Resume - PhD degree in the field of Industrial Engineering. Experience in the management ...

Misco Jobs

Resume #14438

CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE
July 2004:Process monitoring
Name and address of employer: SAT spa Catania-Italy
Type of business or sector: Research and development
Occupation or position held: Consultant
Main activities and responsibilities: Set up of on-line system for signal analysis and processing. Development of hardware and software platform

July – December 2001: Research staff
Name and address of employer: University of Padova - Italy
Type of business or sector: Research
Occupation or position held: Collaborator
Main activities and responsibilities: Collaborator at University of Padua of research project "MERLOT" for the calibration of 2D and 3D Fem codes for the simulation of thermo-mechanical operation in hot forging processes

EDUCATION AND TRAINING
2002 - today: Attending the 3rd year of Ph.D. course in Industrial Engineering
Name and type of organization providing education and training: Dept. Of Innovation and Management – University of Padua, Italy
Principal subjects/occupational skills covered: Influence of machine tools stiffness in forging processes
Title of qualification awarded: Ph.D. degree

October 1995 – July 2001: Ms.C. degree In Mechanical Engineering
Name and type of organization providing education and training: University of Padua, Italy
Principal subjects/occupational skills covered: Title of Ms.C. thesis: "Numerical and experimental analysis of flowforming process for the production of aluminium car wheels"
Title of qualification awarded: Engineer

PERSONAL SKILLS AND COMPETENCES

MOTHER TONGUE: Italian

OTHER LANGUAGES
English
Reading skills: Excellent
Writing skills: Good
Verbal skills: Good

ORGANIZATIONAL SKILLS AND COMPETENCES
Responsible at University of Padua for the following projects:
–International research project "IMPRESS" (GROWTH) for the experimental and numerical characterization of dynamic behaviour of machine tools during deformation processes,
–National research project "SAT" for the optimization of shearing process using experimental and numerical techniques,

Collaborator at University of Padua for the following research projects:
–Project "TPAPlast" for the monitoring and the optimization of injection moulding process,
–Project "DECOFOR", in collaboration with Tekfor S.p.a., for the characterization of the dynamic behaviour of mechanical and hydraulic presses

COURSES AND EXPERIENCES
2004 September-December: "4th International Training on Precision Forging" at NICHIDAI CO. (Japan) and Osaka University (Japan) for the development of cold forging processes of magnesium and aluminium alloys
May 2004: Permanence at ISKRA (Slo) for the characterization of mechanical press behaviour in cold forging processes
May 2003: Labview® training course for signal analysis and processing
November 2002: "Photostress analysis techniques" course at Luchsinger Co.
May 2002: Permanence at Denmark Technical University for the design of stiffness transducers for the measurement of dynamic press stiffness

TECHNICAL SKILLS AND COMPETENCES

CAD: Programs (AutoCAD, Pro-Engineer, Solid Edge) For 3D Modelling
Fem: Structural Codes (Ansys, Promechanica), Plastic Deformation Processes (Forge2, Forge3), Injection Moulding (Moldflow)
Data Monitoring And Analysis: Labview, Matlab
Graphics: Corel Draw, Macromedia Fireworks
Microsoft: Excel, Access, Front Page, Outlook, Publisher

Co-Supervisor Of 14 M.Sc. Theses Since 2001 At Dept. Of Innovation And Management – University Of Padua

PUBLICATIONS
Bariani P.F., Berti G., Dal Negro T., Ghiotti A., Analysis Of The Dynamic Behaviour Of A Flywheel Screw Press, 7th Ictp Conference 2002 – Yokohama.

Bariani P.F., Ghiotti A., Development Of Loading Devices To Evaluate The Stiffness Of Forging Presses In Realistic Operating Conditions, 6th A.I.Te.M. International Conference 2003 – Cassino.

Bariani P.F., Ghiotti A., Evaluating the press stiffness in realistic operating conditions, 8th ESAFORM Conference, Cluj-Napoca (Ro), 2005 - Accepted

MEMBERSHIP
Member of Associazione Italiana Di Tecnologia Meccanica (Aitem)

INTERSESTS
Running, riding, sailing, reading.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1351 to 1400 of 1527)

Go to Search Parameters...

Brief Description

Proficiency in CAD/CAM software’s: Unigraphics(CAD/CAM), Pro-Engineer, Catia, Solid Edge, Autocad, Product Data Management(PDM), Solid Works, C & C++ programming languages, Ms-Office

M.S in Industrial Engineering & Bachelor's degree in Mechanical Engineering. Key skills include computer-aided design & simulation, customer service & Support, operations management. Permanent Resident in USA (can work for any employer)

EIA/EMP, Research on Environmental Issue

Senior Geologist with 9 years experience in many categories of geology( oil, mining & water ), graduated at May1999 (Geology-Chemistry), Faculty of Science, Cairo University, then high studies at 2001 (Sedimentology), Faculty of Science, Cairo University-Egypt, and high studies at 2004 ( Geophysics,

Environmental Lab Supervisor

I am looking job in Australia, Canada & UK. I have 8 years experience in Administration Department. I can run an organization Individually.

I hold a Bachelor degree in commerce. Beside my sound academic record I have a diploma in business electronics data processing and currently pursuing Masters in Financial Management.

B.Tech (Electrical and Electronics)

7 years of work experiences in Asia, in building and civil construction fields. Expertise in project management and formwork design. Graduated with Master in Civil Engineering (project management) and MBA from top schools in USA and Germany.

