Resume - Industrial Projects CAD Operator

Misco Jobs

Resume #43539

CONTACT INFORMATION:
View contact information...

Conception & Developing Drawings for the execution of sites in Hydraulics Pumping stations & Purification Stations & Domestic waste Water Stations., Storage of Vaporizing depot, Industrial Tubing, Gas & Oil Circuit….
Conception & Developing Drawings for the execution of sites like hangars, des Cars Parking Lot, Pre-Engineered metallic Buildings & Industrial Hangers….
Drawer of Electrical Drawings.
Develop The Coordination Drawings To Detailed Specialties Drawings.
Measurement & Quantitative of Piping, Conditioning Ducts, Plumbing, Framework Structure & Pre-engineered Buildings.
Drawer of Civil-Works.
Shuttering.
Architectural in 2D & 3D Drawings.
Drawer Of Mechanical Drawings
P.I.D.
Isometrics.
3 Dimensioned Drawings.
Conditioning & Fluid.
Plumbing.
Industrial Mechanic Systems.
Metallic Framework.
H.V.A.C piping
Gas & Oil Circuits
Synoptic Model
Overall Drawings

COMPUTER KNOWLEDGE:
A good restraint of «CAO/DAO» Software as The AutoCAD all versions, Proclim 1, Proclim 2, Prolomb, Proplan, Solid Works, 3D Home Architect, Design CAD Pro2000.
A good restraint of the Microsoft Office Word, Excel, PowerPoint, Outlook, Microsoft Project, Microsoft FrontPage, Microsoft InfoPath and Many Others Software of images treatment as Photoshop, the Illustrator & Photo editor.
A good restraint of the 3D software like Solid Works, 3D Home Architect, Design CAD Pro2000, Micro-PID & a little bit of the 3D Max.
Installation of the data processing systems, the Data processing networks, and Debugging of computers in breakdown case.
A very good general computer literacy.

Education:
1980-1986: Primary Education in the Primary School of "Cité Menara" in Gabès.
1987-1997: Secondary Education in the Menara School of Gabès.
1997-31-05: Obtaining of The diploma of D.A.O. (an AutoCAD Operator) «Drawing Assisted by Computer» From the Private Training School the I.N.I.G.
During these 3 months I had accelerated courses on the AutoCAD R10.

1998-09-03: The Achievement of the Technical Courses and the Obtaining of The
Diploma as an Industrial Draughtsman, from the Training Center.
«Centre sectoriel de bâtiment et de forage a Gabes»
«The Sectorial Centre of building & drilling in Gabès»

TRAINING:
From June to August 1997: Training during My Studies with the S.E.R.E.P.T
«Société d'Exploitation et de Recherche en Pétrole Tunisien»
«Research & Exploitation Society in the Tunisian Oil»
In The district of Sfax. Concerning the rehabilitation of the offshore platform «ASHTART ».

Since October 01- 1999: Training with my actual company «NAFCO»
«Durant one year and since that date I represent one member of the engineering & drafting office until nowadays»

End of courses project:
Conception & Details Drawings Developing of an Indoor Sport-Room Built With The Framework Systems Entirely Metallic, with the supple steps, sanitary and plumbing installation, installation of a furnace.
Isometrics for the H.V.A.C Piping.
Process Instrumentation Diagram Drawings.
Piping Installation of the Furnace Drawings.
Framework Drawings.
Structural Drawing.
Electrical Drawings "Lighting"
Conditioning & Heating.
Plumbing Drawings.
Sanitary Drawings.
Synoptic Model.
Overall Drawings
Civil-Work Drawings

HOBBIES:
Sport (Basket Ball).
Painting (Particularly the water colour).
Playing musical instruments like Saxophones, trumpet & Guitars.
I appreciate the JAZZ, Swing, Blues, & Country Music.
Cinema.
Camping.
Sailing on Internet.
Decoration.
Language:

