Resume - OBJECTIVE Seeking a position with a consulting company as a consultant to uti...

Misco Jobs

Resume #1077

CONTACT INFORMATION:
View contact information...

OBJECTIVE
Seeking a position with a consulting company as a consultant to utilize a wide background of environmental projects, experiences, and a strong background in computers.

TARGET JOB
Desired job type:        Employee
Desired status:            Full-time
Desired salary:            $40,000
Site location:            No preference
Description of perfect job:    A consulting role in a company that would entail a mixture of field, laboratory, and office work that would have the possibility of travel.
Career level:            Post-graduate school entry level
Date of availability:        May 13, 2002

TARGET COMPANY
Category:                Environmental consultant
Description of perfect company:    A company that would reflect the qualities described by the perfect job.

TARGET LOCATION
Relocate:                Yes
Preferred location:    Colorado, Alaska, Idaho, Montana, Washington, and Oregon
Willing to relocate elsewhere:    Yes

ACADEMIC TRAINING
Colorado School of Mines, Masters of Science, May 2002
Major: Environmental Science and Engineering
Thesis: Characterization of Polydisperse Colloids by Field-Flow Fractionation (FFF): Determination of Size and Composition of Soil Colloids
Advisors: Drs. James Ranville and Bruce Honeyman
GPA: 3.32 / 4.0

University of Idaho, Bachelor of Science, December 1997
Major: Environmental Science, physical science option- water; economics and management
Minor: Forestry, wildlife and range science
GPA: 3.22 / 4.0

ENVIRONMENTAL EXPERIENCE

Colorado School of Mines – Thesis Research, Aug 1999 to Jan 2002
Conducted size and chemical analysis of natural soil colloids from Rocky Flats to determine size exclusionary effects in the transport of colloidal particles through a porous media.
Compared field-flow fractionation (FFF) with other size analysis techniques (i.e. SEM, PCS, SPOS) to demonstrate difficulties of accurately sizing non-spherical particles of sub-micron size.
Coupled FFF to chemical analysis techniques (i.e. ICP-MS, GFAAS) to determine size dependent chemical distributions of the soil colloids and detect surface coatings.
Demonstrated size exclusionary effects in the transport of polystyrene beads and natural soil colloids through soil columns.

Air Quality Research – Los Alamos National Lab (ESH-17), Jan to Aug 1999
The Air Quality Division monitors the levels of suspended radionuclide contaminants in the air through a system of auto-samplers around the laboratory property.
Designed an automated program in Access and Excel using Visual Basic and SQL to automate radionuclide concentration analysis of the auto-sampler database into queried time intervals, contaminants, and auto-sampler stations. The program would then graph the data in Excel.
Calculated investigation levels for laboratory release of radionuclides.

Environmental Hydrology Research – Los Alamos National Lab (EES-15), May to Dec 1998
The project was designed to determine the effects of disruption (i.e. fire, timber harvest, construction, etc.) upon a plot of land in relation to the surface runoff, vegetative masses, and the time recovery to restore to previous conditions.
Used Access and Excel to import data into a database to allow for easy viewing of desired data. Inspect data for accuracy and completeness of entire data set.
Fieldwork included vegetation and ground moisture analysis, flume calibrations, and post-event runoff and erosion data collection. Included the programming of data loggers to test ground moisture measurement probes.

Undergraduate Research Semester – Los Alamos National Lab (EES-15), Jan to May 1998
The URS program allowed undergraduate and recently graduated students to conduct research overseen by a mentor at the Los Alamos National Laboratory.
Created a database of surface runoff data and erosion data from 1991 to 1998 on plots that were undisturbed and ones that were disturbed. Compared vegetation, runoff, and rain events with a previously published paper analyzing the first three years of the study. Found that there were still ill effects from the disruption in 1991.

Beneficial Use Reconnaissance Project – Nez Perce Tribe – Water Res. Div., June to Aug 1997
The Nez Perce tribe contributed to a statewide project using crews of three people to survey stream conditions on the reservation.
Tested streams for their potential beneficial uses, which included, but not limited to, measuring discharge, collection of macroinvertibrates, random sample pebble counts, electro-fishing, and classifying streams according to the Rosgen classification system.
Advanced leadership experience through crew chief position.

Environmental Health Study – TerraGraphics Environmental Engineering, Inc., June 1996 to Jan 1997
TerraGraphics worked with the Panhandle Health District in Kellogg, ID to conduct an environmental health study outside the Bunker Hill Superfund site in order to determine if lead contamination outside the site was adversely affecting the population.
The project was broken into eight crews of three people sampling the houses of volunteers. Interviews were conducted, soil and drinking water samples collected, and the house paint tested for concentrations of lead.
Certified to run an XRF machine, which determines lead concentrations in dried paint.
Collected particulate samples from houses.
Gained leadership experience through crew chief position.

