Resume - Diploma Engineer in Petroleum as well as Industrial Safety, possessing good exp...

Misco Jobs

Resume #11821

CONTACT INFORMATION:
View contact information...

It is my honour to forward my CV for the Safety Officer/Engineer/Coordinator position in Oil & Gas Project or Offshore or any other project anywhere in the Middle East or in the World.

The prime and foremost responsibility is to deliver my splendid efforts not only to safeguard the Project but to protect the Environment as well as the Mankind.

Being a Diploma Engineer in Petroleum as well as Industrial Safety, and possessing relevant experience in Oil and Gas Plant construction and commissioning activities, I strongly believe that I can shoulder all the assignments to achieve the Organization goals.

Oil & Gas Projects where I worked:

- Crude Oil Lifting Project at Azerbaijan
- OMIFCO Project in Sur, OMAN
- NGL Project of Qatar Petroleum
- Command Petroleum

Special Skills
- HSE Management system for Construction and Commissioning activities of Oil & Gas Plant.
- Off-shore construction
- First Aider
- Fire Fighter
- MS Office
- Good English
- Gulf Driving License
- Train the trainer
- Worked with Multi National Workforce
- PTW Coordinator and Area Authority

EDUCATIONAL QUALIFICATIONS:
- Diploma in Petroleum Engineering
MRL Polytechnic, Manali, Chennai - 600068
Tamilnadu, Inida

- Diploma in Industrial Safety
Annamalai University,
Chidambaram, Tamilnadu, Inida

EMPLOYMENT RECORD:
- Have been working as a Safety Officer in Petrofac International Ltd., in
Azerbaijan for British Petroleum – Crude Oil Lifting Project. (From August 2004
To till date)

- Worked as a Safety Officer in OMIFCO Project, Joint venture
Snamprogetti & Technip-Coflexip, Hani Archirodon LLC, P.O
Box. No. 816, Sur, Sultanate of Oman (From Jan 2003 to July 2004)

- Worked as a Safety Officer in NGL -4, Arab – D Plant Expansion
Project of Qatar Petroleum for the Main Contractor Snamprojetti
& Hyundai Joint venture, Mecon, P.O.Box No.3325, DOHA,
QATAR. ( From June 2001 to June 2002)

- Worked as a Safety Officer in Oil & Gas Project of
COMMAND Petroleum (India) Pty. Ltd., Chennai, Tamilnadu,
INDIA. (From August 1995 to June 2001)

- Worked as a Process Operator in ICI India Ltd, Ennore Works,
Ennore, Chennai, Tamilnadu, India. (From Jan 1988 to August 1995)

SPECIAL COURSES:
- First-Aid – TATI, Sultanate of Oman
- Fire-fighting
- Trainer the Trainer – RLI, Chennai-20
- Area Authority – PTW - British Petroleum, Azerbaijan
- PTW Coordinator – British Petroleum, Azerbaijan

Nature of Duties and Responsibilities:
Safety Activities Performed for the Construction Commissioning of Crude Export Project, British Petroleum & Petrofac International Limited Joint Venture, Baku, Aazerbaijan.(From August, 2004 to Till Date)
- HSE induction as well as other safety training to the work-force.
- Fire-fighting training to the workforce.
- Conducting Risk Assessment.
- Accident / Incident Investigation.
- Implementing and ensuring STOP, ASA Systems.
- Conducting HSE Audits and Attending HSE and Planning meetings.
- Administrative support to HSE Management as well as Top Management.
- Controlling and ensuring the Safe Lifting Procedures and advising the Departmental
Heads as well as the workforce.
- Facilitate First-aid to the injured person.
- Co-ordination with the rescue team during emergency.
- Controlling of Hot Work –Naked Flame, Hot Work – Spark Potential, Cold Work, Cold
Work – Breaking containment, Confined Space Entry and Formal Procedure etc.
- Gas Testing and Monitoring.
- Inspection of Scaffolding, Putlog Scaffolding, Independent Scaffolding, Birdcage
Scaffolding, Mobile Scaffold tower, Inspection of footings, Standards, Ledgers,
Bracings, Putlogs and Transoms, Couplings, Bridles, ties, Boards, Guardrails, toe boards, Ladders, Proper access, etc.
- Inspection of Lifting Tools and Tackles to be used for critical and heavy lifting.
- Monthly inspection of all rigging gears along with execution department and enforcing colour coding.
- Recommending various caution signs as per the job requirement and get it placed.
- Conducting tool- box meeting and maintaining their records.
- Inspection of Fire Extinguishers and record keeping.
- Ensuring the ISSOW.
- Constantly visiting the worksite and periodically auditing PTW System and checking and ensuring the compliance.
- Interaction with Area Authority, Performing authority, Isolation Authority, Authorized
Gas Tester, etc.
- Monitoring Environment and Waste Management.
- Preparing Weekly Reports and Monthly Reports.