PROFESSIONAL EXPERIENCE:
Mayo 2005 to nowadays: NAFCO – North Africa Contractors (SBF Branch)
«Mechanical project draughtsman, in the engineering concept & drafting office –Supervisor».
-Changing the gas numbering system-
Changing of several gas numbering units in many sites of Tunisia.
It was about making the adaptation and the installation of 16 Gas numberings units system in several station of gas distribution in all the Tunisia. Our supplier of numbering units is IMTECH SYSTEMS and our customer is the S.T.E.G
Diameters & Classes vary between (6" 600 #RF/RTJ) and (20" 600 #RF/RTJ), pressures of service vary between the 20 bar and the 76 bar.
Conception and development of the following drawings:
Mechanical drawings (Piping & Tubing).
Fire protection network drawings.
Overalls Drawings.
P.I.D « Process Instrumentation Diagram ».
Bills of materials & quantitative.
Isometrics Drawings.
February 2005 to nowadays: NAFCO – North Africa Contractors (SBF Branch)
«Mechanical project draughtsman, in the engineering concept & drafting office –Supervisor».
- Gas-oil Transfer between Carthage Power Company & Sotrapil -
Supplying and installation a pump & a pipe-line between the two companies.
The two actual turbines situated in Carthage Power Company functions with the natural gas, and in the case of the gas cut there was as debugging fuel, two big diesel ferries, and seen that the cut of gas is rarely done, therefore Diesel should be filtered once every six months, which is the goal of our intervention. Our mission is to make this pipe-line that joins CPC with the Sotrapil, provided of a pump & an installation with a by-pass to assure the bidirectional way between the two companies to filter Diesel and give it back to the C.P.C.
Diameters & Classes vary between (6" 150 #RF) and (10" 300 #RF), pressures of service vary between the 10 bar and the 20 bar.
Conception and development of the following drawings:
Mechanical drawings (Piping & Tubing).
Fire protection network drawings.
Civil work drawings.
P.I.D «Process Instrumentation Diagram».
Bills of materials & quantitative.
Isometrics Drawings.
Supervision and follow-up the project on site.
July 2004 to nowadays: NAFCO – North Africa Contractors (SBF Branch)
«Mechanical project draughtsman, in the engineering concept & drafting office –Supervisor».
- Regrouping of the pumps Liquid Propane Gas in Butagaz Rades Tunis Tunisia -
Rearrangement of the pumping station of LPG for the replenishment in bottles & loaders.
In this project the existing installation was in two separated shelters each one contain two groups of pumps, the goal of our project was to regroup them in a new shelters of four pumps and a future pump to nourish two merry-go-rounds & the arm loader. All accessories (valves, pumps, check valves and PSV were restored in the new installation shelter.
Conception and development of the following drawings:
Mechanical drawings (Piping & Tubing).
Fire protection network drawings.
Civil work drawings.
P.I.D «Process Instrumentation Diagram».
Bills of materials & quantitative.
Isometrics Drawings.
Mayo 2003 to February 2005: NAFCO – North Africa Contractors (SBF Branch)
«Mechanical project draughtsman, in the engineering concept & drafting office –Supervisor».
- Construction of concentrates works -
The Jet's Pipeline between «Sotrapil Rades»&«Tunis Carthage Airport» in Tunis-Tunisia
To assure the better transport of fuel precisely the "Kerosene (Jet)" to nourish tankers in the oil zone of the International Tunis Carthage Airport, and seen also the security measures holds by the state to decrease the traffic of cisterns trucks that nourished the different petrol company in the oil zone of the airport, which was the goal of our mission to make a "Pipes Line" of diameter (6") that will assure the link the new station of "SOTRPIL" situated in Rades with the terminal of the new "SOTRAPIL" station situated in the Tunis Carthage International Airport.
- «Rades» Jet pumping Station- - «Tunis Carthage Airport» Terminal-

Wiper Station. Wiper Station.
Numbering Unit (Counter Unit). Numbering Unit (Counter Unit).
Filtration Unit Filtration Unit.
Booster Pumps. Open & Closed Drains.
Main Pumps. Networks Distribution.

