Resume - Senior Process Engineer with 14 years of Experience in Oil and Gas and Petrochem...

Misco Jobs

Resume #36450

CONTACT INFORMATION:
View contact information...

SR. PROCESS ENGINEER WITH EXPERIENCE IN OIL AND GAS, PETROCHEMICAL

Key Functional Skills

* Unit Engineering Specialist for LNG plant.

* Review of PFD, P&IDs, Process circuit hydraulics, Heat exchanger design, safety valve sizing, Control valve sizing and process calculations.

* Skilled in use of process engineering simulation models and other software packages, computer tools.

* HAZOP studies, Preparation of operating manuals, Generation of technical concepts and reports, etc.

* Man-hour estimation, Planning and scheduling of activities, input to Planning, execution of activities as per Company procedures and Quality Assurance.

* Techno-economic feasibility studies for new projects including basis of design.

Brief Profile
* Bachelor of Technology ( B.Tech.) in Chemical Engineering.

* Certified Energy Manager.

* 14 Years experience in process of Petrochemical and Gas plant in Operations and Process engineering discipline.

* Proficiency in English language and expertise in technical report writing.

Work Experience
Technip Middle East, Doha, Qatar
(Deputed to RasGas Company Limited, Ras laffan, Qatar)

SENIOR PROCESS ENGINEER
Jan 2007 - Till Date
Job Profile:

„« Provide quality engineering services to LNG plant Operations. Review summaries prepared by Process Engineers. Discuss irregularities/ deviations with Process engineer, Operations and provide suggestions as required. To assist in smooth and efficient operations of plants.
„« Identify problem areas and propose solutions and check similar proposals submitted by process engineers. To provide suitable and cost effective solutions for process¡Vrelated problems.
„« To carry out effective trouble shooting of process abnormalities. Effective tuning of Selexol system to produce on-spec gas resulting in minimisation of flaring and increase in sales volumes.
„« Facilitate Risk Assesments for Change in Facility, Operations, Process parameters to quantify the risk and communicate to the management for approval.
„« Proficient in usage of FMEA tools like Meridium. Performed the role of Principle analyst for process related Root Cause Failure Analysis and have been member of RCFA and Bad Actor analysis Teams.
„« Review Profit Improvement Program items, yields, catalyst, chemicals, operating conditions and initiate changes as required to assist in improving profitability. As a team successfully completed the High Rate Test of Gas plant resulting in 16% increase in capacity. Acknowledged by the Asset Manager by awarding SUHKRAN.
„« Conceptualise and review plant modifications, checking of data, design basis for new projects, reviewing of PFDs, P&IDs data sheets, drawings, participate in HAZOP, commissioning and performance tests. Process discipline representative for LNG asset re-Hazop. Took part in new initiatives like Alarm Rationalisation, Control loop tuning, etc.
„« Effective communication and leadership qualities to align discipline engineers with the Asset team objectives and priorities.
„« To review process feasibility of proposed plant modifications. To check project objectives, compatibility with existing facilities are met. Ensure changes are made through Management Of Change procedures. Co-ordinator of Asset Team Opportunity Management System.
„« Recommend timing, schedule and review operating conditions for catalyst regeneration, test runs. Ensure guarantees are met. Submit Technical report on test run results with recommendations for management approval. Conducted breakthrough test of LPG treaters molecular sieve beds and submitted results to the licensor for evaluating residual life time.
„« Support operations in shutdown planning and execution. Member of the Asset Shutdown team and executed shutdown on lines of EXXON MOBIL shutdown management system. Ensured Quality and Quantity in activities like Chemicals (Dehydration unit Molecular sieves) loading, replacement of Knock out drum demisters with High Performance Mist Eliminators. Carried out vessel inspections from a process engineering perspective.
„« Asset representative in POBP team for analysis of Volumetric Downtime and Benchmarking of Asset based on performance.
„« Review existing technology while keeping abreast of new developments to determine its suitability/ feasibility. To ensure that pre-feasibility studies are undertaken in an optimum manner prior to replacing existing facilities, revamping them or adopting new technology to provide cost effective solutions.
„« Review process-related capital and operating budgets taking into account past and present performance of the plants and processes and new technological developments. To enhance reliability, availability and performance of plants and processes.
„« Utilise process engineering simulation models and other software packages, computer tools to ensure that optimum performance is achieved.
„« Mentor of fresh National graduate engineers.

