Resume - QualificationsI have worked in the repair related field for over 23 years. I own...

Misco Jobs

Resume #9059

CONTACT INFORMATION:
View contact information...

Objective
I would like to obtain a position working in the international market place as a mechanic or a working supervisor doing fleet maintenance, generator repair or heavy equipment repair.

Qualifications
I have worked in the repair related field for over 23 years. I owned and ran a repair shop for the last 13 years working on both gas and diesel repairs. I managed between 10 to 15 employees year round as well as the day to day operations of the business. I worked in the shop as well as in field repairs. I have worked up on the North Slope in Alaska's oil fields doing on site repairs as well as many other sites around Alaska. I am up to date with the use of the latest diagnostic equipment scan tools and lab scopes. I have used M.P.S.I., SNAPON and O.T.C. scanners doing on board computer repairs. I have done all types of electrical repairs and extensive wiring. I am a self starter and work well without supervision. I am very accustomed to working long hours each day and working until my task is completed. I am a very good problem solver and work well under stressful conditions with others. I worked in a Kuwait in a D.S. maintenance shop for K.B.R. until March of 2004. I then transferred to Iraq to to work in the generator dept. in at Babylon. In April I was made a Forman and was then promoted to acting supervisor for all the coalition sites in June. I in this position was required to aid all the mechanics of the other sites in the repairing and the maintenance all generators as well as the ordering of required parts.

Education
I completed high school then attended Denver Institute of technology in Denver Colorado. This was a two year trade school. It was a gas and diesel technology course with heavy electrical classes. I then attended the University of Alaska; there I took many general education classes with a emphasis in math and science. I have taken numerous trade classes in computer diagnostic, air-conditioning, and fuel injection repairs as well as the use of lab scopes and scan tools. Each year I would try to take 3-5 classes in order to stay current.

Relevant Experience
I have worked as a mechanic for over 23 years. I have worked in both heavy equipment repair as well as more complicated fuel injected computer controlled systems. I have lived and worked In many remote parts of Alaska as well as Iraq and Kuwait and fully know what to expect while working in remote locations as well as other countries. I have spent a great deal on my working time a lead person at my job and have no problem interacting with others.

Work history
2-01-04 to present I went to work for KBR in Kuwait in a D.S. maintenance unit for the United States Army working on light to heavy wheeled vehicles. I did electrical repairs motor installs transmission replacements, fuel injection repairs and on board computer repairs. I was transferred to Iraq at the end of March and at that time I went to work in the generator dept as a mechanic/Forman. I maintained and repaired generators in the range of 5 kw up to 1250 kw prime power units. I order all the required parts for the dept as well as new generators. I set up a maintenance program for all seven sites in the coalition sector and assist in repairs at other locations if the mechanic at that location is unable to complete the required repair. We work on Perkins,Volvo, Cats and Cummins diesels generators.

10-01-91 to 1-31-04 I worked and owned Palmer Repair. I did light and heavy line repair work. I did all types of repairs to include fuel injection, motor replacement, transmission replacement, electrical repairs, and computer systems repairs. I worked on both gas and diesel engines minor and major repairs. I was I.M. certified to test and repair emission systems as well as air-condition repairs. I reprogrammed computers on late model trucks and cars to include both gas and diesel vehicles. I also worked on a variety of different equipment to include generators, and tractors. I have extensive experience with the use of lab scopes in the commission of derivability repairs to include power stroke diesels, 6.5 international diesels, and other manufactures to include Chevy, Dodge, Ford, and International.

02-15-89 to 9-15-91 I worked at R&R Repair in Alaska. I did all types of general repairs on both gas and diesel engines. I did all types of heating and air condition repairs. I did I.M. testing and repairs which includes fuel injection, computer diagnoses and electrical repairs. Most of the work at this shop was light line with a few transmissions and engine overhauls.

Personal information
I am 42 years of age and in very good health. I am single with no children. I like to travel, I do not smoke or use drugs of any kind.

Reference:
Will be provided.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2901 to 2950 of 4805)

Go to Search Parameters...

Brief Description

Piping Engineer (Construction) Diploma in Mechanical Engineering Forteen years experience

troubleshoot and repair mining equipment,Electrical,hydraulic,mechanical,welding

PLC, SCADA, DCS, P&IDiagrams,Project Schedulling,Estimation,MS office

Project Manager/Manufacturing Manager/Site Safety

Senior Project Manager, Quality Manager, International experience

I hold a Master Degree in Civil Eng. – Canadian Equivalent and possess 17 years of professional experience in Project/Construction Managt, Design and Manfg of Structural Steel and Pre-Eng. Buildings. Regstd PE in Canada on August 05.

Experience in QA/QC documentation procedures and processes in a petro-chemical plant construction set-up covering various disciplines i.e. civil, structural, mechanical, electrical and instrumentation. Monitor and ensure that all required documentations are followed as per approved project quality

A total of 9 years of experience of which 3 years at Bharat Heavy Plates &Vessels Visakhapatnam a leading Fabrication Workshop in various capabilities of production, welding, inspection of materials, construction, planning, project engineering and informatics

I have 15 yrs experience in Mechanical, Strustrual, piping in projects& running field in Refinery, petrochemical, oil & gas, chemical, ship repair maintenance & new building as a Sr. mecanical engg., mech manager, Sr. piping engg.