Safety Activities Performed for the Client Oman India Fertiliser Project, SUR, Sultanate of OMAN, Joint venture of Snamprogetti, Italy & Technip-coflexip, France{Hani Archirodon Construction (Overseas) CO S.A., from Jan 2003 to July 2004}
- Controlling the Permit to Work System for the following:
Hot work & Cold Work Permits, Confined Space Entry
Permits, Excavation Permit, Electrical Permit, Lock- out and Tag Out, Hydro Test Permit, Radiography Permit, etc.
- HSE induction as well as other safety training to the workforce.
- Fire-fighting training to the workforce.
- Facilitate First-aid to the injured person.
- Co-ordination with the rescue team during emergency.
- Rescue an injured person from the barge and off-shore to the on-shore.
- Preparing Weekly Reports and Monthly Reports.
- Hazard analysis, Hazard identification and Risk assessment for various activities in the project.
- Monitoring keenly all the activities and advising entire workforce on all HSE matters.
- Preparation of safety reports and submission to the Management as and when required.
- Co-ordinate with client and management to achieve the desired safety standards.
- Schedule and conduct frequent training on all safety related subjects for the workforce.
- Conducting toolbox talk and maintaining their records.
- Maintaining good standards of HSE at all the levels.
- Encouraging Zero incident policy.
- Motivating all the workforce to maintain the safety culture as well as positive attitude to follow a particular Safety Method to perform the activity without any untoward incident.
- Hosting HSE meeting and interact with all the levels and encourages to avoid the accidents.
- Awarding the good safety achievers with compliments and conducting inter departmental competitions regarding safety matters.
- Formulate the Fire Emergency Procedure for the marine, camp and site facilities.
- Impart Sea Survival and Offshore Evacuation Training and conducting on-shore and off-
shore emergency evacuation mock-up drills and evaluate its effectiveness.
- Co-ordinate and arrange Third Party Inspections for all types of cranes and all types of lifting gear.
- Recommending various caution signs as per the job requirement and get it placed.
- Conduct regular site inspections and advising the supervisors for any violations and to rectify the defects if anything persists.
- Inspection of scaffoldings.
- Inspection of fire extinguishers and maintaining the records for the same.
- Inspection of vehicle, plant and machinery.
- Inspection of power driven and hand tools.
- Periodical inspection and colour coding of rigging equipments.
- Controlling and issuing of all types of work permits and maintaining the records and monitoring all the activities and confirming the compliance in all aspects.
- Inspection and maintenance of Personnel Protective Equipment and proper usage of the same by all.
- Inspection of First Aid facilities at on-shore and at off-shore.
- Conduct audits in the camp and canteen facility.
- Monitoring environment protection and waste management system and its effectiveness.
- Controlling and containing oil spill in the off-shore.
- All types of Mobile, Crawler, Tower and Overhead cranes, Excavator, Wheel loader, Fork lift, Trailer, Concrete pumps, Transit mixer and dump trucks.
- Heavy lift and transportation of materials.
- Under water block placement
-* Inspection and controlling of Hydraulic Rotary Drilling Rig activities for Tubular piles installation and Off-shore construction of Jetty Road way, Loading platform and mooring dolphins construction, Sea Water Intake & Out fall channels and laying of RTRP
Pipes for water drawing and sending back to the sea.
- Maneuvering of Jack up barge, Floating crane barges, Dredgers, Deck barges, Split barges, and Tug boats.
- Inspection and controlling of Diving activities.

