Resume - repairing,overhaulilng,diagnosing,servicing and troubleshooting of heavy duty ma...

Misco Jobs

Resume #88277

CONTACT INFORMATION:
View contact information...

Heavy Vehicle Mechanic with huge experience in performing skilled mechanical tasks in the diagnosis of malfunctions,preventive maintenance,repair,modifications and overhaul of mechanical and hydraulic.
SUMMARY OF QUALIFICATIONS.
* More than 20years of experience.
* Great understanding of the full range of procedures and technique used in servicing, repairing and maintaining Vehicles and equipment such as heavy trucks, construction equipment, grounder maintenance and forestry equipment, and related equipment and accessories.
* Profound ability identifying and resolving the nature and extent of malfunction or damage.
* Sound ability to inspect new vehicle and equipment for compliance with contract specifications.
* Excellent ability to identify the full range of risks and liability implication associated wit the work and take appropriate action to minimize those risks and refer organization liabilities to supervisor.
* Great understanding established safety practices and equipment care procedures and demonstration ability to instruct others in such practices and procedures.
* Profound knowledge of mechanical principle and theories.
* Uncommon skill in the use of hand and power tools and equipment used in the repair and overhauling of heavy trucks and equipment.
* Exceptional ability to prioritize can work and meet project and program deadlines.
* Proven ability to assist on the planning, coordination, and monitoring of projects and programs in assigned area of responsibility.
PROFESSIONAL EXPERIENCE

A.J. FANJ MINING & CONSTRUCTION COMPANY. Obuasi, Ghana
Field Mechanic. 2002- present
* Direct and participate in the repairs maintenance, and Servicing of A.J. Fanj Construction Vehicles and equipment such as trucks, automobiles, Construction Vehicles and equipment such as trucks, automobiles, construction equipment, grounds maintenance and forestry equipment, and related equipment and accessories.
* Direct and participle in the timely and acierate determination of the nature and extent of malfunction or damage of equipment.
*
METRO STAR WOOD PROCESSING COMPANY. Takoradi, Ghana
Heavy Vehicle Mechanic 2000-2002
* Repair and servicing of trucks, cranes, and fork lift.
* Performed preventive and corrective maintenance on all metro wood processing company heavy- duty equipment.
* Maintained all vehicles and equipment in strict compliance with manufacturers, specifications and federal and state safety regulations. Vehicles and equipment include vans, pick up, truck, class co. 7 and 8 trucks, aerial devices, boom trucks, solid waste refuse trucks, motor graders, backhoe, waders, paving machines, asphalt grinders, portable cranes, fluster trucks, tractor- trailers and fork lift, tompatter, caterpillar.

GENERAL DEVELOPMENT COMPANY. Takoradi, Ghana.

Heavy Vehicle Mechanic. 1988-1996

* Inspection of Heavy duty machine in the company
* Repairs diesel & Servicing diesel trucks, cranes, compressors, excavators & fork lift.
* Diagnose and troubleshoot mechanical problems in caterpillar

EDUCATION

TAKORADI POLYTECHNIC
Automobile engineering 1986-1988

TAKORADI POLYTECHNIC
Auto – Vehicle (Technical Part I) 1991-1992
ory including past employers, employment dates, position held, responsibilities, and major achievements.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 4812)

Go to Search Parameters...

Brief Description

A strong technical background is complemented by practical financial, managerial, commercial, and communications experience developed in worldwide assignments.

A. CIVIL STATUS DATAS

Engineer for Power System Analysis, SCADA/EMS chief engineer

repairing,overhaulilng,diagnosing,servicing and troubleshooting of heavy duty machines,and other equipment.

Over 23 years of rich experience in Technical Training, Erection & Commissioning, Production Planning and control,Safety,Environment,Health, and Quality in the fertilizer industry and Petrochemical industry seek suitable new assignments in Training and Development in Fertiliser,Petroleum,Petroche

concrete/steel laborer, welder, machinist, truck driver.

PROFESSIONAL SKILLS: AutoCAD (All Old & Latest Version), Aconex (Online Document Management System) , MS-Word , MS-Excel , MS- Power Point and Internet etc.

•Knowledgeable in PLC troubleshooting ( Allen Bradley & Siemens Step 7, Omron and Keyence). •With experience in designing low voltage control systems. With experience in machine servicing and troubleshooting •Knowledgeable in Pneumatic & Electro-pneumatic system troubleshooting. •With background in

Geolgist having 2 year experience in construction

More than 15 years experience as a Commercial Manager, Contract Administrator and Quantity Surveyor working with Main Contractors and Consultants in the U.K, Middle East, Caribbean and South East Asia on a variety of Building, Oil & Gas, Civil, Power and major infrastructure projects.

