Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #34605 next resume »»
CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
Environmental Engineer/Scientist with over thirty years of experience with project and program management, industrial hygiene, hazardous waste and material management, modeling, monitoring, regulations, risk and technology assessment, pollution control, and environmental remediation

OBJECTIVE:
To use my 33 years of experience with hazardous waste management, site remediation, monitoring, modeling, pollution control, risk assessment, air toxics, permits, environmental regulations, and project management to facilitate cost-effective solutions to environmental problems.

WORK EXPERIENCE:
1994-Present, Cornett Environmental Consulting, Ohio and Virginia CONSULTANT

Provide site investigations, strategic planning, monitoring, modeling, pollution control, risk assessment, regulatory compliance, permit applications, and health and safety programs; evaluate pollution prevention, waste minimization, emergency response, process safety, and site clean-up and closure programs; and coordinate related projects with attorneys and industrial, commercial, and public interest organizations. Coordinate Collinwood Environmental Taskforce.

1992-1994 META, Gaithersburg, MD Senior Environmental Scientist

Principal investigator responsible for baseline and cumulative human health impact assessment for a programmatic environmental impact statement for the U.S. Department of Energy Environmental Restoration and Waste Management Programs. Wrote risk assessment software and evaluated risks posed by DOE installations. Wrote sections of environmental impact statements and associated implementation plans. Evaluated risk assessment, risk communication and waste management methods. Summarized regulations and risk management guidelines. Evaluated waste management and remedial action alternatives. Provided and evaluated emission factors. Drafted technical directives for DOE National Labs and contractors. Evaluated and wrote work plans and proposals. Reviewed technical reports and draft EIS text. Participated in and summarized meetings. Reviewed waste management technology and associated pollution control systems. Identified and recruited experts to help with project. Provided expert testimony in related hearings and litigation.

1987-1992 Resource Applications, Inc., Burke, VA Senior Environmental
Engineer / Manager

Project manager for remedial investigations, feasibility studies and environmental compliance audits at Superfund sites contaminated with herbicides, halogenated solvents, PCBs, oil, fuel, heavy metals, dioxins, asbestos, etc. Wrote baseline risk assessment reports, health and safety plans, and field operations plans. Sampled soil, groundwater, surface water, underground storage tanks, and air toxics. Performed split sampling, arranged for analytical services, and audited remedial action implementation. Created software for modeling and modeled contaminant transport through soil, groundwater, surface water, and the atmosphere, along with associated risks to human health and to the environment. Project manager for and wrote most of U.S. EPA report: Risk Characterization for Site and Situation Assessment, an analysis of Superfund risk assessment methods, uncertainties, policies and decision analytics. Served as Health and Safety Officer. Wrote key sections of U.S. Army Toxic and Hazardous Material Agency Health and Safety Program Manual on hazardous waste operations, risk assessment, radiation safety, drilling safety, monitoring, etc. Wrote and reviewed proposals, work plans, and potentially responsible party (PRP) reports. Designed and wrote specifications for Ft. Detrick hazardous waste and material storage facilities. Wrote O&M manual for new sludge thickeners, evaluated submittals, audited system installation and startup, and tested and approved instrumentation and controls. Zone Program Manager for 21 person Technical Assistance Team providing U.S. EPA with air toxics modeling, risk assessment, CERCLA and RCRA corrective measures studies, chemical safety audits, SPCC investigations, project scheduling, deadline tracking, and emergency response planning, training and program evaluation.

1986-1987 Engineering-Science, Fairfax, VA Senior Engineer

Principal Investigator for the EPA Background Information Document for the Development of Regulations to Control the Burning of Hazardous Waste in Boilers and Industrial Furnaces, Volume III - Risk Assessment. Performed risk assessments and wrote detailed procedures for monitoring and for emergency response during remedial actions at three uncontrolled hazardous waste sites. Provided evidence and expert testimony for litigation. Helped write EPA procedures for dioxin monitoring. Performed quality assurance on hazardous waste trial burn monitoring for EPA.

Claude Lawrence Cornett, Jr. - Page 2
1985-1986 Rust International Corporation, Birmingham, AL Staff Engineer

Wrote "environmental compliance handbooks" for refuse fired furnaces and power plants. Summarized regulations and permit requirements. Provided detailed procedures for monitoring, pollution control, inspections, record keeping, and permit renewal. Evaluated trial burns and calculated enrichment and emission factors. Wrote detailed specifications for instrumentation, automated environmental data processing, scaffolding, sampling ports, and environmental testing services.

1981-1985 Consolidated Edison Co. of New York Environmental Engineer

Performed dispersion modeling and wrote sections of environmental impact statements and testimony on toxic air pollution emissions and impacts. Filled out permit applications and automated associated procedures. Performed and coordinated environmental compliance audits and designed and coordinated environmental monitoring and receptor modeling programs. Drafted corporate environmental policies and procedures. Provided procedures, technical advice and training to power plant personnel for implementing compliance policies. Wrote and reviewed specifications for pollution control equipment, coal cleaning, environmental monitoring, modeling, record keeping and consulting services.

