Resume - A Uk based professional Chemical/ Process Engineer with 20 years experience in v...

Misco Jobs

Resume #5203

CONTACT INFORMATION:
View contact information...

Specialist environmental equipment and plant supplier (SBR's, aeration, composting). Short term contract Process Engineering work and consultancy.

• Contract Manager at Texaco's Pembroke Refinery. Responsible for the man management, process and maintenance of the waste water treatment plant and sludge processing facilities. Responsible for co-ordinating and overseeing the sales of Nalco process chemicals (corrosion inhibitors, de-emulsifiers, por point supressants, flocculants, coadgulants) throughout the refinery (£1.6m /annum).

• Senior Design Consultant for Southern Water Working in a group of consultants on the feasibility for the construction and extension of sewage works to meet the tightening consents on quality of final effluent.

• Wardell Armstorng Consultants Preparation of feasibility study for the construction and operation of a Centralised Anaerobic Digester in Stoke-on-Trent.

• Stam Ltee, Mauritius. Prepared the FEED study for the construction of a landfill leachate treatment facility.

• 2000 - Winner of BIO-WISE Demonstrator Project competition, in conjunction with University of Leeds and Selden Research. Project for the biological treatment of waste water from a chemical manufacturing plant using a Sequencing Batch Reactor.

• Negotiated representative's agreement with a US manufacturer of process equipment. Sole representative in the UK and Europe for unique environmentally related processes and equipment.

• Obtained a grant from the DTI for the development of a novel effluent treatment process. This project was done in conjunction with Staffordshire University.

• British Nuclear Fuels Engineering. Member of the Process Engineering section of the project team working on the Sellafield Drypac Plant. Producing the Process Design for the £410 m plant. This plant is for the treatment of a radioactive sludge composed mainly of magnesium hydroxide. Duration of work was 1 year. Activities included preparation of Process Descriptions, Process Flow Diagrams, Engineering Flow Diagrams, Process Data Sheets, Instrument Process Data Sheets. Equipment sizing and specification. Interfacing with suppliers on development and design work. Conducting design and safety review meetings.

• Knight Piesold, Working as an associate, providing Process Engineering Produced a preliminary process design and cost estimate for the treatment of minewater and subsequent sludge processing facilities for Las Crusas, Spain.

• Knight Piesold, Working as an associate, providing Process Engineering. Technical services for process evaluation for the Active Treatment Design Report – Wheal Jane Minewater Project.

EXPERIENCE PRIOR TO FORMING ZYLO TECHNOLOGY

DORR-OLIVER Co Ltd October 1993-September 1995

Contractor/process equipment supplier. Active in Minerals, Chemicals, Pulp and Paper, Pharmaceuticals, Municipal Effluent and Industrial Effluent Treatment. Projects up to £20M in Fluidised Bed Incineration, Filtration, Thickening, Dissolved Air Flotation.

Business Manager - Environmental Systems October 1993-September 1995

Development and running of the Industrial Effluent Treatment Business. Tendering, negotiating, developing marketing strategy, Project Management.

• Developed a phosphate removal process from wastewater for Eli Lilly Pharmaceuticals, Cork.

• Approached by Dorr-Oliver to take the position.

• Implemented Failure Mode and Effect Analysis as a means to improved project execution.

MONSANTO plc

Batch Fine Chemical Manufacturer June 1992 - October 1993

Senior Project Engineer June 1992 - October 1993

Project Management and Cost Control. Development of Front End Packages, Premise Documents and Detailed Designs. Working in a TQM environment. Preparation of an application to the HMIP for the authorisation of a prescribed process under IPC.

• Successfully installed projects for acetone scrubbing vents and the pastillation of a molten polymer.

• First Project Engineer in Monsanto Europe to fully utilise CPM (Capital Project Management) on Pastillator project.

• Liased with and visited Monsanto joint venture in Korea during the Pastillator project.

AUGHINISH ALUMINA LIMITED (65% Alcan, 35% Billiton)
High temperature Bayer Process Alumina Refinery

Section Engineer June 1990 - June 1992

Responsible for process and maintenance within section. Supervision of two Engineers and a Technician. Processes within section included Counter-Current Decantation and Washing of red mud, red mud disposal, Multistage Evaporation, Effluent Treatment and Crystallisation,.

