Resume - Over 25 Years of Crane/Equipment /Rigging + CDL Experience

Misco Jobs

Resume #42603

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE:
12/05 to Present - International Chimney Corp. at Virginia Power Station Dutch Gap – Equipment/Crane Operator
My Duties include: Operate Equipment/Cranes to pour concrete set rebar, and set equipment during erection of a 400 foot Smoke Stack.

08/24/05 to 10/02/05, Crane Operator, Fluor Construction at Virginia's Nuclear Power Station North Anna
My duties include: Operate Cranes and Equipment during nuclear fueling operations.

07/22/04 to 07/21/05, Heavy Equipment Operator/Crane Operator, Halliburton-KBR LOGCAP lll, Iraq
My duties include: Responsibility to assess each job upon arrival at the job site, supervise rigging crew, and operate cranes, forklifts and any equipment needed to complete the mission. Some missions include: Pour concrete, and erect concrete barriers for force protection. Support the military with recovery of battle damaged equipment on or of the base. Support the transportation department in uploading and downloading equipment, and various construction materials.

05/17/04 to 06/15/04 Sales Representative, W.O. Grubb Crane and Equipment Rental- Richmond, VA. 23234
My duties included making calls on customers, size equipment for jobs, quote prices for equipment and projects, prepare lift plans for cranes and rigging jobs, and check jobsite for any hazards before any lifts were made.

01/24/04 to 05/12/04 Crane Operator/Equipment Operator, Babcock & Wilcox Construction, Inc. P.O. Box 665 Barberton, Ohio 44203 @ Virginia Power SCR Project, Chesterfield, VA.
Crane Operator (Night Shift) 18000 Manitowoc Crawler Crane (825-Ton) with 380' of Boom
Other Duties Included operating 100-Ton Grove R/T Crane, 75-Ton Terex R/T Crane, 55-Ton Terex R/T Crane, 22-Ton Linkbelt R/T Crane, Single and Double Drum Truggers, 10,000lb Forklift, and Material Elevators when needed.
My duties included making lifts of over 100,000lbs. @ 200' radius and 200' high during the early am hours due to strong wind conditions. Set equipment, pour concrete, unload materials, and operate Tractor/Trailer to move materials.

04/15/2002 to 01/24/04. Engineering Equipment Operator, WG-5716-11 U.S. Navy - Dahlgren NSWCDD. Dahlgren, VA. 22448
(1) Explosive Weight Handling Crane Operator:
U.S. Navy License Includes: 120-Ton Mobil Truck Crane, 65-Ton R/T Crane, Bridge Cranes, Boom Truck, Backhoe, Rubber Tire Front End Loader, Crawler Tractor Front End Loader.
(2) Explosive Material Handling Equipment Operator:
U.S. Navy License Includes: Diesel Forklift 20,000lbs. R/T Forklift 6,000lbs. Gas and Electric Forklifts 4-6,000lbs.
(3) Explosive Driver for Tractor/Trailer
(4) U.S. Navy License For Man lifts, Bucket Trucks
(5) Virginia CDL License and Medical Card

Typical duties include loading and unloading of ordnance from boats, barges, gun mounts, and transporting to test sites. Moving heavy material such as gun mounts armor plates to delicate or sensitive equipment as computers and other electronic equipment. Perform rigging duties, and drive trucks or tractor/trailer to move ordnance and equipment to and from test sites. Operate dirt equipment to clear areas dig foundations, pour concrete footers, floors, walls, and snow removal.

07/05/1987 to 04/14/2002 Operator/Dispatcher/Sales Representative, W.O. Grubb Crane and Equipment Rental. Richmond, VA. 23234
Supervisor Donald Simpson 540-846-1787
Started work with W.O. Grubb as a Crane Operator. I operated a variety of cranes and equipment to include: 10 thru 100-ton R/T Cranes; 15 thru 200-Ton Hyd. and Friction Truck and Crawler Cranes. Some duties included unload and set equipment, pour concrete, set steel, and operate Tractor/Trailer. Around 7 years later I was promoted to Dispatcher. My duties included dispatching around 35 operators to daily work assignments, drivers to move equipment, and take customer calls. About 5 years later I was promoted to Sales Representative. My duties were to make calls on customers, size equipment for jobs, quote prices for projects, prepare rigging lift plans, and check job locations for any hazards before any lifts were made.