1979-1981 Monsanto Research Corporation, Dayton, OH Research Engineer

Wrote Volume V of EPA NPDES Treatability Manual. Summarized regulations and wrote guidelines for risk assessment and for permit application review in draft EPA Permit Writers' Guidelines for Hazardous Waste Incineration. Summarized trial burns and wrote sections of EPA Engineering Handbook for Hazardous Waste Incineration. Performed pre-test surveys, designed experiments, coordinated process and environmental monitoring, and wrote emission test reports for EPA. Summarized RCRA, TSCA and other regulations and evaluated cost and availability of equipment and services to comply. Designed a trial burn facility, drafted RCRA Part B permit applications, and modeled impacts of toxic substance emissions.

1976-1979 Dalton.Dalton.Newport, Shaker Heights, OH Pollution Analyst

Provided air pollution and noise modeling, summarized regulations, and wrote sections of environmental impact statements. Evaluated risk assessment methods and wrote DOE and EPA guidelines for monitoring and modeling toxic pollutants from advanced energy technologies and associated environmental impacts. Wrote U.S. DOT guidelines for air pollution & noise monitoring and impact assessment. Wrote detailed specifications for pollution control, monitoring systems and services.

1972-1976 Cleveland Division of Air Pollution Control Pollution Control Engineer

Supervised up to twelve technicians performing ambient air pollution monitoring. Worked with NASA on environmental toxics monitoring, risk assessment, and receptor modeling. Evaluated dispersion modeling and emission monitoring. Investigated complaints, gathered evidence, and prepared and delivered testimony.

1971 Bartlett-Snow, Inc., Cleveland, OH Technician

Operated, maintained, and measured emissions from rotary kilns, calcination equipment, fluidized bed reactors, and hazardous waste incinerators. Calibrated, operated, and maintained emission and process monitoring equipment.

EDUCATION
M.S. Air Pollution Control Engineering, University of Cincinnati, 1972
B.S. Physics, Purdue University, 1969
OSHA 1910.120 40-hr Hazardous Waste Site Worker Protection and 8-hr
Supervisory HAZWOPER Training
American Management Association Supervisory Management Training
Microsoft Office Pro, Advanced Visual Basic, SQL, UNIMAP, TRC, HIWAY, IRIS,
RADTRAN, CALINE, MEPAS, Java, JavaScript, HTML, Fortran, MS FrontPage,
Lotus, WordPerfect, Dreamweaver, E-Commerce, CGI, PERL
DOE Environmental Risk Management, Regulation, and Modeling
DOE Risk Communication
Cleveland Engineering Society Industrial Noise Control
EPA Technical Systems Audit
DOE Risk Assessment Model Review
EPA Air Pathway Analysis at Hazardous Waste Sites

