Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #1191
next resume »»
CONTACT INFORMATION:
View contact information...
To Whom It May Concern,
I am an Australian citizen recently arrived in Canada and I have been awarded with a one year working visa for Canada. Following my completion of a Bachelor of Environmental Engineering and a Masters of Engineering Science at the University of New South Wales (Sydney, Australia) I am very keen to gain employment in the environmental engineering sector.
My BE has provided me with the ability to work in a broad range of fields, including water resource management, noise and transport engineering, geotechnical engineering, coastal protection, and environmental planning. Further to this my postgraduate work concentrated on hydrogeology – covering geophysical surveys and other investigative techniques, hydrogeochemistry, and groundwater and subsurface contamination and remediation.
I understand that on-the-job training is a vital part of professional development, and this coupled with my work ethic, enthusiasm to learn new skills, and education makes me believe that I’d be an asset to any potential employer.
I am currently staying in Toronto, and would be interested in working within Ontario if at all possible. Regarding my CV, which follows, my references are available, but I do not have them in electronic form – I am happy to mail or fax them at your request.
Birthdate: 26/5/78
Birthplace: Canberra, AUSTRALIA.
Canadian Working Visa eligible: May 2002-May 2003.
Educational Qualifications
Bachelor of Engineering (Environmental) with Honours 2nd Class, Division 2.
Degree completed in 2000 and awarded by the University of New South Wales, Australia.
Masters of Environmental Engineering Science (Groundwater Studies).
Degree completed in 2001 and awarded by the University of New South Wales, Australia.
Academic Referee: Dr Ian Acworth
Position: Director of UNSW Groundwater Centre, and Senior Lecturer at UNSW.
Phone: (+61) 2 9949 4488 or (+61) 2 9385 5766
Email: I.Acworth@unsw.edu.au
Employment History
November 2001-March 2002
Senior Bar Attendant and Cellar man at the Railway Tavern.
Employer contact: Dave Richards or Steve Bailey.
Employer address: 15 Liverpool St, London ENGLAND.
Duties included:
• supervision of around 8 staff
• restocking of bar
• service and preparation of food and beverages
• management of cellar
• fielding customer enquiries
December 1999-February 2000
Junior Project Engineer for Incoll Management.
Employer contact: Steven Gorton or Robert Stuart.
Employer address: 225 Miller St, North Sydney, Sydney AUSTRALIA
Duties included:
• preparation of tender documents
• assessment of submitted tender offers
• liaising with Council, government organizations, utility providers and subcontractors
The particular project I was employed on involved the remediation of a large former industrial site, and the design and construction of a mixed commercial and residential development in central Sydney.
May 1997-September 2001
Bar Supervisor and Bar Attendant at the Beach Palace.
Employer contact: Shane Curry or Cameron Armstrong.
Employer address: 169 Dolphin St, Coogee, Sydney AUSTRALIA.
Duties included:
• supervision of around 15 staff
• preparation service of food and beverages
• money handling and cashing-up at end of operation
• managing of cellar and re-stocking procedures.
November 1994-February 1997
Shop Assistant at the Logical Choice.
Employer contact: Tony Carlin or Glenn Doyle.
Employer address: Shop L5, Canberra Centre, Canberra AUSTRALIA.
Duties included:
• service of customers
• ordering of new stock
• handling and banking of money
• supervision of shop staff.
Other Qualifications:
CAPS Course (1998) – Sports Coaching course taking school-age children for sports training sessions and various outdoor activities.
Responsible Service of Alcohol (1999) – Course legally required in Sydney for work in the hospitality industry. Demonstrates ability to deal with inebriated or aggressive customers in a bar or restaurant environment.
Personality
Hardworking – always looking for work to be done and trying to avoid being idle. This is especially the case in a team situation where someone else is dependent or affected by my performance.
Communicative and relaxed – able to relate well with others, which serves me well as a mediator and go-between. This also promotes a better working relationship with peers and colleagues.
Honest – consider myself to be trustworthy and reliable. If faith is put in me or my ability then I do my best to repay that confidence.
Skills
Through my tertiary education, employment and everyday life I have become familiar with most Windows-based computer systems, and I am confident in my ability to learn more about those and other programs if necessary. I also have some experience with hydrogeological programs such as MODFLOW and FEFLOW, as well as the hydrogeochemistry tools WATEQ and NETPATH.
