Resume - Power plant engineer involved in a variety of power plant equipment design and c...

Misco Jobs

Resume #8921

CONTACT INFORMATION:
View contact information...

Objective:
Challenging position in a growth-oriented organization, which offers diverse job responsibility in mechanical engineering using my skills as a responsible, efficient motivator of successful engineering teams.

Education:
University of Central Florida, Orlando, FL
1998 - 2000
MS in Mechanical Engineering. Concentration in Mechanical Systems. Dean's List

Northeastern University, Boston, MA
1994 - 1997
BS in Mechanical Engineering. Minor in Mathematics. Dean's List

Work Experience:

Mechanical Engineer

Siemens Westinghouse Power Corporation, Orlando, FL - Power Generation Industry.
2000 – 2004
Thermal Equipment Engineering Group

As a cognizant engineer of the Thermal Equipment Engineering group, the area of work is on Heat Recovery Steam Generators (HRSG), Steam Surface Condensers, Cooling Towers and Rotor Air Cooler Kettle Boilers. Position involves writing technical design specifications for the above equipments based upon the customer specification (Contract) and a variety of codes such as the American Society of Mechanical Engineers (ASME) section I (Boiler Code) and section VIII division 1 (Pressure Vessels), Heat Exchange Institute (HEI) standards, Tabular Exchange Manufacturing Association (TEMA) etc.
In addition, responsible for jobs procurement such as the review of vendor drawings, erection procedures, shop fabrication procedure, review and development of P&IDs and associated instruments list. Also participate in vendors bid evaluations, review or proposals technically and commercially in order to select a fit vendor, responsible of project management and review of all vendors deliverables. Responsible for interface with the vendor, A/E and trouble shooting related issues that might arise at site during project commissioning."

As a group Technical Lead for the Steam Surface Condenser and the Rotor Air Cooler Kettle Boiler Heat Exchangers, I had the responsibility to come up with a standard design for both of these equipments in order to reduce the engineering hours and the cost involved. In addition, I was also involved in standardizing the Selective Catalyst Reduction (SCR) System used in the Heat Recovery Steam Generator to minimize the exhaust Nox from the gas turbine. I have also been involved in doing some Finite Element Analysis calculations with one of our HRSG vendor to come up with the best Tube to Header Connection and have been published to the ASME committee for their review. Position also involved heavy customer contact centered on bid proposals, vendor specifications and client support. In addition, support to marketing/sales groups in order to secure more orders and applications group during bid proposals stage.
Aside of my office responsibilities, I have been also involved in many of "Site Readiness Reviews", it is a process in which the responsible engineer goes out to the site and check on the completeness of the equipment and checks for any show stoppers for the operation of the plant. My responsibility involved a complete check of the HRSG, rotor air cooler and the condenser.
One of the main challenges was to come up with a first time engineering Air/Fuel heat exchanger design to be used in conjunction with a Fin/Fan cooler used to heat up the fuel gas for better performance and to set up the control philosophy description for both of these systems and perform site commissioning of the system. The system was used in two different projects in Mexico and were successfully commissioned.

2004-Present
Balance of Plant Group

As a cognizant engineer of the Balance of Plant group, my scope of work included working on Fuel Gas Heaters, Fuel Gas Compressors, Fuel Gas Skid system and system design of main steam, feedwater, condensate and fuel systems. Responsibilities include process engineering/ mechanical engineering, engineering planning and scheduling and technical ordering document generation. My principle output include system design specifications (Design Basis & Functional Requirements), Engineering Flow Schematics and equipment specifications with calculations to support the design. From these documents, Supply Management can procure equipment and systems, and AE can complete the detailed design of the plant with appropriate overview / approval by BOP. My support of the Erection / Commissioning activities at site include walkdowns / inspections, resolution of site issues (questions, changes, performance problems)".

Mechanical Engineer

Yang Enterprises, Inc., Winter Springs, FL - Construction industry. Primary customers: Exxon Corporation, Mobil Corporation and Kennedy Space Center.
1998-2000
Has been given assignments to perform on-site inspections, and post analysis of the site. Work on mechanical as well as civil aspects of a design. Prepared contract documents, site investigation reports and bid proposals. Provided cost estimates for a government contract. Designed Gasoline Service Stations including site layout, grading plans, utilities plans, landscape plans, petroleum equipment schedules and convenience mart details. Concentrated on working with AutoCAD 14 and Micro
Station to generate plans.
My job responsibilities included to set up AutoCad training classes for all the employees.

