electrical Engineer.
Responsible for all electrical and electronics equipment on the vessel including
Deck cranes and reefers.
Jadroplov 2000, 2004
Sea going experience on container and bulk carrier vessels in capacity of Electrical Engineer.
Responsible for all electrical and electronics equipment on the vessel including
Deck cranes and reefers.
Elegant Cruise Line-USA 2002, 2003
Conversation from Ferry to Luxury Passnger Ship.
Inspecting and commissioning of various
Ship's equipment:
-main and emergency switchboard
-generators and emergency generator
-air condition
-sewage plant
-reverse osmosis system
-all main pumps with electro motors
- Bow thruster
-etc.
Brodosplit 2001, 2002
Worked for sub-contractor in Shipyard Split (between navigation), installing, connecting and checking different electrical equipment (distributions box, main and emergency switchboard, aux. boiler etc.),checking trace for cables

Professional Training
2009: SOLAS Basic, Life Saving Appliances and Fire Safety
2009: Certification of Control & Monitoring Systems Web Primer
2009: Maritime Rules & Regulations
2009: SSAS Shipboard Verification
2008: Dynamic Positioning
2008: Classification Basics
2008: DNV Classification Processes Web Primer
2008: Dynamic Positioning Web primer
2008: QMS Web Primer
2008: ISPS Code - Ship Survey Web primer
2008: Electrical Installations in Hazardous Areas on Tankers
2008: NPS NB2 Edit Product Model
2008: NPS NB1 Project Control
2008: Electrical Installations
2008: Auxiliary Boiler, web
2008: Safety Training for Surveyors
2008: Confined-space Entry
2008: Personal Protective Equipment
2008: Navigational Bridge Systems, Nautical Survey
2008: NOx Certification of Diesel Engines According to MARPOL Annex VI
2008: Survey of Lifting Appliances on Ships
2008: WE in DNV, web
2005: CD#115 Security Awareness-ISPS
2003: Tanker Familiarization-STCW
2002: Dangerous Cargo Handling-STCW
2001: Advanced Fire Fighting-STCW
2001: Basic Training-STCW
2001: Medical First Aid -STCW
1999: Familiarization Training-STCW

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2001 to 2050 of 4758)

Go to Search Parameters...

Brief Description

eight years of experience in geotechnical engineering and specialize in foundation investigation and excavation shoring structure. I worked as a geotechnical engineer in Beijing Geotechnical Institute (www.bgi.com.cn) which is the largest geotechnical corporation in Beijing city.

Retail Project Manager -- Experienced with Brand and Image upgrades and conversions. Willing to travel and/or relocate for the right position.

To obtain a position with a respected, safety oriented company, where I would be challenged and able to use my knowledge and training in the HSE, management and enforcement fields, to help create and/or maintain a safe working environment for all its employees.

This will serve as a reference to employer seeking a qualified employee to their company.

8 years of working experience in the field of Electrical Engineering with experience in Design and Construction, Testing & Pre-commissioning for Substations, Industrial, High Rise Buildings, and other infrastructure projects.

I am a civil engineer with an MBA degree from Rollins College, Orlando, FL. I have work experience in geotechnical and transportation engineering. Now, i am looking for project engineering jobs, where i can utilize both my engineering and management skills. I don't have any location preferences.

I am very qualified to do the job. I have a list of references if needed. The majority of my work has been retail in the 3-5mm range all fast track. Am a team player and have always done what it takes to get the job done. Have own laptop with ms office and project.

Architectural Draughtsman cum Civil Engineer

More than 14 years of experience in Project Procurement in Oil & Gas and Heavy Engineering Industrial sectors mainly comprising of:

I am a top salesman with experience in real estate, and industrial sales. I also have experience in construction as a millwright/supervisor, craft superintendent, on large projects exceeding $100 million

Five years of experience abroad with M/s Nasser S Al Hajri Co. Ltd. in handling all kinds of office administration, operational, technical related clerical support task through coordination of diversified administrative and technical service in construction works in Qatar. Well versed in Computer

Mechanic & Welder on construction equipment, to include repair and rebuild all parts.

11 years experience including 5 years in developing countries, in the areas of pavement design, costing, construction using Asphaltic Concrete, sprayed seals, crushed aggregate basecourse, water bound Macadam and concrete, highway maintenance, road asset management

Drilling Consultant, Operations Manager, Directional coordinator, Directional driller

BMSE with TX PE

Detail oriented Construction Project Manager with over 10 years of experience with Federal and Private Contracts

Senior Certificate

Currently Principal Commissioning Engineer on Gas To Liquids project (Qatar), with 16 years experience in chemical and gas industries as operations technician, supervisor and lead commissioning engineer. Experience includes project work control and management.