My MEngSci courses also required the use of groundwater investigative techniques, including:
• Electrical conductivity and imaging equipment and software
• Seismic surveys
• Borehole geophysics, especially neutron logging
For my Masters Project I performed an analysis on whether Electrical Imaging could be used effectively as a method for determining soil moisture in conductive swelling clays. To complete this project I had to have a sound theoretical knowledge of both electrical conduction mechanisms and neutron logging techniques in these types of clays.
Interests
• Sport and fitness
• Current Affairs and History
• Travel
Academic Record
Degree MEngSc
Completion 1/3/2002
Specialisation Groundwater Studies
2001
Session Session One
CVEN 7810 Electrical Methods G'water Investigation 79 DN
CVEN 7823 Applied Groundwater Modelling 81 DN
CVEN 7830 Physical Aspects of Contaminated G'water 72 CR
CVEN 9930 Masters Project EC
GEOL 9053 Hydrogeochemistry 71 CR
GEOL 9054 Analysis of Hydrogeochemical Data 69 CR
GEOL 9055 Hydrogeochemical Modelling 72 CR
GEOL 9111 Groundwater Environments 69 CR
GEOL 9112 Investigation & Management of Salinity 63 PS
TERM WAM : 72.000 (note: WAM is the “weighted average mark” for the session)
Session Session Two
CVEN 9930 Masters Project 81 DN
Degree BE
Completion 12/7/2000
Level Honours Class 2 Division 2
Specialisation Environmental Engineering
2000
Session Session One
CVEN 4008 Industrial Training 73 CR
CVEN 4224 Geotechnical Engineering 2 53 PS
CVEN 4525 Water Engineering 3 69 CR
CVEN 4533 Transport & Fate of Pollutants 66 CR
CVEN 4721 Environmental Engineering Practice 4 77 DN
CVEN 4722 Environmental Policy, Law & Economics 73 CR
CVEN 4723 Waste Management 79 DN
GMAT 0753 Intro to Spatial Information Systems 82 DN
TERM WAM : 71.808
Session Session Two
CVEN 4269 Environmental Geomechanics 73 CR
CVEN 4549 Adv Catchment & Coastal Processes 72 CR
CVEN 7807 Groundwater Hydrology 85 HD
CVEN 7808 Investigation of Groundwater Resources 79 DN
CVEN 7809 Geophysical Techniques 85 HD
CVEN 9773 Introduction to Rock Engineering 50 PS
GEOG 3921 Coastal Resource Management 69 CR
WAM : 72.731
1999
Session Session One
CEIC 0050 Atmospheric Process Chemistry 62 PS
CVEN 3015 Engineering Computations EC
CVEN 3116 Engineering Management 1 EC
CVEN 3214 Geotechnical Engineering 1 EC
CVEN 3428 Transport & Noise Engineering EC
CVEN 3517 Water Engineering 2 EC
CVEN 3710 Environmental Engineering Practice 3 EC
GENL 7000 Mining and Petroleum Law 73 CR
GENM 0703 Concept of Physical Fitness & Health 64 PS
Term WAM : 66.382
Session Session Two
BIOS 3301 Ecology for Environmental Engineers 72 CR
CVEN 3015 Engineering Computations 78 DN
CVEN 3116 Engineering Management 1 67 CR
CVEN 3214 Geotechnical Engineering 1 62 PS
CVEN 3428 Transport & Noise Engineering 61 PS
CVEN 3517 Water Engineering 2 60 PS
CVEN 3521 Principles & Applications of Aquatic Chem. 79 DN
CVEN 3710 Environmental Engineering Practice 3 75 DN
TERM WAM : 70.227
1998
Session Session One
CEIC 0010 Mass Transfer & Material Balances EC
CIVL 2321 Engineering Mechanics & Materials EC
CIVL 2710 Environmental Engineering Practice 2 EC
GENC 2001 Introduction to the Australian Economy 57 PS
GENT 0702 Military Strategy & Crisis Diplomacy 75 DN
INDC 4120 Chemistry of the Industrial Environment 77 DN
MATH 2019 Engineering Mathematics 2CE EC
MATH 2869 Applied Statistics Sc 71 CR
Term WAM : 69.909
Session Session Two
BIOS 1101 Evolutionary & Functional Biology 62 PS
CEIC 0010 Mass Transfer & Mat Balances 66 CR
CIVL 2321 Engineering Mechanics & Materials 59 PS
CIVL 2515 Water Engineering 1 61 PS
CIVL 2710 Environmental Eng Practice 2 78 DN
MATH 2019 Engineering Mathematics 2CE 56 PS
WAM : 65.155
1997
Session Session Two
CHEM 1101 Chemistry 1A 57 PS
CIVL 1312 Statics 50 PS
CIVL 1710 Environmental Engineering Practice 1 EC
MATH 1131 Mathematics 1A 63 PS
PHYS 1979 Physics 1 (Civil Engineering) 60 PS
TERM WAM : 58.519
Session Session Two
CHEM 1201 Chemistry 1B 50 PS
CIVL 1015 Computing 70 CR
CIVL 1710 Environmental Engineering Practice 1 70 CR
GEOG 1031 Environmental Processes 72 CR
MATH 1231 Mathematics 1B 59 PS
Term WAM : 63.440
3625 EnviroEng Environmental Engineering Totals
WAM: 65.252
3627 EnviroEng Environmental Eng/MEngSc Totals
WAM: 67.502
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 201 to 250 of 1558)
Go to Search Parameters...
