Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #88655
next resume »»
CONTACT INFORMATION:
Cameco Corporation/Uranium Conversion Facility
Port Hope, Ontario
April 2008 to December 2008 - May 2009 to Present
Nuclear Energy Worker/Chemical Operator
. completing log sheets and reports; monitoring and inspecting plant equipment; operating 20 ton overhead crane; operating bucket elevators and screw conveyors; performed plant safety checks; preventive maintenance; counter balance forklift; completing work orders for maintenance; lock-out/tag out procedures; waste recovery/evaporator operator; and gaseous effluent operator.
Rohm and Haas Specialty Chemicals
Scarborough/West Hill, Ontario
November 2005 to April 2008
Bulk Terminal Technician/Chemical Process Operator
. loading tanker trucks and rail cars; operating drumming line packaging rums and totes; multi-tasking; coordinating tasks using SAP system; training operators; Ottawa shunt truck training; counter balance/Raymond reach forklift training; transferring and some blending of batches; Transportation of Dangerous good training; propane filling; confined space training; fall arrest training; Plant Emergency Response Team Captain-NFPA 472 Training; Certified Occupational Health and Safety member
Neenah Paper/Kimberly Clark
Terrace Bay, Ontario
February 1993 to June 2005
Pulp Department (1994 to 2005)
. bleach plant process operator; bleach plant helper; R-8 chemical process operator – chlorine dioxide generator (D.C.S.); performed process sampling and laboratory testing; trained junior staff; chemical uploading – sodium chlorate, sulfuric acid, salt rail cars, hydrogen peroxide and methanol rail cars; brown stock screen room process operator; utility person - #1, #2, and #3 paper machine rooms; forklift/clamp truck operator-shipping pulp bales; area assistant – lock outs and vessel entry.
Wood Handling Department (1993 to 1994)
. wood room helper; drum feed conveyor operator; utility bark and grit operator; bobcat operator.
Laborer – shut downs
. trades helper (pipe fitters, millwrights, instrument shop, welders, sheet metal shop and oil shop
. fire watch; confined space watcher; scaffolding helper (carpenter shop).
Inmet Mining Winston Lake (formerly Minnova Inc.)
Schreiber, Ontario
October 1990 to February 1993
Underground Mining
. remote scoop tram/LHD operator (6cbm capacity); rock break operator; forklift operator/services; cage tender/shaft man; jack leg drilling experience; blasting experience; construction crew laborer; 40 ton haulage truck operator
Mill Laborer – surface (Minnova Inc.)
. mill operator – relief person; grinding circuit
Summary of Industrial Experience
. Fork lift-shipping; Scissor lift-maintenance; Bobcat-wood handling; Multi-Trades helper; Chemical unloading; Operations – D,C,S, Operator; Fall Protection Training (Arrest); S.M.A.R.T.-Safety Loss and Control; Techniques Training; Team Works; Fire Watch; Confined Space and Lock out Procedures; Drilling and Blasting (Jack leg drill); Production; Development; Haulage Truck Operator; Underground service department; Shaft service department; Construction department; Remote Scoop Tram/Underground LHD Loader Operator; Rock breaker operator.
EDUCATION:
Lake Superior High School
Terrace Bay, Ontario
1985 to 1989
. Ontario Secondary School Diploma
Certificates:
. Ontario Secondary School Diploma
. Confined Space Training
. Propane Handling and Filling
. Raymond Reach Forklift
. Counter Balance Forklift
. Scissor Lift
. Bobcat
. WHMIS
. Transportation of Dangerous Goods
. Ontario Ministry of Training Transcript
Underground Common Core Modular training units 1-6 and 10
hard rock mining skills
. Surface Common Core (N.O.R.C.A.T.)
. St. John Ambulance First Aid-Level C C.P.R. - Defibrillator
Hobbies:
family activities, playing hockey, weight training, meeting new people, learning new ideas, music, movies, outdoor activities, camping, fishing.
