Resume - A Graduate in Master of Technology (M.Tech) in Environmental Engineering and Man...

Misco Jobs

Resume #3822

CONTACT INFORMATION:
View contact information...

Academic Profile:

* Master of Technology (M.Tech) in Environmental Science & Engineering from Indian
Institute of Technology (IIT) Bombay, India
* P.G. Diploma in Environmental Management from Central University, Hyderabad, India
* Bachelor of Engineering (B.E) in Civil Engineering from Andhra University, Visakhapatnam,
India

Memberships:

* Member of Indian water Works Association, India
* Member of Environmental Science & Engineers Association, India
* Member of Indian Environmental Association, India

Technical Paper:

* Monitoring and modeling of indoor-outdoor air pollutants in an urban region in India by V. Ananda Kumar and Rashmi S. Patil, in the "Indoor Air 2002", 9th International
Conference on Indoor Air Quality and Climate, held during June30-July5, 2002 at
Monterey, California

* Indoor-Outdoor Relation of Aerosols for Mumbai City by Rashmi S. Patil & V. Ananda Kumar at 2nd Asian Aerosol Conference, July 1-4, 2001, Pusan, Korea.

* Evaluation of methods for analysis of Benzene in the work place environment" by V.Ananda
Kumar & M. Phani

* Working on technical paper titled "Measurement of Oxides of Nitrogen (NOx), Nitrogen
Monoxide (NO) and Nitrogen Dioxide (NO2) from coal based thermal power plants in India"

Trainings:

* Attended the training program on the "Instrumental Analysis of Environmental Samples" conducted by Bhagavathi Ana Labs Ltd., Hyderabad. India, during March 4-8, 1997

* Attended the training program on the "Safety Practices in Petrochemical Industry" conducted by Indian Petrochemical Corporation Ltd., at Vadodara, India, 5 July 1999

Work Experiences:

* Till date-Aug 2003 - Environmental Engineer,
SEW Ltd., Al-Khobar, Saudi Arabia

* Jul 2003-Feb 2001 - Sr.Engineer(Projects)
Environment Division, Ana Labs, Baroda, India

* Jul 1999-Aug1997 - Sr.Engineer (Environment)
BAL Ltd., Hyderabad, India

* Jul 1997-Aug 1994 - Environment Engineer
BAL Ltd, Hyderabad, India

Capabilities & Areas of Exposure:

* Air quality monitoring, source emission monitoring and compliance studies for petrochemical, refinery, cement, chemical and pharmaceutical companies
* Specialized in air and emission monitoring as per US EPA, ISO, IS and CPCB
methods
* Compliance studies and documentation for AIR and WATER Permits
* Designing, engineering, estimation and costing of pollution control facilities
* Indoor-Outdoor Air Quality Monitoring (IAQM) model development and validation
* Designing of air / water quality network for environmental studies
* Personal, work environment monitoring as per OSHA and NIOH guidelines
* Water and wastewater quality testing as per APHA methodologies
* Performance evaluation and trouble shooting of treatment systems
* Operation and maintenance of wastewater treatment plants and waste treatment
* Environmental management systems auditing for Fertilizer, Chemical,
Pharmaceutical, Cement Dairy and Light manufacturing units.
* Documentation related to EMS and ISO 14000
* Participated in model development and validation studies
* Coordinated with air modeling specialists to prepare modeling reports.
* Preparation of EIA, EMP reports.