Brief Description
Experienced Electrical Engineer with Professional License
Expertise in analysis of Chemicals, petrochemicals, petroleum products using instruments like ICP-OES, GC, HPLC, AAS, FTIR, CS Analyzer etc. Having expertise in SPC / SQC techniques, LIMS and SAP QM module. Research in Petrochemical and petroleum products. Worked for Chevron Oronite lube additive co
Environmental Health and Safety Auditing , Preparation of EIA & EMP Reports , Proficiency with Regulatory Compliances , Air Quality Modeling & Prediction, Contaminated Site remediation, GIS Image Processing and Mapping , Chemical analysis
B-Tech(electronics/communication)
I am in plastics profession, making moulds,mould design,conversion of metal part into plastic material, developing tool for prototype product,plasssssstics material selection for new product, concept development works, do hand sketches,mouldflow anaysis plastics product, updating myself for new,
Environmental Specialist
I am basically possessing engineering background with enough experience in organisation and can able to perform all kinds of works pertaining to my field. i am having 10 years of handful experience and can deal any work effectively and complete the same within time schedule.
My area of expertise is in Clastic Digenesis. I have a background in sediment logy, sedimentary petrology, and geochemistry. My graduate work was expanded to include courses in environmental aqueous geochemistry and hydrology.
Worked extensively in the field of Environmental Management. Have about 4 years of working experience in two World Bank funded project as Environmental Management professional. Also worked in the field of Environmental chemistry, associated with air quality monitoring in project area.
Construction & oil and gas & auditing
technical and professional experience includes working with environmental regulatory agencies, environmental and industrial consulting, environmental and process engineering, contaminant fate and transport modeling, and contaminant remedial design and implementation.
Gold Medalist Environmental Engineer from Regional Engineering College, Surat, Gujarat, India seeking an internship or entry-level position
Project Management
Senior Environmental, Social, Community and Communications Professional -- supporting complex international programs and projects with challenging deadlines, technical issues, financing, stakeholder communications and budget constraints.
22 yrs of experience in Govt of India, engineering consultancy firm (An ISO 9001 Company) and has wide exposure from basic engg to detailed engg of multi disciplinary mega projects related to Water and Environmental engineering, Infrastructure, Heavy Industry, Oil & Gas, Urba
Very Serious, Target achiever, and Setting plan, working smartley and fast
1998-2002 University of Cape Coast – Ghana, Bsc. (Hons.) Chemistry, A highly enthusiastic, versatile, dedicated, well-organised and innovative scientist with broad ranging exposure, A highly enthusiastic, versatile, dedicated, well-organised and innovative scientist with broad ranging exposure
Intelligent, highly motivated environmental professional with broad-based skill set.
Qualifications include Masters of Engineering Science (Groundwater Studies) and Bachelor of Environmental Engineering. Could work as environmental engineer covering wide range of fields, or a hydrogeologist, including the geophysical and geochemical aspects of that position.
