Resume - Over 20 years with Department of Energy contractor experience with environmental...

Misco Jobs

Resume #6148

CONTACT INFORMATION:
View contact information...

WSMS
[Contractor to Department of Energy at the Waste Isolation Pilot Plant (WIPP)]
Carlsbad, NM present

Senior Environmental Engineer
* Project Lead for WIPP Hazardous Waste Facility Permit (HWFP) site implementation of hazardous waste permit
* Strategic goals/objectives to implement operational activities
* Evaluate adequacy of effectiveness of permit performance
* Aid in research project permit compliance in underground
* Oversight of well drilling & well plugging & abandonment to ensure environmental compliance with applicable state & federal requirements
* Interpretation of HWFP and RCRA requirements for WIPP site
* Project Lead for NEPA requirements at the WIPP
* NMED/EPA compliance requirements integration at WIPP
* Environmental compliance assessments and walkdowns of all permitted and non-permitted areas (air, water, radioactive, and hazardous waste)

S.M. Stoller
(Contractor to Department of Energy at the Waste Isolation Pilot Plant)
Carlsbad, NM 12-00-1-03
Quality Assurance NQA-1 Certified Lead Auditor
* Audit technical aspects for waste acceptance certification at the WIPP
* Peer Review 40 CFR * 194.22 (NUREG 1297 compliance guidelines)
* Audit NQA-1 work processes
* ISO 14001 Certified
* Trend analysis for deficiencies tracking
* Conduct of Operations audits
* Developed procedures, plans for QA functions & responsibilities
* Wrote QAP for DOE WIPP site
* Developed matrices for sites procedures, programmatic requirements of NQA-1 and DOE requirements
* Review contract modifications to meet regulatory requirements
* Audit aspects related to compliance with State/federal/local environmental regulations

Fluor Fernald (formerly FERMCO) June 1993 to July 2000
Cincinnati, OH (Fernald Project)
Tech/Program Specialist III
* Regulatory compliance liaison for Fluor Fernald Legal Counsel
* Identify sampling requirements, characterize mixed wastes, low level wastes & disposal criteria for On Site Disposal Facility waste acceptance criteria
* Evaluate/characterize wastes for D&D from process areas and laboratory
* Reclassifying Hazardous Waste Management Units determinations for OEPA/DOE
* Review new environmental regulations for site applicability and implement as required
* Evaluate new DOE Order 435.1 for Waste Management
* Developed safety self-assessment procedure requirements for FEMP projects
* Wrote Root Causal Reportable Accident Annual Report for 1999
* Conduct of Operations & Operational Readiness Review member
* Develop program for "Behavior Based Safety" at FEMP
* Reevaluate DOE product classifications to determine RCRA status if change in product classification to waste
* Interpret/review DOT requirements for transport of hazardous/radioactive materials
* Pollution prevention assessments (PPA), environmental assessments (EA), NEPA, categorical exclusions, environmental impact statements (EIS)
* Baseline determination/assessment - up front planning (TQM, teams, organizational)
* Emergency Planning & Right-to-Know Act (EPCRA) notification, reporting, strategy & policy
* RCRA/CERCLA integration issues site-wide
* Interpretation of Federal/State Regulatory Policy issues as applies (RCRA, CERCLA, LLRW)
* Interpretative issues of hazardous waste pertaining to day to day work practices, disposal, transport, minimization, recycling issues, SW846 sampling protocol
* Audits, Surveillances, Operational Readiness Reviews, regulatory inspections of SAAs, HWMUs, Lab, & construction areas

Bartech Technical Services October 1990 - June 1993
Subcontractor to Fluor Daniel Fernald Environmental Engineer (Fernald Project)
Cincinnati, OH

* Review waste stream characterization/determinations for disposal options
* Review waste characterization sections in RCRA Part B and develop RCRA/CERCLA integration strategy for waste characterization
* Develop Regulatory Compliance Guides (RCG) as needed for hazardous waste
* Assist Laboratory in meeting regulatory compliance for generated hazardous waste, mixed, & LLRW
* Audit RCRA Annual Report to ensure compliance
* Correspondence with OEPA on regulatory issues as needed
* Engineering support services for disposal of low level radioactive waste and mixed waste streams
* Waste generation to disposal flow diagrams
* Regulatory compliance surveillance concerning low level radioactive waste/mixed waste management, handling and storage requirements
* Generator support to maintain regulatory compliance of waste
* Recycling effort support for waste/waste minimization/waste reduction
* Project Engineer for low level/mixed waste stream disposal from characterization to method of disposal

