Resume - A qualified chemical/environmental engineer looking for a challenging position i...

Misco Jobs

Resume #2382

CONTACT INFORMATION:
View contact information...

EDUCATION
BACHELOR OF ENGINEERING SCIENCE (2002)
University of Western Ontario
Major: Chemical Engineering

DESIGN PROJECT
2nd Place Winner at 2002 CSChE Conference in Vancouver, B.C.
Design Thesis: Development of methanol as an environmentally benign fuel for use in Polymer Electrolyte Membrane Fuel Cells
Details:
* Feed purification for the removal of light hydrocarbons from vacuum tower bottoms for the production of pure asphaltenes
* Gasification of asphaltenes in an entrained bed gasifier to create synthesis gas
* Conversion of synthesis gas into methanol using a Copper-based catalyst in a slurry bubble column reactor

RELEVENT EMPLOYMENT EXPERIENCE
CHURCH & TROUGHT INC., North York, ON
Engineer, April 2002 to Present
* Assessed compliance and prepared applications for facilities applying for Site-wide and Comprehensive Certificates of Approval (Air)
* Performed dispersion modeling calculations to estimate facility's maximum Point-of-Impingement (POI) concentration off-property
* Estimated and reported releases to air, water and land for facilities submitting to the National Pollution Release Inventory (NPRI)
* Performed testing for both contaminant and odour emissions at client facilities
* Prepared cost proposals for potential clients
* Designed a database in MS Access that would generate a facility's emissions estimates based on production and usage data entered by the client
SUNOCO INC., Sarnia, ON
Environmental Engineering Intern, May 2000 to August 2001
* Assisted environmental compliance manager in maintaining government regulated land, air and water pollution standards within the refinery
* Prepared quarterly water data reports for the Municipal and Industrial Society for Abatement (MISA)
* Assisted in the preparation of annual National Pollution Release Inventory (NPRI) reports
* Monitored refinery for fugitive emissions
* Calculated and reported annual results for leak detection and repair program
* Programmed an interactive online form using Visual Basic that was implemented into the refinery-wide Management of Change program

DATA ACCESS TECHNOLOGIES INC., Newmarket, ON
Office Assistant, May 1998 to August 1998
* Assisted computer technician with installing off-site computer networks (up to 100 workstations)
* Assembled personal computers and installed required software
* Maintained accounts payable and receivable
* Assisted office manager in performing all reception and office management duties

SPECIAL SKILLS AND ACTIVITIES
* W.E.S.T. (Women in Engineering Science & Technology)
o Member, September 1999 to Present
* CSChE (Canadian Society of Chemical Engineers)
o Student member, September 1998 to Present
* Sunoco United Way Campaign o Volunteer, September 2000 to December 2000
* Devine Street School Breakfast Club o Volunteer, January 2001 to April 2001
* London Humane Society o Volunteer, September 1997 to May 1999

REFERENCES
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 501 to 550 of 1622)

Go to Search Parameters...

Brief Description

Application for the suitable post in Maintenance.

Strategic marketing, business development and executive search professional with strong record of implementing sales and strategic plans that support corporate and financial goals. An effective executive search director & professional.

Industrial Hygiene/Product Safety Specialist

Mechanical?Electrical Engineer,Steel Expert,Steel Plant operation Incharge Marketing & Sales Incharge ,QMS,EMS.OHSAS Regd Lead Auditor,MBA9Business Admin.Professional Doctorate in Environmental Management.,Handled Projects as well as Maintenance,Director,European Quality Body,Managing Directoer Asia

Several Years experience as drafter, on board last 15 on AutoCAD

on hydrologic and hydraulic analysis of waste water systems, analysis and rehabilitation of sewer systems, storm water management techniques, site planning, road designs, storm drain systems, erosion and sediment control techniques, cost estimations, Civil3D, AutoCAD, Hydraflow

I'm a certified GE six sigma black belt and my expertise is on quality processes. I also have a good understanding of printed wiring assemblies design and testing. I look forward for a challenging and rewarding career in these areas.

I majored in Geosciences- Environmental Science track, I graduate this summer. Currently attend only one evening class which allows me to be employed full time.

I have 6 years of experience in Env. Engineering. I've worked on many projects and I gained experience on hydraulic calculations, planning and digital preparation of stormwater and sewerage application projects, design of discharge structures, performing the simulation models of sewer systems.

I WOULD LIKE TO BE SELECTED AS HSE SPECIALIST / MANAGER. I HAVE 6 YEARS EXPERINECE ON CHEMICAL PLANTS.

A thorough and hard-working Environmental Scientist with over five years of environmental experience, including groundwater related issues, contaminated site assessments and remediation.

Searching For A Suitable Position In Food Industry

HSE officer with 6yrs of exp. having Nebosh, Iosh, Osha etc.

Working as Senior Project Engineer in Ontario, Canada with a firm, which specializes in the design of municipal infrastructure, roads and water resource management.

