Resume - PLANNER SMELTER

Misco Jobs

Resume #60756

CONTACT INFORMATION:
View contact information...

CAREER AIM: Continuous learning with lateral implementation of the learning to give maximum output.

PROFESSIONAL SUMMARY
I am a B.Tech (Mechanical Engineering) graduate, having 15 years of sound industrial experience in Planning, Maintenance, New projects in the ALUMINIUM industries having latest technologies (AP30), techniques and concepts like ERP SAP, TPM etc in safe environment.
Presently working as 'Planner Maintenance Reduction' at ALBA.

SKILL AND COMPETENCY

„« Good oral and written skill in English.
„« AP30 Technology exposure.
„« Good computer and its application skill.
„« Effective co-ordination skill among different departments, different cross functional groups like Mechanical, Electrical. Instrumentation & Civil, different vendors, contractors and different level of people from GM to worker.
„« Optimization to get the maximum output.
„« Accept the new challenges (Prepare action, implement, monitor and review).
„« Good experience in the field of Maintenance Planning, Utilities and Projects.
„« Sound knowledge in the field of Aluminium Smelter, Reduction maintenance.
„« Well equipped with latest tools & techniques like TPM, WCM, JIT, BPR etc.
„« Cost effective approach.
„« Prepare presentation in Power point.
„« Positive approach and flexible.

ACADAMIC PROFILE

Year Degree / Certificate Div/Class % of Marks Institute/Board
1987-1991 B. TECH in Mechanical Engineering 1st Class Distinction 74% BIT SINDRI
1984-1986 Intermediate (Science) 1st 65% St. Xavier's Ranchi
1984 High School 1st 78% Bihar Board

Personal Details
Father's Name: Late Shri Birendra Prasad Sinha
Date of Birth: 01-12-1967
Passport No.: E8968898
Present Address: Flat No. 14, Building no. 234, Road no. 1704, Block.917,
East Riffa, BAHRAIN
Permanent Address: Flat no. 63, Jasmine Block, Necco Garden, PUNE, INDIA

COMPUTER PROFICIENCY
„« Well versed with SAP
„« MS Office (Word, Excel & Power Point)
„« MS Project

TRAINING RECEIVED
„« SAP
„« TPM
„« Predictive maintenance
„« Business process re-engineering
„« Safety
„« ISO 9000
„« OHSAS 1801

Experience summary (Total 15 years)

Organization
ALBA - BAHRAIN (Aluminium Producer 8.3 lac ton per year, AP30)
Designation: Maintenance Planner Reduction
Department: Reduction Maintenance
Duration: Sept 2004 to Till date.

Job Profile:
Maintenance planning of Reduction plant in SAP environment covering following areas
* Pot lines
* Crucible cleaning area
* Fume treatment plant (FTP) and gas treatment plant (GTC)
* Cranes and PTA (Pot Tending Assembly Machine)

„« Prepare weekly Schedule
„« Managing work-orders
„« Planning for the Notifications
„« Manpower / Resource Planning
„« Spares planning (Raising PRs, AFSR, Justifications, Inventory control.
„« Follow up of materials and services.
„« MRP Controller
„« Shut down planning, Overhauling planning, Major breakdown planning - Prepare plan schedules in MS Project and get approval from the concerned department.
„« Co-ordination among different depts. for effective implementation of plans and follow up.
„« Load and update data in the SAP system - Prepare bill of material (BOM), Preventive maintenance Plans etc.
„« Collecting data and making reports to assist production and maintenance to take right decisions at right time.
„« Arranging meetings, preparing MOM's, follow up and updating.
„« Calculating AVAILABILITY of equipments periodically (monthly).
„« Prepare departments performance report (monthly).
„« PM documentation, auditing through SAP system periodically and analyzing Back log.
„« Presently working as Acting Planning Engineer (2nd line) having 4 Planners working under me.
„« Budgeting, prepare yearly budget for the Reduction maintenance department after discussion with all the concerned superintendents and update the same in the system.
„« Prepare monthly budget report and make justifications for excess expenses against different cost elements.
„« Prepare department's monthly reports in view of the objectives against Safety, People, Environment, Cost and Productivity.
„« Prepare presentations for the department's half yearly objectives and follow up.
„« Faculty for giving SAP training to ALBA employees.

Organization
HINDALCO (Biggest Aluminium producer in INDIA, 3.5 Lac ton per year)
Designation: Deputy Manager (Maintenance Planning)
Department: Cast House
Duration: April 1996 to Aug 2004.