Major Project Association:

* Flue Gas Emission Study for a refinery Khafji Joint Operations, at Al-Khafji, Saudi
Arabia as per the environmental protection agency (EPA) methodology

* Baseline environmental monitoring studies for environmental impact assessment of a refinery of Madras Refineries Ltd., Manali, India

* Industrial pollution prevention project-II, base line air and water quality data generation for 2 districts in Andhra Pradesh, India. Sponsored by Andhra Pradesh
Pollution Control Board, funded by World Bank

* Development of standards for oxides of nitrogen (NOx) for coal based thermal power plants in India, sponsored by Central Pollution Control Board (CPCB), New Delhi, India

* Regional environmental management plan (REMP) based on the carrying capacity studies at
Paradeep, Orissa, a project sponsored by Orissa State Pradesh Pollution Control Board,
Bhubaneshwar, India

* Performance evaluation of the De-Noxing System for Caprolactam Plant at Gujarat State
Fertilizers and Chemicals Ltd., Vadodara, India

* Performance guarantee studies for the wastewater treatment facilities at Oil and Natural
Gas Corporation Ltd., Gandhar, India

* Environmental management systems (EMS) auditing for Bayer Diagnostics India Ltd., GE
Lightings India Ltd., Gujarat State Fertilizers and Chemicals Ltd., in India

-------------------------------------------------------------------------------

DETAILED PROJECT EXPERIENCE

--------------------------------------------------------------------------------

Led the team for the following projects at various parts of India and abroad.

OVERSEAS ASSIGNMENTS

Carried out continuous monitoring Flue Gas Emission Studies for a refinery Khafji Joint Operations, at Al-Khafji, Saudi Arabia. A project of SEW Ltd., Al-Khobar. US EPA methods have been employed to carry out the Continuous monitoring.

The project involved monitoring the flue gas emissions from chimneys under various load conditions viz. full load, normal load and at different conditions of firing viz. Low firing and high firing. EPA promulgated methods were employed to measure the flue gas temperature, velocity and pollutants for various scenarios identified. Chimneys connected to various sources were identified viz. boilers, D.G sets, and process stacks under various fuels like- Furnace oil, Fuels Gas and Bunkers Oil. Continuous monitoring was carried out for a period of 3 hours using the flue gas analyzers for the Pollutants- Particulate Matter, Sulfur Dioxide, Oxides of Nitrogen and Carbon Monoxide. Flue gas composition was also estimated. The parameters viz. Nitrogen, Oxygen, Carbon Dioxide, carbon monoxide, Excess Air were estimated.

ASSIGNMENTS IN INDIA

"Industrial Pollution Prevention Project-II, Base line data generation studies for the various districts in Andhra Pradesh". A project sponsored by Andhra Pradesh Pollution Control Board, funded by World Bank.

Reconnaissance studies were conducted for the entire study area. Protocols were developed for various identified components. Site selection was carried out for various components like- air, Noise, water and soil. Longitude and latitude of the sites were identified using GPS handsets. A network was planned environmental monitoring. Based on its importance selection and prioritizing of the pollutants is carried out. Environmental monitoring was carried out as per the developed protocols. Statistical Analysis was carried out for the data generated through the field studies and reports were prepared.

Development of Oxides of Nitrogen for Coal Based Thermal Power Plants in India, Sponsored by Central Pollution Control Board (CPCB), New Delhi

The project started with the listing of various coal based power plants in India. Power stations were selected based on the age and the technology in coordination with CPCB. Literature survey was carried out on the best available control technologies (BACT) and the practices. Protocols were developed for the measurement of Oxides of Nitrogen (NOx), NO and NO2. Measurement of NOx was carried out confirming to EPA methods both conventional and the auto flue gas analyzers. Additional parameters like excess air, flue gas temperature were also measured. Information related to project viz. temp in the combustion zone, pollutant residence time, plant load, grade of coal used and control technologies were also collected. Measurements were carried out at various Thermal Power Stations of range 60- 500 MW. Report comprising of present scenario of power plants with respect to NOx across the country was prepared and submitted.

Regional Environmental Management Plan based on carrying capacity studies for Paradeep, Orissa a project sponsored by Orissa State Pollution Control Board (OSPCB), Bhubaneshwar.

