Resume - I have 10 years experience in instrumentation and control field. I have designed...

Misco Jobs

Resume #20322

CONTACT INFORMATION:
View contact information...

Instrumentation & Control Engineer Assistant / E. I technologist

SUMMARY OF QUALIFICATIONS
* 10 years experience in electrical & instrumentation control system field
* Designed, setup and commissioned Electrical & Instrumentation control systems
* Maintained and troubleshoot control systems
* Proven abilities to design control systems and to program PLC/DCSs
* Skilled in extensive range of sensors, controllers, transmitters, switches, control valves, interlock systems, motors, pneumatic, hydraulic equipment and other field devices
* Experienced in oil & gas chemical engineering and fine-chemical manufacture engineering
* Analyzed and solved problems under high pressure and tight deadlines
* Proven traits of responsibility, punctuality and honesty
* Demonstrated ability of self learning, logic thinking, analysis and strong problem-solving abilities

PROFESSIONAL EXPERIENCE
Distribute Control System (DCS) & PLC
* Installed, startup, setup, debugged DCS systems (Honeywell TDC3000 AMC, TOSHIBA TOSDIC243D, SUPCON JX300), HMIs, and PLC systems (OMRON CPM1, AB SLC500, SIMENS S-7)
* Programmed, configured DCS, HMI and PLC systems such as system configuration, control points configuration, loop simulation test, Logic control block programming, SOPL programming, sequential control programming and flowchart programming
* Developed and maintained DCS, PLC, HMI's software system reliability, integrity and software backup systems in the event of system failure (ESD emergency shutdown) and upgrading

Field Instrument Control System
* Skilled in different control facilities such as Rosemount, Foxboro, Barton's transmitters, Converters, Fisher control valves, E+H's sensors and flow meters
* Prepared installation details include electrical and pneumatic as well as plant instrument locations, conduit locations, size and installation notes
* Installed, startup, tested and calibrated field control systems such as temperature, flow, pressure, level control systems, packing weight systems, burners, motors, and compressors control systems
* Designed, installed, tested field device control systems and interlock protection systems such as Air compressors, Ammonia compressors, Burners, package and weight systems
* Programmed and configured VFD of motor control systems

System Maintenance
* Carried out daily and periodically maintenance of control systems such as calibrated zero and span of sensors, transmitters, I/P converters, controllers and control valves
* Replaced, wired, setup and tested defective components of PLCs, DCSs, controllers, VFDs and other control equipment
* Provided emergency repair on demand when off duty

Control System Design, Drawing and Diagrams
* Developed control system datasheets, drawn P&ID diagrams and typical loop control diagrams
* Prepared datasheets of field temperature, flow, pressure, level and other field device control systems
* Calculated orifices, control valve parameters
* Issued specifications of control systems
* Programmed flow accumulating systems
* Selected instruments such as sensors, transmitters, control valves, field controllers, analyzers, VFDs
* Designed wiring diagrams for wiring junction boxes, data communication and computer networks

Computer Hardware and Software
* Experienced in PC hardware, software and AutoCAD
* Good at VB/C/VC++/ASP
* Microsoft certified system developer and certified database administrator

Analysis/Design
* Analyzed field device's control demands and designed renovation control systems according to market requirements
* Designed Data Exchange System of Production management and marketing administration

Documentation
* Created technical documents, installation guides, operation and maintenance manuals, failure analysis reports

Organization
* Organized and prioritized multiple job requirements
* Identified tasks to be accomplished
* Motivated others on group projects
* Researched and evaluated renovation projects according to demands of process.

Supervisory and Administrative tasks
* Supervised 50 people in E & I department and took charge of the daily routines
* Reviewed and approved the technical documentation and operation manuals
* Liaised with contractors
* Trained new employees

Communication
* Worked in a team environment dealing with engineers, technicians and administrators

EDUCATION & TRAINING
* Licensed industrial electrician 2004
* AB PLC programming 2003
* OMRON C Series PLC certified programmer 2003
* MCSD/MCDBA 2000
* SUPCON JX-300 DCS Operation/Engineering Configuration 1998
* TOSHIBA TOSDIC243D's hardware & software operation and configuration 1995
* TDC3000 Basic system operation & configuration 1993
* TDC3000 DCS's hardware & software 1993
* Bachelor of Engineering (Process Control & Automation) 1990

WoRK EXPERIENCE
* Co-op student Duffin_Peel Adult School (Canada) 2005-Present
* Field sales Easy-Link Inc. (Canada) 2003-2004
* Technician Dave & Buster's (Canada) 2002-2003
* E.I Technologist/Engineer/Manager Sichuan LUTIANHUA Group (China) 1990-2001

References Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 1515)

Go to Search Parameters...

Brief Description

I’ve experienced in pipeline projects, sewage network system, drinking water network system hydraulics, river water and air quality models and EIA studies, etc.

Over 15 years in Fuels Distribution, Storage and Transfer / Commercial Truck driver

A highly experienced Sr. Chemist with postgraduate qualification in Analytical Chemistry from AMU Aligarh University, India. Possessing 14 years of experience in operation and management of environmental protection, power and desalination plant and R&D laboratories. Expert in analytical technique

My experience is mainly on industrial, oil & gas, petrochemical and infrastructure projects in India and Saudi Arabia. My qualification is a Masters degree in Construction Engineering & Management and i have for over 10 years of experience working on projects with multi-national companies.

Rotating & reciprocating equipment technician

• High financial and numeric ability, establishment of policies and guidelines, playing many strategic roles for Multinational Companies’ Branches in Ecuador, South-America (+15 years)

Experienced Instrumentation and CEMS analyzer tech with 20 plus years . Former nuclear power sub vet. Ten years experience in wastewater and water plants. Also gas turbine experience.