Mechanical drawings (Piping & Tubing).
Fire protection network drawings & security drawings.
Civil work drawings.
P.I.D « Process Instrumentation Diagram ».
Bills of materials & quantitative.
Isometrics Drawings.
Electrical Drawing (Fire alarm, duct work, lighting, grounding, Synoptic)
Supervising & following up project on site.
December2002 to June 2003: NAFCO – North Africa Contractors (SBF Branch)
«Mechanical project draughtsman, in the engineering concept & drafting office –Supervisor».
- The Exxon Mobil store Company in Rades Tunis Tunisia-
Interconnection of the two stores « Exxon Mobil » Terminal 1& Terminal 2.
After the fusion of the two Companies "Esso" & "Mobil" it was obvious to make a tie between the two stores to exchange products, which was the goal of our mission to make the conception of a pumping station containing two pumps with an installation of a by-pass on every pump to assure the bidirectional way between the two stores, and three pipe-line of diameter (10" 300 #RF) and a length of 500 meters, and installation of a network fires has the pumping station.
Rehabilitation of the station of the loading arms trucks multi products.
Conception and development of the following drawings:
Mechanical drawings (Piping & Tubing).
Fire protection network drawings & security drawings.
Civil work drawings.
P.I.D «Process Instrumentation Diagram».
Bills of materials & quantitative.
Isometrics Drawings.
Electrical Drawing (Fire alarm, duct work, lighting, grounding, Synoptic)
Supervising the project on missions.
June 2002 to December 2002: NAFCO – North Africa Contractors (SBF Branch)
«Mechanical project draughtsman, in the engineering concept & drafting office –Supervisor».
The Project's Customer Is «The Tunisian Society of Electricity & Gas ».
-A new gas compressing station in Gabès with the Hanover Company.
It was about making the installation of three new huge gas compressors which each one produces a pressure that reaches the 76 bars; the site is situated on the gas distribution district in Gabès. Our supplier of compressors is the "HANOVER" Company.
Diameters vary between him (4" 300 #RF) and him (12" 600 #RTJ); pressures of service vary between the 20 bar and the 76 bar.
Conception and development of the following drawings:
Mechanical drawings (Piping & Tubing).
Fire protection network drawings & security drawings.
Civil work drawings.
P.I.D «Process Instrumentation Diagram».
Bills of materials & quantitative.
Isometrics Drawings.
Electrical Drawing (Fire alarm, duct work, lighting, grounding, Synoptic)
Supervising the project on missions.
Mars 2002 to September 2002: NAFCO – North Africa Contractors (SBF Branch)
«Mechanical project draughtsman, in the engineering concept & drafting office –Supervisor». -An oil store company – Blinding Unit-
Conception and arrangement of a new storage and replenishment station of oil. In these station four tanks of capacity reach 3000m3, and a stock replenishment station provided of an oven and a merry-go-round. All this replenishment station is covered with a metallic framework structure.
Conception and development of the following drawings:
Mechanical drawings (Piping & Tubing).
Fire protection network drawings & security drawings.
Civil work drawings.
P.I.D «Process Instrumentation Diagram».
Bills of materials & quantitative.
Isometrics Drawings.
Electrical Drawing (Fire alarm, duct work, lighting, grounding, Synoptic)
Details Drawings.
Frame work structure drawing.

June 2000 to December 2001: NAFCO – North Africa Contractors (SBF Branch)
«Mechanical project draughtsman, in the engineering concept & drafting office –Supervisor».
- The New American Embassy in Tunis Tunisia with the «Bill Harbert International Co»
In the synthesis office on the site of the United States embassy in Tunis Tunisia the grouping of our companies "Société Bouzguenda Frères" developed the contractual drawings for the execution on site and we've prepared all details of installation of all specialties.
Attending the supervision of the mechanical work on site.
Conception and development of the following drawings:
Mechanical Drawings.
Conditioning & Fluid Drawings.
Fire Protection Network Drawings.
Plumbing Drawings.
Sanitary Drawings.
Framework structure Drawings.
Coordination Drawings.
Mechanical Supervisor.
Mark-up (Folder for Customer).
As-built Drawings.
Process Instrumentation Diagram.
Measurements & Quantitative.
Electrical Drawing (Fire alarm, duct work, lighting, grounding).
April 1999 to Mars 2000: NAFCO – North Africa Contractors (SBF Branch)
« Mechanical project draughtsman, in the engineering concept & drafting office».
The site of swimming complex, of November the 7th sporty city of Rades in Tunis Tunisia.
The Tunisian government constructed an ambitious program of a new Olympic city in Rades, south suburb of Tunis. The program contains a stadium of football, a complex of swimming, a stadium of athletics and a village of dwelling.
The grouping of our companies "Société Bouzguenda Frères", as a project chief, has construct the swimming complex, which contain 2 covered & discovered Olympic swimming pools, of 50 meters each one, and a third discovered swimming pool of 25 meters for training. The entire complex is achieved according to the norms of the international swimming federation.
Conception and development of the following drawings:
Mechanical Drawings.
Conditioning & Fluid Drawings.
Plumbing Drawings.
Sanitary Drawings.
Framework structure Drawings.
Coordination Drawings.
As-built Drawings.
Process Instrumentation Diagram.
Electrical Drawing (Fire alarm, lighting, grounding.).
January 2000 to September 2000: NAFCO – North Africa Contractors (SBF Branch)
«Mechanical project draughtsman, in the engineering concept & drafting office –Supervisor».
- The S.S.T.C Site Fuel Storing Society, In Zarzis's Free Zone-
Products: Normal gas, Terrific Gas, Gas oil, Oil, kerosene A1,
Capacity of Storage: 60 000 m3
Pumping station of all products consists 5 pumps of a unit debit =120 m3/h
Islet of loading kerosene A1contain two bottom loading arms in source
Two islets of loading constituted each of five dome loading arms with meters
Station of pumping anti-fires composed of:
Two diesel pumps of an unit debit of 200 =m3/h
One electric pump of a unit debit of 200 =m3/h
Conception and development of the following drawings:
Mechanical drawings (Piping & Tubing).
Fire protection network drawings & security drawings.
Civil work drawings.
P.I.D «Process Instrumentation Diagram».
Bills of materials & quantitative.
Isometrics Drawings.
Details Drawings.
Frame work structure drawing.
Synoptic Model.
Electrical Drawing (Fire alarm, duct work, lighting, grounding, Synoptic)
Supervising the project on missions.
Various project & sites.
Projects with the National purification office « O.N.A.S ».
Conception & Realization of 14 waste water pumping stations of "Bizerte".
Extension of the purification station of "Sousse".
The new purification station of "Mateur" city in "Bizerte".
The new purification station of "Nabeul".
Rehabilitation of the purification station of South Meliane in "South Tunis".
The new purification station of the "Hamma" city in "Gabès".
The new purification station of the "Kourbous" city.
Several other waste water pumping stations in various sites in Tunisia.
Projects with the National Society of Exploitation & Distribution of Waters «S.O.N.E.D.E».
Extension Of the drinking water Treatment Station of "Belli" in "Tunis".
Construction of a pumping station containing three big pumps of an inlet diameter =24" & an outlet diameter =16".
Conception & Realization of 13 water Resumption Station of The Island of "Djerba" & "Zarzis" in the Tunisian south.
Projects with the petrol companies and hydrocarbons
Projects Of The extension of the SNDP to Rades "Tunis".
Store of the Asphalt in Sousse
Other Projects & offers Participation:
The new British embassy in Tunis Tunisia.
The new Qatar embassy in Mauritania
Extension of the terminal LPG in "Rades" by Constructing 3 gas storage spheres with «bs Engineering Belgium Co».
Of the various Projects with the "Tunisian Chemical Group" In the rehabilitation of the industrials zones of Gabès & Sfax.
A lot of projects with The National office of the purification «O.N.A.S». Such as the new the biggest purification station in all Tunisia in the west of the capital Tunis.
A lot of projects with the National Society of Exploitation & Distribution of Waters « S.O.N.E.D.E ».