The project was initiated reconnaissance studies. Protocols for various identified components were developed. Monitoring sites were selected for various components like- air, Noise, water and soil. Longitude and latitude of the sites were identified for all the stations using GPS handsets. Monitoring network was planned for environmental monitoring. Pollutants were identified based on their importance. Environmental monitoring was carried out as per the developed protocols. Statistical Analysis of the data generated through the field studies was carried out. Various highly polluting industries were identified in the study area. Environmental management systems were audited at all the industries identified in the study area. Emission inventory for study area was prepared for various sources viz. line, area & point. Environmental Management Plan (EMP) for the entire region was formulated and report was submitted.

Environmental Monitoring/ Baseline Environmental Data Generation

* Baseline environmental data generation for air, water, noise and solid waste quality for refinery expansion project of Madras Refineries Ltd., at Manali.

* Annual Maintenance Contract for the Environmental Monitoring works at Indian
Petrochemicals Corporation Ltd.,Vadodara

* Annual Maintenance Contract for the Environmental Monitoring works at Gujarat Fertilizers
& Chemicals Ltd., at Vadodara

* Seasonal Environmental Monitoring works at Singareni Collieries Co. Ltd., Kothagudem,
* Annual Maintenance Contract for the Environmental Monitoring works at KCP Cements Ltd.,
Macherla

* Baseline environmental data generation for the air, noise water and soil at Pipe line
Project of Indian Oil Corporation Ltd., Kandla to Bhatinda.

Environmental Management Systems (EMS) Auditing

The project involved reviewing the EMS of the industry which included verification of the air, water and hazardous waste permits. Treatment facilities were inspected and performance was evaluated for air, wastewater and hazardous waste facilities. Alternative, cost effective treatment options were suggested for better compliance. A complete environmental compliance report with suggestions for improvement of EMS was submitted at:

* ITC Ltd., ILTD Division, at Chirala,
* Amul Dairy, Anand,
* Bayer Diagnostics (I) Ltd., Vadodara,
* GE Lightings, Nadiad,
* Gujarat State Fertilizers and Chemicals Ltd., at Sikka
* Rubamin Pharmaceuticals Ltd., Dabhasa
* Ficom Organics Ltd., Ankleshwar
* KCP Cements Ltd., Macherla
* IBP Explosives Ltd., Ramagundam.

Performance Guarantee (PG) Studies for Air Pollution Control Equipment

P.G. studies involved the measurement of the pollutant concentration levels at both inlet and outlet of the pollution control facilities. Studies involved the protocol development for the stack gas testing for particulate matter as per the EPA methods. Measurements were made for PM both at inlet and outlet of cyclones, multicyclones, dust bags and electrostatic precipitators. Iso-kinetic conditions were maintained for sampling. Other parameters like composition of the flue gas and moisture content were measured. Particle size distribution was also carried out. Necessary operating conditions were noted from the respective plants for the correlation of the generated data. A report comprising of the plant conditions and the performance of the pollution control equipment is prepared.

* KCP Cements Ltd., Macherla
* Penna Cements Ltd., Tadipatri
* ITC Limited, Chirala

Research & Development Projects and Case Studies

* Study on the performance guarantee studies of the NOx Scrubber of Gujarat State
Fertilizers and Chemicals Ltd., at Vadodara.

* Study on the analysis of the individual Hydrocarbons (C1-C7) from the flue gas emissions of a refinery and petrochemical complex for, Central Pollution Control Board (CPCB)
Western Regional office, Vadodara.

* Study on the validation and performance evaluation of the Water Quality Model for Larsen and Toubro Ltd., at Rajula.

* Study on the Evaluation of methods for the analysis of Benzene in the work place environment at Gujarat State Fertilizers and Chemicals Ltd., at Vadodara.

Environmental Impact and Risk Assessment Studies

* 5MTPA expansion project of cement plant of Zuari Cements Ltd., at Yerraguntla, AP
* 100 MW Naphtha based power plant of Snehalatha Generation Co Ltd., at Samalkot, AP
* EIA study for 60 kL/d expansion project for distillery of Gauri Distillery Ltd.,
Gauribidnur
* EIA study for upcoming project of bulk drug and pharma unit of Jupiter Orga Ltd., at A.P

Wastewater Engineering

Basic and Detailed Engineering Designing: of the units and structural design, selection of equipment, estimation and costing of items for

* Wastewater Treatment Plant of capacity 100 kL/d for Indo Matsushita Carbon Company Ltd.,
Nellore.
* Wastewater Treatment Plant of capacity 400 kL/d for Sugar Industry, Gaytri Sugars Ltd.,
A.P
* Wastewater Treatment Plant of Capacity 10 kL/d for Zinc Removal at Lakhanpal National Ltd.