1973 to 1075 Corrections Officer, Virginia Department of Corrections

1970 to 1973 U.S. Army, Honorable Discharge

EDUCATION:
2 Year College, Police Science, J Sargent Reynolds CC, Richmond, VA

TRAINING:
6 Year Operator Apprenticeship (Oilier)
U.S. Navy: General Crane Safety Course 40hrs. 5/10/02
General Crane Refresher Course 8hrs. 11/26/02
General Crane Refresher Course 8hrs. 11/05/03
Basics of Naval Explosives Hazard Control (AMMO-18) 40hrs. 10/30/02
Explosive Material Handling Course 10/30/02
Explosive Driver Course 12hrs. 11/15/02

AWARDS: U.S. NAVY
Outstanding Rating 2002/03
Performance Award 2002/03
Group Achievement Award (Pentagon Team Project) 2002/03

LICENSES/CERTIFICATES:
Journeyman Crane Operator License

Crane Operator Certification:
(CTS) Crane Testing Service, Inc.
2700 Goolsby Ave. Richmond, VA. 23234

U.S. Navy NSWCDD Dahlgren, VA
Explosive Crane Operator
Explosive Material Handling Operator
Explosive Driver
Man lifts
Bucket Trucks

Halliburton KBR, Iraq
60-ton R/T
50-ton Truck Crane
15-ton Carry Deck
6-K thru 30-K forklift

Fluor Construction
200-Ton Bridge Crane
180-Ton Polar Crane
55-Ton Terex R/T Crane
55-Ton Grove R/T Crane
15-Ton P&H R/T Crane
8-Ton Boom Truck
8000/30000 Forklift
Tractor/Trailer

Drivers License:
Virginia CDL

Medic First Aid:
CPR with AED, Card Expires 12/15/07

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 1032)

Go to Search Parameters...

Brief Description

Project Controls/Sr.Planning/Project Engineer

12+ years of experience/education in Logistics/Transportation Management

I am currently working with the National Environment Agency as an operation engineer in an incineration plant. Had obtain Degree in Electrical Engineering, and is a Australian PR

Diplom engeneering geology with one year of experiance in break water

COMPUTER LITERATE, LOGISTICS SHIPPING,AIR IMPORT EXPORT

Biomedical Engineer

EPC/EPL Manager, Rehab & startup projects. Polished broad based o/seas tech & mgmt skills

Professional with Ten years of total work experience out of which Seven years in cost estimating, cost control, and project management. Proven record of success analyzing all aspects of a project or area of responsibility, project scheduling investigating and improving efficiencies of operations.

Strong character and leadership traits – Outstanding work ethic – Quick learner – Self motivated- Dedication to quality job performance- Highly professional attitude- 15 years of experience in a manufacturing production environment.

10-years of experience, highly dependable, punctual and efficient, strong background in customer services and support, excellent organizational, planning, interpersonal and communication skills as well as filing, receptionist and other related tasks

To obtain a position in computer science/computer information systems field, telecommunications field and as well as in any other business field where I will be able to develop my skills.

Safety Health & Environmental advisor, HSE advisor, consultant, russian turkish speaker

I am a Bilingual/Bi-Cultural person. I have a lot of iternational business experience as a global businessman. I can be a good bridge between U.S. and Japan.

Procurement specialist in the Oil & gas Industry with 9 years experience of procurement/buying/contracts/expediting.

With over 14 years experience in Camp and Catering Management and a long practice of difficult countries ( Nigeria, Angola, Myanmar(ex Burma), Iran, Algeria, Kosovo, and Afghanistan), I believe I could make a significant contribution in helping The Company achieve its goals and objectives..

Geologist

Construction supervisor (industrial civil works , Algerian HND) (48 GAS wellheads linked to 2 GAS Production trains to 4 GAS marine offloading systems

Over 25 Years of Crane/Equipment /Rigging + CDL Experience

20 years in the Navy I worked as a Supervisor/Quality Assurence/Electronics

Power plant engineer involved in a variety of power plant equipment design and commissioning.