Civil Designer/Drafter

Seeking a challenging position in the field of Geology GIS, Remote Sensing, and Image Processing

6 years of Network Administration and Operations Management

Instrumentation technician, control systems engineer, mining technologist

Electronics Communications Engineer

Numerous OSHA certifications, Excellent computer skills

ý•ý Based on my research experience where my main skills are reading and using all new ýinformation and programs in computer filed.ý

Electrical control Engineer

Loyal team player, committed to diversity, strong time management and interpersonal skills, extremely organized with strong leadership ability, self-motivated, impeccable work ethic, and have the ability to work independently.

Lebanese graduate,carrier of 3 degrees, chemist, biomedical scientist & general science

Experience in Electrical Maintenance, Software Development and Teaching.

HSE

PhD degree in the field of Industrial Engineering. Experience in the management of international EU research projects.

Experienced, highly skilled, hands-on professional with superior interpersonal and communication skills seeking a long-term position which will make use of his laboratory, refinery processing and manamgent background.

I completed a B. Tech degree in Environmental Health at Peninsula Technikon. I also completed short courses in Environmental Management, HACCP, and Audiometry. I did my experimental training at the Worcester Municipality, Worcester Abattoir, and Maitland Abattoir.

Experience in handling and Interpretation of Satellite images (LISS and PAN), Working knowledge of ICP-Atomic Emission Spectrometry, Xraydiffractometer (XRD), Handling D GPS(500 Leica) for RTK Survey, Detailed field works carried out in the preparation of Hydrogeomorphology and Structural maps

MSc Applied Geology with specialization in RS and GIS Plus 2 Computer Diplomas of 1 yr duration each.

I have experience in researching well and lease records for petroleum prospect mapping and in well site services/ mud logging.

Registered as Professional Civil engineer 2124-11 in Engineers Australia

Have been employed full time since 1981. First 15 years in the military, specializing in explosive ordinance disposal. Since 1997 been working on middle and higher level Security and Safety management. Have extensive security qualifications and experience and very good Safety and Health experience.

Multilingual (English, French, Arabic and Portuguese), computer skills include Word, Excel and PowerPoint, web research, familiarity with the metals markets both precious and base, ability to multi-task/work under pressure and tight deadlines, widely travelled, writing and speech skills (scientific

Mechanical Engineer (B.Sc. - Istanbul Technical University - ABET accredited university), Strong command of English, Occupational Safety and Health engineer, Pipeline engineer, Member of ASME, National & International work experience, Good communication & social skills, Result oriented work approach

Finish all my subjects of the Career of OIL ENGINEERING, in the Autonomous University Gabriel René Moreno (U.A.G.R.M), counting at the moment with the Title in National Provision, and got the title of Environment Fiscal and Advisor Under norms SO 9000, ISO 14000, OHSAS 1800 SA 8000, and Consultants

B.E(Electrical Power) Engineering, A good skill in production and maintenance of electric transformers and consultant on Quality Management System(ISO 9001)

Experienced mining engineer, mine layout and design, design and scheduling of waste stockpiles, roads and utility planning, drill and blast layouts, scheduling, short term planning and project work

Just graduating with a B.S. in Geology. My degree includes a large portion of field work, including: vibracoring modern sedimentary environments (St. Croix, U.S.V.I); studing deformation of the Cumberland Overthrust; hydrology work. I am a quick learner and hard worker.

Aircraft Maintenance Engineer Mechanical, Certificate IV in Aeroskills, Quality Assurance Inspector, Non-destructive inspector, Vibration analysis, Work in confined spaces, OH&S, Ethics & Fraud, Human factors and maintenance error management, Contamination kit trained, Helicopter Underwater Escape

IT Microsoft Technologies for object-oriented development including VB.Net, C#, ADO.Net, COM, XML, VC++, SQL-Server, Oracle, MS-Access, and Web technologies like ASP.Net, HTML, JavaScript, etc.

HSE Professional with 5+yrs exp with NEBOSH + BSc [Chem]+PG Adv. Diploma in Safety

I HAVE 4 YEARS OF EXPERIENCE FROM THE MILITARY AND 3 YEARS OF EXPERIENCE CONTRACTING IN KUWAIT AS AN ELECTRONICS ENGINEER

uranium processing,ground water analysis,lab operation

HONOURS ENGINEERING DEGREE,ASNT NDT LEVEL-2 in RT,UT,PT,MT,CATIA V5 DESIGNING,JAPANESE LANGUAGE

ASE certified in brakes, steering and suspension. good with computers, scanners, and most things mechanical.

I have both BSc and MSc in environmental sciences and have scientific and commercial experience in this area. My recent work experience with the MOD includes project management along with extensive complex software use. Very keen to get back into the environmental field.

Hands on experience in the dynamics and data types of the Oil & Gas exploration industry. Proven reliability and commitment to getting tasks done under tight time constraints. Good time-management skills with an emphasis on attention to detail to ensure quality of data whilst working to a deadline.

Talented mechanic seeks overseas assignment

A dynamic HSE/ Safety engineer with 10 years of Experience in Oil/Gas and Petrochemical Industries with strong desire for success. B.Tech Chemical Engg graduate, NEBOSH-International Certificate in Occupational Health & Safety, IOSH Certified in Managing Safely in Oil and Gas Industries from UK.

Mine surveyor, several years experience surveying underground and surface

Instruments Technician experienced in electronic and electrical aspects of the instrumentation field.

I Am A Mechanical Engineering Graduate Passed Out In 2004. Right Now I Am Doing My Pg In Computational Engineering. I Know Multiple Softwares Like Ansys, Catia, Pro E, Abaqus, Caesar, CFX, C, C++, AUTO CAD etc.

Mechanical Drafter ( Auto Cad Operator)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 [ 28 ] 29 30 31

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out