Water Auditing:

Identification of sources of water and different streams of wastewater, estimation of the detailed water balance which included, designing of the open flow channels and V-notches and measurement of flow across them at:

* KCP Cements Ltd. Macherla, A.P
* Orient Cements Ltd., Devapur, A.P
* G.E. Lightings (I) Ltd., Nadiad, Gujarat.

Operation and Maintenance

Operation of the various units, day-to-day performance evaluation, optimum does fixation for the chemicals and of trouble shooting for:

* Common Effluent Treatment Plant of PET Limited at Hyderabad.
* ETP of Indo Matsushita Carbon Company Ltd.,

Performance studies for Effluent Treatment Plants

* Effluent Treatment Plant Oil and Natural Gas Corporation Ltd., at Gandhar, Gujarat.
* Common Effluent Treatment Plant of Patancheru EnviroTech Ltd., (PETL) at Hyderabad.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 301 to 350 of 1619)

Go to Search Parameters...

Brief Description

I am currently a graduate student at the Univ. of Illinois at Urbana-Champaign in the Env. Engineering Dept. I seek a job that will give me the opportunity to explore the field of env. engineering. One in which I can be active both physically and mentally and that challenges me.

Three year working experince in field of hydrogeology and hydrochemistry.

I am a Chemical Engineer with Seven years of experience. My experience can be divided in to two main categories; industrial and consulting, on air and wastewater, treatment, operation and maintenance encompassing permit applications, work plans for regulatory compliance in the areas of Environment,

Hydraulic Design, Troubleshoot, Repair and Manufacture

Petroleum and Natural Gas Engineering, BSc Earth science, MS Candidate

Experience in pollution assessment, emission inventories / monitoring, characterisation of sources, exposure assessment, source testing, data collection & interpretation, emission estimates, regulatory analysis, engineering calculation, presentation and technical report writing.

ME (Environmetal Engineering), 4+ years in desing of waste water treatment units, design of under ground drainage network systems to cities.

Dynamic Assistant Professor of Environmental Engineering broadly experienced in contaminant transport modelling and pollution control in surface and groundwater. Physico-chemical, biological and electrochemical design of environmental control processes, hazardous waste management and treatment.

Iam a postgraduate in Environment Management worked with various petrochemicals, chemical, pharmaceutical, bulk drugs and Oil & Gas E&P industry for the past 8 years in various countries. My experience has been as an Environment Engineer; Environmental Specialist; QHSE Engineer and EMS staff in

Assistant Product Engineer " Wafer Probing ang responsible for Yield improvement "

Desktop technician

Diploma in Mechanical Engineering. (Good in Auto CAD Draughting and Designing)

Senior Weld Mgr / Engineer. I have for decades specialized in providing management support for the implementation of Best Weld Practices and the establishment of Weld Process Controls. I

I have 15 years of working experience with over 5 years in senior management positions with international companies in Asia.

Chillers Process Systems, Compressor Screw & Reciprocating & Centrifugal,Motor Starter,Cascade Refrigeration, Gas Compression,Ammonia Plants,Control Panel, PLC's, VFD's

PhD in enironment engineering

A talented land Surveyor who is able to deliver services in Cartography, photogrammetry, cadastral, mining and Geomatics work.

Technological Assessment and Management -environmental studies, transportation and energy production

Environmental Engineer with more than 7 years professional experience in water projects. Right now, she is acquiring her Masters Degree in Environmental Engineering Science, UNSW, Australia.

