Resume - Graduated 09/2004 in Master of Science (Mechanical Engineering) from The Univers...

Misco Jobs

Resume #20887

CONTACT INFORMATION:
View contact information...

OBJECTIVE: To seek the post of Design Engineer or Mechanical Engineer. To be involved in optimizing designs of machines or systems for optimum performance. To contribute significantly to the growth and profitability of a dynamic organisation that is constantly innovating and pushing the envelope.

HIGHLIGHTS OF QUALIFICATIONS
* Graduated in September 2004 from The University at Buffalo (UB), The State University of New York with a Master of Science in Mechanical Engineering.
* Completed a thesis at UB in decentralization of the design of complex systems.
* Eight years experience in facilities management at the 800,000 m2 floor area campus of the National University of Singapore (NUS).
* Strong project management and research skills.
* Wrote nine articles for Singapore's top english daily, The Straits Times.
* Active in outdoor activities and community service.

RELEVANT SKILLS AND ACCOMPLISHMENT
MS coursework
* Optimization in Engineering Design
* Heuristic Optimization
* CAD applications
* Composite Materials
* Graphics in CAD
* Cryogenic Process Engineering
* Engineering Procedure Writing
* Technical Communications for Engineers

Optimization of Engineering systems
* Used Method of Feasible Directions, Sequential Linear Programming, and Sequential Quadratic Programming to optimize design of a water reservoir system [UB].
* Employed Genetic Algorithms to study decentralized optimization of complex systems for MS thesis. Details at http://home.eol.ca/~jochebel/new_page_2.htm.
* Used Genetic Algorithms to optimize design of a Joule-Thomson cryogenic cooler [UB].
* Used Simulated Annealing, Random Search, and Enumerative Search to optimize design of water distribution network [UB]. Details at http://home.eol.ca/~jochebel/new_page_3.htm.
* Applied MS Excel's optimization software, Solver, in problem solving [UB].

Computer Skills/Knowledge
* Extensive C and Fortran programming experience [UB].
* Simulated the driver's view of a futuristic vehicle using OpenGL and C [UB].
* Used X-Windows and C to write a rudimentary CAD software [UB].
* Modeled the operation of a 1.5 million gallon water reservoir using MS Excel [NUS]. Details at http://home.eol.ca/~jochebel/new_page_4.htm.
* Used the software PROMAL to conduct stress and strain analysis on composite materials [UB].
* Used ProE to analyze the vulnerability of the Golden Gate Bridge to a terrorist explosion [UB].
* Used ProMechanica and ProE to analyze the motion of a crank rocker [UB].
* Used ProE to conduct static stress analysis of a 3D cantilever beam [UB].
* Applied AutoCAD Release 13 to draw the water pipes layout on a pre-existing AutoCAD drawing of the NUS campus [NUS].

Project Management
* Worked with consultants to plan the replacement of a 1.5 million gallon water reservoir costing US $2.9 million [NUS].
* Coordinated with consultant, contractors, and stakeholders to replace the NUS' fire protection system costing US $9 million.
* Wrote, tendered, awarded, and monitored onsite the contract for laying 3 miles of 12 inch diameter water pipes costing US $0.9 million [NUS].

Supervision/Teamwork
* Revamped a 30-man maintenance team to create a flatter hierarchy; reduce response time to customer's request; and increase staff accountability and skills range [NUS].
* Interviewed, hired, and developed staff in frontline maintenance of plumbing and sanitary systems, and fire protection systems [NUS].
* Worked with consultants and contractors in upgrading of existing office space [NUS].
* Collaborated with fellow UB students in project work.

Technical Communications
* Wrote level one, two, and three ISO 9000 manual for a fictitious automobile company [UB].
* Wrote the proposal to replace an ageing water reservoir in a university campus [UB].
* Conducted research and made a presentation to fellow students on the application of ISO 14000 in the workplace [UB].

Community Service/Activities
* Prepared breakfast for homeless people in a soup kitchen in church-based "Out-of-the–Cold" program (Toronto, Canada January 2004).
* Spent a day helping to construct a house for Habitat for Humanity at Fort Erie, Canada (Summer 2003).
* Acquired Wilderness First Aid certification at UB (Fall 2002).
* Member, South Niagara Adult Rowing League, Welland, Canada (Spring 2002).
* Volunteered three months onboard a humanitarian aid vessel, MV Doulos, and worked in the ship's bookstore (1992-1993).
* Attended 24-day Outward Bound program in New Zealand (1990).

EMPLOYMENT HISTORY
03/2003 – 09/2004 Part-time Translator Citizenship & Immigration Canada, Canada
12/2002 – 09/2004 Part-time Tutor Self-employed, Canada
03/1993 – 05/2001 Facilities Manager National University of Singapore, Singapore
11/1992 – 02/1993 Volunteer Operation Mobilisation, Singapore
02/1992 – 10/1992 Free-lance writer Self-employed, Singapore
02/1991 – 01/1992 Research Officer Ministry of Defense, Singapore
07/1989 – 11/1990 Engineer Public Utilities Board, Singapore

EDUCATION
* Master of Science (September 2004), Mechanical Engineering, The University at Buffalo, The State University of New York, Buffalo, New York, US. GPA: 3.523/4.0.
* Bachelor of Engineering (June 1988), Mechanical Engineering, The National University of Singapore, Singapore.

NOTES/OTHER INFORMATION
Willing to travel or relocate. References available on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 1513)

Go to Search Parameters...