CHIYODA CORPORATION JAPAN
PROCESS ENGINEER- PROJECTS
Jul 2006 - Dec 2006
Job Profile:
As a member of the Project engineering team
„« Involved in all the activities of HAZOP study of the LNG project such as Node identification, marking on P&ID and listing of Nodes. Take part in Hazop Sessions, preparation of Hazop report, discipline wise listing of open action items. Co-ordinate with discipline lead engineers to close out open action items, communicate the close out comments to the client, finalise and publish HAZOP report with Close out report.
„« Prepared report for submission to client for compliance of P&IDs of LNG plant to SHELL's isolation and maintainability philosophy. Verification done on equipment and system basis for confirming to isolation, provision of vents and drains, provision for connection of utility streams for inertisation.
„« Verified list of Process and Utility header interconnections for correctness as per stream connection number, line size and material specification.
„« Co-ordination with site field engineering team for preparation of equipment list as per empty weight for erection schedules and crane availability.
„« Prepared preservation checklist for Lines, Equipments and skids as per standard norms and vendor requirement.

INDIAN PETROCHEMICAL CORPORATION LTD., MAHARASHTRA, INDIA
POLYETHYLENE - DEPUTY MANAGER
Sep 1995 - Jun 2006
Job Profile:

„« Perform thermal and material balance to benchmark the plant performance.

„« Tuning of various process parameters to conduct different trials of catalysts, additives etc and evaluation of the same considering overall impact.

„« Understanding the philosophy of process technology for capacity expansion.

„« Critical analysis of Process licensor's recommendation with a view of future operations as well as past experience of operation.

„« Responsible for identification of process control requirement, trouble shooting and rectification of existing CL program to accommodate new process requirements.

„« As a member of the Butene-1 revamp team
I have done P&ID review and HAZOP study, Involved in pre-commissioning and commissioning activities and was responsible for stabilization and test run of the plant.

„« As a member of the TIE-IN group of the project team in the LLDPE/HDPE expansion project with INNOVENE Technology
I have done finalization of retrofitting tie-in points, checking of actual hook ups, preparation of check list, as-built checking of the plant, preparation of checklist for mechanical completion of plant and identification of various loops for pre-commissioning activity like line purging, sheet blasting, line flushing etc.

„« Manage operation with key focus on achieving pre-determined production targets with prime grade product quality.

„« Maintaining safety in all aspects of plant operation and maintenance jobs and create a culture of safe practices across all functional groups.

„« Planning and coordinating maintenance requirements of annual turnarounds including statutory jobs.

„« Subordinate development through training and delegation of responsibility with proper guidance.

„« I was a contributing member of the Six Sigma team in the project for improving the ON-Grade production during Grade changes.

„« Recognised by the management through excellent performance award.

NEYVELI LIGNITE CORPORATION LTD
ENGINEER TRAINEE
Apr 1995 - Sep 1995
Job Profile:

„« On the job training, safety orientation, Organisational skills development.

„« Worked as trainee engineer reporting to production manager in the Coal Briquetting plant which is a preparation unit for the coal gasification plant.

„« Experience in operation and principles of belt conveyors, bucket conveyors, chain conveyors, hammer mills, large open tray sieves, rotary steam jacketed tubular driers, electrostatic precipitators.

„« Gained experience in maintenance planning and co-ordination with external and internal customers.

TANFAC INDUSTRIES LIMITED, TAMILNADU, INDIA
GRADUATE ENGINEER TRAINEE
Jan 1995 ¡V Apr 1995
Job Profile:

„« Shift Engineer for CRYOLITE (Sodium Aluminium Flouride) manufacturing unit.

