Resume - 4 years experinece in electronincs and electrical related works and in embedded...

Misco Jobs

Resume #85473

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
To attain a responsible and a challenging position where I can exploit my knowledge and technical skills, that encourage continuous learning and creativity, providing exposure to new ideas, which stimulates professional and personal growth.

EXPERIENCE DETAILS:

ƒå Professional experience of 4 years in Embedded Systems Design & Development and Testing.
* 2 years of Experience in Embedded System design and Development.
* One year Experience in Verification and Validation in the Medical Devices.
* One plus years of Experience in Software testing in avionics domain.

AREAS OF EXPERTISE:

* Design and development of Embedded Systems.
* Good experience in Firmware Development.
* Good Working experience in 8-bit and 16-bit microcontroller architecture.
* Good working knowledge in serial communication protocols like I2C, SPI, UART, RS232, and RS485.
* Good Experience in C / Assembly Language programming.
* Very good knowledge in the analytical of Electrical Hardware Circuit.
* Electrical DFMEA (Design Failure Mode Effective Analysis).
* Experience Verification and Validation of the Medical devices.
* Good knowledge in writing test strategy and developing protocol.
* Well understanding of the medical standards like ISO: 13485 and FDA guidelines.
* Good knowledge of the Compliance Testing.
* Working experience in EMC/EMI.
* Development of test cases Using RTRT for avionics software.
* Good knowledge in the DO-178B
* Development of Low Level Requirement.
* Experience in the DOORS, Dimensions and PVCS.

DOMAIN EXPERIENCE:

ƒå Medical Devices.
ƒå Aviation.
ƒå Industrial Automation.

WORKING EXPERIENCE:

Organization Designation Duration
HCL Technologies Chennai Project Engineer 23 Apr 2007 -till date
Integrated Process Automation (IPA) Pvt. Ltd. Bangalore. R&D Engineer July 2006 ¡V March2007
Adpro Automation Pvt. Ltd. Bangalore. R&D Engineer Aug 2005- June 2006

EDUCATIONAL QUALIFICATION:

M. Sc. Applied Electronics (Bharathiar University).
B Sc. Electronics (Calicut University).

PERSONAL DETAILS:

NAME: SAJITH B
DOB: 27-April-1977
Contact Details.: psajithb27@gmail.com,
Mobile: +91-9884446398.

PROJECTS:

Medical Projects:

Description of the Project1: [Cryo Balloon Ablation System]. The CBAS-console consists of five major sections Industrial PC, RTSE circuit, Pre-Cool circuit, Vacuum Pump section, Power Distribution section. The Industrial PC provides the GUI during the console operation. The RTSE circuit receives the command from industrial PC and performs controlling and sequencing of all actions that are involved in controlling the flow of N2O to the balloon catheter. The pressure and temperature signals from various points of the N2O flow path are received and processed by the RTSE circuit.
The Pre-cool circuit is used to maintain the cryogenic temperature (-30 deg C) before entering in to the catheter. The vacuum pump is used to maintain a predefined value of vacuum during various states of the Console operation. The console receives the inner/outer balloon pressure and inner balloon temperature through the catheter board electronics. The communication between Console and the catheter board electronics happens through serial interface. The console is powered with universal AC input and all the electronics in the console is powered by medical grade power supply.

Description of the Project2: [Selective Neural Stimulation]. The SNS technology is a neuro-stimulation battery operated device, which transmits a controlled waveform designed to stimulate specific nerves. This SNS waveform is composed of a carrier signal and a pulse envelope. The carrier waveform is designed to be of sufficient frequency to overcome tissue impedances. The pulse envelope contains specific pulse width, amplitude and shape information designed to stimulate specific nerves. SNS can be used to treat a medical disease condition called overactive bladder.
The stimulation device in its final patch form is placed on the skin for a period of up to seven days. The user can adjust the patch waveform parameters through an optical link via a handheld controller. In addition, the controller can be connected to a PC via a hard wired serial link. The hard wired serial link can be used to upload data stored on the controller and allows a wider range of parameter adjustment for patch unit.

Responsibilities:
1. Requirements Study and analysis
2. Verification Plan development
3. Development Test Strategy and Protocols
4. Dry Run execution.
5. Testing.
6. Development Board Test protocol Project2 (SNS)..
7. Development of DFMEA for Project2 (SNS).

Aviation Projects:

Description of the Project 1: It is a requirement based testing. SCOE (Software Common Operating Environment) is an ARINC-653 compliant system to manage all the operations in airborne equipments. SCOE Software is a Level A software that needs to adhere to all the stringent objectives defined in DO178B standards. As per DO-178B Structural coverage is mandatory for Level A software. The objective of this analysis is to show 100% coverage in terms of statement coverage, decision coverage and MCDC. If there is any lack of coverage then justification is provided. In addition to that unit testing is also done. Structural coverage is performed to ensure that there are no dead code and unreachable code. Unit testing is performed to ensure that the written software adheres to the low level requirement.

