Resume - Project Management / Inspection / Procurement / Quality Assurance

Misco Jobs

Resume #52004

CONTACT INFORMATION:
View contact information...

Education
MS Mining Engineering - Mackay School of Mines, University of Nevada, Reno 1988
BS Geology - Guilford College, Greensboro, NC 1979

Skills
Project Management / Inspection / Procurement / Quality Assurance
For: Light Rail, Heavy Commuter & Freight Rail / Heavy Civil / Tunnels, Mines, Plants.

Experience
Resident Engineer/Inspector - Rail Technology, Inc., Sacramento CA - 2000 to Present. Design Manager for heavy commuter San Jose to Gilroy rail expansion project. Project Manager for rail and special trackwork procurement contracts. Served as Resident Track Inspector for construction of ballasted railroad track, grade crossings, special trackwork, direct fixation track on aerial structures and in tunnels. Routinely handle project schedules, contractor's submittals & RFI's.

Project Manager - The Bartley Corporation, Silver Spring, Maryland - 1998 to 2000. Managed concrete construction projects. Implemented the safety program, estimated jobs and developed proposals. Provided hands-on job supervision.

Resident Engineer - Rail Technology, Inc., Sacramento, CA – 1997 to 1998. Project Inspection, Developed Safety Certification and Quality Assurance Programs.

Quality Control & Heading Engineer - Kajima Kiska, JV, Washington DC. 1996 to 1997. WMATA Green Line tunnel project in Washington D.C. Inspected concrete, monitored ground control grouting. Supervised line/grade control in shield a driven, concrete segment lined tunnel in difficult ground.

Field Engineer - Tutor Saliba Perini - San Francisco, CA 1993 to 1996
Staff engineer on the MUNI Metro Turnback Project for the SF MUNI subway. Two 18-foot-diameter tunnels were driven by a soft ground shield under compressed air using bolted steel liner plates. Produced plans and implemented extensive traffic detours in a downtown setting. Field supervision of labor and sub-contractors performing line/grade control, installing storm water pumping system, remedial bolting of the underlying BART tube steel liner plates, chemical grouting and jet grouting, ground settlement instrumentation.

Field Engineer – Stacy & Witbeck/Dillingham - San Francisco, CA - 1992 to 1993. SF MUNI South Embarcadero Rail Extension Project. Supervised track construction.

Mining & Tunneling Project Engineer
Mine Development & Engineering Corp. - 1989 to 1992. Served various contracts:
Morrison Knudsen/American Girl JV - Yuma, AZ – Supervised construction of two longhole drill & blast ore transfer winzes;
The Irvine Company, Newport Beach, CA – Served design team and provided supervision for a bolted steel liner plate tunnel under the Pacific Coast Highway in difficult ground;
Riverside County Flood Control and Water Conservation District – Served design team and supervised construction of a steel plate/ CIP concrete lined water tunnel under the Rt. 91 freeway;
Magma Gold, Ltd., Tucson AZ. - performed Mine planning for the McCabe underground gold mine near Prescott, AZ;
Valley Engineers, Fresno, CA – Supervised installation of drilled anchor tie-backs for a 36" diameter hydroelectric inlet pipeline on a remote section of the North Fork Yuba River, CA;
US Geological Survey, Carson City, NV – Supervised horizontal drilling from a shallow shaft in desert alluvium for placement of instrumentation to monitor migration of radioactive isotopes from US Ecology's hazardous waste facility near Beatty, NV.
Metropolitan Water District of Southern California and San Francisco Water Department.
Served as the CAL-OSHA Safety Representative supervising gas testers for construction and rehab projects in tunnels classified gassy and potentially gassy.

Mining Engineer - Homestake Mining Company - Lead, SD 1988 -1990
Mine Planning Engineer in the underground & open cut divisions and in mill operations and maintenance.

Underground Miner and Mine Geologist - Western Mine Development, Kingston, NV. 1983 – 1988. While enrolled in the Mining Engineering Program at Mackay School of Mines, Reno, NV. Served as miner, shifter, ore control supervisor for underground projects in NV and AZ.

Exploration Geologist - General Mineral Development, Reno, NV. 1981 - 1983. Supervised surface drill rigs and underground sampling for developing gold properties near Eureka, NV. Conducted surface sampling and mapping of gold prospect properties in Nevada.

Engineering Geologist - Cooper & Clark Consulting Engineers, Gillette WY. 1979 - 1981. Supervised drill rig conducting soil borings for railroad bed upgrade, construction and coal mine projects.

Certifications and Affiliations:
Professional Mining Engineer #010628, State of Nevada 1994
Member AIME-Society of Mining Engineers, Past Chairman of San Francisco Chapter.
CAL OSHA Safety Rep. #S51 96 / CAL OSHA Gas Tester #G123 96
MSHA 40 HR Safety Training Underground Mining
MSHA Instructor, Nevada Division of Mine Inspection
CAL OSHA Blasters License #7364 General Underground
MSHA Mine and Tunnel Rescue Training
BART Contractor Safety Certification

Supplemental Statement of Experience - Recent Rail Projects
William D. Baker

August 2005 - August 2006 C111 – Rail Rehabilitation at 1st & San Carlos St. $1.9M
Track Inspector on furnish / install contract for 115RE special trackwork embedded in San Jose city streets. Reviewed shop drawings and QA submittals. Conducted shop inspection and QA audit at Nortrak's manufacturing facility in Seattle, WA.