Electrician worked on locomotives
Sustainable development & enivironmental specialist, hydrogeologist/groundwater modeller
Twenty-five years of experience; recently as Principal/Lead Mechanical Engineer. 5 years in middle/senior management. Specialist of rotating equipments in EPC of pumps, compressors and turbines. Oil & Gas experience includes Refinery, Upstream, Arctic modular plant, Pipeline pump & compressor
I am enrolled in a Water Quality Technology Program. I am nearing the end of my second semester of studies and looking for a temporary position (4-8 Mos.)in a treatment facility to enrich my academic learning. I am available from the beginning of May 2004 - end of August 2004.
Engineering
Broad range of experience in water, wastewater and haz waste treatment. Mangament experience and varied overseas work experience.
M.Phil in Semiconductor Nanostructures.2006-Present, Islamic University, Kushtia, Bangladesh.Master of Science in Electronics and Applied PhysicsBachelor of Science (4 years) in Electronics and Applied Physics,
Sr. Technical Assistant in Soil & Water testing lab atleast `15years experience
Energy Audior/ Engineer
My experience and skills involve: introducing and releasing of new products into the existing manufacturing environment as a Production Engineer; as a Design Engineer worked with automated design application equipment doing debug; entered and corrected microcode for microprocessor design; CAD to ent
Experience with instrumentation, controllers, and computers, in the power, semiconductor, food, paper, petroleum, and chemical industries.
M. Sc. Environmental Technology (specialization in Environmental Engineering) , Wastewater treatment (Aerobic and Anaerobic process), Water disinfections, Air pollution measures and solutions (sound level measurement, air monitoring and air emis
Completing a postgraduate degree in Land reclamation and Restoration, my background is as a scientist with oil and gas exploration and data management experience, with career development into civil engineering land survey in the waste management and construction spheres.
Seeking a position in Geo-Environmental Engineering providing the opportunity to make a strong contribution to organizational goals through continued development of professional skills.
Environmental scientist with MSc in Soil Science. Project and laboratory experience in soils, heavy metals, nutrient management, wastewater and bio solids, and statistical analysis. Strong background in teaching and communication.
Follow up with suppliers for non-capital and capital goods.
Process Control/Instrumentation Engineer with Tolukuma Gold Mines Limited in Papua New Guinea (PNG) I have been employed by Tolukuma Gold Mines for almost 5 years after graduating from PNG University of Technology.I am well vested in my field of speciality.
Working as Assistant Engineer in Distribution company in Hesco /Wapda Pakistan .Expierence in Protection and Testing Of Grid stations 132/11kv and transmission line. Expierence in opration / costruction of 11 kv networks .
Environmental Engineer experience in EIA, GIS, GW modeling, Autocad, Surfer, Photoshop
Junior Environmental Engineer
MS in Civil and Environmental Engineering Experiences: Water/Wastewater Engineering; air pollutant control project Skills: pilot study, mechanical attitude, project management, data analysis, report writing and presentation, various computer software packages
Wind resource analyst with one year experiance
GIS,Automated Mapping and Drafting; Mastering GIS principles and techniques
Protection and Control Engineer -Chief of formation (“TRANSELECT.RICA” S.A National Company, Branch for Maintenance Services of the National Electrical Power Transmission System. Engineer within the “Protection Relays, Automation and Measurement Apparatus” Division – PRAM.
Field Investigation, sample collection, Watershed protection study, Groundwater management, Maps, Cross-section & Report creation
I possess 5 ‘O’ level credits with NTC 2 in Electro mechanical Engineering and a Diploma in Computer Studies(United Kingdom) taking as a correspond candidate at Informatics Computer School and a Diploma in Water Technology taking at Ngee Ann Polytechnics(Singapore). I also possess a Class 2 and 3 Si
Ph.D in the field of Remote Sensing and GIS
I am currently a graduate student at the Univ. of Illinois at Urbana-Champaign in the Env. Engineering Dept. I seek a job that will give me the opportunity to explore the field of env. engineering. One in which I can be active both physically and mentally and that challenges me.
RFID hardware design, end - to end RFID system integration, presales activity
Three year working experince in field of hydrogeology and hydrochemistry.
I am a Chemical Engineer with Seven years of experience. My experience can be divided in to two main categories; industrial and consulting, on air and wastewater, treatment, operation and maintenance encompassing permit applications, work plans for regulatory compliance in the areas of Environment,
1
2
3
4
[ 5 ]
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
Seach Parameters
Change search parameters...
CATEGORIES:
Engineering/Technicians;
INDUSTRIES:
Environmental;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2008 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com