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 1596)

Go to Search Parameters...

Brief Description

Big believer in teamwork, organization and co-operation, have the ability to perform well under pressure, hard worker, able to behave as a leader, manage stress.

I am available for all your open positions regarding my qualifications - Technical/Managerial/Projects positions, throughout Europe/Middle East & Africa.

I have held management/technical positions with the companies listed within my resume for over 20 years specializing in construction, environmental, mining, mineral/material processing and chemical manufacturing businesses. I have significant experience in all functional areas & P/L responsibility.

Construction manager, laborer, Class A CDL Drivers license, mechanic

Maufacturing Automation

I have work experience in United States, SE Asia, and China. I am a registered Professional Engineer (Civil) in State of California, USA. I am looking for a professional/managerial position in civil engineering/construction. Project experience and publications are available upon request.

Mechanical, electrical, structural maintenance & repair, estimating, project supervision.

Electronics Engineer exp. in OPTICAL FIBRE , RF, WIRELESS, PROJECTS ROLLOUT

I am a graduate in Chemical and Process Engineering.

Surveyor engineer, civil Engineer, quantity surveyor

My capabilities have been achieved through many experiences which include training and support of in-house staff in multiple locations, while working on concurrent projects as a Sr Designer/Project Engineer.

Telecommunication Engineer seeking a Summer Internship with high skills in wireless and broadband sector. Proficient in C,C++ and JAVA programming.

Executive Certificate in Workplace Health and Safety Manag ment

I am a plant and piping designer (PDS) - 11 year experience

see resume

Competent HSE Officer and registered with Department of Occupational Safety & Health Malaysia, Lead HSE MS Auditor with NCSB. Diploma in Occupational Safety & Health.

I can doa high level operation for most of equipments.

D.A.E. (Mechanical) 1970/3300 Second 1989

Qualifications in chemical process & equipment designs especially in energy and environmental industries, looking forward to enter marketing & procurement fields.

Reservoir characterization expertise including geological integration and interpretation of data (wireline logs, core, and seismic), petrophysical property modeling, geostatistics, geocellular modeling, and flow simulation. Proficiency with Petrel and other industry standard applications.