• Instrumental in implementing ISRS in Section (International Safety Rating System)

• Solved refinery water balance problems by installing new procedures for setting wash water control philosophy.

• Reduced section maintenance budget from £3.5m to £2.5m in two years.

• Deputised for Section Manager (73 employees in Section) Resolved labour dispute.

• Represented Aughinish at Alcan International Conference in Montreal on red mud and presented two papers.

DORR-OLIVER EUROPE March 1984 - June1990

European Industry Manager Designate for Pulp and Paper

Process and marketing support for sales of recausticizing plants (up to £3M), pulp filters and screens

• Youngest ever Dorr-Oliver Industry Manager.

• Award for outstanding performance.

Senior Process Engineer/Process Engineer/Applications Engineer

Laboratory and pilot testing (Thickening, Filtration, Effluent Treatment processes), mechanical design of process equipment, commissioning, specifying of ancillaries in projects.

EDUCATION

9 'O'-levels, 4 'A'-levels Chesterfield Grammar School
B.Sc. Honours in Chemical Engineering, University of Newcastle upon Tyne
Chartered Engineer
Member of the Institution of Chemical Engineers

COURSES INCLUDE

Many in Solid/Liquid Separation and Waste water

Monsanto Management Style
Capital Investment Appraisal
HAZOP
Full training in Total Quality Management
Centrifugation
Numerous papers (UK. Germany USA)

PERSONAL

Date of Birth 28th June, 1961 - Married - Two Children

INTERESTS

Caving - Swimming - Cycling – Jazz

LANGAUGES

French - - Spoken Fair
Written Basic

German Spoken Fair

SPECIFIC PROJECT EXPERIENCE 1984 to DATE

2003 Texaco Ltd, Pembroke, Wales Process Consultant for projects to tackle waste arising from processing DOBA crude. These were a heavy metals removal facility; incubator for nitrifying bacteria and carbonaceous substrate dosing. Additional process and project engineering for the refurbishment of API separators and the installation of a feed tank for the dewatering centrifuge.

2002 Wardell-Armstrong, Newcastle-under-Lyme. Feasibilty study for the construction of a Centralised Anaerobic Digester at the Chatterley Whitfield Mining Museum site in Stoke-on-Trent.

2002 Stam Limited, Mauritius. Front end Process Design for a landfill leachate treatment plant.

2001 Selden Research Ltd, Buxton. Design, supply and installation of a Sequencing Batch Reactor to simultaneously operate with anoxic and aerobic conditions in the same reactor. Following laboratory tests the design and specification of a full scale plant will be undertaken. Laboratory tests will be undertaken by Aqua Enviro at the University of Leeds

1997 to Imerys (formerly English China Clay International) Replacement of gearbox
2000 (centre drive) on 140 ft diameter clay thickeners.

1999 Lundbeck Pharmaceuticals, Teeside. Instigated testwork to evaluate the use of Sequencing Batch Reactors to treat wastewater from a pharmaceutical factory. Testwork carried out at Leeds University on behalf of Zylo Technology.

1998 Camp Bros. (Café) Ltd. Scotland. Instigated testwork to evaluate the use of Sequencing Batch Reactors to treat wastewater from an ice cream factory. Testwork carried out at Leeds University on behalf of Zylo Technology.

1998 to Knight Piesold, Ashford, Kent. Provided consultancy services on process design
2000 for the Wheal Jane Minewater Project.

1997 Knight Piesold, Ashford. Produced a preliminary process design and cost estimate for the treatment of minewater and subsequent sludge processing facilities for Las Crusas, Spain

1997 Lyons Maid Nestle. Conducted laboratory and pilot scale testwork to establish the treatability of wastewater by a Sequencing Batch Reactor

1995 British Nuclear Fuels Engineering Limited, Salford. Sellafield Drypac Plant. Process for screening and sorting radioactive silo contents (sludge and swarf).

1995 Aughinish Alumina, Limerick. Seed hydrate dewatering on large diameter vacuum disc filters. Prepared the Front End Design package and tender documents.

1995 Pfizer Pharmaceuticals, Sandwich. Front end design and tender for jet aerators, pipework, compressors and control equipment for activated sludge plant

1995 Texaco, Pembroke. Dissolved Air Floatation to remove oil from refinery wastewater. Pilot testing and Front End Design preparation

1994 Knight Piesold, at Wheal Jane Mine Cornwall. Initiated testwork to prove residual cadmium levels in treated minewater.

