Resume - I have experience in researching well and lease records for petroleum prospect m...

Misco Jobs

Resume #55117

CONTACT INFORMATION:
View contact information...

OBJECTIVE:

I would like to obtain a position with a company involved in petroleum exploration, drilling and production.

WORK EXPERIENCE:

I have the following experiences:

- Research well record and lease records from state surveys and county courthouses
- Interpret well logs and correlate lithologies stratigraphically
- Make various isoclinal maps such as structural, isopach, and porosity
- Analyze well production curves and recommend solutions to enhance the production of petroleum
- Set up a lease for the production of petroleum
- Well site geological services
- Determine mineralogy and morphology of samples via a petrographic microscope
- Identification and analysis of clay minerals through the use of an X-ray diffractometer
- Use Rockware software to produce maps, profiles, models, statistical analysis, volumetrics, etc.
- Use Logit software to produce interpretive well logs
- Operate gas chromatograph
- Perform various geophysical field tasks including: reflective and refractive seismology, electrical resistivity surveys, and magnetic survey analysis

-I am presently working as a geologist/ mud logger for Selman and Associate, Ltd. and as a consulting geologist, researching and mapping prospects and performing well site/ mud logging services.
- Worked as a geologist in a personal/ family venture in the Illinois Basin where I was actively involved in the location, drilling and subsequent production of petroleum, and manually setting up and operating the lease
- Worked as a geologist for Kimberly-Clark Corporation overseeing and developing their mineral rights holdings in Wisconsin (massive sulfide), California (geothermal), Georgia (kaolinite), Michigan, Louisiana (oil and gas), and elsewhere

EDUCATION & CERTIFICATION:

Master of Arts in Geology: Indiana University Graduate School, Bloomington, Indiana. G.P.A 3.60/ 4.00
Bachelor of Science in Geology: Eastern Illinois University, Charleston, Illinois.
G.P.A. 3.72/ 4.00
Eastern Illinois University Geology Summer Field Camp: South Dakota School of Mines, Rapid City, South Dakota.
Geology of Wisconsin: University of Wisconsin Oshkosh

MASTER'S THESIS:
The Mineralogy and Physical and Chemical Properties of the Porters Creek Clay

- Researched the stratigraphy, mineralogy and economic attributes of the Porters Creek Clay of the Mississippi Embayment area
- Collected samples from various clay pit operations in Illinois, Missouri, and Tennessee
- Analyzed the mineralogy, morphology and chemistry using such equipment as the X-ray diffractometer and scanning electron microscope

STUDENT RESEARCH ASSISTANTSHIP:
- Prepared samples of industrial minerals
- Ran tests using a high intensity electromagnetic separator

SOFTWARE SKILLS:

I have a good working knowledge of Rockware, Logit, MS Office (Excel, Word, Access, Power Point, etc.), and Internet

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1351 to 1400 of 1527)

Go to Search Parameters...

Brief Description

Proficiency in CAD/CAM software’s: Unigraphics(CAD/CAM), Pro-Engineer, Catia, Solid Edge, Autocad, Product Data Management(PDM), Solid Works, C & C++ programming languages, Ms-Office

M.S in Industrial Engineering & Bachelor's degree in Mechanical Engineering. Key skills include computer-aided design & simulation, customer service & Support, operations management. Permanent Resident in USA (can work for any employer)

EIA/EMP, Research on Environmental Issue

Senior Geologist with 9 years experience in many categories of geology( oil, mining & water ), graduated at May1999 (Geology-Chemistry), Faculty of Science, Cairo University, then high studies at 2001 (Sedimentology), Faculty of Science, Cairo University-Egypt, and high studies at 2004 ( Geophysics,

Environmental Lab Supervisor

I am looking job in Australia, Canada & UK. I have 8 years experience in Administration Department. I can run an organization Individually.

I hold a Bachelor degree in commerce. Beside my sound academic record I have a diploma in business electronics data processing and currently pursuing Masters in Financial Management.

B.Tech (Electrical and Electronics)

7 years of work experiences in Asia, in building and civil construction fields. Expertise in project management and formwork design. Graduated with Master in Civil Engineering (project management) and MBA from top schools in USA and Germany.

Civil Designer/Drafter

Seeking a challenging position in the field of Geology GIS, Remote Sensing, and Image Processing

6 years of Network Administration and Operations Management

Instrumentation technician, control systems engineer, mining technologist

Electronics Communications Engineer

Numerous OSHA certifications, Excellent computer skills

ý•ý Based on my research experience where my main skills are reading and using all new ýinformation and programs in computer filed.ý

Electrical control Engineer

Loyal team player, committed to diversity, strong time management and interpersonal skills, extremely organized with strong leadership ability, self-motivated, impeccable work ethic, and have the ability to work independently.

Lebanese graduate,carrier of 3 degrees, chemist, biomedical scientist & general science

Experience in Electrical Maintenance, Software Development and Teaching.

HSE

PhD degree in the field of Industrial Engineering. Experience in the management of international EU research projects.