Brief Description

Management , strategic management , marketing +EXPERIENCED PAINTER !!!

IT & Technical Facility Project Manager, Systems / Application Design, Development, Deployment, and Integration Manager - Data Centers, Contact/Call Centers, Hospitals, Renewable Energy Sources and Systems, "Green" Engineering/Construction, Clean Energy Technology, Energy Managment Systems / BAS

Bachelor of Science Degree in Geology . Academic and professional experience performing site assessments. Field experience as well as processing the data back in the lab. Proficient in Microsoft Office. Bilingual

M.S. Geologist. Experience with Geometrics 24-Channel Seismic Refraction/Reflection, Sensors & Software PulseEKKO 100 GPR, Campus Imager 50 Resistivity, Geometrics Proton Precession/Cesium Vapor Magnetometers, Geonics EM31/34, acquisition and analysis. Forward/Inverse model spreadsheet development.

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

GIS Analyst

B.E CHEMICAL with 2 yrs experience in Project

Detail oriented Instrument and Controls technician seeking international opportunities

Established track record with 6 years of experience in helping organizations to efficiently use their networks; ensuring that the design of an organization's computer site allows all of the components, including computers, the network, and software, to fit together and work properly.

Technical Writer/ Instructional Designer

Seeking career prospects in metallurgical processing, mineral resources (ferrous metals, base metals, precious and rare metals), process improvement and optimization, research and development, project management, process-business analysis, technology policy and resources assessments

Industrial electrician

Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department

Sdw

BEng Hons., Naval Architecture & Ocean Engineering, University of Glasgow, Scotland

Occupational Health Safety & Environmental Practitioner, Post Gruate Cert. in OHS&E Management

A Dedicated Occupational Health & Safety Professional and Certified Safety Trainer

12 years experience in instrumentation mining processing plant.holder of a craft certifitecate in process control instrumentation.

4.5-years experience - project management, construction economics, control, contractual compliance, AutoCAD, 4-D scheduling, cost estimation, risk analysis and probabilistic modeling, technology consulting, work breakdown structures, project financial analysis.

Chemical/Natural Gas Engineer

Education: M. Sc., Chemistry, Specialisation: Heterogeneous Catalysis; Work experience (current occupation), Researcher, Subject: Preparation supported metal catalysts, Goal: Development self-invented technique; International experience: Manager & windsurf instructor, Aruba, Dutch Antilles

A graduate of a degree in Bachelor of Science in Chemistry and having passed the Licensure exam for Chemists given by the Professional Regulatory Commission. Have five-year meaningful experience in Analytical Chemistry.

HSE ENGINEER AND SUPERVISOR

Doctorate of Chiropractic Medicine, B.S. Anatomy & Physiology, B.S. Health & Wellness w/ toxicology minor, 112 of 120 hrs towards B.S. Biology/Analytical Chemistry Degree

Graduated 09/2004 in Master of Science (Mechanical Engineering) from The University at Buffalo, The State University of New York. Emphasis: Design Optimization. 8 years experience in facilities management (water, fire protection). Extensive experience in South and South East Asia.

Livelink Administrator, Causeway Collboration Administrator

Geologist - Planning - Production - Development - Drilling - etc.

Maintenance Technician

Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.

Marine Geologist with experience in Bathymetric, Oceanographic, Geophysical and Geotechnical Data Processing and QA/QC. Proficient in MicroStation, uSMART and InRoads mapping softwares.

I have the qualifications and experience you are seeking. I am certified as a Journeyman Refrigeration Mechanic, Journeyman Electrician, and Controls Technician. My experience includes over 17 years in construction and service of mechanical systems.

Seven years of hands on mining experience in surface and underground mining of rock salt, silica sand, high alumina clay (fire clay), and limestone

Supply Chain and Procurement Professional with international oil and gas project experience!

cnc edm machinist over 8 years of experience

geological,geotechnical and hydroegeologiacl investigations

Rangeland Ecology and Management Degree

Objective: To gain professional experience and apply my knowledge on the IT and Telecommunication

Diploma in computer engineering from state board of punjab

Mining Engineer, Quarry Engineer/manager, Explosives engineer, site superintendent for explosives plant

Environmental Geological Scientist

Technical Writer / Editor and Proposal Writer

More than one-year experience in the oil and gas fields (exploration and production) as a wellsite geologist on many rig sites in Oman. I have a good practical and theoretical knowledge of the geological settings of Oman, preliminary geological analysis, wellsite logs (LWD, MWD, and Wireline)...

Exp. in nitrogen,snubbing, workover,and also have class A CDL w/ tanker endorsement

Five-year experience in metallurgical projects from the Gold and Nickel industry. Two-year plant and pilot plant experience. Speak, read and write English and Chinese (Mandarin). Familiar with pressure leaching at high temperature.

Working in the Safety and Environmental for the Manufacturing, Oil and Gas and the Wind Industry

Electronics and Communications Engineer, AutoCAD Operator, Network Administrator

Project Manager, Civil, Geotechnical, Offshore, Engineer, Mining, Oil & Gas, Pipeline

Strong knowledge in Computer

Having 11 years experience in electronic, electrical and mechanical system and instrument related breakdowns, up gradation and project work as a technician. Recently get Australian Permanent residential visa on 3 rd Feb 2008.

Bachelors of Science in Chemistry minor in Hydrogeology

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out