Nature of duties and Responsibilities:
Safety Activities Performed for the Construction and Commissioning of Arab-D -Gas Recycling Plant, Dukahn Site for the Client Qatar Petroleum, ( June 2001 to June 2002 - Joint venture of Snamprogetti, Italy & Hyundai)
- Controlling the Permit to Work System for the following:
Hot work & Cold Work Permits, Confined Space
Entry Permits, Excavation Permit, Electrical Permit, Lock- out and Tag Out, Hydro Test Permit, Radiography Permit, etc.
- Gas Testing and Monitoring.
- Inspection of Scaffolding, Putlog Scaffolding, Independent Scaffolding, Birdcage
Scaffolding, Mobile Scaffold tower, Inspection of footings, Standards, Ledgers,
Bracings, Putlogs and Transoms, Couplings, Bridles, ties, Boards, Guardrails, toe boards, Ladders, Proper access, etc.
- Inspection of Lifting Tools and Tackles to be used for critical and heavy lifting.
- Monthly inspection of all rigging gears along with execution department and enforcing colour coding.
- Enforcing existing safety system such as risk assessment, Pre-work briefing for each activity and record keeping.
- Recommending various caution signs as per the job requirement and get it placed.
- Conducting tool- box meeting and maintaining their records.
- Checking the hygienic conditions at the work place.
- Inspection of Fire Extinguishers and record keeping.
- Enforcing the system of reporting the incidents and accidents.
- Investigation of incidents and accidents along with the responsible team leader and recommending the preventive measure for avoiding the reoccurrence.
- Inspection and maintenance of Personnel Protective Equipment and First Aid facilities.
- Monitoring Environment and Waste Management.
- Inspection of flammable materials and storage facilities.
- Accident, incident and near miss investigation and suggesting remedial measures to the management to prevent reoccurrence.
- HSE induction as well as other safety training to the work-force.
- Fire-fighting training to the workforce.
- Facilitate First-aid to the injured person.
- Co-ordination with the rescue team during emergency.

Nature of Duties and Responsibilities:
Oil & Gas Plant Operation:

Plant Capacity: 800 MMSCFD
Production
1. NGL: 750 tons per day (C3, C4)
2. Condensate: 40,000 BBLS per day (C5, C6,. ..+)
3. Injection Back to wells: C1 and C2 gases.
4. Produced Water: Pumping into the disposal well.

Facility & The production Trains:
There are 21 production wells. The feed to the Gas Plant is 800 MMSCFD. The feed Stream arrival conditions at the 3-phase separators are 103barg and 57 / 45 oC (Summer/Winter respectively).

All the production wells are provided with chemical injection (dosing) facilities. Corrosion inhibitor (CK-915) is being injected to the Feed Flow lines @ 6 lts per day to avoid corrosion of the headers.

All the production headers join and enter at the 3-phase separator where Gas, Hydrocarbon Liquid and produced water get separated out. The produced water goes to the produced water flash drum and then to the oily water sewage and leads to the surge pond. Hydrocarbon liquid goes to the liquid processing train and the Gas goes to the Gas Processing Train.

Gas Processing Train (Stream)

Gas Flow from the 3-phase separator is controlled by 'FCV' flow control valve and is heated in HP Expander Pre-heater to 57 oC. Then it expands across HP Expander. Here the pressure of the Gas is reduced to 60 Barg and the condensed liquid is separated out in HP Expander outlet drum. The condensed liquid goes to Stripper column under level controller.

The Gas then goes to the Gas Dehydration unit for drying. After dehydration (Mole sieve Dehydration unit) the Gas is cooled down in Gas / Gas Exchanger and the liquid gets separated out in cool separators. Then the Gas expands across LP Expander. Here the pressure of the Gas is reduced to 45 barg and the condensed liquid separated out in LP Expander outlet drum.

The liquid from cool separator and LP Expander outlet drum goes to Stripper column.

The Gas then gets heated in Gas / Gas exchanged and compressed in LP Expander compressor first and then HP Expander compressor to 60 Barg. Then it goes to Injection booster compressors, where the pressure of the Gas is increased to 180 Barg and gets injected back to the reservoirs.

Hydrocarbon Liquid Processing Train (Stream)

Hydrocarbon Liquid from the 3-phase separator pumps out to the Filter coalescer by using Stripper feed pump. Here also corrosion inhibitor is injected @ 48 lts per day. In filter coalescer the suspended particles get filtered off and the carry-over water gets settled down. Then the HC liquid goes to 1st stage Stripper pre-heater and then to condensate flash drum. The flashed off lighter Gas goes to Gas Dehydration unit and the liquid goes to 2nd stage Stripper pre-heater. The heated liquid then enters Stripper column between 9th and 10th tray. Liquid from cool separator and LP Expander outlet drum enters the 2nd plate via Pre-Stripper coalescer.

