Resume - I Am A Mechanical Engineering Graduate Passed Out In 2004. Right Now I Am Doing ...

Misco Jobs

Resume #34080

CONTACT INFORMATION:
View contact information...

A confident communicator, I integrate easily into teams, though I am equally happy to work alone. I am a quick learner, logical thinker with an analytical mind and enjoy the stimulation of a challenge. I like variety and am adaptable in different situations, to which respond with enthusiasm and a sense of humor. I am computer literate and am always keen to learn something new.

PROFESSIONAL QUALIFICATION
* July 2005(Till date): Pursuing one-year full time PG Course in Computational Engineering from School of Advance Engineering &Information Technology
(A MoU between IIT M, Chennai & BHEL, Tirchy)
www.saeit-tiruchi.com

* August 2004: B.Tech in Mechanical Engineering from J.M.I, New Delhi,
Aggregate 79.89%. Division 1st.
Secured First position in the class of sixty students.
http://jmi.nic.in/

EDUCATIONAL QUALIFICATIONS:
* June 2000: Senior Secondary School Examination from AMU, Aligarh,
Aggregate 64.8% Division 1st.

* June 1997: Secondary School Examination from Zila School, Muzaffar Pur
Aggregate 63.86%. Division 1st.

EXPERIENCE:
Worked in TRACTORS INDIA Ltd., Kolkata, as a Management Trainee. First two months of training was self-learning process consisting of basic automotive knowledge (e.g. Engine, Transmission, Hydraulic Systems, Electrical & Electronic Systems, Differential, & Pneumatic Systems), Earthmoving Concepts, Equipment selection, Genset selection, and Crane & Reachstacker selection. Then posted in Plant in Design & Engineering Department. Done stability check calculation for different models of crane. Worked on ANSYS 6.1 for analysis of crane components.
www.til-ltd.com

Project Work: Final year B.Tech Finite Element Modeling For The Modal Analysis Of T6 Turbine Blade Using ANSYS
In the present work, the Modal Analysis of a T6 Turbine Blade is carried out by developing a finite element model using ANSYS. This analysis is required in determining the feasibility of a turbine blade under operating conditions. The first twenty natural frequencies and respective mode shapes are determined by the most accurate, reliable and fast analysis software. These results are then compared with those obtained by the analytical method. The animated views of Turbine blade for all the mode shapes were generated using the software. An effort has been made to identify the most critical mode in terms of deflection that may hinder the normal operational use of the turbine. The stresses at the different nodes were also determined to identify the critical regions in all the modes of vibration and to the most critical mode shape in terms of stress levels.

AWARD:
2004 Got Jamia Merit scholarship for 1st Position in B.Tech (Final)
2004 Got Jamia Teachers Association scholarship
2003 Got Jamia Merit scholarship for 1st Position in B.Tech (3rd Yr)
2003 GATE 2003 percentile score 90.44
2002 Got Jamia Merit scholarship for 1st Position in B.Tech (2nd Yr)
2002-04 Got Merit scholarship from Foundation for Social Care

EXTRA CURRICULAR ACTIVITIES:
2002-04 Chairperson of SAE Jamia Collegiate Club
2001-02 Program Chairperson of SAE Jamia Collegiate Club
2000-04 Active member of ISTE Jamia chapter
2000-04 Played in Inter class Cricket Tournaments

SKILL:
Modeling: Pro/E Wildfire 2.0, CATIA V5 R13,
Analysis: ANSYS 6.1, ABAQUS 6.4-1, CAESAR II 4.5,
Drafting: Auto CAD 2000
Language: C, C++
Operating: Windows 2000

REFERENCES:
Available upon request

MEMBERSHIP:
- American Society of Mechanical Engineers
- Society of Automotive Engineers
- American Society of Civil Engineers
- American Association for Advancement of Science

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 1030)

Go to Search Parameters...

Brief Description

I Am A Mechanical Engineering Graduate Passed Out In 2004. Right Now I Am Doing My Pg In Computational Engineering. I Know Multiple Softwares Like Ansys, Catia, Pro E, Abaqus, Caesar, CFX, C, C++, AUTO CAD etc.

ARC GIS, VB6.VB.NET, SQL, ARC OBJECT

Hello my name is Jonathan Gaydos and thanks for takeing the time to read my resume,I have experience on many types of equipment from very small cats & hoes right up to some of the largest mining equipment in the world.I am also used to working in remote locations.

GOOD COMMUNICATIONAL SKILL WITH GREAT KNOWLEDGE IN MANAGEMENT IN SAFETY

Proven capabilities in HSE supervision and training: this includes heavy construction, onshore & offshore drilling and diving with an assertive personality sensitive to multicultural & multi-national environments with the ability to work and train workforces in remote and harsh environments.

IT expert, Helpdesk Support, Server Administration, IT Manager

GIS–Mapinfo; Other IT: graphics, spreadsheets, databases, word processing; Fieldwork – mapping, sampling, drilling, logging; Spatial analysis– geophysical data / image processing.

