Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #39153 next resume »»
CONTACT INFORMATION:
View contact information...

SPECIALISATION
Industrial Concrete & Steel Structural analysis & design, foundations, concrete rehabilitation, explosion venting
Countries willing to work - Open

LANGUAGES English, Gujrati, Urdu, some Arabic

SKILLS
Civil Engineering: Analysis, design, construction and repair of reinforced concrete and steel structures.
Computers: Fluency in AutoCAD 2002, STAAD Pro, Mathcad, SAFE, MS Office, MS Project, Programming experience in dBase, Excel, developed several analysis & design aid modules.

EDUCATIONAL AND PROFESSIONAL STATUS
- B.Sc. (Hons) Civil Engineering, 1982: University of Aston, Birmingham, UK
- PE (Wisconsin, USA). Accredited: CCPE, Ottawa, Canada
- Professional Engineer, Pakistan Engineering Council
- Past Member, Instt. of Civil Engineers, UK.

EXPERIENCE RECORD
Aug '01 – present Sargent & Lundy LLC – Consulting Engineers, Chicago IL
Senior Structural Engineer, Fossil Fuel & Nuclear Power
Power Station structural design, inspections: retrofit to coal-fired to reduce NOx emissions:
- Marion (IL) Units 4,5&6: re-designed piled foundations SCR reactor supports to eliminate costly shear walls.
- Coffeen (IN): Retrofit for new air intake ducts, check & modify in-place steel for duct bumpers and supports, new truss retrofit for ash pipe.
- Gibson (IN) Units 2,3,4&5: New SCR units retrofit to existing station - achieved significant cost savings for Client thru critical structural analysis of existing structure.
- Poletti, (NY) 500 MW CCPP: principal design reviewer for civil / structural works, including construction support. Reviewed and altered numerous design and construction issues, achieved very few issues during support phase.
- Tennessee Valley Authority at Benton & Lowndes (TN): transmission substation structures & foundations - developed degree of automation & "off-the-shelf approach", for design cost savings.
- Marion (IL) inspection of corrugated steel circulating water lines, report & recommended shotcrete lining.
- Bellingham (MA): Assessment of crane girder built to defective calculations - satisfied client of girder safety.
- Dallman (IN): inspection of main air inlet ducts from ID fans to chimney.
- Sioux (IN): preliminary piling layout, achieved efficient layout despite headroom constrains
- Edwards (IL): designed explosion relief siding & blast protection for occupied areas
- Monticello (MN): nuclear power plant, evaluated cores thru reactor building.
- Fort Calhoun (NE): nuclear power plant, modifications for 100 Ton condenser tube bundle replacement & Turbine Building crane upgrade
- Baldwin (IL): rigging beams for HRH Pipe replacement,
- Vermilion (IL) - explosion venting, brick wall protection

Sept '88 – May '00 MOTT MACDONALD GROUP – Consulting Engineers (Incorporating Ewbank Preece Limited)
Resident structural engineer & incharge of CAD (Drafting) section:
Concept, design and detailing of:
- Desalination & power generation plant foundations and process / control buildings at 6 sites for U.A.E. Ministry of Electricity & Water.
- Pipe rack support systems for Oil Company, fuel tank bases, gantries
- Manholes, pits, trenches & culverts (single, 2-bore & 4-bore, and stop logs)
- Thrust blocks & valve chambers for buried pipelines
- Telecom company high-rise flagship buildings in Abu Dhabi, Sharjah and Al Ain
- Chicago Beach Hotel periphery buildings (pre-cast concrete)
- General foundations for petrochemical plant (skids & ancillaries)
- Flare & chimney foundations
- 33 kV & 11 kV overhead electricity transmission line poles including foundation using kicker poles
- Substation buildings (220 – 33 kV)
- Precast flooring for Duty Free Warehouse and GSE Complex at Dubai International Airport

Design & site supervision of:
- Telecom tower piled foundations & structure – approx 50 sites
- Gas Turbine installations (3 sites)
- Fuel storage tanks ; shell & ring foundations
- Telecom switchgear buildings (6 sites)

Design checks for:
- Telecom towers, masts & monopoles: upto 200m, over 150 sites, check for structure & foundations
(piles, pads & rafts)
- Overhead Transmission Line tower foundations for various Govt. projects.
- Flare installation technique

Structural concrete surveys & special projects:
- Crack investigations and delamination mappings of trenches, foundations, slabs, etc. Concrete deterioration survey involving potential surveys, dust & core sampling
- Site supervision of remedial works including skin repairs, surface improvement techniques and cost-control., structural analysis of cracked concrete sections for tanks at petroleum installations, control building, exhaust stack foundation.
- Site survey & "As-built" drawings for Aluminium smelter expansion, new Flour Mill, recreation club, Sea Port expansion
- Special investigation for tower failure – testing, analysis & report
- Damage investigation for culvert due to accidental loads, developed computer model of incident.