1994 Eli Lilly, Cork. Testwork to define a phosphate removal process from wastewater. Test report used to demonstrate BATNEEC to Irish EPA. Front End Engineering Package prepared for Eli Lilly. Thickener designed and sold.

1993 Monsanto, Wrexham. Project Engineer in plant manufacturing fine chemicals by batch processes.

1991 Aughinish Alumina, Limerick. Process definition for effluent treatment plant. Neutralisation, sedimentation and centrifugation of settled sludge. Hydrocyclone studies for hydrate thickening. Also commissioning of a Horizontal Belt Filter for the dewatering and washing of oxalate crystals.

1989 Laporte Inorganics, Widnes. Part of the commissioning team for two stage lime neutralisation and two-stage sedimentation process with underflow recycling.

1989 Cotton Valley Sewerage Treatment Works, Milton Keynes. On site tests to demonstrate improved underflow on Primary Clarifiers using diaphragm pumps.

1989 Reynolds Metals, Corpus Christi, Texas. Laboratory testwork to size and specify a Horizontal Pan Filter for dewatering and washing Alumina Hydrate.

1988 Acna Chemie, Genoa, Italy. Troubleshooting and modifications for chemical manufacturing process using Rotary Vacuum Filters.

1988 Alicel, France. Commissioning team on recausticisation process for Kraft pulp mill. Lime slaking, causticizing, dregs filtration, green liquor Clarification, lime mud filtration, white liquor filtration.

1988 British Sugar, Peterborough. Development of a novel approach to brown stock washing on proposed straw pulp mill.

1988 Hickson and Welch, Castleford. Laboratory based testwork on effluent coagulation and flocculation and neutralisation. Precipitated sludge then used to perform thickening tests and dewatering by filtration.

1988 Interalumina, Venezuela. Conducted site based testwork to size Horizontal Pan Filters for the deliquoring and washing of seed hydrate.

1988 British Steel, South Wales. Laboratory testwork and commissioning team for two-stage neutralisation of acid water using lime with underflow sludge recycling. Thickened sludge was subsequently pressed.

1987 Interalumina, Venezuela. Conducted site based testwork to prove performance of a Rotary Vacuum Filter in comparison with gravity thickeners.

1986 Tioxide France, Italy, UK and USA. Site based pilot tests to prove operation of the Press Belt Filter for the dewatering of titanium dioxide.

1986 Deanshanger Oxides, Milton Keynes. Testwork for the sizing and specification of a Press Belt Filter and a Horizontal Belt Filter. Commissioned the equipment.

1985 British Coal, South Wales and Yorkshire. Commissioning of two Horizontal Belt Filters for the dewatering of coal fines.

1985 May and Baker, Norwich. Effluent neutralisation tests using milk of lime and subsequent sedimentation testing.

1985 Corleone, Sicily. Pilot ultrafiltration tests for concentrating citrus oil.

1984 Jahncke Fruit Juices, Hamburg. Conducted lab and pilot ultrafiltration testwork to define process. Commissioning of the full–scale process.

PAPERS, PUBLICATIONS AND PRESENTATIONS

"Treatment of Effluent from a Small Industrial Cleaning Manufacturer using SBR Technology"
Presented at Biennieal Conference on Management of Wastewaters
April 2002, The Carlton Highland Hotel, Edinburgh, Scotland

"Sequencing Batch Reactor Technologies – Packaged Systems for Small Communities"
Presented at conference entitled "Sewage Treatment Strategies for Coastal Areas and Small Communities"
December 1999, Edinburgh Conference Centre, Scotland

"Environmental Biotechnology"
Presented at Biowise Seminar run by DETR
April 1999, Nottingham, UK.

"Sequencing Batch Reactors for Small Applications"
Presented at a course entitled "Sequencing Batch Reactors 2"
September 1998, University of Leeds, UK.

"Tightening the Paper Mill Water Circuit Using Wedge Wire Screens"
Paper Industry Technical Association Symposium on the Environment.
April 1995, Maidstone, UK.

"Selection and Scale Up of Continuous Filters - Experimental and Calculation Procedures".
Presented at the Filtration Society 30th Anniversary Symposium.
September 1994, Birmingham, UK.

"Treatment of Mixed Effluent from a High Temperature Bayer Process Alumina Refinery".
To have been presented at a conference -"Waste Water Treatment in the Process Industries".
September 1992, Birmingham, UK. The conference was cancelled.