References:
Will be provided
«« previous resume
next resume »»
Search Results (Resumes 4151 to 4200 of 4805)
Go to Search Parameters...
Brief Description
Electrical engineer, Matlab, PLC, Labview
Chemical or Laboratory Technician in Edmonton Alberta
Twenty nine years experience in Project Management, Quality Control, Quality Assurance, Engineering, Technical Research and Development, Auditing, Vender Surveillance, Metallurgy, Welding, and Inspection.
I'm specialized in developing new water based decorative paints and in modifying existing decorative paint formulations.
B.Tech in Chemical Technology with Experience in Technical Sales and Services
Qualified Quantity Surveyor with experienced in Cost Planning, Estimating, Budget Control and Monitoring in building, construction and semicoductor industries.
construction/process plant cost estimator, certified project scheduling, projects control
I have gained in excess of twenty five years experience in the construction petrochemical industry which includes offshore and onshore oil & gas projects for such companies as Shell, Arco, McDermott, Hyundai, ConocoPhillips, Premier Oil, Saipem, Unocal and Statoil
Instrument and Electrical Technician/System Integrator with over 10 years of experience in Control Systems, MS SQL and Microsoft Office. Proficient in troubleshooting VFD’s, Process Control, HMI design, construction and troubleshooting of industrial servers and workstations/communications.
Dual Post Graduate Mechanical Engineer with 10 years of experience
Skills - Design, Procedures, Projects, Commissioning, Calibration, Maintenance. My qualification is Instrument/Electrical Engineering Technician. I have in Nuclear Power Plant, Chemical, Mining, oil and Gas Industry in Europe and Australia
Experienced Offshore Plater - Coded Welder. Norwegian Survival Certificate, European Survival Certificate, Mexican Work Visa
In May 2009 I will graduate from Texas Tech University with a Masters Degree in Transportation Engineering, with 3.66 GPA. With over 1 year of experience in Commercial Project, I have developed a strong background in Planning and designing.
Mechanical Engineer with 4+ years of experince in construction of power and oil & gas sector
Perform other work as required. Excellent team worker, function well under pressure, highly motivated toward goal achievement, self motivated, eager to learn, honest and hardworking.
If you read my work history you will see a great amount of experience in very relative systems to the position I am applying for. I can't say I know it all, but I have been exposed to most of it. As Manager or Superintendent, I have administered and negotiated labor, materials and services.
Mechanical Engineer with 10 years of experience in QA/QC, and MWD/LWD/Directional Drilling services
Repairing & Troubleshooting Computer Hardware, Printer’s and UPS etc. Data Communications & Computer Networks (Networking using windows OS 95, 98, NT, Active Directory & ISA Server). Familiarity with LINUX OS (Installation & Configuration). Electronic Devices and Circuits. MS Office.
Degree in Geological Sciences. Experience in laboratory of total and clay mineralogy analysis, sedimentology and petrography. Use of stereomicroscope and polarizing microscopy. Good knowledge of Office programs and basic AutoCAD and ArcGIS program.
Diesel Fitter (Heavy Earthmoving), Maintenance Planner (Mobile), Project Manager (MARC), Maintenance Supervisor, Workplace Trainer and Assessor
Commissioning Engineer with substantial experience as Commissioning Process Supervisor. Proven ability to provide the highest level of corporate services while consistently reducing time of work. Fully knowledgeable in all aspects of Computer Science, planning, activities coordination. ITA-ENG.
Over 16 years of installation and troubleshooting experience within the instrumentation field in various chemical plants. Also have four years of process chemical operating, troubleshooting, and making recommendations for plant safety, quality and quantity of plant production.
Broad experience in Petroleum Exploration and Production With cross-functional expertise in Operating, Commissioning, Maintenance, Testing, Training and Safety / Environmental Compliance.
Network Engineer
Arc view 3.2a, ERDAS Imagine 8.7,Arc GIS 9.1, (All extensions),AutoCAD/DeskMap,Ms Office ,DEM,Spatial analysis,DBMS
Have 12years of experience in foods, cleaning, warehouse etc.