Sept '88 – May '00 (additional freelance work)
Engineering support: design & detailing of hotel, pre-cast units, bar bending schedules, sub-frame design, foundations. Produced drawings for fire-fighting systems, drainage, plumbing & HVAC layouts.
Production & alteration of drawings for road alignments, interchanges, and housing development layouts.

Oct 87 - Sep 88 ELECTRICAL ENGINEERING CENTRE, Doha, Qatar: Consulting Engineers
Drawing & document production related to electrical contracting works involving electrical cable laying & HV / LV panels.

Jan 85 - Sep 87 ALI ZAIN CONSTRUCTION, Karachi, Pakistan: Civil Contractors
Site Engineer - site supervision for steel re-rolling mill project (steel portal & rc machine foundations),
Motor showroom (rc flat-slab), and 65 low-cost housing units. Responsible for all aspects of construction,
Cost control and sub-contractor payments.

Sep 84 - Dec 84 DESIGN CENTRE, Karachi, Pakistan
Structural Designer - designing and drafting of R.C. structures including mosques, office buildings and shopping centres.

Jun 83 - Aug 84 (Freelance Engineer), Telford, U.K.
Surveying, setting out and supervision of various residential and commercial building sites.

Aug 82 - Jun 83 & Apr 81 – Sep 81 MCPHILLIPS LTD., Telford, UK, Civil Contractors
Junior Site Engineer: Setting out, surveying, site management of road, pipeline, earthmoving.