QA/QC IN POWER, PIPE FITTER, STRUCTURAL FITTER, AND HEAVEY AND LIGHT EQUIPMENT OPERATOR

My experienced includes hydrocarbon analysis, pore pressure detection, lithology identification, and subsurface evaluation. Drilling experience on directional, sidetrack, vertical, and geosteering wells, with various drilling fluids, throughout the US and Gulf of Mexico.

Six Sigma,Lean manufacturing practices,Capacity planning,Line balancing,Human Factors

Maintenance Manager/Supervisor - Direct hands-on experience in the start-up of a large hydroforming/manufacturing facility. Excel at directing a cohesive staff in the successful attainment of objectives. Major strengths in planning, problem solving and communication.

Project Planning and Management, and Procurement / Purchasing

Human Resources, Project Management, Training, Engineering

I have a varied skill sets and expertise which puts me in a unique position to contribute enormously to a wide range of duties and activities- Ranging from Mechanical Engineering (projects and operations), to Project Management and Process Improvement

MSc in Management Finance,BS(Hons) in Business Administration, ACCA, CAT

Early career Supply Chain Management & Project Management Graduate

I am a civil engineer designer with a multi - disciplinary consultancy. I am involved in all aspects of delivering flood alleviation schemes including design of flood defences. I have a BEng(hons) from an accredited university and am finishing my MSc part - time. I also have 2 years of site exp.

My experience in biological science ranges from working independently to working for, State, Federal Agencies and Environmental Companies. This experience has provided me with valuable skills in conducting field research, data collection and analysis on many threatened and endangered species.

Graduate chemical engineer (The University of Queensland), hardworking, quick learner and eager to learn with excellent communication and project & time management skills.

Accounts Professional having 5.8 years of an experience.

Am a hard working and reliable person who displays a high standard of care and customer service, a person who is highly active, self motivated, keen to succeed and eager to learn new skills. Am good team worker and I know how to prioritise my work.

Administration, Marketing, Business Development, Operations & Computers

HAZOP, Risk Assessment, EHS Training, Waste Management, EMS, OSHAS 18001

Timed served Mechanic with safety certification and good leadership skills

Industrial Projects Management / Engineering Design,Purchase / Supply Chain Management.,Installation, Erection and Commissioning of Machinery,Business Development,Material Management.

Oil & Gas Land Title, Leasing, Right of Way, Consulting & Reporting

Very good analytical and project management skill. Do multi tasking and road warrior.

Production Manager with BS in Mechanical Engineering and 8 years of experience in CNC Machine Shops, QC, QHSE, Planning, Inventory Control, Cost Control, Budgeting, ERP (Great Plains), Pro / E, AutoCAD. Good experience in factories start ups. CPIM (Certified in Production and Inventory Management).

Licensing, installing and configuring Windows Server 2003. Licensing, installing and configuring Active Directory. • Managing physical and logical disc. Configuring terminal services. Managing, monitoring and securing Windows Server 2003 resources. Managing user, group and computer accounts i

A highly skilled and very experienced Supply Chain Professional with over 20 year's expertise in Logistics, Procurement and Materials Control mainly overseas.

I have completed CA - Inter and currently a Chartered Accountant - Finalist from Institute of Chartered Accountants of Pakistan. I am working with Ernst & Young Global Limited in Karachi office for the last 4 years and currently my designation is Senior Auditor.

Over 08 years experience in IT/IS with around 04 years of expereince in JD Edwards implementaion in technical and funtional role, proficient in coordinating overall project execution to ensure inter-project dependencies are properly identified and managed, familiarity with Project Management methodo

Engineer (Design & Vendor Development), (CAD/CAM) Engineer, 1)Planning and maintaining Our Section and the Customer regarding the Development 2) Visit Companies for our tools Development & make Reports on Current Status3)Responsible for the job planning and implementing with the schedules

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

Planning, Scheduling, Primavera, Risk management, Pertmaster

Mechanical Engineer with wide experience in Manufacturing, Maintenance, Sales and Service, Application Engineering, Project Engineering and Administration. Total experience of 30 years. Can work in any field like Construction, Hospitality Industry and Process Industry.

Human Resources Generalist

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out