October 2001 – June 2005 C326 - Civil I SJ Diridon Station to Winchester $35.5M
Track inspector for installation of owner furnished rail and special trackwork for open LRT 115RE and Freight (second hand 133RE) track, paneled road crossings and a ballasted track bridge structure.

April 2002 – September 2003 C325 – Civil II Woz Way to SJ Diridon Station $17.7M
Track inspector for installation of owner furnished rail, special trackwork and DFF for open LRT track, paneled road crossings and a tunnel structure.

April 2001 – November 2003 May 2004 C225 – Capitol LRT Civil, Track &
Landscaping $48.1M
Resident Track Inspector for installation of owner furnished rail and special trackwork for open LRT track and paneled road crossings. Reviewed shop drawings and QA submittals, conducted field inspection and directed track inspectors.

January 2001 – May 2003 June 2004 C515 – Civil, Track and Landscaping (I-880 to
Hostetter) $22.9 M
Resident Track Inspector for installation of owner furnished rail, DFF and special trackwork for open LRT track, paneled road crossings and an aerial structure. Reviewed shop drawings and QA submittals, conducted field inspection and directed track inspectors.

April 2001 – December 2002 A110 – Concrete Ties $2.1M
Resident Inspector on procurement contract. Purchased ties for LRT 115RE rail to be used on various construction contracts. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspections and QA audit at CXT / LB Foster's manufacturing facility in Spokane, WA. Supervised inspection during unloading and final inventory at VTA's San Jose storage yard.

March 2001 – September 2003 A100 Running Rail $2.0M
Resident Inspector on procurement contract for new 115RE and second hand 133RE running rail and OTM to be used on various LRT and freight railroad construction projects. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspections and QA audits at LB Foster's manufacturing facility in Seattle, WA. Inspected second hand 133RE rail at LB Foster's lay down facility in Bliss, Id. Supervised inspection during unloading and final inventory at VTA's San Jose storage yard.

March 2001 – November 2002 A105 – Special Trackwork $2.2M
Resident Inspector on procurement contract for special trackwork, wood ties, concrete crossing panels and OTM to be used on various LRT and freight railroad construction projects. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspections and QA audits at LB Foster's and CXT/LBF's manufacturing facilities in Seattle and Spokane, WA. Supervised inspection during unloading and final inventory at VTA's San Jose storage yard.

June 2000 – May 2002 A324 – Special Trackwork for Woz Way/San Carlos $485K
Resident inspector on procurement contract for special trackwork. Purchased rail, DFF and OTM for an embedded LRT 115RE half-grand union. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspection and QA audit at ABC Naco's (now Nortrak's) manufacturing facility in Chicago, IL.

November 2000 – April 2001 A322 – Special Trackwork SJ Diridon Tunnels $127K
Resident Inspector on procurement contract for special trackwork. Purchased rail and OTM for 136RE freight/commuter rail turnouts. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspection and QA audit at ABC Naco's (now Nortrak's) manufacturing facility in Pueblo, CO.

January 2000 – July 2000 C510 – Civil, Track & Landscaping (Zanker to I-880) $7.9M
Track Inspector for installation of owner furnished rail and special trackwork for open and embedded LRT track.

January 2000 – April 2000 A822 – Special Trackwork (Zanker to I-880) $200K
Resident Inspector on contract to procure special trackwork – LRT 115RE curved crossover – from Progress Rail Services. Administered contract, reviewed shop drawings and QA submittals. Conducted shop inspection and QA audit at Progress Rail Services manufacturing facility in Sherman, TX.

March 1998 A810 – Running Rail $1.8M
Track inspector for procurement of 115RE rail and special trackwork. Inspected unloading and stacking. Conducted shop inspection and QA audit at Progress Rail Services DeCoursey manufacturing facility in Covington, KY.

March 1998 A840 – Concrete Ties $1.3M
Track inspector on procurement contract. Inspected unloading and stacking of Rocla ties made for various LRT projects.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 1527)

Go to Search Parameters...

Brief Description

Civil engineer, Water resource engineer, water, Hydrologist, Hydrogeologist, environmental management, environmental engineer

CADD GIS TECH

Safety & Environmental Specialist with excellent knowledge and experience. Please refer my resume with complete details available.

Mcsa, Mcse

Experienced Ops Engineer

Eco-friendly Architect, Revit, Autocad, 3D max, SketchUp, Photoshop, Flash, Coral-draw, Illustrator, Rhino3D.

Basic Soft Skills (Communication Skills, Presentation Skills, Team Working, Technical & Business Writing)

3rd Year Enviromental Technologist

Sales, Engineering Project Manager

Masters in Materials Processing & Engineering ,B.Sc. Chemical engineering ,Metals Testing (Destructive and NDT), Metallography, Heat Treatment Techniques, Structure investigation, Failure analysis, Technical report writing

Electrical Engineer with wireless, optical and integration expertise

Applying for the post of safety officer in your esteemed concern

Professional Engioeer

Experienced mechanical, civil engineer and land surveyor. Emplayed in mining, railroads, building, construction and other projects. Supervisor of other engineers and contractors. Plant engineer including hazardous waste. air quality and environmental health (OSHA).