Commission of new diesel and electric fire pumps per NFPA 20

BSc Electrical Engineer; PLC Programmer, Maintenance Engineer, Production Manager

MBA Industrial Managemant, MSc Engineering and Graduate in Mechanical engineering, Experience in CAD/CAE - Finite Element Analysis and Modeling using MSC Nastran, Patran and Hypermesh

Maintenance professional, Electrician, Steam, Safety, Instumentation, multi-skilled

MBA - International Business, M.Sc - Environmental Engg, B.Tech - Chemical Engg; Knowledge of ISO 14001, ISO 9001, OHSAS 18001, environmental regulations, sustainability issues, CSR, chemical processes, environmental protection technologies; Possess project mgmt, consulting, business strategy skill

Dual masters degree in mechanical and manufacturing engineering

General computer repair, uasage, modification skills.

I am diploma graduate in business adminstration and mangement, having work with company both in private and public sector, I am capable of handling any project either in normal or a stressful atmosphere.

Information Technology, IT Operations & Implementations Regional Manager

Experinced Pre-commissioning, Commissioning, Completions and Handover Coordination. Additional experience in Human Resources.

Accounting, management. I am fluent in English both spoken and written. I am mature, attractive, dynamic, highly motivated to work hard in getting good results, willing to work as a team, creative individual, who will try to do the best for development and growth of the company.

I am a material planning professional with extensive experience in Production Planning, Scheduling, Inventory and Materials control, Document controlling and Purchasing.

As listed on my resume I have experience in landfill remediation and operation, groundwater quality analysis, groundwater sampling, oversight, knowledge of environmental regulations and investigations, plan and report preparation and experience in performing site investigations to assess hydro-geolo

B.E, Electronics and Instrumentation (2006) with 70 %. I am very much interested to make a good career with your esteemed organization. I did DCS, PLC & SCADA training from JRD TATA AUTOMATION CENTER & HONEYWELL, Pune. But willing to work on any technology.

FAA airframe and powerplant certified, BS and AS in Aviation Maintenance Science / Management AOC

Photogrammetry Sr. Cad Production Executive

Project Geophysicist (Mineral Exploration)

To be a part of your esteemed organization and prove myself dedicated, worthful and energetic in Mining and Reliability Engineering, that gives me scope to apply my knowledge and skills to the best and dynamically work towards the success and growth of the organization.

I am a qualified and experienced safety professional/officer.

An energetic, pro-active Human Resource Generalist with expertise in all human resources functions and skills in recruitment, relocation, immigration, employee relations, team leadership, facilitation and training. Fluent in English, Dutch, German and (elementary) French

Class A CDL, railroad equipment ie. spotter truck tandem dump truck, front end loader, fork lift, assorted types, sizes and hp tractors & mowers, snow removal, emergency & on call & work in extreme and inclement weather conditions, wiring, installation & preliminary programming of traffic signals.

I am a fresh passed out Chemical Engg (H) Graduate from one of the best universities of India i.e Kurukshetra university with 76.5% marks.

Bilingual Entry Level I&C Engineer

Geologist/Engineer, 4 years in environmental and information technology. Degreed in earth science and networking. Team oriented project management and support. Involvement: four mine development projects and hazardous materials. Desire a contract or permanent position.

Field engineer

Looking for o job with better condittions

AutoCAD "2D, 3D", Customer Service, Microsoft Office, Car Supervisor Engineer etc

Emergency fire rescue etc. Licence in France and followed of a large experience in overseas

I am an EH&S specialist to energy, industrial and commercial clients. I have experience in soil & water sampling, soil conservation, erosion control, remedation, reclamation of oilfield sites, environmental liability models, management systems and emergency response. I am an registered P. Biol.

Mechanical Engineering Technologist

OSHA certify

Safety, Environmental Health and Industrial Hygiene

Pursuing MBA Marketing. Completed BE Mechanical good at convincing people, selling skills, etc, good at computers, good communication skills

Petroleum Engineer & Geologist with strong knowledge and experience working for Oil & Gas companies, Oilfield Services and Engineering & Construction Companies.

BA-degree in Geosciences ( 4 years) graduated in 2000

Certified Public Accountant - Feb 2004, Bachelor of Business Adminstration - 1998

Computer Programmer, Database Administrator, System Analyst

Facilities and Administration

An organized, experienced, self-motivated individual, seeking an opportunity to work within an organization where quality and commitment to excellence are valued as well as to be a contributing team member where my abilities and experience can be a significant factor in achieving company goals.

Proven Experince in Sales and Marketing,

My leadership ability and my training on various Heavy Equipment.

Petroleum Technologist, Technical Support, Electrical Engineer, Oil & Gas Analyst

Manager Information Systems / Office Assistant / Data Entry Operator

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out