ERA, Inc. May 1989 - October 1990
Subcontractor to Environmental Engineer (Fernald Project)
Westinghouse Environmental Management Company of Ohio (WEMCO)
Cincinnati, OH

* Develop sampling and closure plans for Hazardous Waste Management Units (HWMU)
* Develop programs for low level radioactive and hazardous waste disposal, segregation, characterization and minimization management
* Responsible for waste management program meeting regulatory low level radioactive (NTS-NVO-325) disposal permit requirements
* Coordinated/Responded to FMPC/NTS audit of waste and characterization programs
* Develop/set-up non-contaminated radioactive and mixed waste segregation program
* Updated FMPC Waste Disposal Permit for NTS/NVO-325

Westinghouse Materials Company of Ohio April 1984 - May 1989
Cincinnati, OH Waste Technologist (Fernald Project)

* Developed/wrote FMPC Waste Disposal Permit for NTS meeting NVO-325 requirements
* Coordinated FMPC/NTS audit of waste programs
* Project coordination and responsibility for disposal, storage, transport and segregation techniques for radioactive, non-radioactive and hazardous waste sources
* Working knowledge of state and federal levels for environmental compliance and transport regulations (RCRA, TSCA, CERCLA, SARA)
* Developed and wrote procedures for radioactive, hazardous, mixed and non-radioactive wastes
* Developed and conducted training sessions for waste, health and safety (OSHA) areas
* Developed annual training, qualification history, and certification reviews
* AutoCAD drafting and design for engineering applications and technical illustrations

Excellent Computer skills:
MS Word, MS Excel, & Corel (MS Access, AutoCAD)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 1596)

Go to Search Parameters...

Brief Description

HVAC Field Service,BAS,DDC

With an environmental engineering degree Ms. Shambulova has experience in research engineering projects and programs related to environmental impact assessment, audit, monitoring, risk evaluation, management, health and safety and other social and economic, design, and engineering and standardizatio

Environmental monitoring and assessment, M.SC.(Chemistry), P.G. Diploma in Environmental Management

Assistant professor-Hydrogeologist with 9 years of experience Main fields of expertise: -Evaluation of groundwater resources in various aquifers -Water supply schemes (well design, pumping tests etc.) Participated and led over 60 Research projects from 1995 Full PC and GIS skills

EXPERIENCE Environmental systems design and installation Site assessment and remedial investigation Wastewater treatment systems Project oversight and quality control

Software Engineer with over 15 years experience in the development of software, database designs and real-time software solutions.

20 years experience in EHS

40hr hazwoper, Confined Space Entry, Underground Storage Tanks, Industrail Hygeine, Industrail Safety, Lead Abatement, Lead Superviser

I am a strong team player with proven experience contributing in cross-functional teams to fulfill corporate goals, who communicates well both verbally and in written form, who shares his ideas and knowledge with others, who develops excellent working relationships to his co-workers and customers.

Broad knowledge of environmental chemistry and extensive experience in laboratory processes, instruments, equipment, quality assurance and control, analytical tutoring, and environmental auditing in 10 years of professional practice.

Eleven plus years of providing Environmental Management and consulting services experience in Asbestos and Lead Abatement Surveys/Designs/ Monitoring, Health & Safety, Emergency Response, Water Quality Management, Hazardous Waste Remediation, Industrial Hygiene, and Indoor Air Quality.

Proven professional experience in Manufacturing Processes in Ethylene, Ethylene Oxide, EthyleneGlycol and Ethylene Benzene, Process Design and Optimization. Experience with process control objectives to optimize unit operations.

M.E. in Environmental,2000,M.S. in Civil, 1993 Peer Consultants Rockville, Maryland Project Engineer May 2001-January 2003 Conducted research, design and implementation of lime stabilization processes of municipal bio-solids at the Blue plains Waste Water Treatment Plant in Washington D.C.

I have been working with the Mecklenburg County Department of Environmental Protection (MCDEP) since August 2000. I have had the 40-hour OSHA HAZWOPER training.

To work in a physically active and customer focused position using my vocational communication and practical skills and time management. Over 18 years experience as an electrician and supervisor in different firms. Project delivery. Excellent analytical, problem solving skills and breakdown.