Job Profile:
Maintenance planning of Cast House.

„« Preventive maintenance planning, shutdown maintenance planning, major breakdown maintenance planning, overhauling plan of equipments etc.
„« Manpower and resource planning
„« Materials planning in MAXIMO system - raising PRs and follow up.
„« Inventory control by ABC analysis.
„« Preparing monthly reports of planning department.
„« Coordination among different department, stores and purchase.
„« In house modifications and projects. Preparing feasibility reports and calculation of payback. Handling contracts.
„« Impart training for Multi skill.
„« Convener of World class manufacturing system (WCM), TPM & JIT.
„« Standardized maintenance practices.
„« Solution for the chronic maintenance problems.

Organization
DATA ALLOYS LIMITED, BOKARO (A turn key project executor)
Designation: Project Manager
Department: PROJECTS
Duration: Aug 1993 to March 1996.

Job Profile:
PROJECTS

„« Independently handling 4 projects inside SAIL, BOKARO from its inception to the commissioning.
1. Inter department piping (size 40 NB to 900 NB), gas like acetylene, oxygen, coke oven, steam, compressed air and water from different plants to
Continuous casting plant.
2. Pump house for steel melting shop.
3. Pollution control projects - De-dusting system of SMS MIXER # 1 & 2.
4. De-dusting system of lime conveyor.

o Prepare specification and tender documents.
o Prepare contracts for different contractors.
o Design and drawing approval coordination.
o Execution as per approved drawing at site.
o Erection and commissioning of the projects in time.
o Prepare weekly progress and attending progress review meeting.
o Prepare MOM, Update and follow up.
o Preliminary Acceptance Test (PAT) & FAT
o Proper handover of projects and documents.
o Co ordination among client, contractors, vendors, consultants etc for effective execution of projects in time within the budged.

Organization
ELGI EQUIPMENTS LIMITED, COIMBATOR (Air Compressor manufacturer)
Designation: Sales & Service Engineer
Department: Sales & Service
Duration: Jan 1992 to Aug1993.

Job Profile:
Sales & Services

„« Mainly looking after Reciprocating and Screw type air compressors.
„« Troubleshooting of air compressors.
„« Installation & Commissioning of air compressors.
„« Servicing of air compressors.
„« Technical discussions and drawing approval with consultants for the requirement in various projects.

ACHIEVMENTS
„« Got 'Aditya Birla Award' for my outstanding performance in HINDALCO in the year 2003.
„« Increased the productivity by 67% of Slab Cutting Machine at Cast House HINDALCO by applying JIT.
„« Developed so many proprietary materials successfully resulting in huge savings against spare parts.
„« Trained 67 employees in Cast House department in TPM, JIT and ERP.
„« Received 6 GOLD CARDs in ALBA for my outstanding performance in work and safety.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 1506)

Go to Search Parameters...

Brief Description

A dynamic accomplished Information Technology Professional with unique combination of experience in Networking and Hardware. Strong Analytical, Organizational and problem solving skills. Ability to identify Operational Deficiencies, skilled in applying Technology and Administration practices to impr

Mechanical engineering finite element analysis composites ansys Master's

PLANNER SMELTER

Mud engineer/ mechanical engineer/ hse advisor/ compliance and standard/ maintenance supervisor/ general inspector and supervisor

AutoCad Mechanical Desktop AutoCad Inventor 3D Modeler

PDMS-11.6, PDS-7.1, Autocad-2006, CAEPIPE 5.11, Pro-E Wildfire2.0

Handled operations Batch Chemical Processes, Fermentation, Distillation, Extraction, Evaporation, Plant Utility Section, Pumps & Compresors, Safety of 3M's and Housekeeping, Maintenance & Overhaul of Operations, Troubleshooting, Startup & Shutdown of the operations in the cGMP environment etc.

analyst

Bachelor of Engineering (Electronics & Communication) ,A.I.V.,A.M.I.E.

7.5 Technical experience, guidance and command in all analytical and environmental based activities, services, management and techniques.

Degreed Electrical Engineer with Pro/E Wildfire 2.0 and Pro/Cabling training

Analytical: Good use of both traditional `wet’ chemistry and modern instrumentation techniques such as HPLC, GC, FTIR, ICP, MS etc. Broad knowledge of oilfield chemicals and their chemistries, mode of action, active constituents and formulations. Good understanding of statistical quality control

I did both undergrad and master's in mechanical engineering with broad range of experiance both in mechanical engineering along with IT

AUTOCAD, HYSYS (PROCESS SIMULATION AND MODELING), H.S.E COMPETENCE PROFICIENCY (SPDC AND NISP), BACHELORS DEGREE IN CHEMICAL ENGINEERING- SECOND CLASS UPPER DIVISION.