Experienced, highly skilled, hands-on professional with superior interpersonal and communication skills seeking a long-term position which will make use of his laboratory, refinery processing and manamgent background.

I completed a B. Tech degree in Environmental Health at Peninsula Technikon. I also completed short courses in Environmental Management, HACCP, and Audiometry. I did my experimental training at the Worcester Municipality, Worcester Abattoir, and Maitland Abattoir.

Experience in handling and Interpretation of Satellite images (LISS and PAN), Working knowledge of ICP-Atomic Emission Spectrometry, Xraydiffractometer (XRD), Handling D GPS(500 Leica) for RTK Survey, Detailed field works carried out in the preparation of Hydrogeomorphology and Structural maps

MSc Applied Geology with specialization in RS and GIS Plus 2 Computer Diplomas of 1 yr duration each.

I have experience in researching well and lease records for petroleum prospect mapping and in well site services/ mud logging.

Registered as Professional Civil engineer 2124-11 in Engineers Australia

Have been employed full time since 1981. First 15 years in the military, specializing in explosive ordinance disposal. Since 1997 been working on middle and higher level Security and Safety management. Have extensive security qualifications and experience and very good Safety and Health experience.

Multilingual (English, French, Arabic and Portuguese), computer skills include Word, Excel and PowerPoint, web research, familiarity with the metals markets both precious and base, ability to multi-task/work under pressure and tight deadlines, widely travelled, writing and speech skills (scientific

Mechanical Engineer (B.Sc. - Istanbul Technical University - ABET accredited university), Strong command of English, Occupational Safety and Health engineer, Pipeline engineer, Member of ASME, National & International work experience, Good communication & social skills, Result oriented work approach

Finish all my subjects of the Career of OIL ENGINEERING, in the Autonomous University Gabriel René Moreno (U.A.G.R.M), counting at the moment with the Title in National Provision, and got the title of Environment Fiscal and Advisor Under norms SO 9000, ISO 14000, OHSAS 1800 SA 8000, and Consultants

B.E(Electrical Power) Engineering, A good skill in production and maintenance of electric transformers and consultant on Quality Management System(ISO 9001)

Experienced mining engineer, mine layout and design, design and scheduling of waste stockpiles, roads and utility planning, drill and blast layouts, scheduling, short term planning and project work

Just graduating with a B.S. in Geology. My degree includes a large portion of field work, including: vibracoring modern sedimentary environments (St. Croix, U.S.V.I); studing deformation of the Cumberland Overthrust; hydrology work. I am a quick learner and hard worker.

Aircraft Maintenance Engineer Mechanical, Certificate IV in Aeroskills, Quality Assurance Inspector, Non-destructive inspector, Vibration analysis, Work in confined spaces, OH&S, Ethics & Fraud, Human factors and maintenance error management, Contamination kit trained, Helicopter Underwater Escape

IT Microsoft Technologies for object-oriented development including VB.Net, C#, ADO.Net, COM, XML, VC++, SQL-Server, Oracle, MS-Access, and Web technologies like ASP.Net, HTML, JavaScript, etc.

HSE Professional with 5+yrs exp with NEBOSH + BSc [Chem]+PG Adv. Diploma in Safety

I HAVE 4 YEARS OF EXPERIENCE FROM THE MILITARY AND 3 YEARS OF EXPERIENCE CONTRACTING IN KUWAIT AS AN ELECTRONICS ENGINEER

uranium processing,ground water analysis,lab operation

HONOURS ENGINEERING DEGREE,ASNT NDT LEVEL-2 in RT,UT,PT,MT,CATIA V5 DESIGNING,JAPANESE LANGUAGE

ASE certified in brakes, steering and suspension. good with computers, scanners, and most things mechanical.

I have both BSc and MSc in environmental sciences and have scientific and commercial experience in this area. My recent work experience with the MOD includes project management along with extensive complex software use. Very keen to get back into the environmental field.

Hands on experience in the dynamics and data types of the Oil & Gas exploration industry. Proven reliability and commitment to getting tasks done under tight time constraints. Good time-management skills with an emphasis on attention to detail to ensure quality of data whilst working to a deadline.

Talented mechanic seeks overseas assignment

A dynamic HSE/ Safety engineer with 10 years of Experience in Oil/Gas and Petrochemical Industries with strong desire for success. B.Tech Chemical Engg graduate, NEBOSH-International Certificate in Occupational Health & Safety, IOSH Certified in Managing Safely in Oil and Gas Industries from UK.

Mine surveyor, several years experience surveying underground and surface

Instruments Technician experienced in electronic and electrical aspects of the instrumentation field.

I Am A Mechanical Engineering Graduate Passed Out In 2004. Right Now I Am Doing My Pg In Computational Engineering. I Know Multiple Softwares Like Ansys, Catia, Pro E, Abaqus, Caesar, CFX, C, C++, AUTO CAD etc.

Mechanical Drafter ( Auto Cad Operator)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 [ 28 ] 29 30 31

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out