„« Experience in preparation of batch sheets, addition of chemicals in batch reactors. Operation of vacuum driers, oil fired rotary kiln driers and bag filters.

„« Gained experience in maintaining process parameters to ensure quality.

„« Monitoring of bagging and loading section with inventory management.

„« Manpower management.

„« Ensure safety in all aspects of operation.

Education
UG: B.Tech/B.E. (Chemical) from NIT/REC, Tiruchirappalli, India.

Certification: Certified Energy Manager, Certified Energy Auditor.

Training
Discipline Topic Trained by

Control system US/AMC Implementation Tata Honeywell, Pune

Energy Pinch Technology Developers of Aspen PINCH

Process safety Hazop Workshop Tata AIG

Process safety Risk Assessment - Level 2 Faculty from Exxon Mobil

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 1622)

Go to Search Parameters...

Brief Description

I have spent about 8 years, applying innovative approaches to spatial data development, Integration and Management practices in my various capacities.

PhD in Chemical engineering with lots of laboratory experience including, but not limited to design of experiment. Cummulative GPA 3.52. Specialized in electrochemical synthesis.

I Mohammed Yaseen Kajee hereby wish to apply for employment through your company in the capacity of Client Projects Quality Manager, Senior Client Quality Assurance Engineer / Inspector and Client Safety Representative. I have had extensive experience in Quality Management Systems , Pressure Vesse

Autocad. Pro engineer

HSE Engineer

Since April 2004: Aeronautic Source Inspector “hardware” in Bourges and Méru (only 1 to 2 missions of 4 hours/month) for a diversified technology and manufacturing leader, serving customers worldwide with aerospace products and services (40% of sales); control technologies for buildings, etc

Project Management / Engineering Coordination / Process Engineering / Business Development

Registered EU Mech. Eng w/ 15 years experience in the oil and gas environment - North America, North Africa, Middle East,. High-energy individual whose best attribute is my ability to work well with other people.

Experienced and hands on work on MTS, SEM, XRAY, Hardness, Optical Microscopy, Metallography, Lecos etc.

I completed a Master Degree in Business Adminitration and Bachelor of Science Degree in Mining Engineering, and have more than eight (8) years experience working in the mining environment.

I am an experienced member of a Cost Management company based in Abu Dhabi with previous experience as a Quantity Surveyor in a variety of fields including construction, development and consultancy services. As an industry professional with a Diploma in National Building Science, extensive technical

HVAC, Facilities Maintenance

Precision Millwright w/ Machinst and Electrical Background

Instrumentation & Commissioning Analyzer Engineer

Welding and electrical and management and mining class 32 hour certified fork lift operator

Free! DYNAMIC PROFESSIONAL - MASTER OF SCIENCE - CONSTRUCTION SAFETY COORDINATOR - PROJECT MANAGER -ADVANCED FIRST AID, SAFETY, & RESCUE

With over 9 years of experience in U-verse (IPTV, HSIA and CvoIP) Secornd Level Technical Support (Tier 2) and Fiber Optic (Video, Voice and Data) installation, Cable TV technical communication, satellite installations, hard work, imagination and commitment, together with strong communication and in

Programming Languages: C, Embedded C & Assembly level programming for ƒÝP and ƒÝC ,8 Bit (8051, PIC), 16/32 Bit processor (ARM7 TDMI), PIC 16F73, 8051, ARM7,PCB Designing using Or CAD,RS 232, SPI, IIC, CAN V2.0,MS Windows 9x and upward,networking, service manager

I hold Higher National Diploma in chemical Engineering, from Kaduna Polytechnic. My skills are; water treatment processes, safe chemicals handling,process valve control, Pumps operations, safety (HSE), Chemicals preparation, Process monitoring, Instrumentation, Chemical cleaning, etc

Engineer with 15 years of experience in Supply Chain, Operation, Project & Construction management

Under general supervision, I can inspect, isolate, troubleshoot and repair electrical malfunctions using various test instruments; maintain and repair programmable lighting and access systems; test electrical equipment for safety and efficiency; plan the layout and wiring of new plan

I am diplomaed Engineer - geologist/hydrogeologist, having some experience in micropalentology.