Apr 80 - Sep 80 JEC FAREBROTHER & PARTNERS, Birmingham UK, Consulting Engineers
Apr 79 - Sep 79 (University Sandwich Course Work Experience)
Junior Design Engineer: design & detailing of R.C. and steelwork structures. Site supervision work.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 351 to 400 of 1597)Go to Search Parameters...
Brief Description
LekCV
I am an electrical engineer working in Torrent Cables Ltd as electrical maintenance engineer since 1994. I have 12 years exprience. I have exprience of A.C drive, D.C. drive and other electrical instruments.
Aerdynamic principals, aircraft structures and analysis, systems engineering, experienced with MS Office, CATIA V5, ANSYS, and AutoCAD
Civil Engineer
Process Design and Commissioning of Raw Water Treatment Plant, Waste Water Treatment Plant, Demineralization water Treatment Plant, Tertiary Treatment Plants ,Solid and Hazardous waste management, Safety and Environmental Audits etc for mega oil Refineries and Petrochemical Complexes.
Enthusiastic Environmental Geologist with MS in Geology
I have seven years of experiences in the field of water well drilling as a hydrogeologist .
Autocad draughtsman 19 years mainly civil/structural experience
An engineering post-graduate with specialization in environmental engineering. Overall work experience of more than 14 years with majority in Petrochemical.Career Objective-To excel in the field of Industrial Environmental Management by virtue of knowledge, team work and self motivation.
A driven environmental major with positive outlook & expertise in business
I am a bilingual and experienced GIS professional looking for a challenging position with increasing responsibility that requires strong technical skills and proven leadership ability.
Over 10 years of environmental experience with same company! I can provide the following; • Phase I and Phase II Site Assessments • Asbestos inspections • Groundwater studies • Environmental assessment worksheets • Mineral analysis • Hazardous waste compliance audits
Process Engineer with experience in the design, commissioning and operation of a copper smelter. Worked for engineering firms on various projects for lead and zinc, gold, nickel/cobalt and sludge incineration.
In Geotechnics I ensured the supervision, the control and the establishment of design reports for several geotechnical investigations of large civil structures in soft and hard grounds : special foundations, retaining structures, soil improvement and reinforcement by geosynthetics' products,
Geologist and expert of GIS/Remote Sensing and Digital Image Processing
Bachelors degree in Electrical Engineering Technician. Interested in any position utilizing my degree. Very detailed oriented and committed to completion of projects. New graduate seeking employment.
I am currently looking for a position as a maintenance manager, supervisor, or engineer. I am a highly qualified maintenance professional have over 20 years of leadership experience in the manufacturing and production industry. I have obtained exceptional skills and experience in maintenance manage
position as an MEP Design management, Sustainable Design, LEED Facilitation, Building Commissioning, and Building Energy Modeling for High Performance Buildings.
30 years experience in civil and horizontal projects
Detail-focused and culturally-sensitive professional offering more than 20 years of increasingly-responsible experience. Track record of completing complex projects on time and under strict budgetary guidelines without sacrifice to overall project quality
Im an Mechanical Engineer I have full training and exposure in Safety Health environmental code Im fully aware of the OSHA, NFPA, the ISO 14000, ISo 18000, and the ISO 2000 im an auditor for safety health and environment also an inspector for HVAC facilities.
* Seven years concentrated consulting experience * One project was awarded the Grade II "Excellent Designing" by the Construction Ministry of China
Double French/Argentine Nationality Entry Level Environmental Engineer, fluent in Spanish and English languages, willing to relocate world wide. EIA preparation, ISO 14000, Environmental Management & Consulting, Bio diesel technology, etc.
OBJECTIVE Seeking a position with a consulting company as a consultant to utilize a wide background of environmental projects, experiences, and a strong background in computers.
My goal is to pursue a career in the geomatics industry where I can apply my skills to effectively communicate and present results through software customization, database management and maintenance, data analysis as well as continuing to learn new GIS principles and techniques.
PhD, CFD, Fortran, Matlab, C++, Fluent, Gambit, Tecplot, AutoCAD, ArcGIS
Chem Analyst - Laboratory Technician
CA licensed geologist (CEG&RG). More than 24 years of professional experience in engineering geology and environmental consulting in CA & HI, including 16 years as supervisor/owner. Currently self-employed with own environmental consulting firm in HI since 1992. Relocating to AZ (Tucson or Phoenix)
Ability to work in team with high collaboration Capable of achieving personal objectives as demonstrated by successful completion of my degree Excellent analytical and problem-solving skills Extensive experience with public conference and presentation. Good knowledge in radiation protection
Experienced in autocad ,microstation and manual drafting. 32 years in civil and structural design
Over five years of Mechanical Engineering experience in various organizations in US. * Highly proficient in development, design and analysis of Energy systems like Industrial Gas Turbine, Aero derivative Gas turbines, Fuel Cell Systems.
MA(ECONOMICS), PGDCA, HEALTH & SAFETY MANAGEMENT DIPLOMA, FIRE AND SAFETY MANAGEMENT DIPLOMA, FIRST AID DIPLOMA, CONSTRUCTION SAFETY CERTIFICATE, COSHH CERTIFICATE, SAFETY MANAGEMENT CERTIFICATE, OHSAS-18001-1999 HEALTH AND SAFETY INTERNAL AUDIT, ENVIRONMENT AWARENESS CERTIFICATE, MANUAL HANDLING CE
Civil Engineer expert in computer and water sector
More Than five years of professional experience in: Analyzing Business requirements. Usage of ArcGIS, ArcIMS, ArcSDE, ArcXML and ESRI based products.
Summary of Qualifications,Combined experience in Industrial Refrigeration Technician / Electrician Technician in the Pharmaceutical Industry,Petro chemistry, Building Management System (BMS), Ship Systems, Maintenance and Troubleshooting.
I have exp. 16 months as fire&safty supervisor, 18 months as a electrical technician
Fifty Years Total Experience in process engineering and technology development. Including More Than Twenty Years Process Engineering Experience on petroleum refinery, oil & gas production and petrochemical projects. Experience includes process simulation software Hysys/Pro II/Dynsim/Aspen.
Petroleum Geologist with 20 years international experience
Pro/ENGINEER, AutoCAD, SAS, Microsoft Office, MSC NASTRAN
A Mechanical Engineer with over 11 years of proven functional experience and can perform various roles in Manufacturing, Programming ,Design and Materials Procurement / Material Management.
I am the head of the laboratory at the moment. I have been working in the metrology field for 6 years and I deal with the following: preparation of gas mixtures by gravimetric and dynamic methods, gas analysis on GC, NDIR, FTIR and others. As the head of the lab I deal with clients.
LOOKING FOR A CHEMIST AND/OR ENVIRONMENTAL POSITION THAT ALLOWS ME TO APPLY MY 9 YEARS OF EXPERIENCE AND EDUCATION IN CHEMISTRY.
Experienced Industrial Structural Engineer - concrete, steel - 20+ years, UK & US codes
Exceptional performance as a Senior Process and Production Engineer for major industrial, polymer, refining, and specialty chemical manufacturing companies on the Texas Gulf Coast.
Diploma In Mechancial Engineering+NEBOSH Level-3+Environment, Health and Safety Management Specialist Certification from NASP of USA+ ISO 14001:2004 & 9000:2000 Certified Lead Auditor with 15 Years Experience in Oil&Gas as HSE Advisor/Engineer/Supervisor/Coordinator/
Wetland Studies, Wildlife Research, Environmental Assessment, Endangered Species Survey
I have: . Master's Degree in Geology . 4 years research experience . 2 years teaching experience . An impressive career of field works including mapping . Efficiency in sampling of rock and soil from outdoors . Extensive training and experience in laboratory.
Senior Structural Designer whom has been on both sides of construction. I started out on the tools and made my way into the design and engineering. Please review the letters of reference on my website. My background has always been an asset in the design office.
I have a 6 years diesel mechanic in kuwait and at present i am working in afghanistan as a Sr Wheel vehicle mechanic.
To be a part of a progressive organization that gives scope to enhance my knowledge, skills and confidence to achieve my goals with the combination of honesty, sincerity and hard work
1   2   3   4   5   6   7   [ 8 ]   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32  
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com