Creek Restoration – Palouse Clearwater Environmental Institute (PCEI), fall 1995, 1996
PCEI is a company dedicated to projects to improve environmental quality in Moscow, ID.
Volunteered to help restore meanders to a section of the Clear Creek. Most of the work centered on bank stabilization with rocks, tree stumps, and plants.
Volunteered on a wetland project where wastewater from a treatment plant is diverted through the wetlands before being discharged into the creek. Helped to plant wetlands biota.

PROFESSIONAL COMMUNICATION
Successfully defended a Masters research thesis on the size and chemical analysis of natural soil colloids.
Taught the laboratory for the aquatic chemistry course for the fall 2001.
Attended the Soil Science Society of America (SSSA) national conference (2000) in Minneapolis, MN and the Ninth International Symposium on Field Flow Fractionation (2001) in Golden, CO to present posters of the thesis research.
Gave a technical talk of research conducted while in the Undergraduate Research Semester (URS) program at the Los Alamos National Laboratory.
Gave a poster presentation to laboratory workers detailing the research results of the URS program.

RELEVANT CLASSES
Aquatic Chemistry
Calculus and Differential Equations
Chemistry of Soil / Water Interface
Ecology
Environmental Chemistry and Geochemistry
Environmental Impact Statement Assessment
Environmental Law (including NEPA)
GIS and Remote Sensing of the Environment
Hydrogeology and Hydrology
Wastewater Engineering

COMPUTER SKILLS
    Advanced MS Office 2000
    Access (Visual Basic and SQL)
    Hardware Installation and Troubleshooting
    HTML
    Software Installation and Troubleshooting
    Windows 95/ NT/ 2000

CONFERENCES
Attended Ninth International Symposium on Field-Flow Fractionation; Golden, CO; summer 2001.
Attended Soil Science Society of America Conference; Minneapolis, MN; fall 2000.
Attended National Pollution Prevention Conference; Denver, CO; spring 1997.

REFERENCES
References will be provided upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 351 to 400 of 1623)

Go to Search Parameters...

Brief Description

3D Modeling, FEA, ANSYS, GTSTRUDL, STAAD, RAM, RISA, CAESAR II. USA, British, Euro, China, Russia Codes and Industries Standards.

LekCV

I am an electrical engineer working in Torrent Cables Ltd as electrical maintenance engineer since 1994. I have 12 years exprience. I have exprience of A.C drive, D.C. drive and other electrical instruments.

Aerdynamic principals, aircraft structures and analysis, systems engineering, experienced with MS Office, CATIA V5, ANSYS, and AutoCAD

Civil Engineer

Process Design and Commissioning of Raw Water Treatment Plant, Waste Water Treatment Plant, Demineralization water Treatment Plant, Tertiary Treatment Plants ,Solid and Hazardous waste management, Safety and Environmental Audits etc for mega oil Refineries and Petrochemical Complexes.

Enthusiastic Environmental Geologist with MS in Geology

I have seven years of experiences in the field of water well drilling as a hydrogeologist .

Autocad draughtsman 19 years mainly civil/structural experience

An engineering post-graduate with specialization in environmental engineering. Overall work experience of more than 14 years with majority in Petrochemical.Career Objective-To excel in the field of Industrial Environmental Management by virtue of knowledge, team work and self motivation.

A driven environmental major with positive outlook & expertise in business

I am a bilingual and experienced GIS professional looking for a challenging position with increasing responsibility that requires strong technical skills and proven leadership ability.

Over 10 years of environmental experience with same company! I can provide the following; • Phase I and Phase II Site Assessments • Asbestos inspections • Groundwater studies • Environmental assessment worksheets • Mineral analysis • Hazardous waste compliance audits

Process Engineer with experience in the design, commissioning and operation of a copper smelter. Worked for engineering firms on various projects for lead and zinc, gold, nickel/cobalt and sludge incineration.

In Geotechnics I ensured the supervision, the control and the establishment of design reports for several geotechnical investigations of large civil structures in soft and hard grounds : special foundations, retaining structures, soil improvement and reinforcement by geosynthetics' products,

Geologist and expert of GIS/Remote Sensing and Digital Image Processing

Bachelors degree in Electrical Engineering Technician. Interested in any position utilizing my degree. Very detailed oriented and committed to completion of projects. New graduate seeking employment.

I am currently looking for a position as a maintenance manager, supervisor, or engineer. I am a highly qualified maintenance professional have over 20 years of leadership experience in the manufacturing and production industry. I have obtained exceptional skills and experience in maintenance manage

position as an MEP Design management, Sustainable Design, LEED Facilitation, Building Commissioning, and Building Energy Modeling for High Performance Buildings.

30 years experience in civil and horizontal projects

Detail-focused and culturally-sensitive professional offering more than 20 years of increasingly-responsible experience. Track record of completing complex projects on time and under strict budgetary guidelines without sacrifice to overall project quality

Im an Mechanical Engineer I have full training and exposure in Safety Health environmental code Im fully aware of the OSHA, NFPA, the ISO 14000, ISo 18000, and the ISO 2000 im an auditor for safety health and environment also an inspector for HVAC facilities.