Contractor

CDI Corporation - Westinghouse Power Corporation, Orlando, FL
1998
A six-month contract assignment within Strategic and Product Development group. (John Schwab, Manager) Contract consisted of working on 501G 2x1 Combined Cycle - Ironwood Power Project-AES.
Assignment involved modifications of proposed drawings made on AutoCad 14 version, heat balance cases, and process flow diagrams.

Mechanical Engineer

SGM Engineering, Inc., Altamonte Springs, FL - Commercial HVAC and Plumbing industry.
1997-1998
Worked as a mechanical engineer, while performing some drafting and analysis on final product delivered to clients. Acquired experience both in mechanical and electrical aspects of a design process. Have been delegated major assignments with significant client base.

Training Experience

* Acquired a certificate from the American Society of Mechanical Engineers upon attending "Section VIII, Division 2 Pressure Vessels" training class.
* Acquired training certificates from Siemens Westinghouse in a variety of Power Generation Industry equipments such as combustion turbine, steam turbine, combustion turbine performance and design and project management.
* Acquired a certificate from the American Management Association "AMA" from participating in Project Management with Suretrak Course.

Publications
* I have published a paper at the ASME International Gas turbine Institute titled "Comparison to various Tube to Header Attachment Detail Under Cyclic Service".

Awards
* I was awarded two performance awards in recognition of the outstanding contribution to the success of Siemens Westinghouse.
* Received a spot award as a result of dedicated support to other groups to meet project deadline

Computer Experience:
Microsoft Office 97,98, 2000, Master Series (Ideas), MatLab, AutoCad, Mathcad, Micro Station, Ansys, Pro-E and Gate Cycle.

References:
Professional references are available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 964)

Go to Search Parameters...

Brief Description

HSE Mechanical Engineer. Quality, Safety and Environmental issues skills.

Document Control

EPC/EPL Manager, Rehab & startup projects. Polished broad based o/seas tech & mgmt skills

Professional with Ten years of total work experience out of which Seven years in cost estimating, cost control, and project management. Proven record of success analyzing all aspects of a project or area of responsibility, project scheduling investigating and improving efficiencies of operations.

Diverse background in construction, logistics, remote location activity that can be used to meet your company's immediate and long-term needs. 15 years of increasing responsibilities in the construction industry. Multiple job responsibilities including blueprint reading and project layout.

SALES PROFESSIONAL with an impressive record of top performance and the proven ability to achieve solid sales growth….to effectively capitalize on both new and existing market opportunities

HSE Advisor with 10 years international QHSE work experience (Oil Industry)

To obtain a position in computer science/computer information systems field, telecommunications field and as well as in any other business field where I will be able to develop my skills.

With over 14 years experience in Camp and Catering Management and a long practice of difficult countries ( Nigeria, Angola, Myanmar(ex Burma), Iran, Algeria, Kosovo, and Afghanistan), I believe I could make a significant contribution in helping The Company achieve its goals and objectives..

i am holder of MBA degree, i was working in lebanon as consultant of UNDP then left to Shanghai and work as vice president of a manufacturing company and now i am currently in Saudi Arabia as project cost conrol of petrochemical construction company

Experience of greenfield project, Production of iron ore and diamonds. Mine planning. Implementation of ISO-14001. Safety management. Management as well as Supervision of all mining activities viz. drilling, excavation, haulage, dozing, grading etc. Quality control and management

I completed a B. Tech degree in Environmental Health at Peninsula Technikon. I also completed short courses in Environmental Management, HACCP, and Audiometry. I did my experimental training at the Worcester Municipality, Worcester Abattoir, and Maitland Abattoir.

Geotechnical Engineer specializing in rock/soil engineering and numerical modelling, based in Vancouver, Canada. Looking for a challenging career opportunity worldwide in natural resources sector, civil/mining geotech consulting or academia.

Career in logistics management during the past ten years. Operational background from the ground up with cargo airline, third party logistics provider, freight forwarding, marine and air cargo charter, and oil & gas industry experience in remote locations, namely Alaska and Russia / FSU.

Over 25 Years of Crane/Equipment /Rigging + CDL Experience

Power plant engineer involved in a variety of power plant equipment design and commissioning.