I¡¦m a Canadian/ Syrian citizen with Business, Engineering, Water/Wastewater and (HSE) Health Safety Environment Background I have been working in the field of HSE (Health Safety Environment) management for past 10 years/ 5 yr Management HR BUS PR Project GS ADM OPS

Field Project Manager (Crosswell Seismic). Highly motivated, enthusiastic Borehole Seismic Project Manager with 11 years of wireline and seismic experience. Successfully managed numerous projects in diverse locations around the world.

I & E Inspector, Electrical GF, Lead Electrician - 20 + years experience in industrial and commercial

Chemical/Process/Project/Field Engineer/Chemical/Process/Project/Field Engineer

Safety Officer, Process Supervisor and Marine Engine Driver and experienced in Petrochemicals, Power Plant and Marine Industry

HSE Specialist

1. Implementation of Quality Management Systems (New and Old versions)

Senior Process Engineer with 14 years of Experience in Oil and Gas and Petrochemical

Geologist

Automation and Instrumentation Specialist. College diploma in industrial electronics (Teccart Institute) option: regulation, instrumentation and automation. Graduated with distinction, May 1999.

Diverse experience in the fields of failure analyses, corrosion of steels, protective coatings and paint film systems, welding and materials selection, complemented by a strong background in mechanical engineering. Excellent communication and organization skills, dedicated to quality and accuracy wi

CCNA, CCVP ,C, C++, HTML, DHTML, ASP, JavaScript 1.2, Java 1-2, CGI-PERL, MS Office, MS Exchange Server, windows, Windows NT 4.0, windows 2000,2003,SQL Server, MS Access

Geologist

I am proficient in critical thinking, research, and writing skills; the spirit of teamwork; and the ability to effectively communicate, both verbally and orally, graphic design and functionality to an audience. I possess a wide range of graphic skills from manual to computer aided.

Twenty five years experience in Safety, Health and Environmental Inspections, Supervision and Management

MSc Engineerign Geology, experienced in geotechnical engineering designs and SI

Vast experience in Engineering, Construction, Mining and Design:

I did BE Mech in 1999. I've Five years Experience in Die Casting field. Experience in Design and Manufacturing of Pdc dies. My skill is to prepare the fmea meeting of designing area with checklist presentation ie. functional & design related points and then all the drgs are submitted to Mfg team.

BS EE, Program/Project Management, Business Development, MS Project, Oracle Financial Analyzer, Data-Voice Value Added Service projects & business, GSM 900 infrastructure (Ericsson) deep knowledge, Wireless and Service Engineering Planning, MS Office, IP Networking

A generalist HSE Manager with experience in oil & gas industry at several international locations with HES / Project Engineering / Operations background. HES Program development focus. Culturally sensitive.

Logistics, Technology, Transport and Management Professional

Highly motivated Ph.D. Chemist with a broad range of skills looking for a position that involves challenge and innovation.

Electrical Engineer with Project Management experience in construction and power

Geoscientist looking for work

Quality, Health & Safety and Environment Management/Auditing

Lead Electrical Outage/Modification Project Planner, Senior Electrical Planner, Mechanical Supervisor, Safety & Environmental Manager, OSHA Certified Instructor, QA Supervisor, QC Field Supervisor and Lead Electrical Inspector.

A seasoned, highly organized construction professional with over 39 years of heavy industry experience which includes both industrial construction sites and field/shop fabrication locations in all major industries worldwide

I am an experienced Mechanical Engineer in the field of Design & Welding (IWE) Engineering. I obtained my Dipl-Ing. certificate (equivalent of MSc(Eng.) in Design and Construction of Agricultural and Construction Machinery from the Technical University of Berlin in Germany

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out