Manage the Camp Administration,Team work skill,having attitude to manage.Result oriented & communication skills that to share to others

DEGREED MECHANICAL ENGINEER - QUALITY ASSURANCE – DESIGN – SERVICE – TECHNICAL SALES

ETAP Power System, PLC, NEC, ANSI, IEEE, NEMA, IEC, electrical testing & commissioning, Over twenty (20) years of hands-on experience focusing on High Voltage (HV) and Low Voltage (LV) Power Distribution System, project management, electrical engineering design, project coordination and supervision

Experience/Knowledge in: * Classification Survey * Statutory Survey * Ship Operation/Management/Audit * Shipbuilding * Ship Repair/Modification * Ship Design (Computer Aided-2D & 3D, Structural & Mechanical) * Quality/Safety Management & Certification * International Standards * Project Management

Qualified heavy diesel machanic

An experience individual with excellent knowledge of Freight handling / Exports Management with the objective of achieving organizational goals and making it a strong profit center, seeks an opportunity in managerial capacity.

More than 15 years of environmental / safety experience in mining industry; 1.5 years of experience in exploration by drilling as geologist; 2.5 years of experience in exploration by drilling as environmental / safety specialist

Kahramma and Qatar petroleum Authorised Electrical Engineer with skills of Automation and 1year Experience in EHV U.G cable installation inside live substation and in infrastructure.

Bachelor of Electronics Engineering ,14+ yrs of experience in designing and commissioning complex programmable logic controller (PLC) based control Systems for Process and Machine automation.drawing tools like AUTOCAD, ORCAD.,SCADA Packages like Intellution-Fix32, Ellipse,

Business Management professional - travel, tourism, travel e-commerce and travel process outsourcing

A qualified and internationally experienced Mechanical Engineering professional graduated from Kirikkale University (Kirikkale/TURKEY) with a Bachelour of Science Degree in Mechanical Engineering in June 1997 followed by a Master of Science Degree in Mechanical Engineering from Texas A&M University

Free! Telecom and electronic engineer, specializing in RF, with over twenty years worldwide experience.

Auto Cad

I am BE (Mechanical). I am working as Assitant Planning Enginner In PECL at LNG Project Of Shell Gas Pvt. Ltd. at Surat

looking for a job

Dear Sir/Madam: I would like to explore the possibility of joining organization. The enclosed resume will provide you with information concerning my abilities, employment history, and educational background.

Looking for work as a civil engineer

Strong computer skills utilizing CAD, GPS & data collection systems. Analysis of survey data and its use combined with aerial photogrammetric surveys. Quality control of digital mapping. Layouts for construction works. Management of multiple survey crews.

Civil Engineer seeking position in the oil Business or Construction

HR Management, Project Management, Consultant

Having worked on projects across Canada and in Mexico, I have a diverse background in Health, Safety and Environmental issues which includes everything from full HSE Management System creation to managing all field work, investigations, HSE Compliance, training, environmental management, etc.

Electrical Engineer with over 21 years' varied experience in Projects- contracts, engineering, construction, project management with EPC-MNC, Large Process/Chemical and Electricity Utility companies

Mineral Engineering Technologist, 6 yrs experience with International geotechnical consulting firm, Mining Engineering Degree expected 2010

I am a Piping / Pipeline Construction Manager or Superintendent in the Oil and Gas Sectors, I have a wide and varied experience of overseas Projects, with expeience of Construction, Maintenenance and Production work on and offshore.

DIRECTOR OF GLOBAL SOURCING / Asia Procurement Strategist • Multi-cultural Relationship Development • Product Innovation / DEDICATED TO HELPING COMPANIES SUCCEED IN ASIA

I have more than 10 years experience in document control , especially electronic data management system, also worked in national and international construction and engineering companies.

Autocad, Primavera Planner, Excel, photoshop My special skills.

OFFSHORE C & I

QualificationsI have worked in the repair related field for over 23 years. I owned and ran a repair shop for the last 13 years working on both gas and diesel repairs. I managed between 10 to 15 employees year round as well as the day to day operations of the business.

Equipment Operator experienced with dozers, graders, scrapers, and snow removal.

18-years of Middle East work experience on Major Projects Documentation in Oil & Gas Industries. Capable to operate different EDMS programs and familiar to Vendor & Design Technical Documents and Engineering Drawings.

Chartered Accountant

I have vast experience in pipeline engineering & integrity involving smart pig, pipeline cleaning, coating. Also, I have experiences in decommisioning of pipelines and skills in engineering maintenances involving static equipment, Corrosion & OCTG.

Civil engineer (having good skill in building design and drafting using autocad application, surveying and plotting and drafting survey map using auto cad land development, structure design, have good knowledge in GIS and HEC-RAS, etc)

Seeking Office Administrator/Administration Asssistant. post -10 Years experience. University Graduate

PhD environmental engineering/bioremediation, MSc environmental diagnostics, BSc (Hons) Biology

Licensed Professional Engineer registered in British Colombia and Alberta, and able to be registered in other Canadian, U.S. and international jurisdictions.

HR Generalist - Manual Payroll, employee Personal filing, Documentation, MOM related work, Policies & Procedure framework, Organizational Develoment, Performance evaluation & Appraisal, Issuance of Official Letters, Employee Engagement & Communication, Employee Retention, Training & Development, etc

Manage the timely preparation of financial statements, budgets, cash flow, internal management reports and reports to overseas investors.

To offer a background 0f 15 years experience in EPC & Commissioning including 4 years in construction management and 4 years in project engineering & 7 years in field of construction projects with proven strength in inspiring the confidence and trust of Owners & others of Petrochemicals projects/ref

Canadian CGA and UK ACCA designations

First Prev 51 52 53 54 55 56 57 58 [ 59 ] 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 Last

Seach Parameters


Change search parameters...
INDUSTRIES: Construction;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out