The Lean Gas from Stripper column leaves from the top and gets compressed in Recycling compressor and joins upstream of Gas Dehydration unit (GDU).

The Stripper column pressure is maintained at 27 barg and the bottom temp is maintained at 190 oC. The liquid from Stripper bottom goes to Stabilizer and enters above the 16th plate. The top vapours (NGL) get condensed in condensate Flash drum and accumulated in Stabilizer Overhead Accumulator and then goes to Liquid Dehydration Unit (LDU). This NGL then pumps out by using NGL pipeline pump. The Liquid from the bottom of the Stabilizer is Stabilized condensate, which gets cooled down in 2nd stage Stripper pre-heater and 1st stage Stripper pre-heater and then is condensate product cooler. Stabilizer column pressure is maintained at 15.5 barg and the bottom temp is maintained at 192 oC.

Emergency Shutdown System (ESD)

The ESD System achieves its goal by three main actions:
- Blow-down of the gaseous hydrocarbon to flare
- Hydrocarbon inventories segregation, via shut-down valves
- Shutdown of rotating equipment (compressor, air heat exchanged fans)

These are organized by assigning distinct levels of emergency shutdown:

- Red Shut-down: Plant shutdown with depressurization
- Orange shut-down: Unit shutdown with depressurization
- Yellow shut-down: Unit shutdown without depressurization

Red shutdown and Orange shutdown required acting that can be initiated only manually. Yellow shutdown can be initiated either automatically or manually. Manual actions will be performed by means of push buttons located within the control and the solenoid valves must be manually reset locally.

Field Activities:
- Receiving Instructions from control room and attending the field problems, rectifying the same and normalizing the system and giving feed back to Control Room over Radio.
- Pipeline Pigging Operation – Pig Launcher, Pressure gauge, Vent, Pressure relief,
Drain, Pig Signaler, Kicker valve, Mainline bypass valve, Mainline trap valve, Quick release closure, Pig receiver.
- Hydrocarbon and H2S Release and Gas Monitoring
- Personal Protective equipments usage.
- Good Housekeeping
- Permit to Work system – How work, Cold work, Entry permits, Isolation Permits, etc.
- Fire Classification – A class, B class, C class & D class fires.
- Fire Prevention & Fire Fighting – Deluge valve, Fire Hydrant, Fire Monitor, Fire hose
Cabinets, Foam/water hose reel, Hand held fire extinguisher – Dry Chemical Powder,
Foam, CO2 and water also, Wheeled fire extinguisher, Safety shower and eye wash,
Breathing apparatus, Emergency Escape set, etc.

UTILITIES
Instrument Air Generation
Compressed feed air is pre-filtered by means of the filters A/B order to eliminate any presence of suspended material in the feed air, than the heatless air drying process take place in air dryers. The air dryer shall reduce the dew point of the air, under operating pressure to –30 0c at 9 barg. The air dryer is twin-vessel adsorption type, with heatless regeneration at atmospheric pressure; the vessel is depressurized slowly to prevent blowing out and / or fragmentation of the desiccant, and to reduce exhaust noise. After the desiccant has been regenerated, the vessel is pressurized slowly before switchover. After-filters A/B are installed to prevent desiccant particles from entering the instrument air distribution to users.

Nitrogen
The Nitrogen generation package produces gaseous Nitrogen by means of separation from oil free compressed air through membrane modules. The package is capable of continuous Nitrogen production working through the entire range of these pressures. In case of very low pressure in the instrument air network, and On/Off valve on the feed line will close the feed line will close the feed air to the Nitrogen Generation Package.

Equipments Handled
Well Heads: (Christmas Tree)
Outer Casing, Inner casing, Production Tubing, Sub Surface Safety Valve (SSSV), Surface Safety Valve (SSV), Lower Master Valve (LMV), Upper Master Valve (UMV), Inner Wing Valve (IWV), Outer Wing Valve (OWV), Swab Valve, Bean Choke, Test Separator, Gas Oil Ratio (GOR), Basic Sediments & Water (BS&W – 0.03%) Salinity – 20 Pounds per Thousand Barrels (PTB).