OSHA Safety Trainer

BS Economics, administrative/secretarial/research/computer skills, ICDL

Mech Engr + 8 years Experience + Overseas experience + large EPC projects + Techinical advisor

This resume shows briefly my information about Personal Characteristics, Education Background, Experience history, Professional Skills, and other related information.

Chemical engineer with twenty four years of total experience in the Oil & Gas, Oil Processing and Petrochemical industries, in project engineering, design supervision, multi-discipline engineering co-ordination, contract management, commissioning supervision and construction management.

I am C.A Finalist (Institute of chartered accountants of Pakistan) and have completed my articles as per C.A bylaws for the period of 3&1/2 years with Avais Hyder Liaquat Nauman Chartered Accountants (A correspondent firm of RSM international. I have sufficient expertise in account, tax, financial m

I am a civil engineer with 8 years experience with different international organizations.

I am looking for contract work or 35.00 per hour. my last job was the fabrication of a chemical mixing plant 1m in parts and labor, all my jobs I was in a leadership role

Education : B E Mechanical Overall experience of 8 years in the field of construction , oil and gas. Exposure to latest technologies in IT industry. Having experience with Sultanate of Oman for two years, dealt directly with PDO.

Testing and Commissioning •Turnkey Projects• Construction Seven years of International engineering experience, with particular emphasis on Fertilizer, Steel, and Power Utilities related projects. Executed more than two turnkey projects as a key member in electrical engineering team

Heavy Equipment Operator - I have operated Heavy Equipment since I was fourteen years of age. I also have experience in reading grades and finishing slopes. Types of equipment operated: CAT DOZERS D4H TO D11 CATSCRAPERS 621E 631E and 621F

Resume for the post of Planning Engineer

I'm a competent and experienced pressure vessel & heat exchanger design engineer with excellent communication, motivational, organisational and interpersonal skills. An individual who possess a hands-on pragmatic approach to work, able to work alone or as part of a team.

Fresh Graduated

Seeking a fulfilling and challenging position that allow utilization of my skills and provide experience in the network and system administrator areas of Information Technology

I’m a graduate Civil Engineer with nearly 18 years experience in the Construction of Sewerage, Drainage, Sewage treatment plant, 880 MW, 800 MW Power stations, Major Pumping stations of Sewerage/Drainage/Portable water/ Seawater, Heavy industrial structures, Piling.

Millwright traveler, precsion, turbine, str.welder, mech, steel/iron work, machinist

Certified welding inspector(aws)

Electrical Engineer-Inspector-Surveyors

SETP WINPCS SYSTEM USING C++ CODES. MODIFY P&ID USING AUTOCAD, SCHEDULE USING PRIMAVERA. GATHER ALL ENGINEERING DATA AND LOAD ALL IN WINPCS BY DISCIPLINE BY SUBSYSTEM.CERTIFY COMPLETED SYSTEM, HANDOVER MECHANICALLY COMPLETED SYSTEM FOR COMMISSIONING. PREPARE ALL HAND OVER DOSSIERS BY SYSTEM.

New Construction Surveys, Surveys on Jack-up rigs, Drill Ships, Semi-submersibles, Tankers, Bulk carriers, Offshore support vessels, Vendor Surveys, Welding and NDT Inspector, presently under training as ISM/ISPS Code Auditor

Engineering CADD Technician

For the past Nine years I have been working as a Land Surveyor, I have acquired persuasive techniques that are needed to become a specialized Land Surveyor for buildings and infrastructure.

Seeking full time position in the field of Structural Engineering and Geotechnical Engineering utilizing my skills in the analysis and design of structures.

I am interested in applying for a position as a Health & Safety Technician. My expertise lies in the design and implementation of safety programs for the Oil & Gas, Mining, and Construction industries as well as Refinery/Power generation facilities.

Geologist, supervision on drilling and grouting

Preparation of plan, profile, detailed engineering drawing using AutoCAD, AutoCIVIL,Word and Excel etc including Construction supervision for road and bridge works.

Professional Engineer with 8 years experience in construction/ project management; mainly field engineering, scheduling, equipment procurement, project control, contract administration, constructability review and on site project coordination for EPC projects with industrial contractors.

Profile: • Multilingual French MSc. student in mechanical design and production. Able to work on own initiative or as part of a team. • Seeking a full time position in the field of mechanical design and willing to be relocated in USA.

I would like to continue working in the safety and environmental field. My stronger attributes are in the safety field, but I do have several years experience dealing with environmental issues.

A proven professional with the ability to grasp new tasks quickly and efficiently.

Seeking a career with a company, that will utilize my skills. I have been with Nooter for 13 years and feel it is time to move on to a company that is looking for a fresh mind. I feel that being a 33 year old Project Manager on a $36 project has to say something about myself and my work performance.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [ 41 ] 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out