* Seven years concentrated consulting experience * One project was awarded the Grade II "Excellent Designing" by the Construction Ministry of China

Double French/Argentine Nationality Entry Level Environmental Engineer, fluent in Spanish and English languages, willing to relocate world wide. EIA preparation, ISO 14000, Environmental Management & Consulting, Bio diesel technology, etc.

OBJECTIVE Seeking a position with a consulting company as a consultant to utilize a wide background of environmental projects, experiences, and a strong background in computers.

My goal is to pursue a career in the geomatics industry where I can apply my skills to effectively communicate and present results through software customization, database management and maintenance, data analysis as well as continuing to learn new GIS principles and techniques.

PhD, CFD, Fortran, Matlab, C++, Fluent, Gambit, Tecplot, AutoCAD, ArcGIS

Chem Analyst - Laboratory Technician

CA licensed geologist (CEG&RG). More than 24 years of professional experience in engineering geology and environmental consulting in CA & HI, including 16 years as supervisor/owner. Currently self-employed with own environmental consulting firm in HI since 1992. Relocating to AZ (Tucson or Phoenix)

Ability to work in team with high collaboration Capable of achieving personal objectives as demonstrated by successful completion of my degree Excellent analytical and problem-solving skills Extensive experience with public conference and presentation. Good knowledge in radiation protection

Experienced in autocad ,microstation and manual drafting. 32 years in civil and structural design

Over five years of Mechanical Engineering experience in various organizations in US. * Highly proficient in development, design and analysis of Energy systems like Industrial Gas Turbine, Aero derivative Gas turbines, Fuel Cell Systems.

MA(ECONOMICS), PGDCA, HEALTH & SAFETY MANAGEMENT DIPLOMA, FIRE AND SAFETY MANAGEMENT DIPLOMA, FIRST AID DIPLOMA, CONSTRUCTION SAFETY CERTIFICATE, COSHH CERTIFICATE, SAFETY MANAGEMENT CERTIFICATE, OHSAS-18001-1999 HEALTH AND SAFETY INTERNAL AUDIT, ENVIRONMENT AWARENESS CERTIFICATE, MANUAL HANDLING CE

Civil Engineer expert in computer and water sector

More Than five years of professional experience in: Analyzing Business requirements. Usage of ArcGIS, ArcIMS, ArcSDE, ArcXML and ESRI based products.

Summary of Qualifications,Combined experience in Industrial Refrigeration Technician / Electrician Technician in the Pharmaceutical Industry,Petro chemistry, Building Management System (BMS), Ship Systems, Maintenance and Troubleshooting.

I have exp. 16 months as fire&safty supervisor, 18 months as a electrical technician

Fifty Years Total Experience in process engineering and technology development. Including More Than Twenty Years Process Engineering Experience on petroleum refinery, oil & gas production and petrochemical projects. Experience includes process simulation software Hysys/Pro II/Dynsim/Aspen.

Petroleum Geologist with 20 years international experience

Pro/ENGINEER, AutoCAD, SAS, Microsoft Office, MSC NASTRAN

A Mechanical Engineer with over 11 years of proven functional experience and can perform various roles in Manufacturing, Programming ,Design and Materials Procurement / Material Management.

I am the head of the laboratory at the moment. I have been working in the metrology field for 6 years and I deal with the following: preparation of gas mixtures by gravimetric and dynamic methods, gas analysis on GC, NDIR, FTIR and others. As the head of the lab I deal with clients.

LOOKING FOR A CHEMIST AND/OR ENVIRONMENTAL POSITION THAT ALLOWS ME TO APPLY MY 9 YEARS OF EXPERIENCE AND EDUCATION IN CHEMISTRY.

Experienced Industrial Structural Engineer - concrete, steel - 20+ years, UK & US codes

Exceptional performance as a Senior Process and Production Engineer for major industrial, polymer, refining, and specialty chemical manufacturing companies on the Texas Gulf Coast.

Diploma In Mechancial Engineering+NEBOSH Level-3+Environment, Health and Safety Management Specialist Certification from NASP of USA+ ISO 14001:2004 & 9000:2000 Certified Lead Auditor with 15 Years Experience in Oil&Gas as HSE Advisor/Engineer/Supervisor/Coordinator/

Wetland Studies, Wildlife Research, Environmental Assessment, Endangered Species Survey

I have: . Master's Degree in Geology . 4 years research experience . 2 years teaching experience . An impressive career of field works including mapping . Efficiency in sampling of rock and soil from outdoors . Extensive training and experience in laboratory.

Senior Structural Designer whom has been on both sides of construction. I started out on the tools and made my way into the design and engineering. Please review the letters of reference on my website. My background has always been an asset in the design office.

I have a 6 years diesel mechanic in kuwait and at present i am working in afghanistan as a Sr Wheel vehicle mechanic.

1 2 3 4 5 6 7 [ 8 ] 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out