"Aughinish Alumina Mud Stack and Storm Water Management"
"Red Mud Filtration, Viscosity Reduction and Pumping at Aughinish Alumina"
Both presented at "Mini Symposium on Red Mud Handling".
October 1991, Alcan Headquarters, Quebec, Canada.

"The Development of New Applications for the Vacuum Drum and Press Belt Filter".
Presented at 5th World Filtration Congress
May 1990, Nice, France.

"Vacuum Filters for a Wide Range of Applications in the Bayer Process".
Presented at the TMS Conference.
February 1990, Los Angeles, California, USA.

"New Horizontal Belt Filters for a Wide Range of Applications".
Presented at the Filtech Conference.
September 1989, Karlsruhe, Germany.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 1513)

Go to Search Parameters...

Brief Description

Qualified and experienced professional in hydrology system modeling and engineering project management. Seeking to attain a challenging position that provides responsibility and management in a research or engineering environment where I can be actively involved in solving environmental issues.

Mechanical Senior Designer UG NX3

Environmental Engineer with Background in Hydrogeology and Geology

Skilled writer with marketing, engineering, and math background. Based in metro Seattle, but will work in other locations. Two graduate degrees; two published novels. Can use Adobe Frame Maker, Microsoft Word, and other authoring tools.

A Uk based professional Chemical/ Process Engineer with 20 years experience in various aspects of Plant Operations and Design. Looking for ex-pat status or home based job/contract. Special interests include Environmental Engineering, solid/ liquid separations and wastewater treatment.

20+ years Civil Engineering experience on Public Works, Utilities, Industrial, Commercial and Residential projects. Experienced in streets, highways, water systems, sanitary & industrial sewers, airports, site development, grading, drainage, underground piping and specifications

Hydrogeologist

Experienced Environmental/Mining Geologist with extensive hands-on experience in both geological and geotechnical data gathering systems. Field work includes the collection, processing and interpretation of air quality data for mold, and asbestos. Excellent communication and writing skills.

I am a grduate in Civil Engineering and having an experience of 34 years as Civil Engineer.I have acquired Diploma in Computers in Office Management in the year 1991 and utilised M.S.Word &Excel while sending formats to World Bank,New Delhi on behalf of Energy Sector.

I have more than 15 years experience in safety and environmental policy implementation for construction sites, drilling, workovers and explorations, refineries, pipelines, shipyard and onshore/ offshore oilfields installations.My last assignment was with Spie Petrofac International Ltd., for world’s

Refining and petro chemical environmental specialist

HNC Qualified Engineer with an extensive experience in a broad cross-section of engineering, predominantly structural/mechanical civil/building services, familiar with all aspects of project management. I.e. planning, cost control, tender evaluations, contract law, health and safety.

Attain a professional position in water-wastewater engineering and bio-chemical treatment processes to use and develop skills valuable to the professional practice of environmental engineering

VoIP endpoints, IP Agent, Avaya Communication Servers, MS Office Suite, Network analyzers

Environmental management, particularly with respect to major construction projects – developing environmental systems, inspection, monitoring & implementation.

I am an engineer with over 20 years experience in the Middle East Region. I hold an M.Eng in Environmental Engineering and an MSc in Agriculture Irrigation. I am fluent in Arabic, French and English.

Senior Geologist with expertise in applied geology (geology applied to mining including blasting, slope stability, hydrogeology, reclamation, etc), research, evaluation and communication skills. Preference is contract or project work.

*Knowledgeable of a broad base of local, States and Federal regulations: including DOT, OSHA, States R-T-K, VOCs, HAPs, TSCA, EPCRA, CERCLA, SARA, confined spaces, hazardous/non-hazardous wastes including waste reduction, worldwide inventory status, etc.

Metallurgical/Environmental/Maintenance/Process/Project engineer with 30 years experience in hydrometallurgical, mineral processing, process, project, maintenance, environmental, lab, computers and budgeting.

Master degree in Environmental Health, More than 15 years working in environmental Health field.

I AM A MASTER STUDENT IN WATER ENGINEERING FIELD. I HAVE ABOUT 8 YEARS EXPERIENCE IN WASTEWATER INDUSTRIES. I CAN WORK INDEPENDENTLY AND GROUP WORKING.