Deployed as Armed Response Vehicle crew to incidents which require firearms support, including dedicated armed patrols to specific areas of London.
Business Process Modeling • Process optimization • Project management • Lean Six Sigma • Predictive and Simulation modeling • Manufacturing reengineering • Data analysis • Metrics development and reporting • Organizational development • Sales effectiveness • Supply Chain Management • Patent engineer
Experience working Saudi ARAMCO & SABIC for Oil & Gas and Petrochemical projects as QC inspector or supervisor. Familiar with International Standards like NEC, NETA, IEC, NEMA, IEEE. Excellent in Computer work hardware & software. Experienced works in different field of Electrical Engineering.
General manager of Services Company / QHSE and Management systems Oil and Gas sectors
Lead Planner, BS Industrial Technology, SAP PM Module Expert, Primavera P3/3e Hands on Experience.
SKILLS - HSE issues, mechanical engineering, fluid metering, instrumentation, ability to work and learn fast. QUALIFICATIONS - B.Eng. (Mechanical Engineering) , PGD (Mechanical Engineering)
I am able to effectively perform set tasks, successfully fulfil the task objectives and meet their dead-lines. I report information to the necessary authorities by means of written and/or verbal reports which are reliable and accurate.
Passion for safety; Proven skill to integrate owner/client needs with worker abilities; Deep intuitive understanding of motivations/goals behind differing party's actions; Experience-driven, reality-based understanding of varying industries and their roles in global development
QC Mechanical, API 570, API 653, CWI & NACE coatings inspector
Expert in Natural Gas and LPG Pipeline,Metering with 14 years experienced in operations and maintenance field. Lead a group of technician troubleshoot and maintaining gas facilities such as valves, cathodic protection,pipeline inspection, regulating station etc..
I am an American, with over 27 years of experience in the Oil & Gas Industry, with 11 of those years worked internationally. Qualifications include postings at various organizations as Head of Field Operations, Construction Superintendent, Operations Specialist, and AWS Certified Welding Inspector.
30+ yrs experience in the Oil, Gas, and Construction industries (within Onshore, Offshore and Overseas and in Senior Management & Shop-floor positions upon a Contract), and fluency in French, Portuguese and Spanish.
Free!
Chemical process operator, Heavy equipment operator, Emergency Response Team Captain, Health and Safety member,
I have four years of hands-on benchwork experience in chemistry labs in University of Houston as a research assistant.
Technical, Managment, communication. Skills
Field/Kind/Skill: Accounting, Financ Statement, Tax, Information Manufacture System; Microsoft Word, Excel, Power Point, Access:Visio, Adobe Photoshop, Web Design, SPSS; SAP Business One, Daceasy Accounting & Payroll: Internet
maintaining and operating various types of heavy equipment in the forest industry, building industrial roads, road deactivation
Proven GIS Specialist, Project Manager and Dynamic Force for the Successful Implementation and Transformation of GIS Standards and Systems
Currently working as a procurement engineer in an Engineering Firm in Tokyo Japan engaged in EPC contract works for Petrochemical Plants with minimum 3 years experience
Talented and value driven professional with 9+ years of experience in health, safety, environmental and quality management. Motivated by challenge and rewarded through key initiatives that aid continuous improvement, as well as profitability and productivity.
Eight (8) years experience as heavy equipment operator local and overseas
My technical specialty lies in installation, troubleshooting and repairing Electrical, Mechanical, Automation production problems. I can install conduit, cable tray, main panels, and sub-panels, distribution transformers, ground systems and, wide variety electro-mechanical devices
Safety Professional with over 25 years experience and dedication to the industries with a Safety first and foremost attitude.
Masters Degree in Chemical Engineering
First
Prev
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
[ 84 ]
85
86
87
88
89
90
91
92
93
94
95
96
97
Last
Seach Parameters
Change search parameters...
INDUSTRIES:
Construction;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com