Responsibilities:

1. Requirement Study and analysis
2. Test case development as per DO-178B
3. Automation of test cases
4. Run the test cases by using RTRT Tool, Simics simulator and On Target

Description of the Project2: Smiths_Scoe-LLR_Gen project for development of Low Level Requirements for the features File System, AFDX and HMEvent Interface modules in the SCOE (Software Common Operating System Environment).

Responsibilities:

1. Requirement Study and analysis.
2. Generation of low level requirements for SCOE.

Industrial Automation Projects:

Description of the Project 1 (Belt scale): Belt conveyors are accepted means of moving bulk materials in mining and process industries. With the advent of this fast mode of transportation, accounting the quantity of material transferred assumes great importance. Belt scales are the most reliable index of material accounting and can be measured directly and precisely, which offer accurate weighing systems to maintain higher accuracy and better accountability in the process. the systems employs a weighing frame with two or four load cells to sense the material load on the belt, a tacho generator to measure the belt speed.

Description of the Project 2 (Ethylene Oxide & Carbon dioxide filling Machine): This project is developed for Pest Control (India) Pvt Ltd, Mumbai, for filling liquefied EO & CO2 in different size of cylinders. It consists of one platform mounted over load cells controlled and monitored by the processor and display unit. Operator can enter the set value and other accuracy limiting parameters through keyboard. Once the operation started the set quantities of EO & CO2 will be filled in the cylinder. System is interfaced with a printer which is placed in a remote location through RS485, so that after each operation, required parameters will be printed out automatically along with current time and date.

Description of the Project 3 (Hopper Weighing System): Description of the Project: The hopper weighing system developed with four set points. The system would always monitor the weight on the hopper, if each set point is achieved corresponding output is activated there by the material flow was controlled The system was designed to be used ADC 7730 which is SPI compatible. The system includes max7219 display driver IC, additional memory, D/A Converter AD420 and the system has an expansion

Platform Used 8051 family IC's
Language Used C (Keil Cross compiler)

Responsibilities:
1. Requirement Study and analysis
2. Designing and Development Hardware section.
3. Software development for the Firmware and Display.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 751 to 800 of 1031)

Go to Search Parameters...

Brief Description

Specialized in International Human Resources, I am currently in Dubai responsible for personnel management in a multicultural environment. In France, I also actively participated in Rio Tinto Alcan to the setting up of a European HRIS.

I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.

Hard working and Dependable Environmental Professional

I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.

Experienced Automation/Process Control Engineer

Master Mariner and have experience as Senior Officer on LPG Carriers

FRAMME (Intergraph), Microstation (Bentley Systems), Projectwise, C++, Microsoft Office, HTML, Matlab, AUTOCAD,

10+ Years Experience PLC Programming PC Board Testing/Repair Test Point Systems

* MBA in Asset Management and Graduation in IT. * Proven ability to manage complex projects. * Building motivated teams to accomplish capital projects.

Proficient in Microsoft Office Programs; Familiar with OSHA and NFPA federal standzards; Technical Skills; Research Skills

My experience have given me a broad adaptation of works in various areas. I can and will succeed in almost every area of work as I am a practical and fast learner. I have sufficient knowledge in computer basics and literacy. I am a fast typist and can create text documents

Organizational Development •Procurement & Purchasing Systems & Hardware • Operations Management •Business Development • System Analysis • MIS Administration • Inventory System Control • Team Management • Regional ICT Management • Regional MIS Management • Regional Database Management

ms word,internet marketing,power point,quality control assuransce,NIM nigerian institute of management , NISLT nigerian institute of science and lab technicaince , PGD post graduate diploma in industrial chemistry , HND in polymer technology

Initially degree qualified as an Electrical/Electronic Engineer, I have been working in the field of DCS Control systems for the past 25 years. I have worked as a Field Service Engineer, Application Engineer, Systems Engineer, Commissioning Engineer. Primarily with Foxboro systems.

Free! In excess of 15 years Health and Safety experience. Strong coaching. Leadership skills and experience in BBS. Experience includes large 3D programs in all types of terrain including mountains, Arctic, and cold weather conditions.

Seeking a position in Quality Control/Assurance Management where my extensive background, abilities and expertise will be used efficiently.

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Environmental Consultant (Engineer/Scientist)/Geoscientist

Dear Sir, I am a highly motivated person who works hard to accomplish my vision for the Future. The success of your company fits perfectly within my vision, and I firmly Believe I possess the tools to help your company thrive. In my most recent experience, I took on a leadership position a

I am a professionally qualified Process Engineer with experience of process and product development, as well as quality control at Energy and Telecommunication Industries. I am accomplished to multinational environment, related to process modeling, project leadership, quality control and auditing.

