Resume - Experienced Engineer, Diverse Background, Mining, Environmental

Misco Jobs

Resume #22786

CONTACT INFORMATION:
View contact information...

OBJECTIVE
* Career position where I can utilize my engineering skills and business experience to develop efficiency in a professional organization.

EDUCATION and PROFESSIONAL QUALIFICATION
* Bachelor of Science in Mining Engineering, December, 1980, University of Pittsburgh, Pittsburgh, Pennsylvania
* Registered as Engineer-In-Training, Commonwealth of Pennsylvania

PROFESSIONAL EXPERIENCE
* September, 2004 to Present: Waste Management, Suburban Landfill, Inc., Glenford, OH. Employed as Landfill Engineer. I am responsible for engineering for three (3) sanitary landfills in the southeast Ohio area. Duties include: Project management, environmental oversight, budget preparation and management. I have overseen two (2) cell construction projects and storm water management. I administer bid documentation and specifications. I assist site personnel in Landfill Gas Systems, Leachate Management Systems, and Water Protection Systems.
* April, 2004 to September, 2004: Self Employed. Assist engineering consulting firms with special projects, mainly in mining, earth moving, and environmental fields. I have a Hobby Business of outdoor woodworking projects. I also assist my wife with her home interior sales business.
* October, 1988 to April, 2004: Murray Energy Corporation. I have held several positions for these companies under the same ownership. During this period, annual production increased from 2.2 Million tons in 1988 to over 23 million tons in 2003. Each position change represents a promotion.
October, 1995 to April, 2004: Maple Creek Mining, Inc., Bentleyville, PA. Employed as Chief Engineer. I was responsible for all engineering to operate two (2) bituminous deep mines, a coal preparation plant, three fine coal slurry ponds, two coarse refuse disposal areas, and several support facilities. This work included; overall mine design; compliance with federal, state and local rules, regulations and policies; environmental oversight; and development of annual operating budgets. During this period, I also served as a member of the board of directors for the Pennsylvania Coal Association.
March, 1994 to October, 1995: The Ohio Valley Coal Company, Alledonia, OH. Employed as Senior Project Engineer: During this period I worked on business development and acquisitions. I performed business evaluations of potential mine acquisitions and conducted Phase I environmental audits of the liabilities associated with the acquisitions.
February, 1992 to March, 1994: Oneida Coal Company, Inc., Sutton, WV. Employed as Chief Engineer for this operations that included eleven (11) small bituminous deep mines, three (3) surface contour strip mines, two (2) coal preparation plants, two (2) rail loadout facilities and three (3) refuse disposal areas.
March, 1990 to February, 1992: The Ohio Valley Coal Company, Alledonia, OH. I was employed as Mining Engineer. Duties included preparation of air pollution and environmental permits for the Ohio Valley Coal Company and its related companies. I assisted in the development of acquisition properties.
October, 1988 to March, 1990: Energy Resources, Inc., Brockway, PA. I was employed as a Mining Engineer for this bituminous surface mine operation that included twenty two (22) active surface mine operations, two (2) coal crushing and screening operations, and two (2) rail loadout facilities. I was responsible for all permit activities and environmental compliance.
* 1988: Power, Inc., Osceola Mills, PA. I was employed as an Operator/Supervisor of a heavy media coal preparation plant that used a unique fine coal recovery system developed in Belgium. During this period, I worked with an international work force to maximize efficiency of this fine coal system.
* 1987: Skelly and Loy, Clearfield, PA. I was employed as a Mining Engineer for this engineering consulting firm. My primary responsibilities included preparation of surface mine permits for various clients.
* 1984-1986: First Century, Corp., Mildred, PA. I was employed as a Mining Engineer for this Semi-Anthracite surface mine operation. This operation included three (3) active surface mines and a heavy media preparation plant.
* 1983: The Oasis Tavern, Inc., Philipsburg, PA. I was a managing partner of this tavern/restaurant operation.
* 1977-1982: Barnes and Tucker Company, Barnesboro, PA. I was employed as a Mining Engineer from 1981 through 1982. My responsibilities included mine design and preparation of ventilation and roof control plans. I was also responsible for environmental and quality control. Prior to graduation from college, I worked as an hourly worker in the underground mines during off semesters.

OTHER SKILLS AND QUALIFICATIONS
* Strong computer skills including proficiency in Microsoft Word, Microsoft Excel, Word Perfect, Lotus 123, AutoCAD, SurvCADD and other programs.
* Strong Organizational Skills
* Supervisory Experience of both Technical and Hourly Employees

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 1515)

Go to Search Parameters...

Brief Description

I’ve experienced in pipeline projects, sewage network system, drinking water network system hydraulics, river water and air quality models and EIA studies, etc.

Over 15 years in Fuels Distribution, Storage and Transfer / Commercial Truck driver

A highly experienced Sr. Chemist with postgraduate qualification in Analytical Chemistry from AMU Aligarh University, India. Possessing 14 years of experience in operation and management of environmental protection, power and desalination plant and R&D laboratories. Expert in analytical technique

My experience is mainly on industrial, oil & gas, petrochemical and infrastructure projects in India and Saudi Arabia. My qualification is a Masters degree in Construction Engineering & Management and i have for over 10 years of experience working on projects with multi-national companies.

Rotating & reciprocating equipment technician

• High financial and numeric ability, establishment of policies and guidelines, playing many strategic roles for Multinational Companies’ Branches in Ecuador, South-America (+15 years)

Experienced Instrumentation and CEMS analyzer tech with 20 plus years . Former nuclear power sub vet. Ten years experience in wastewater and water plants. Also gas turbine experience.