Thirty years as city of Winnipeg Fire Paramedic Service working through the ranks to a position of Captain . Knowledge of field and operation within emergency field.Experience in organizing and directing personnel. Extensive training in safety sector as National Construction Safety Officer and Consc

Maintenance Manager/Supervisor - Direct hands-on experience in the start-up of a large hydroforming/manufacturing facility. Excel at directing a cohesive staff in the successful attainment of objectives. Major strengths in planning, problem solving and communication.

hnician/manager with over 15 yrs experience in train scheduling and safety. Expertise in train circulation graphing, train scheduling, and statistical analysis of safety and performance. Strong mathematical, analytical and problem-solving skills; demonstrated leadership; sharp eye for detail.

I am Mechanical Engineer with 7 years experiences in Engineering and Management

Experienced construction project manager with heavy background in petrochemical production operations

I am a civil engineer designer with a multi - disciplinary consultancy. I am involved in all aspects of delivering flood alleviation schemes including design of flood defences. I have a BEng(hons) from an accredited university and am finishing my MSc part - time. I also have 2 years of site exp.

My experience in biological science ranges from working independently to working for, State, Federal Agencies and Environmental Companies. This experience has provided me with valuable skills in conducting field research, data collection and analysis on many threatened and endangered species.

Accounts Professional having 5.8 years of an experience.

HAZOP, Risk Assessment, EHS Training, Waste Management, EMS, OSHAS 18001

Industrial Projects Management / Engineering Design,Purchase / Supply Chain Management.,Installation, Erection and Commissioning of Machinery,Business Development,Material Management.

• Effective working alone and as a cooperative team leader/member. • Experienced in cash handling procedures and accounting. • Approximately 3 years of management experience in a food service setting. • Skilled in the planning and developing of catering activities.

Professional bilingual Engineer with, mining, constuction, and maintenance experience

Recent graduate seeking challenging environmental science position

Production Manager with BS in Mechanical Engineering and 8 years of experience in CNC Machine Shops, QC, QHSE, Planning, Inventory Control, Cost Control, Budgeting, ERP (Great Plains), Pro / E, AutoCAD. Good experience in factories start ups. CPIM (Certified in Production and Inventory Management).

A highly skilled and very experienced Supply Chain Professional with over 20 year's expertise in Logistics, Procurement and Materials Control mainly overseas.

Seeking Chemist or Laboratory Technician Position-will relocate

Engineer (Design & Vendor Development), (CAD/CAM) Engineer, 1)Planning and maintaining Our Section and the Customer regarding the Development 2) Visit Companies for our tools Development & make Reports on Current Status3)Responsible for the job planning and implementing with the schedules

Civil Engineer

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

Planning, Scheduling, Primavera, Risk management, Pertmaster

Working as HSE Manager with an experience of 3years in Mideast on construction field,OSHA,NEBOSH,DIFSE,BE(C.C)

Working on a Bachelor's Degree in COnstruction Management. Most of my experience is in GIS, Auto CAD, and Architectural Desktop

Mechanical Engineer with wide experience in Manufacturing, Maintenance, Sales and Service, Application Engineering, Project Engineering and Administration. Total experience of 30 years. Can work in any field like Construction, Hospitality Industry and Process Industry.

Human Resources Generalist

Management , strategic management , marketing +EXPERIENCED PAINTER !!!

MA. research skills. people skills.

IT & Technical Facility Project Manager, Systems / Application Design, Development, Deployment, and Integration Manager - Data Centers, Contact/Call Centers, Hospitals, Renewable Energy Sources and Systems, "Green" Engineering/Construction, Clean Energy Technology, Energy Managment Systems / BAS

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

GIS Analyst

Management Administration U S Veteran

B.E CHEMICAL with 2 yrs experience in Project

Seeking career prospects in metallurgical processing, mineral resources (ferrous metals, base metals, precious and rare metals), process improvement and optimization, research and development, project management, process-business analysis, technology policy and resources assessments

Analytical skills to perform analysis of project costs and approaching problems, uses well thought out solutions. Prioritization of time management to ensure that project reports are timely compiled. Workload is managed effectively within deadlines. High level Excel user. Specializing in InControl

Sdw

1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20

Seach Parameters


Change search parameters...
CATEGORIES: Management; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out