Resume - Handled operations Batch Chemical Processes, Fermentation, Distillation, Extra...

Misco Jobs

Resume #38445

CONTACT INFORMATION:
View contact information...

TITLE: A Diploma Chemical Engineer with > 10 yrs. Experience of Chemical Process and Fermentation Bulk Drug Plant.

OBJECTIVE: To contribute my knowledge and skills for the Growth of the Resumed organization & My Family.

EDUCATIONAL QUALIFICATION:
* Diploma Chemical Engineering: completed 3 yrs. Diploma course with Honor of standing 4th (78.18%) in Chemical Engineering stream in the year August 1994 (Exam conducted by MSBTE, Maharashtra).
* Project: "Desalination by Reverse Osmosis" under the technical guidance of ION Exchange India Ltd. Ambernath, Dist. Thane.
* Presently doing Correspondence Masters Diploma in Biotechnology from Bioinformatics Institute of India (Batch October 2005 – September 2007).

PROFESSIONAL COURSES:
- Completed one year course of Mechanical Draughtsman from Academy of Technicians, Mumbai-28, with 70.00% marks in the year June 1991.
# Completed one month Training Program of "Process Control Instrumentation" (PLC based system) from Advanced Training Institute, Mumbai-22 in September 1997.
- Attended In-house cGMP Training program at Wyeth Ltd.(Faculty - Mr. Atul Shirgaonkar, Insight Systems Inc.Pune.)
- Attended the Civil Defense Basic (Unit) Course at Wyeth Ltd. in February 2000.
- Computer Skills: MS Office, MS Project, MS Visio, and AutoCAD 2000.

WORK EXPERIENCE:
- Trainee Diploma Engineer: Appointed as a Trainee from October 1994 – April 1995 in the Chemical Process & Fermentation Department, Wyeth Ltd. Mumbai-86.
- Plant Operator: Worked as a Plant Operator from May 1995 – January 2001 and Sr. Plant Operator from January 2001 – October 2005 in the Fermentation & Solvent Recovery Distillation Department, Wyeth Ltd. Mumbai-86.(Handed over the mfg. facility to Ariane Orgachem Pvt. Ltd. from September 2004.)

WORK PROFILE:
I have experience of handling the following Unit Operations, which involve the Preventive, Predictive Maintenance of operations. Regular checking of it's functioning and Overhaul.
They are:
A) Batch Chemical Processes/reactions (Hydrolysis, Hydrogenation, Bromination, Acetylation etc.) & Purification's using (GLVs & SS316) Batch Reactor (Vol.500L – 2500L).
B) Bio-transformation:
Operation of Aerobic Fermentation (Fermentor capacity 50L – 15000L) and Scale up/Process modifications.
1) Empty Steam Sterilization & Media preparation, steam sterilization of media, Air
Filter System and Process lines etc.
2) Sterile transfer of growth from Seed – Inoculum – Fermentor
3) Substrate charging for conversion under sterile condition.
4) Maintaining of process parameters viz. pH, Sparged Air flow-rate, Backpressure, Temperature, Scheduled Sampling, Foaming Control, Covn.Quenching, Sterility of the whole process etc.

C) Bio-separation & Purification:
a) Extraction: Operation of Various types Extraction Equipment and Systems.
- Podbialniak Centrifugal Extractor: Starting & Stopping, Changing the rpm According to Density of Extracting Broth, Maintaining of back-pressure, Flow rates of all incoming & outgoing fluids, Sampling etc. Opening of the Extractor for Cleaning & it's Overhaul.
- Static Mixer Extraction System: Operation of Static mixer along with it's assembly for Bacterial Broth Extraction at different flow rate.
- Agitated Tank extraction System and it's assembly with Solvent charging in the form of spray

b) Evaporation: Parallel & Series operation of Force-Feed-circulation Evaporators (Vacuum and Atmospheric operation)

c) Filtration & Drying: Operations of Rotary Drum vacuum filter, Basket Centrifuge, Crystalliser, Nutsche-type Filter, Rotary dryer, Tray dryer, Blenders, Granulator, V- Mixer, Automatic type Leaf filter, etc.

D) Operating knowledge of plant utility section of the company such as Fermentation air unit, Process air unit, Instrument air unit, Brine Plant, Water chilling plant, Cooling Towers, Air compressors, Centrifugal & Positive Displacement Pumps etc.

E) Solvent Recovery Distillation: Distillation of crude solvents using semi Automatic Fractionating Column (packed Tower). Crude solvents such as Methanol, Chloroform, Acetone, Ethylene Dichloride, Toluene, Methylene Chloride etc.

JOB RESPONSIBILITIES:
- Follow the SOPs and cGMP while working on the shop floor.
- Product Batch size selection, Set, Maintain, Monitor & Control Process parameter, Filling of the Batch Tickets (BPR), Startup & Shutdown of all Operations etc.
- Maintain production Quality & product Yields.
- Control Inputs – Outputs within specified limits
- Maintain safety and good housekeeping of work area.
- Check and monitor day to day stock of crude and fresh solvent storage tanks in the Tank-farm area.

ACHIVEMENT: Actively participated in the Preparations of PID/PFD's, Tank Farm Diagram of the plants. Submitted Process Modification/Scale projects in the company and received appreciation letter from the Production Director.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 1622)

Go to Search Parameters...

Brief Description

Project Engineer Automation Controls Instrumentation PMP Certified 9+Years exp Plant Automation PLC SCADA DCS Project Manager CAP

NEBOSH Certified HSE advisor, HSE Trainer, Tech-IOSH member

Capable working with minimum supervision as solids control and drilling waste management eng, Mechanical skill, computer and management.