3-phase Separator, Gas, Hydrocarbon liquid, Water Separation, Chemical injection (Dosing) CL-914 corrosion inhibitor, Inlet Gas Filter Separator, HP Expander Pre- heater, Joule-Thomas Valve, HP Expander, HP Expander outlet drum, Gas Dehydration Package, Gas / Gas Exchanger, Gas / Liquid Exchanger, Cool Separator, LP Expander, LP Expander outlet drum, LP Expander Compressor, HP Expander Compressor, Booster Compressor Suction drum, Anti surge Control, Inlet Guide Vanes, Journal Bearings, Thrust Bearing, Lube Oil System, Seal Oil System, Suction drum pressure control, Discharge drum pressure control, Turbine Speed control, Injection Compressor, Inter Cooler, Injection Compressor After Cooler, Knock-out (KOD) drum, Injection Gas sphere Launcher, Flare System.

Pre-Stripper Coalescer, 1st stage Stripper, Pre-heater, Stripper column, Stripper Reboiler 2nd stage Stripper Pre-heater, Recycle Gas Compressor suction drum, Recycle Gas Compressor, Gas Dehydration Unit, Stabilizer column, Reflux condenser, Stabilizer overhead accumulator, Condensate Product Cooler, Condensate Pipeline sphere Launcher. Single & Multi stage Centrifugal Pumps, MOV-Motor Operated Valves, SDV –Shutdown Valves, Blow down Vales (BDV), Safety Relief Valve (SRV), Pressure Control Valve (PCV), Flow Control Valve (FCV), Level Control Valves (LCV), Temperature Controller (TCV).

I hereby declare that the above information made in the application is complete and true to the best of my knowledge and belief.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 851 to 900 of 1527)

Go to Search Parameters...

Brief Description

German Language Malay Student

A position with a construction company which requires skills in field engineering, cost controlling, planning, scheduling, and estimating

Bachelors Degree in CHEMICAL ENGINEERING with Masters in BUSINESS ADMINISTRATION. Cumulative work experience of 8+ years in Hydro metallurgical Zinc manufacturing company.

Laboratory Analysis, Administration, Safety

CIVIL ENGINEERING; LAND SURVEYING; COMPUTER AIDED DRAFTING (CAD)

ms project,autoCad 2008(2d,Isometric,3d modeling),B.Eng in Metallurgical and Materials Engineering,Planning,cost estimating and control,job schedulling,WBS,manpower and site mobilization,EVA,S-curves,Risk management,Project Evaluation

Instrumentation I&C DCS Technician

Rotating & reciprocating equipment technician

M.Sc Environmental Biotechnology (1 yr), Bachelors in Fisheries Science (4 yrs), holding ISO-14001 & Occupational Helath and Safety Assesment Series training certificate.

A chartered marine technologist with a broad cross discipline outlook with particular experience in the legislative, quality and risk management aspects of the upstream oil and gas industry.

Provide Project Control Scheduling Support

Bachelor Degree in Mechanical (Industry)

Qualified fitter and turner,ncr computer and equipment technician, diamond mining expierience, electro mechanical experience. steam turbines and related equipment experience

As an Electrical Engineer with some Experiences and Qualifications, include Instrumentation, PLCs, Control and Automation, High Technology Machineries and Equipmens Applications Skill, Engineering & Project Management, Computer Applications, Communications, and Leadership Skill.

Solid Waste Management, Health, Safety and Environmental Management, Fumigation, Site Inspection, First Aid Service etc.

SALES , MARKETING AND PROPOSALS ENGINEER.

I am a civil engineering technologist with 29 yearsof national\international experience seeking opportunties in construction management, supervision, QA\QC. Work experience includes heavy civil works for mining\process facilities, petrochemical, industrial, commercial\institutional, and municipal

A highly motivated intelligent manager, who is very hard worker both individually and in a team, copes well under pressure, well presented, enthusiastic. Excellent communications skills, creative, and problem solving skills, and an effective organizer. Adaptable to new situation, determined

Completed Diploma in Industrial Safety from NATIONAL INSTITUTE OF INDUSTRIAL RESEARCH & DEVELOPMENT (NIIRD), Chennai 1996.