Consultancy, Teaching, Research, Planning & Design exprtise and experience in Hydrology, Water Resources Engineering, Civil Engineering Systems & GIS inc. as Founder Director, National Institute of Hydrology, Roorkee, India and (Retd) Professor of Civil Engg, IIT, Kanpur

Admisnistrador de sistemas,Systems Administrator,Ingeniero de Sistemas,Systems Engineer,Ingeniero de Software,Software Engineer,Ingeniero Telecomunicaciones,Telecommunications Engineer,Project Manager

An MSc Holder in Environmental Practice; Pollution Management with trainings in oil spills from OSRL/EARL Limited UK, and health and safety course from Allied healthcare UK. Have experience in environmental consulting and researching. IT literate, able to use ArcGIS, work on own initiative or as par

Environmental / Safety Engineer More than 10 years experience

Safety Health & Environmental Engineer/Consulant/Energy

Civil engineer with some experience in environmental compliance and regulations

I am a Pro-Engineer Designer with experience up to Wildfire 3.0, Pdmlink 8.0 & 9.0, SAP, and Intralink 3.4.

I am Civil / Structural Engineer with 25 years of experience. Presenly I am working as a Lead Engineer for last 10 years. I work as a hands-on lead and comfortable with checking of calculations, doing schematic design and providing site support.

Sir, I have completed MASTER DEGREE in INDUSTRIAL SAFETY ENGINEERING at MEPCO SCHLENK ENGINEERING COLLEGE at Sivakasi, Tamilnadu in India.Also I appeared POST GRADUATE DIPLOMA in ENVIRONMENTAL MANAGEMENT through distance mode. In addition I completed BACHELOR DEGREE in MECHANICAL ENGINEERING also

ME Environmental Engineering and management in One year Exp in Wastewater treatment plant, & my skills is Designing of wastewater water treatment plant,Air pollution control,biological treatment system.

C,C++,MATLAB,ZMAP,GIS,CRISIS,SIGMA PLOT

Test Engineer

Microsoft office, Auto cad, SAP, Everstress, Winhwy

2 years of Knowledge of the environmental compliance requirement (40 CFR Part 60, 40 CFR Part 71, and 40 CFR Part 75); 4 years of experience working with continuous emission monitoring systems (CEMS).

Experienced Mech. CAD designer utilizing ProE, Solidworks,Autocad and assoc. PDM packages to work on electromechanical projects for companies in the medical, power generation, textile manufacturing, communication, consumer product, industrial and aerospace industries.

Phd in Geology, presently working as a hydrogeologist in central groundwater dept. india for the last 8 years

hold a Bachelor's Degree in Biomedical Engineering ,

„Ï 9+ years experience in PRODUCTION FIELD.

Bachelor in Engineering - Metallurgical Engineering.

Environmenatl Skills: Water reuse planning, ArcGIS, Energy, Wastewater Treatment, Remediation, BioWin, Modeling, Stormwater, Groundwater modeling

I am seeking a Well Site Geologist/Mudlogging position with a quality, client service oriented company. I have worked in Environmental Consulting and Mudlogging/Well Site Geology. My oilfield experience is in Utah, primarily in the Uintah Basin, and also in Colorado, New Mexico, Wyoming, and Texas.

Electronic integrated controls, PLC control, installation repair and preventative maintenance

Over 20 years with Department of Energy contractor experience with environmental management, remediation, regulatory compliance, pollution prevention, quality assurance and project management/ technical support experience. Excellent written and oral skill level.

Mining Engineer and Geologist with twenty-seven years in precious and base metals, coal and industrial minerals. Professional Engineering licenses in three states, with unique construction and environmental achievements. Advanced technical and strong supervisory skills.

Water industry: French citizen w/U.S. Green card; 27+ years experience in construction & operations and maintenance; electromechanical and site management skills; specialist in process component for W/WW systems

C/C++/ VB / SCADA / Electronic / Embedded / Automation / Systems Engineering

Installation of both computer hardwares and softwares. Knowledgeable in LAN/WAN configuration and troubleshooting. DSL and WiFi connections and configurations. Familiar with all types of Windows-based operating system.

Chemical Engineer with Masters Degree in Environmental Engineering and Management. Areas of experience include, hazardous waste management, remediation & cleanup, environmental impact assessment ISO 14000 and environmental audit.

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

A full time position to appreciate and explore a challenging environment in the field of Environment and Safety that offers Professional growth & advancement opportunity while being resourceful, innovative and flexible

Solutions-oriented Field Service/Application Engineer with a proven track record of delivering effective product engineering, maintenance and customization across a diversity of industries.

New Graduate with BS ChE and Geol. Industry experience!

Testing resume with 3+ years of experience

Reliability engineer, plant engineer, manufacturing engineer, expert in kiln and ball mills, hydraulics pneumatics

I have HND in Building Technology. I also have good knowledge of AutoCAD. I had been involved in construction work at different capacities.

1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out