I am a Structure / Civil Engineer with 12 years expertise in Structure and infrasturctures for Petrochemical, Oil & Gas, CPO (Crude Palm Oil), Mining, Geothermal Power and Cement Projects

Dynamic professional with solid 22 years of experience in the shipping business and 4 years of experience in the document management engineering field, aims to respond to new challenges and contribute effective in the shipping and engineering field.

Both geophysicist and computer enginner with good skills and experience in mining and oil & gas industry. Seeking a challenging position with growth and responsabilities.

Leadership, teamworking skills, high communication and interpersonal skill, advanced analytical and problem solving skill

I am an experienced HSE Professional knowledgeable with program-procedure development and implementation, accident-incident prevention and investigation, root cause analysis, supervision, contractor compliance, security programs, medical programs, health and food programs, environmental programs

Highly organized, detailed oriented and self motivated Lead Engineer having 6 years of professional experience in the field of product development/sustaining engineering

Dedicated Cost Engineering Professional with exceptional project corresponding skills, multinational work experience and extensive abilities in Cost estimation, Quantity surveying, Claim analysis, Tendering, Contract administration, Cost monitoring/reporting, Schedule monitoring, Bid management, Bud

Managed three R&D labs, namely, Failure Analysis Lab, Mechanical/Metallography Lab, and Metrology Lab

Experienced Mechanical engineer as Tunneling specialist in operation,maintenance,construction tunnels and executing projects.

I have successfully managed a business for some time and then completed an applied geology course at the Camborne School of Mines, this was essentially a practically based course that introduced and developed many aspects of geology, mining and environmental management systems.

I would like to bring to your kind notice that I have got Ph.D in Hydrogeology, post M.Sc. (Tech.) in Hydrogeology, M.Sc Geology from prestigious Andhra University. I am having 15 research publications in National and International reputed Journals. I have Completed 2 major Research Projects

I am indeed looking for an opportunity to work as a Project Engineer as they are involved at every stage of development - from concept to development to production which would enhance my knowledge about a broad range of operations, with a chance of personal growth within the company.

Network Engineer MCA + 7 year EXP

work in the industries of chimical,

Engineer / EMS / SCADA / Electrical / Telecom / Power Sector

Computer networking, electronics services and repairs computer maintainace communication system and intercom. Electrical power system,control systems and automation. I am holder of a Liecentiate in electrical engineering and a certificate of enginnering in electrical and electronics enginneing

I worked with some Distillation Columns, Heat Exchangers, CSTRS, PFR, and Batch Reactors in the laboratory. In these laboratories we learned to put all the results into a report.

A dedicated and enthusiastic Master’s graduate in Control Systems & Instrumentation with two years job experience in the industry

MS in Environmental Engineering - Geo-Resources Emphasis ( 5years )+ Diploma of Specialization in Mining Sciences and Technologies (Post-graduate Research 3 years) - Freelance experience in QUARRY PLANNING-DESIGN and ENVIRONMENTAL ASSESSMENT (2 years)

GIS Analyst/ Geoscientist...M.Sc. Geology, M.Sc. GIS, Cert. Data Processing and Info Tech

To use my wealth of experience and full potential to contribute in a challenging organization.

Degree electronic engineer - 3 year expr. in industrial autoamtion - key skill PLc programming, SCADA developemnt; Robot programming; maintenance if industrial control system

Recent graduate, earned Advanced Environmental Technology Diploma. Please see resume for more information. If resume doesn't display properly, please email me at stiev42@gmail.com for a proper PDF version. Willing to relocate.

HR driver licence [Austr], Austr QF cert 3, Austr ESI cert 3, International switching Authorisation up to 88kv, Victorian line worker registration, WA licence for High Risk work, First Aid, Oh service testing [Metrel, NST], Safety blue card, EWP card, Internat Maint Electrician 4yr appy + 8yr exp

Industrial Projects CAD Operator

Mechanical-Piping Engineer - experienced in piping and procurement related activities for both offshore as well as onshore facilities

1. Mines planning engineer. 2. blasting engineer. 3. excavator incarge. 4. suppervisor. and 1. Bachellor of Engineering (Mininig Engineering). 2. Blasting Certificate.

1. Specialized in Occupational Health, Safety & Environmental Management System in Industrial Establishments & Enterprises; in Health Care Facilities and Biotechnology & Pharmaceutical Companies; 2. Expert in Risk Management & Loss Prevention and 3. Talented Trainer in Occupational Safety & Health

Fresh postgraduate in the field of Environmental Sciences.

I am a qualified and experienced Fire Safety person with more than 23 years of oil and gas experience. Worked in middle east, far east and in Africa. Can command and handle Fire Safety depatment of any set up

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out