Over 25 years of design and engineering experience; providing design, engineering and management services for a variety of projects and fields. Expertise includes estimating, conceptual and finalized layouts, piping design, instrumentation, process, P&ID development, sizing/specifying/requisitioning

Surveyor, QC, upstream, oil, gas, seismic, geophysical, exploration, production, pipeline, module, construction

Having 5 years experience in mining operation and related management of environment. Also 4 years of experience in Marketing of Earth Moving/Mining Eqpts. Btech Degree in Mining Engineering, PG Diploma in Environmental Management, Also PG Diploma in Business Management

Civil Engineer - Contracts, Cost Estimation, Tendering, Cost Control, Claims & Arbitration

i have under gone series of hands on equipment training at port harcourt refining company,nigeria.

EIT with educational background in chemical and environmental engineering, Knowledge in waster water and environmental regulations.

A holder of a BSc Physics and a postgraduate diploma in Land and GIS,I am a geophysicist both by training and experience.I have over one year's experience in ground geophysical surveys specialising in mineral exploration.

Highly experienced and qualified Driller/Blaster, having significant management responsibility and a detailed knowledge of a wide range of the equipment used in the industry.

Instrumentation Calibration

2+ years exp in telecom field

Bilingual Law Graduate seeking Petroleum Landman Position

Masters of Engineering, University of South Australia, Adelaide, Australia, July 2007,Ansys v 7.1,Master CAM,Plant layout and material handling,Pro – E Wildfire,Robotics & Automation,Auto CAD

MAINTENANCE ENGINEER, GAS TURBINE, FITTER

21 years EPC experience Reading and Interpreting Contract Drawings, Defining Project Scope, Creation of EPS/OBS/WBS, Performing Detailed Quantity Surveys, Cost Estimating, Identifying Resource Requirements, CPM Scheduling, Cost/Resource Management & Implementation of ANSI/EIA-748-A EVMS Guidelines.

*Autocad *reading and interpeting ISOs *Measurements While Drilling operation and reporting *Water Analysis *Tree core analysis *Soil Analysis *Interpreting Geological Lithologies (core samples)

Looking for Electrical power job anywhere.

I'm a 23 years old guy done with his Electronics BS degree with minor study of Biomedical engineering and a 3years experience in this field and I'm going to graduate with my second BS degree in Electrical engineering in February 2008.. I'm looking to be a part of a team in good company..

Highly motivated and result driven maintenance engineer with more than 22years of continuous experience.

Staff Engineer

Sub: Application for the post of Head (Geotechnical Design)

I will be completeing my degree in June 2005. Geoscience skills include slope stability assessment, geological and geomorphological mapping, risk, hazard and vulnerability assessment, geotechnics, seismology, rock engineering.

Experience as a project manager, technical leader and project engineer. Educational background in design projects and research.

Computer, Cement Plant, Program (Excel,Word.Power Point,Autocad)G.P.A 3.4,Good Comunication,ect

Presently working as Safety officer at EQUATE Petrochemical company at KUWAIT Since 2006. I have completed bachelor of science in Mathematics , Diploma in Industrial Safety Manegement and other related courses for safety officer

Continous Improvement Engineer / Blackbelt : I am a Six Sigma Academy trained DMAIC BlackBelt. I have a detailed knowledge of DMAIC methodology and 15 years successful practical experience of applying Lean/ Continuous Improvement Techniques in the demanding automotive engineering sector.

Safety fire environment health engineer nebosh

6 months (until Feb 2008) as an Exploration Geologist for a FIFO Pilbara minesite; experience at creating drill proposals, sample logging, result analysis. Experience with GIS software (MapInfo) and have basic modelling skills via Micromine. Graduated Geology BSc Hons Uni of Bristol, UK July 2007.

Diploma Engineer in Petroleum as well as Industrial Safety, possessing good experience in Oil and Gas, HSE Management, Offshore Construction, Fire Fighting, First Aid, MS Office, Driving, Good English, Worked with Multi National Workforce, Emergency Evacuation, HSE Induction, Safety Training, etc.

Free! Senior Mechanical Engineer / Project Engineer

Professional engineer with wide ranging international experience in project, engineering, reliability, business development, sales and commissioning of refinery.

Good communication skills and excellent goals getter. A graduate of Applied Geophysics with hons, from O.A.U, Ife, Osun State, Nigeria. My career objective is to obtain a challenging position in a well structured organization that lays emphasis on excellence, goals achievement and self development.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ 18 ] 19 20 21 22 23 24 25 26 27 28 29 30 31

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out