Civil Engineering graduate with over 16yrs of experience in Civil Works (12yrs in Middle East) with a versatile potential to utilize & develop the vast experience gathered in the field of pipelines & infrastructures, dedicated to contribute the best efforts for growth of the company.

I have 10 years experience in instrumentation and control field. I have designed, installed, tested, calibrated, start up, commissioned, maintained and repaired industrial electrical and instrumentation control systems and skilled in PLC, DCS, Programmable drive based control systems.

Systems Engineer - SW HW Server Client Microsoft Linux Unix - networking WAN LAN VPN WLAN routing switching - Physics degree and scientific work in high voltage and superconductivity - 2 years mechanical engineering - relocate to anywhere - fluent English, German, French, some Portuguese (braz.)

Engineering Graduate in Safety and Fire having 3+ Yr Experience. Skills:Risk assessment,Safety Management,Safety Engineering,Hazard Control,Fire Engineering,Design etc

GSM/CDMA Project Manager

Sr. EHS Manager Professional, 20+ years

Experienced Latex and PU Plant Manager

I have skills in project manage ment in: Aviation,Defence Telecommunications, Materiel Maintenance and Logistics.

Mechanical Engineer with experience in Oil, Gas and Industrial air filtration to meet ISA standards

Experienced Engineer, Diverse Background, Mining, Environmental

water and waste water power plant, steam, laboratory, analysis chemical chemist

I am working in an ISP as a Asst. System Admin. Also Computer Hardware Executive. I am Master holer.

Registered Electrical Engineer and trained Quantity Surveyor, able to combine technical knowhow with commercial understanding into Quantity Surveying, Estimating and Sub-contract Administration

IT professional with 7 years of professional experience in diverse roles; varying from software architect, process engineer, project leader and software developer.

A diligent Chemical Engineer committed to hard work. A good team player, highly mobile and willing to be part of a result-oriented team in any part of the world. I am a fast learner, armed with a comprehensive technical understanding in Production/fabrication. I possess excellent communication.

I am a highly qualified, experienced and creative professional seeking a Design/ Drafting Engineer position in your Organization to utilize my excellent skills and passion for challenging work.

Civil/Structural Field Engineer. Construction Management with large EPCM projects

Instrumentation, Automation, control & electrical engineer with 3 years experience

My skills and qualification are exemplary

. I am having vast experience (22 Years) in an integrated industry in construction, Projects & Maintenance and in Diverse fields. I am also suitably qualified (BE (M), ME (PROD), DIP. IN MGMT, PGDIT) for taking up any challenging assignment with a rewarding career anywhere in the Globe using the mos

PLC/FPGA Process Controls Electrical Engineer Allen bradley and Siemens architecture proficent with Control Logix Design Experience.

Junior geologist with one plus year of experience including but not limited to geologic mapping, core and chip logging, soil sampling, drill logistics, and ARCGIS familiarity.

I have completed my graduation with microbiology subject and also completed my laboratory technician course from government hospital.

Peter is a highly experienced environmental engineer with significant expertise in oil, gas and mining, regulatory issues, sustainable development, corporate social responsibility and policy development. He is a Chartered Engineer (CEng, MICE), and an Environmental Professional (CEnv, MIEMA)

3 decades of environmental, health and safety experience in the private and government sectors

NPDES Inspector/Trainer / EPD&EPA Permitting / Site Inspections / EIS / EIA

Proven problem solver with various experiences relating to offshore/marine and onshore oil and gas operations. Over 35 years experience with a major operating company and contract operating company in Gulf Coast oil and gas production operations; possessing strong interpersonal/communication skills

PhD (Geology), Post MSc Diploma (Hydrogeology), MSc (Applied Geology). Working as GIS Professional and previously worked as Geologist, Lecturer in Environmental Science and GIS Professional.

GIS Expert (Esri & Geomedia)

multilingual engineer with significant experience in geographic information system, able to manage from technical components even administrative components, concentrate in the range of prevention, diagnostic, planning, design, assembly, administration and treatment in air, soil, water and territory

Information Technologies, Windows2000, XP. English, Russian, Turkish

Sound skills on QHSSE matter and Solid knowledge of Chemicals Engineering and wide experience in processing of crude oil and raw sour gas processing (oil stabilisation, gas sweetening and dehydration, liquid-liquid and gas liquid separation).

German Language Malay Student

A position with a construction company which requires skills in field engineering, cost controlling, planning, scheduling, and estimating

CAD drafter

Bachelors Degree in CHEMICAL ENGINEERING with Masters in BUSINESS ADMINISTRATION. Cumulative work experience of 8+ years in Hydro metallurgical Zinc manufacturing company.

I have a Bachelors degree in Geology, and have completed a field geology course that gives me valuable field experience.

Laboratory Analysis, Administration, Safety

CIVIL ENGINEERING; LAND SURVEYING; COMPUTER AIDED DRAFTING (CAD)

ms project,autoCad 2008(2d,Isometric,3d modeling),B.Eng in Metallurgical and Materials Engineering,Planning,cost estimating and control,job schedulling,WBS,manpower and site mobilization,EVA,S-curves,Risk management,Project Evaluation

Instrumentation I&C DCS Technician

M.Sc Environmental Biotechnology (1 yr), Bachelors in Fisheries Science (4 yrs), holding ISO-14001 & Occupational Helath and Safety Assesment Series training certificate.

A chartered marine technologist with a broad cross discipline outlook with particular experience in the legislative, quality and risk management aspects of the upstream oil and gas industry.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out