Six Sigma green belt in manufacturing sector having 6 years of experience,B.E. in electrical and eectronics engineering

Radiation Safety Officer, Certified Health Physicist, Environmental Manager

Mining/Mechanical Engineer with 5+ years experience, with a background in Environmental Engineering seeking employment.

I recently graduated from the University of Minnesota with a B.S. in Geology. I have little experience, but I did work as a research assistant for a professor, Dr. Christian Tessier and have done six weeks of field work.

A qualified chemical/environmental engineer looking for a challenging position in the field environmental reporting, pollution control or alternative energy.

MSc in Environmental Engineering from University of Nottingham, UK

Piping Designer with Over 20 years experience within the Oil and Gas, Petro Chemical, Refinery, Textile, Pharmaceutical and Nuclear Waste Industries

Young academically accomplished geotechnical engineer, practical experience in the mining industry both domestic and overseas.

Experienced hydrogeologist and groundwater modeler with PHD from USA and work experience in USA, Europe, and the Middle East

I am Arunraj, N.S., completed PhD at Indian Institute of Technology Kharagpur, India. My doctoral dissertation is entitled “Modeling risk and Risk Based Maintenance (RBM) in Chemical Industry”.

Masersdegree in Env. Geology, thesis in groundwater contamination, 3 yrs total of environmental consulting type work

I have a B.Sc. (Hons) in Geology from Carleton University, and diplomas as a Mineral Engineering Technologist and as a Geological Technician from Sir Sanford Fleming School of Natural Resources. I am currently seeking full time employment within the Environmental/Earth Sciences sectors.

Recent college graduate seeks to apply practical and formal training in mechanical engineering to begin career in design, manufacturing, technical sales, or training.

Environmental/Civil Engineering; Consulting, Regulatory and Research experience with a focus on Water Resources and Remediation.

Objective: An entry-level environmental position, with projects in water quality, asbestos remediation, fate-transport analysis, and similar geohydrology issues.

Chemist, Research Chemist, Analytical ChemistCtechnical support

Chartered Electrical Engineer and Member of the Institution of Engineering & Technology (IET).

PROJECT GEOLOGIST with 19 years experience in Environmental Consulting including soil and groundwater investigations and site remediation, and Oil and Gas Exploration.

Expertise in Environmental Monitoring, Compliance and Assessment issues.

• Having two years of experience in engineering consultancy. Have a vision to quickly identify and understand the business benefits of new technologies. • Strong computational, analytical problem solving, and design skills.

I am civil engineer, Msc with 2 years of experience. My topics are hydrology and groundwater modeling. Excelent knowledge in GIS, Excel, Word, Visual Basic, Matlab, Photoshop and Dreamweaver.

Graduate Engineer with 1.5 years professional experience. Degree in Civil Engineering. Masters Degree in Water & Environmental Engineering.

LSIT, US Citizen, Willing to relocate

HSE-Process Safety Manager/Specialist with wide experience of petrochemicals HSE management, PSM (Process Safety Management) including Permit to Work, Accident Investigation, etc., Environmental Management System/ISO 14001 implementation, Capital Projects Safety, Environment, and Fire protection

Hardware systems engineer (Electrical Engineering, Hardware Design, Hardware/Software Testing, Hardware/Software Troubleshooting)

Senior-level Turbine Specialist/Technician eager to contribute comprehensive mechanical acumen as well as dynamic supervisory, safety management, and troubleshooting talents toward actively supporting a progressive organization in optimizing results.

I am a Materials and Process Metallurgist,, and a Plant Metallurgist ,who have seven years experience in both gold and materials processing in Ghana.

Mechanical Engineer with five years extensive expereience in the field of maintenance for a process plants and a hard core production plant.

I have done Masters in Environment Sciences. I have 2 years of experience. I am doing Certificate in GIS programm in Hunter College, City University of NEWYORK.

MS Chemical Engineer With R&D Experience

Environmental Engineer, M.S., E.I.T. (Water and Wastewater)

Chemical Engineering graduate with extensive experience in silicate manufacturing, pulp&paper manufacturing and design of wastewater treatment facility components with strong interpersonal skills

Keen interest in positions in the Environment, Sustainable Development and HSE sectors; dynamic and flexible with good problem solving skills, excellent communication and team working skills, achievement oriented with a strong academic record and international experience.

Accomplished professional leveraging strengths in hydrogeology, geology, geomatics and geotechnical engineering to earn a position on a team committed to making genuine social contributions within challenging, multifaceted environments. Possess an MS in Geology and an MS in Hydrology / Hydrogeology;

Personal skills that include creative project design, assembly and testing Hand on test lab experience in organic and Inorganic chemicals.

Structural Design, Stress Analysis, FE Analysis (Nastran / Patran, ANSYS 11.0) and Hand Calculations in MathCAD (Ref: Roark’s, API, ASME B31.3 and DNV)

1 2 3 4 5 6 7 8 9 10 [ 11 ] 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out