Civil Engineering graduate with over 16yrs of experience in Civil Works (12yrs in Middle East) with a versatile potential to utilize & develop the vast experience gathered in the field of pipelines & infrastructures, dedicated to contribute the best efforts for growth of the company.

I have 10 years experience in instrumentation and control field. I have designed, installed, tested, calibrated, start up, commissioned, maintained and repaired industrial electrical and instrumentation control systems and skilled in PLC, DCS, Programmable drive based control systems.

Systems Engineer - SW HW Server Client Microsoft Linux Unix - networking WAN LAN VPN WLAN routing switching - Physics degree and scientific work in high voltage and superconductivity - 2 years mechanical engineering - relocate to anywhere - fluent English, German, French, some Portuguese (braz.)

Engineering Graduate in Safety and Fire having 3+ Yr Experience. Skills:Risk assessment,Safety Management,Safety Engineering,Hazard Control,Fire Engineering,Design etc

GSM/CDMA Project Manager

Sr. EHS Manager Professional, 20+ years

Experienced Latex and PU Plant Manager

I have skills in project manage ment in: Aviation,Defence Telecommunications, Materiel Maintenance and Logistics.

Mechanical Engineer with experience in Oil, Gas and Industrial air filtration to meet ISA standards

Experienced Engineer, Diverse Background, Mining, Environmental

water and waste water power plant, steam, laboratory, analysis chemical chemist

I am working in an ISP as a Asst. System Admin. Also Computer Hardware Executive. I am Master holer.

Registered Electrical Engineer and trained Quantity Surveyor, able to combine technical knowhow with commercial understanding into Quantity Surveying, Estimating and Sub-contract Administration

IT professional with 7 years of professional experience in diverse roles; varying from software architect, process engineer, project leader and software developer.

A diligent Chemical Engineer committed to hard work. A good team player, highly mobile and willing to be part of a result-oriented team in any part of the world. I am a fast learner, armed with a comprehensive technical understanding in Production/fabrication. I possess excellent communication.

I am a highly qualified, experienced and creative professional seeking a Design/ Drafting Engineer position in your Organization to utilize my excellent skills and passion for challenging work.

Civil/Structural Field Engineer. Construction Management with large EPCM projects

Instrumentation, Automation, control & electrical engineer with 3 years experience

My skills and qualification are exemplary

. I am having vast experience (22 Years) in an integrated industry in construction, Projects & Maintenance and in Diverse fields. I am also suitably qualified (BE (M), ME (PROD), DIP. IN MGMT, PGDIT) for taking up any challenging assignment with a rewarding career anywhere in the Globe using the mos

PLC/FPGA Process Controls Electrical Engineer Allen bradley and Siemens architecture proficent with Control Logix Design Experience.

Junior geologist with one plus year of experience including but not limited to geologic mapping, core and chip logging, soil sampling, drill logistics, and ARCGIS familiarity.

I have completed my graduation with microbiology subject and also completed my laboratory technician course from government hospital.

Peter is a highly experienced environmental engineer with significant expertise in oil, gas and mining, regulatory issues, sustainable development, corporate social responsibility and policy development. He is a Chartered Engineer (CEng, MICE), and an Environmental Professional (CEnv, MIEMA)

3 decades of environmental, health and safety experience in the private and government sectors

NPDES Inspector/Trainer / EPD&EPA Permitting / Site Inspections / EIS / EIA

Proven problem solver with various experiences relating to offshore/marine and onshore oil and gas operations. Over 35 years experience with a major operating company and contract operating company in Gulf Coast oil and gas production operations; possessing strong interpersonal/communication skills

PhD (Geology), Post MSc Diploma (Hydrogeology), MSc (Applied Geology). Working as GIS Professional and previously worked as Geologist, Lecturer in Environmental Science and GIS Professional.

GIS Expert (Esri & Geomedia)

multilingual engineer with significant experience in geographic information system, able to manage from technical components even administrative components, concentrate in the range of prevention, diagnostic, planning, design, assembly, administration and treatment in air, soil, water and territory

Information Technologies, Windows2000, XP. English, Russian, Turkish

Sound skills on QHSSE matter and Solid knowledge of Chemicals Engineering and wide experience in processing of crude oil and raw sour gas processing (oil stabilisation, gas sweetening and dehydration, liquid-liquid and gas liquid separation).

German Language Malay Student

A position with a construction company which requires skills in field engineering, cost controlling, planning, scheduling, and estimating

CAD drafter

Bachelors Degree in CHEMICAL ENGINEERING with Masters in BUSINESS ADMINISTRATION. Cumulative work experience of 8+ years in Hydro metallurgical Zinc manufacturing company.

I have a Bachelors degree in Geology, and have completed a field geology course that gives me valuable field experience.

Laboratory Analysis, Administration, Safety

CIVIL ENGINEERING; LAND SURVEYING; COMPUTER AIDED DRAFTING (CAD)

ms project,autoCad 2008(2d,Isometric,3d modeling),B.Eng in Metallurgical and Materials Engineering,Planning,cost estimating and control,job schedulling,WBS,manpower and site mobilization,EVA,S-curves,Risk management,Project Evaluation

Instrumentation I&C DCS Technician

M.Sc Environmental Biotechnology (1 yr), Bachelors in Fisheries Science (4 yrs), holding ISO-14001 & Occupational Helath and Safety Assesment Series training certificate.

A chartered marine technologist with a broad cross discipline outlook with particular experience in the legislative, quality and risk management aspects of the upstream oil and gas industry.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out