10 Years Working As A Cartographer For QARUN Petroleum Company

Working experience - 16 years & 3 months. Highly skilled, experienced, expertise and knowledge as a driller

A fully qualified GIS specialist with experience in the delivery of major asset management projects. Adaptable to business requirements, with management experience. Well versed in the use of ESRI ArcGIS 9.1, WINGS 2.4.10, AutoCAD 2008, Corel Paint Shop Pro XI. IT literate.

E-Business,E-Tendering,International Business Development

FELONY conviction disclosure! Experienced metrologist, industrial electronics repair, computer/network systems analyst looking to reenter tech industry.

Strong knowledge in electronics industries PCB design, assembling, trouble shooting

Bachelor’s Degree in Mining Engineering, Faculty: Petroleum Geology and Geophysics, and Chicago Oakton Community College Faculty: Computer Science.

Experience in Project management w.r.t Electrical, Electronics, IT and Telecommunications, Mechanical equipments, Oil & Gas, and Civil construction equipments, Automotive Industries, Civil Constructions, Project Management, IT / BPO Services, Food and chemical Industries and service sectors

Professional mechanical/industrial engineer seeking a project engineering managmenet or consulting position. Offer extensive engineering and management skills in the industry.

Master of Science in Mechanical Engineering Zone and Energy Manager, Facilities Maintenance Manager

Principal & Project Engineer experienced working Oil & Gas and Industrial electrical projects.

Hard working and Dependable Environmental Professional

Eletro/Mechanical Technician, Applications Engineer

Pro Engineer 2+ years experience

Graduate Chemical Engineer - Looking for an Internship/Co-op/Full time position in the field of chemical engineering.

I have an ability to grasp new concepts quickly and clearly to apply my knowledge and experience for tackling tricky situations.

Visual C++, C#, Visual Basic, Java, J#, Pascal, PROLOG Tools:1.Professional: Microsoft Visual Studio.Net, C builder, Java Visual Age, SQL Server 2000 2.User level: Microsoft Office, Visual Studio, Web Studio, Oracle 9i, Scripting and markup languages: HTML, XML, XSL, VBScript

I WAS DONE B=TECH IN MECHANICAL ENGG WITH 72% MARKS & ALSO DONE DIPLOMA IN MECHANICA;L ENGG & I HAVE ALSO THREE YEAR WORK EXPERIENCE

1 year Wellsite Geologist/Mudlogger; 7 months experienced Varian Gas Chromatography; 2.5 years experienced Staff & Project Hydrogeologist and Environmental Field Technician

hands on experience in hardware and software design, circuit and PCB design, microcontroller circuit and firmware design

Post Graduate with over six years of experience as Geologist with various organizations

A highly motivated and well qualified Chemical and Process Engineer with high experience in Mineral Inspection, Mineral Sample Preparations Mineral Processing and Mineral Auditing Films, Analytical Laboratories and in Processing Industries ready to work under pressure in either a group or independen

Logistics, Technology, Transport and Management Professional

Speak arabic as native and english language (fluent) capeable of using micosoft office ,xl,power point.

Supervising, Inspection, Installation, Maintenance, Computer application and coating specialist

Initially degree qualified as an Electrical/Electronic Engineer, I have been working in the field of DCS Control systems for the past 25 years. I have worked as a Field Service Engineer, Application Engineer, Systems Engineer, Commissioning Engineer. Primarily with Foxboro systems.

Worked for Mckenzie Forest Products for 25 years 12 years as a Supervisor

I am electrical diploma holder,having ten years experience in variety of field like textile company,power plant and research centre.I desire to settle in Australia for betterment

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Environmental Consultant (Engineer/Scientist)/Geoscientist

Bachelor Engineering of Mineral Resources

Microsoft Certified Systems Engineer with over 12 years experience in system and security administration and management.

I have experiance in sulphoric and sulphonation factories

IT professional with over 20 years of experience. He holds certifications from a international security standard - CISSP and is awaiting confirmation of his CBCP, MBCI and CCM (Business Continuity)

Results-driven Industrial Maintenance Planner/Scheduler offering 15+ years of extensive hands-on industrial maintenance experience, committed to efficiently manage and plan machine maintenance.

A Production & Purchasing Manager with a wide range of experience in Engineering and Manufacturing industry. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out