I have a BS in Chemical Engineering from Colorado State University. I am a recent graduate from the Environmental Science and Engineering department at Colorado School of Mines, where I completed graduate Master’s research and thesis work specializing in groundwater remediation.

A Graduate in Master of Technology (M.Tech) in Environmental Engineering and Management. having 8 years of experience in the areas of Environmental, Health and Safety Projects Management.

ITI fitter I have 6 years experience in mechanic field also i know lathe ,milling machine operations

Piping Designer PDS CAD

Dynamic, highly adaptive professional offering 20+ years’ experience.

Technical /Project Engineer

I have experience in control systems design, Motor control center design, Variable speed drives, PLC and SCADA programming, power distribution network design. C/C++ and MATLAB programming skills

Proficient in Microsoft Word and Microsoft Excel, Knowledge in Time and Motion Study and Quality Control, Good in communication and writing skills

Experiennced Environmental Scientist

OBJECTIVE A challenging position which provides opportunity to improve my skills as a Senior Process Engineer.

Machine and computer expert

Am adepoju Ademiposi gabriel by name just finished my NYSC,during my youth service i was a site supervisor of construction of Drainage,installation Motorized of Bole-hole in my plce of Primary assingment.

attached for Safety Officer designation

HSE Engineer-a good educated, skilled and experienced individual on construction, fire protection and safety operations aspects, attained from exposure in different industry, hard working individually and in team, friendly and outgoing, self-motivated and well- organized

I am diciplinarian, and had strong in interpersonal and comunication skill with experience in leading the group of fishermen to continous their bussiness improvement. I liked to work with the well planning and target oriented. I had a good knowledge of different social culture of indonesia.

Safety Engineer

Experienced with water/wastewater treatment technologies, Experience in designing reterofitting structures for highway bridges, Good knowledge of urban storm water hydrology and GIS software.

I would like to take this opportunity to present my employment credentials for your consideration, and I would welcome the opportunity to introduce myself to you at your earliest convenience

COMPUTER GEOLOGIST Databases, GIS & 3D Modelling Project & Quality Management

CFD (Computational Fluid Dynamics), Multiphase/Multi-component flows, Fluid Flows, FSI (Fluid Structure Interaction), ASI (Arbitrary Sliding Interfaces), Heat Transfer, Thermal engineering, Design/development, Combustion, Chemical/Reaction Kinetics and Chemical simulation, PhD, Mechanial Engineering

Looking for a challenging position in the field of Civil Engineering, Construction Utilities.

Total 7 years of industrial experience in the large manufacturing set-up/project, in the field of Environmental Management and Resource Conservation and Infrastructure Development projects planning, operation and monitoring.

Strong Academic and Labratory Skills in Geology. Management experience, 13+ years of work experience, Quick to learn, can work solo or in a group, ready and willing to learn anything new.

Sr. Field Engineer, 20+ years, excellent customer service skills, electro-mechanical repair, maintenance

Safety Trainer seeking entry level position with Safety minded company.

BE CIVIL, SPECILIZATION IN ENVIRONMENTAL, MDBA

Experienced Civil / Structural Engineer

Design, collaborative Industrial design, product development, rapid prototyping, surfacing, drafting, Pro/E, Solidworks, plastics, sheet metal, die cast, machining, weldments, tooling, GD&T, analysis, concepting, presentation, project management tools, materials sourcing, costing, vendor interface

I have completed my graduation in Computer Science. Have worked with Bell Canada as a Tech support Customer Representative. Right now working in a telecommunication Industry for Sony Ericsson as Software engineer.

29 years of Intergraph/Microstation, 9 years of AutoCad, 8 years of civil roadway design ,5 years InRoads, 4 years GeoPak, 3 years PDS/Frameworks, 2 years Bentley Structural TriForma

3D Modeling, FEA, ANSYS, GTSTRUDL, STAAD, RAM, RISA, CAESAR II. USA, British, Euro, China, Russia Codes and Industries Standards.

1 2 3 4 5 6 [ 7 ] 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out