Five years experience on various aspect of remote sensing and GIS techniques in groundwater exploration, land use mapping , 3D analysis etc from satellite data,

I have completed a graduation degree in electrical engineer and doing Master degree in electrical by availing study leave from the railway , because i am pemanent employee of India rail working at the post of section engineer (power supply ) and train lighting

I have over ten years of experience related to construction, operation and management of hazardous and solid waste management facilities, environmental site assessment, environmental impact assessment, technology evaluation. Currently I’m completing a master degree of Environmental Engineering

I am a Senior Environmental Project Manager (> 12 years experience) specializing in Environmental Remediation and Construction Management. My areas of expertise include project management, construction management, scheduling, document control, cost control, quality assurance, and quality control.

I am a Graduate of ENvironmental Engineering with PG Diploma in Industiral Pollution Control and MBA . I am having 16 years of experience in Environmental Engineering field in petroleum sector. I am EMS Lead Auditor too.

I have ample experience in foundation investigation of dam sites, road allignment, building sites and slope stability assessment studies.

12 years total in the telecommunications field. Currently working in a NOC testing, troubleshooting, building and initiating DS1, DDS, frame relay, IP, SS7 and voice circuits.

I am a Hydrogeologist/Aqueous Geochemist. I hope to utilize my problem-solving skills, analytical abilities, and knowledge gained through working experience in providing innovative solutions to the company’s operations. I hold a PhD from New Mexico Tech in the area of Environmental Geochemistry and

M.SC environmental sciences+ IOSH_MS+ISO 14001+COMPUTERS

Design and Fabrication/drafting Plans/various design of industrial equipment

Safety engineer

Expertise in hydrological analysis and design, river engineering studies, analysis of sediment transport and river morphology, river modelling with MIKE 11 and MIKE 21C, water management with people’s participation. Excellent managerial and communicative capabilities as well.

PE with 13 yrs exp in petroleum ind, gov research, eng consultancy, proj manager for RCRA/CERCLA programs for the U.S. Air Force. Past 6yrs managed the tech proj planning, budgeting, cost estimating, contract proc/admin, and contractor oversight for the execution of eng invest, const and O&M projs.

Doctorate degree in the field of Environmental Science with five years experience in research and development and five years experience in teaching, education, administration and academics.

Technical sales, Technical support, presentation, negotiations,

Environment Specialist at an environmental consulting firm engaged in the conduct of EIAs, Feasibility Studies and Environmental Due Diligence and various environmental consulting services

Environmental hydrogeologist with great expierence in assesment and remediation of ground water contamination

Mechanical Design, CAD-Pro/E, Unigraphics, Ideas

A highly talented Environmental Engineer with 10 years of involvement in identifying sources of environmental pollution, preparing reports, recommending corrective measures to Control and Remediation of Environmental Health Hazards.

Marine Engineer---Second Engineer

Qualified and experienced mold cum product design executive with extensive experience gained from consumer electronics and automotive industries molding requirements. Experienced in meeting strict deadlines through personal commitment

AutoCAD-2000/004 (X-ref, Xref-Manager, Model Space, Paper space, 3D Modeling, Animation, Working in layers) drawing.

Basically Hydrogeologist, working on land and water resources development and management from last one decay. I am Doctorate in Geology and Post graduation in Applied geology, working in RRL (CSIR), Bhopal India which is Min. of science & Tech., Govt. of India.

Engineer with 10 years of experience is looking for a job as infrastructure and/or environment engineer on planning, design, supervision or construction of international projects that are a challenge due to tight schedule and big pressure. Any where in the world.

I have post graduate degree in Environmental sciences from Canada. I also have a Masters degree from Hungary in trasportation engineering (Civil). I worked in Europe, Asia, Africa and Canada as well. I speak four languages (English, French, Hungarian and Bengali). I have 12 + yrs. of experience.

Senior Project Manager

Electro Machanical Technician ,packaging PLC.1 /2/3

I am looking for Hydrogeologist/Computer Modeler Position I have PhD in Fluid Dynamics, solid background in Numerical Methods, and broad experience in computer modeling in area of Civil and Environmental Engineering

Manager of proposals and technical support to marketing experience 5 years. Experience in Latin America and Middle East. Project manager experience 15 years: wastewater treatment plants, power plants, solid waste facilities. Excellent technical writing, computer literacy

1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out