Environment, safety, health, quality, security, international, lean manfuracturing, construction, operation, management

Mechanical Engineer with 7 years of hands on experience, A Qualified Lead auditor for ISO 9001:2000, ISO 14001:2004 & OHSAS 18001:1999

Automobile related

I am Masters Degree holder in Mineral Process and Diploma (PG) in Energy & Environmental Management

i have passed chemical engineering which is of 4 year and passed Environment protection Technician fron Centennial collge,Toronto.

I am a Chemical Engineering graduate having 17+ years experience in the field of Safety, Occupational Health &Environment.

Prevent / correct unsafe acts & condition.

I have completed my M.Tech. in applied geology from the Indian Institute of Technology Roorkee presently working as a Manager Geologist in DGDC Ltd.,I am looking for a job of Geologis ,

Project and maintenance work experience in power generation, transmission and distribution , steam raising plant,,,large power transformers, AC motors, DC motors and drives ,power factor control equipment, energy management systems, (PLC) & SCADA , Instrumentation and Control Engineering

Emergency Response Manager Trainer and Health & Safety professional: NEBOSH, Tech IOSH (NASP) Certified Safety Auditor, Certified Health & Environmental Management Specialist 2005/2006 and other technician certificates. 12 + Years HSE experience, 30 + years overall experi

I am 26 years old engineer of hydraulic and searching for traineeship in companies in Germany, Austria, Italy to get more and better experiences in my field of work and to grow in knowledge.

Nace certified coating inspector

Quality Management, ISO 9001, ISO 14001, OHSAS 18001, Lead Auditor of IRCA, TUV-CERT

Manager / Engineer ( HW/SW/QA/Training )

I am a Mechanical Engineering Graduate with 12 Years experience in Medium size Production units - Forging Industry & Foundry.Experienced in Quality Assurance , Production Planning,Marketing.Sound Knowledge of ISO procedures.

Bsc of science

Civil and Environmental Engineer: Water and Wastewater, Process, Safety

Senior Civil Engineer, 16 yrs experience, EPCM, large scale infrastructure, O&G, Water, Mining and Mineral Processing Sectors

I am having my bachelor degree in Civil Engineering and Masters in Geotechnical Engineering from top rated technical institutions of India. Also I have 3 years of working experience in EPC environment. I worked as Design Engineer (Geotechnical) in Larsen & Toubro Ltd., (www.lntecc.com).

Project, Operation,Logistics, Site & General Management Expertise, Excellent communication & negotiating skills, ability to evaluate, prioritise & act on issues. A proactive attitude, hands on approach & a successful problem-solving manner. Strong financial organisational, logistical, planning .

Metallurgist and MBA with expertise in reducing costs associated with wear, maintenance and repair. Skilled at business analytics and internet savvy.

Marine + International Projects Oil & Gas

15+ years of Senior Project Engineer and Corporate Industrial Engineering Manager experience with a strong background in Supply Chain Logistics that has saved tens of millions of dollars.

Biologist/Environmental Scientist

B.Sc. in Environmental Engineering; M.Sc. in Engineering Management; ISO9001, ISO14001, OHSAS18001; EIA reports; EMMPs; translation (English / Turkish); MIDSS; management

Conducted individual and group tutorials for Project 350 mathematics courses

I am a fresh chemical engineer with spelization in alcohol technology

I am Mechanical Engineer, with great experience in diesel and gasoline engines,heavy machinery, Forklifts, Excavators, hydraulic systems,fluids transportation,Compressors, Gas Turbines (Aviation), Steam Turbines, electric generators,machinery purchase,maintenance schedules

Surgical Emergencies :- Road Traffic accident, crush injuries, blunt trauma abdomen,Head injury, liver tear, gunshot, spleen rupture, face injuries, stab injuries, spinal cord compression, assult injuries, burn injuries etc.n Medical Emergencies :Myocardial Infraction, COPD, sun stroke, snake etc.

Corporate Executive in Information Technology with extensive international experience in Systems/Product Architecture (Analysis & Design), Program/Project Management, Business Continuity Disaster/Recovery Planning, Technical Service Delivery & Support, Technical/Operations Management

Over 14 years of total experience in the industry of which 8 year’s industrial experience as Chemical Engineer. This is backed by 6 years of experience of implementation of Intergraph’s Plant Design System (PDS) software. The domain of PDS expertise comprises of piping and structural modeling, extra

hse&ff certificate EU valid civil defence certificate, able to work among multinational teams. self starter, dinamic,

Electrical Engineer- Masters Degree 3+ years Experience

I am looking for a job as Technical Manager for heavy machines worldwide

Equipment Fabrication and Equipment Purchasing, Procurement, QA and QC, Mining, Power

Project Management / Inspection / Procurement / Quality Assurance

1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out