A business development professional with skills in strategic management,project management,communication and public relations,negotiating skills.

Design and construction in bridge and road

D.A.E in Electronics and from last 7 years i am working in the field of CCTV & SECURITY SYSTEM as a SUB ENGINNIER +SALES ENGINNIER IN SAUDI ARABIA

Experienced in drafting commercial buildings, residential for permit processing and for shop drawing.

I am a mechanical engineer with 10 years experience in Material handling, Steel structurals, PEB, Steel buildings industries

Architect/landscape designer/graphics person

Project Control Engineer (Planning, Claims and Cost Control)

6 years from Military with lots of surveying .

Seeking work as heavy equipment operator. Willing to travel. Excellant references.

I'm an civil engineer with 6 years working experience which involving in residential and commercial building contruction as well as segmental bridge and cable stay bridge construction. I'm now being employed as assistant resident engineer for Penang Bridge Cable Stay Replacement Project.

Co-Ordination with all agents & Sub-contractors.

Effective in Inspection Trends and Hazards Identification as per OSHA requirements and standards. Has good ability in presentation of safety reports to higher authorities

Extensive experience in the construction industry in the field of architectural and civil/structural works of residenses, townhouses, condominiums and commercial buildings including interior and exterior finishing details. A highly motivated project supervisor, proven ability to solve site problems.

Occupational Health And Safety Professional, Post Graduate Cert. In OHS&E Management

NACE Corrosion Specialist, Chemical/Mechanical/Consultant , Corrosion Engineer

A dynamic, Mechanical Design/Process Engineer offering over 20 years of outstanding experience in Machine/Tool Design and Project Management. Successful problem solving skills with the talent to transform complex design criteria into simple design solutions.

Looking for growth

Have one year job experience as a Ship design and Ms. degree in Naval Architecture subject .

Electrician Technician

bachelor of engineering (mechanical)

Direct and supervise work of subordinate members of surveying parties.

A highly motivated and dynamic Civil engineer with 10 years of experience in designing commercial and industrial structures. I am looking for a position of Civil Engineer/ Design Engineer in an organization where my experience and knowledge can be used to the best.

Have more than 10 years working i construction firm in Singapore as a M&E trades

Over ten years hands -on experience in XRF spectrometry in cement and steel industry

QUANTITY SURVEYOR

I believe that my key qualities are my excellent interpersonal skills and strong communicative ability, combined with my talent for effective organisation and prioritisation.

MBA in SCM, Excellent Command in MS Office.

5 years working experiance as a QA/QC Engineer

Senior manager maintenance of Drilling water well & Mining drills and Screw compressors, man power Management, Guiding and training the service engineers, maintaining records and monitor the performance

Willing and able to perform ones job with less supervision

3d visualizer, archl draftman, interior designer, renderer, max/viz/photoshop/ vray, architect

I’m experienced metal fabricator/boilermaker with skills in fabrication, assembling, constructing, installing, erecting, demolish, repair, marking out, aligning and maintaining a wide variety of vessels, tanks, towers, boilers, hoists and other structures.

i m very hardworker

Civil Surveyor, GPS survey control, Mining and Tunnel Surveyor,Leica Survey Instrument

I have worked in the area of Geological and Geotechnical Engineering for over six years now. I am a quick learner and can adapt to other earth engineering fields. I would be a valuable asset to any firm that would give me a chance at employment.

31 yrs. old, 13 yrs heavy equipment accident free operation including all dozers, graders, scrapers, etc etc. Currently mainline hoe operator (345bl) thousands of hours roadbuilding, loading trucks and laying pipe. Extensive experience with gps and laser grade systems. Ability to cut grade.

i have 3 years of experience in structure analysis and design for industrial structures, substaton structures, Material handling plant structures. i am having strong hand on STAADPro and Autocad software.

Knowledge in Project management skills like Production control ,Costing ,Project control /Expediting ,Scheduling(Using MS Project), planning ,Preparing Bill of materials ,Procure materials ,Sub contractor control ,Quality activities ,Documents review, ITP preparations, Client meetings ,Design involv

POLYTECHNIC INSTITUTE OF BUCHAREST, FACULTY OF AIRCRAFT ENGINEERING-MECHANICAL ENGINEER-HIGH DEGREE GRADUATE

skills and experience in appointments ranging from QC Inspector, to QC Engineer in the field of Oil and Gas as a ME

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out