Project Engineer wit BSc of Chemical Engineering and experiences in oil and gas

Perform concurrent duties of a project manager which involve the management of several Aramco and non Aramco projects in close coordination with the client and/or his representatives and with the engineering design team

Mechanical Engineer with proficiency in IDEAS, Nastran

A dynamic accomplished Information Technology Professional with unique combination of experience in Networking and Hardware. Strong Analytical, Organizational and problem solving skills. Ability to identify Operational Deficiencies, skilled in applying Technology and Administration practices to impr

Mechanical engineering finite element analysis composites ansys Master's

Highly organized and innovative Manager with an exceptional track record of cost minimization through creative procurement approaches and proactive management style focused on building trust and improving departmental teamwork in fast paced union environments.

PLANNER SMELTER

PDMS-11.6, PDS-7.1, Autocad-2006, CAEPIPE 5.11, Pro-E Wildfire2.0

Handled operations Batch Chemical Processes, Fermentation, Distillation, Extraction, Evaporation, Plant Utility Section, Pumps & Compresors, Safety of 3M's and Housekeeping, Maintenance & Overhaul of Operations, Troubleshooting, Startup & Shutdown of the operations in the cGMP environment etc.

Experienced Project Controls Specialist in engineering and construction industry. Skilled in project cost, scheduling, analysis and forecasting .

analyst

Research and Development Metallurgist . Seeking career prospects in metallurgical processing, mineral resources (ferrous metals, base metals, precious and rare metals), process improvement and optimization, research and development, project management, process-business analysis

Coordinate services for wells,oversee project,finalize all paperwork and run daily reports for wells.

Seeking a full-time position in Quality Assurance

Junior GIS Specialist ( Mapinfo pro. - Arc GIS .....).. Geologist

Retired PAF personnel having 25 yrs of experience and also remianed as instructor.

Degreed Electrical Engineer with Pro/E Wildfire 2.0 and Pro/Cabling training

7 years engineering and management experience in the oil and gas industry. PMP certified with extensive civil engineering experience.

SAP FICO consultant with 10 years experience

A senior cost & controls engineer with extensive experience and a professional qualification in Mechanical Engineering coupled with a strong background in project management,project controls, contracts administration,variation orders &claims management.International experience in large EPIC projects

Seeking Chemist or Laboratory Technician Position-will relocate

Research Thesis on ANTENNA/RF

Can handle all operations of a mine surface or underground. See resume for additional experience and qualifications.

Manage systems, hardware software, connectivity link, Manage Active Directory,Manage DHCP Serverý

Having good leadership qualities, I can effectively lead and motivate a team. Possesses good inter-personal skill. I value success, which gives me the motivation and drive necessary to achieve personal and company goals. Experience in safety and 5S system implementation

Health, Safety, Environment

Strong knowledge in electronics industries PCB design, assembling, trouble shooting

Professional mechanical/industrial engineer seeking a project engineering managmenet or consulting position. Offer extensive engineering and management skills in the industry.

Geologist with background experience in Mining and Exploration of mineral resources- gold and base metals. QAQC for sampling projects. Ability to prepare technical Exploration reports for Project Managers incl drilling proposals.MapInfo, Micro-Mine, Vulcan, MP3, MS-packages.Ore reserve calculation

Master of Science in Mechanical Engineering Zone and Energy Manager, Facilities Maintenance Manager

CHEMICAL PLANT OPERATION

Project Management / Lean Training / PFMEA (Process failure modes and effects analysis) / PCP (Process Control Plan) / PFD (Process Flow Diagrams) / Lean Manufacturing / 5S / Value Stream Mapping / Visual Management

HVAC, Maintance

I have been working as a Computer Technician for the past two (2) years. I received eight (8) CXC subjects and BSc. in Electronics and Communications from the University of Technology. I also have two (2) years engineering related experience working with TCom/Huawei Technologies/CLARO.

Driven by innovation and integrity as a member or your technical group I will be able to provide technical drafting support using the latest version of Microstation, Intergraph, Auto Cad and other GIS, ICGS software platforms. In addition, perform non-routine and complex drafting assignments, Coordi

I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.

Hard working and Dependable Environmental Professional

Eletro/Mechanical Technician, Applications Engineer

Pro Engineer 2+ years experience

I have an ability to grasp new concepts quickly and clearly to apply my knowledge and experience for tackling tricky situations.

Visual C++, C#, Visual Basic, Java, J#, Pascal, PROLOG Tools:1.Professional: Microsoft Visual Studio.Net, C builder, Java Visual Age, SQL Server 2000 2.User level: Microsoft Office, Visual Studio, Web Studio, Oracle 9i, Scripting and markup languages: HTML, XML, XSL, VBScript

I WAS DONE B=TECH IN MECHANICAL ENGG WITH 72% MARKS & ALSO DONE DIPLOMA IN MECHANICA;L ENGG & I HAVE ALSO THREE YEAR WORK EXPERIENCE

I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.

Experienced Automation/Process Control Engineer

1 year Wellsite Geologist/Mudlogger; 7 months experienced Varian Gas Chromatography; 2.5 years experienced Staff & Project Hydrogeologist and Environmental Field Technician

FRAMME (Intergraph), Microstation (Bentley Systems), Projectwise, C++, Microsoft Office, HTML, Matlab, AUTOCAD,

10+ Years Experience PLC Programming PC Board Testing/Repair Test Point Systems

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out