View contact information...
«« previous resume next resume »»
Search Results (Resumes 351 to 400 of 1558)Go to Search Parameters...
Brief Description
I am a talented and hard-working individual, committed to the environment, seeking to gain experience in environmental research.
Risk Assessment Studies, Safety and Environmental Audits, Environmental Management Plans, Environmental Impact Assessment Studies, Basic & Detailed Design and Engineering of Effluent Treatment Plants & Sewage Treatment Plants
Obtaining a position as an Electrical Engineer or Designer to utilize my strong technical, analytical and organizational skills.
Metallurgical engineer with diploma in mechanical engg. and graduate's diploma in computer application
Completed M.F.Sc with specialization in biotechnology , have good knowledge on fermentation technology, cell culture technology, algal technology, molecular biology
14 yrs, in Refinery & Petrochem. Develop& management of cost-effective EHS Programs, Implementation of EMS, Wastewater Treatment, Hazardous Waste, Air Pollution Control Tech., prevention/minimization& recycle/reuse, Knowledge of national and international environmental regulations.
I am chemical engineer with 14 years experieced in corrsion inthe industrial water treatment, process units, coating, cathodic protection, and chemical injection.
Outstanding Engineer
Groundwater sampling, indoor air, GIS, groundwater/contaminant transport modeling
Environmental Engineer looking for a full-time engineering position in the field of environmental, transportation or civil engineering, nationwide, willing to travel, will consider other engineering disciplines if training is available. Prefers jobs in a big metropolitan area, 2 weeks notice needed.
Highly motivated, team-oriented individual with excellent communication skills. Two years of industry experience with Turner Construction-USA & NESPAK-Pakistan respectively. Prepared budget reports, schedules, estimates and bill of quantities and performed engineering supervision of various trades.
At the present time I am working as an Environmental Engineer within the Semiconductor field. I manage the companies Hazardous Waste Management program and teach numerous health and safety training classes globally.
To obtain a civil/environmental engineering position with the opportunity for promotion to project management
Environmental Scientist, with experience in Water Quality. Willing to train for any position. Willing to travel Worldwide.
I am a geologist with at 13 years experience in different fields of engineering geology. I have involved in different engineering geological and geotechnical studies of major infrastructures such as dams and tunnels. I am dynamic and motivative and wish to improve my knowledge in geotechnic
Environmental Engineer/Scientist with over thirty years of experience with project and program management, industrial hygiene, hazardous waste and material management, modeling, monitoring, regulations, risk and technology assessment, pollution control, and environmental remediation
Obtain experience on Environmental Design and Environmental Health focused in Soil, Water and Air Quality Management and/or remediation.
Seeking a position in environmental engineering utilizing knowledge, skills and experience in water and wastewater treatment and design and waste management.
I'm a masters student in the department of Environmental Engineering, University of Missouri - Rolla, USA . I will be graduating in august 2004 and looking for an entry level environmental position. My resume give additional information regarding my background
seeking a position in the construction ,design and research field preferable in Water Resources projects in order to have more experience and to work globally, to be able to apply my professional interest in the field of Water Resources and Environmental Engineering.
Wastewater treatment, waste management, EIA
16 years in Planning/Scheduling/Project Controls for Power/Waste Water/Mining & Metals/Oil, Gas and Petrochemicals projects from concept to commissioning, particularly in multinational, multi cultural and consortium environment in India, Indonesia, Saudi Arabia, USA, Singapore, Bahrain and Canada
Instalation wire, connected panel, worked with high voltage, remodel, fixed, work for customer do my job finished.
Environmental Post Graduate
I am a well rounded geologist and am excited about applying my skills, as well as learn new ones, to the benefit of myself and my company. My MS is in structure and mineralogy from UNC Chapel Hill and my BS from SUNY Binghamton in geology with a concentration in geophysics as well as geomorphology.
I am a civil engineer with an MBA degree from Rollins College, Orlando, FL. I have work experience in geotechnical and transportation engineering. Now, i am looking for a job in geo environmental engineering throughout the world.
Civil Engineer with 4 and a half years experience in wastewater modelling and design.
To obtain a full time position in the field of Environmental Engineering where I can get an opportunity to prove myself by implementing my potentials in the company interests.
Well Experienced in AutoCAD, Microstation, Mapinfo, ArcGIS, Fli-MAP softwares &AutoLISP programming.
Instrumentation fresher
Chemical Engineer with 5 years Experience
I am a highly motivated, quick learner and hard working person. Who has no problem to work in team. I believe in proving my best in whatever responsibility that is entrusted to me and I make sure that my work is completed in very professional manner
I am working as a Safety Relief System Design Engineer at Dupont Nylon-Victoria Plant. The responsibilities include relief device sizing, preparation of safety procedures and maintenance of safety documentation, performing risk analyses, Hazop studies, and process safety estimation of projects.
I am interested in pursuing a career in conservation and GIS. As I have acquired various skills and valuable experience throughout my academic and work career, I feel I have much to offer you. I enclose my resume as a first step in exploring the possibilities of employment with your company.
Recent college graduate seeking a career in environmental engineering in a Latin country where I can learn to speak Spanish fluently. I have experience with environmental phase assessments and geotechnical related work. Please see my resume for further information.
B.Tech. in Electronics & Comm. Engineering[awaiting final sem result] with 70.9% aggregate from Rai Foundation College ,Bhopal (R. G. P. V.Technical University ),and having a consistent academic record together with excellent communication skills.
Dear Sir/Madam,
Looking for IT Related Jobs
Degree in Civil Engineering and Geology
M.SC environmental sciences with 9 years experience in HSE FIELD
My enriching years as an Engineering Manager developed me to be highly motivated, creative and versatile manager with extensive knowledge of machine utilization , overall equipment effectiveness ( OEE ) , calibration procedures , preventive and predictive maintenance and reverse osmosis operation.
To obtain a position in the field of Environmental Engineering and its related fields that will utilize and nurture my skills and knowledge.
Seeking a position that offers opportunity for advancement in fields related to environmental engineering
Objective: A position as a chemist or a chemical engineer. SUMMARY OF QUALIFICATIONS - M.S. in Chemical Engineering, B.S. in Chemistry. - Five years R & D experience in pharmaceutical industry. - Specialty research in Adhesive Bonding. - Strong problem solving abilities.
SAP - SD Certified as solution Consultant with 5 years experience and SAP R/3 6.0
I am a person with leadership qualities and easy going. I have good English level; ability to deal with hard situations and I am adaptable; I have enthusiasm and attitude to learn and to work.I have some experience in Risk because of my degree work: Formulation of Emergencies Plan for National Natur
Fourteen years of experience in cost control, estimating, planning & scheduling, financial analysis, procurement, commercial negotiation and contract administration. Five years of experience in management positions.
RF Engineer in CDMA with exp of 8 months (B Tech In Electonics and Communication)
To extend the existing water distribution network to supply water to properties and to identify critical bottlenecks in the distribution system,„I To design and implement the new network in the demo zone for pressured and uninterrupted flow of water supply for 24 hours in the demo zone,
Communication Engineer
1   2   3   4   5   6   7   [ 8 ]   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32  
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com