Chemical Engineering, Control System engineer. Pipeline operation. Catalyst

pdms 3d cad autocad cadworx sr designer mechanical drafter field engineer walkdown

Results-driven Industrial Maintenance Planner/Scheduler offering 15+ years of extensive hands-on industrial maintenance experience, committed to efficiently manage and plan machine maintenance.

Livelink Administrator, Causeway Collboration Administrator

I completed my Bachelor of Science in Agricultural Economics and Agribusiness in the year 2001 and have completed the MBA programme majored in International Business in August 2008.

Catia, Solid Works, Solid Edge, Pro/ENGINEER, Adobe, Microsoft Office ( PowerPoint, Access, Project ), Photoshop, Blue Prints, Design, Product Development, Plant Layout Strategy, Six Sigma, Lean Manufacturing, 5S, , Injection Mold Press, Class A/CDL license, Lathe, Forklift, Donkey-lift, Milling

I have project management experience in all phases of pump installations, well development, geothermal installs. I can run almost any type of equipment. I have worked at geothermal powerplants and mines all over the western states. I all keep my crews safe and productive. Can work well with others.

Mining Engineer with Business Administration experience in one of the world's largest cement company

With 20yrs of my experience, I have developed a sound background in infrastructure civil project and management, methods and procedures, which includes Commercial & Residential buildings, Roads, bridges, Tunneling, Dams, Environmental Remediation and Extensive Construction Quality Assurance/Quality

A young, dynamic, astute, confident, result-oriented and self motivated person with the ability to handle pressure of a working environment and also work well within a team. Smart in appearance, proven starter with strong analytical skill and an enthusiastic fast learner.

4 years experinece in electronincs and electrical related works and in embeddeded sytems

HUMAN RESOURCE PLANNING, ADMINISTRATION, RECRUITMENT & SELECTION, ORIENTATION, TRAINING & DEVELOPMENT, PERFORMANCE MANAGEMENT & EMPLOYEE RELATION MANAGEMENT

Master Mariner, Class 1: Graduate doing MBA: Employed as Planning Manager with a Container Company

As site Geophysicist/ project coordinator in UNICEF (United Nation Children and Education Funds), Geologist for GABIMO ENGINEERING CO LTD and National Water Resources Institute my principal responsibilities were to ensure that all projects were carried out in consonance with requirements and standar

HR Professional seeking Middle / Senior Management Position

All activities relating to Electrical Construction projects such as installation & commissioning of Electrical equipments namely generator, Transformer, HT. LT panel, Laying of power, Lighting cables & Lighting Fitting

COMPUTER SKILLS, AND CAPACITY TO DO WORK WITH EVERY KIND OF PERSON

Education: MSc - Newcastle University BSc - University of East Anglia 3 ‘A’ Levels + 8 ‘O’ Levels - Computer software including Primavera (P5), Microsoft Office -

I am a Civil Engineering Graduate from NED University, Karachi, Pakistan and hold a Master's degree in Environmental Engineering from USA. I have extensive professional consulting experience spanning over 10 years of EHS management and controls, involving Due Diligence reviews and audits, Environme

Planning/Schedule Engineer,Maximo IMplementor,

CMIOSH - Sr. Industrial Hygienist : Expertise in writing & implementing OH Procedures, conducting HSE Training, Inspection, Audits, Risk & Industrial hygiene Exposure Assessment & Monitoring etc. Able to work with little guidance, hold good inter-personal relations & transparent communication skill.

Electrical systems testing, quality control, repairs, troubleshooting, electronics, component design, and/or training and development

With a demonstrated commitment to establishing and maintaining safe work practices, I am seeking to positively contribute to a progressive organisation, and wish to be considered for employment as the Emergency Manager. I have over 14 years experience within the emergency services sector, consider

Corporate Finance, Program Management, Management Consulting, Audit, Accounting, Business advisory services

I am a multiskilled candidate with more than two years experience. I have acquired Engineering as well as Business Education. I am fully convesant with Corrosion Prevention system for Underground pipings, API 650 standards for tank design and HSE standards.

Logistician in all logistical related fields. All logistical work has been conducted overseas.

Projects Management / Technology Consultant / Business Development & Management of Information Systems

Have international experience in project planning/scheduling, cost estimating/control, and project procurement.Hold advanced education and research background in project management and international construction management, and proficient knowledge and skills in applying P3, PRISM, and CONVERO.

Graduate with 5+ yrs of experience

Project Controls/Sr.Planning/Project Engineer

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 [ 16 ] 17 18 19 20 21

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out