Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #62336 next resume »»
CONTACT INFORMATION:
View contact information...

Single, 28 years (07-08-1978),
Lebanese Nationality

RESEARCHER IN PROCESSES FOR THE ENVIRONMENT
SPECIALITY: ENVIRONMENT AND PROCESS ENGINEERING
DOCTOR OF « UNIVERSITE DE HAUTE ALSACE »
ACTUELLE SITUATION

I am a PHD holder in process engineering at l'Université de Haute Alsace where I am also monitor engaged by the Center of Initiation of Higher education of Alsace. Thesis carried out with Laboratoire Gestion des Risques et Environnement GRE under the direction of Prof. Partick GILOT.

Set of themes of Research: Treatment – combustion (Air Pollution.)
Characterization of the effluents emitted during combustion as well as the CO2 sequestration during combustion. The setting of models which can contribute to the realization of industrial devices of treatment.
Laboratoire GRE, 25 rue de Chemnitz, 68200 MULHOUSE

OCCUPATIONS AND RESEARCH
* Research activities.

2006
Post doctoral: Research Engineering CFR at Ecole des Mines de Nantes, Power and Environement departement. "Study of new materials for chemical looping combustion". Collaboration: TOTAL, GDF, IFP and Marion technologies.

2003-2006
Thesis in collaboration with ALSTOM (France) – CEMEX, (Mexico) - ADEME
Director: Pr P.GILOT

Thesis tiltle: « CO2 capture by calcium cycles in circulating fluidized bed: Experimental study and Modeling».

The thesis consists of an experimental study of the mechanisms of CO2 capture by carbonatation/decarbonatation cycle and of the feasibility of 130 MWe pilot scale with circulating fluidized bed (CFB), running on the petroleum coke and dependent on a cement-manufacturer context.

The process is characterized by a double chemical loop using calcium:

First stage: Capture CO 2 with formation of CaCO3 in a circulating fluidized bed reactor integrated in the cage of the waste heat boiler, using exceeding and recycled lime.

Second stage: the calcium carbonate is calcined for recovery of collected CO2 and recycling of the lime. This decomposition is done in a circulating fluidized bed functioning in oxycombustion.

A stage complementary to the process is the decomposition of CaSO4 to form calcium bisilicate (belite Ca2SiO4) in a separate reactor.

The essential points relating to this process are as follows:
- The support calcium is used for the carbonate and sulphate formation which is then decomposed;
- The losses of calcium reagents (fragmentation, fly ashes) are integrated in the circuits of handling of the cement factory and thus used. There is no worn catalyst on the contrary other processes of CO 2 captures;
- The process combines in a very narrow way technology CFB boiler, CFB treatment of the fume and cement factory.

Laboratoire de Gestion des Risques et de l'Environnement – Mulhouse (68)

2006

Projet R&D (contrat C3 capture: « Commission of the European communities »: ENERGY) Laboratoire Gestion des Risques et Environnement
Study of the CO2 capture mechanisms in chemical looping combustion.

2005-2006
Project R&D (contract ENCAP: « Commission of the European communities »: ENERGY) Laboratoire Gestion des Risques et Environnement

Combustion of the Petroleum coke in a high oxygen medium at high temperature in a circulating fluidized bed.

2004-2005
Projet R&D (contrat C3: « Commission of the European communities »: ENERGY). Tamuin pilot installation, Tamuin – Mexico.
Bi – silicate formation in Circulation fluidized bed in the purpose of cement formation at lower temperature.

2003-2004
Training course of Master 2. - Laboratoire Gestion des Risques et de l'Environnement – Mulhouse (68)
Production of hydrogen by steam reforming of methanol over copper-based catalysts: the effect of cesium doping for fuel cell application.

2002-2003
Master 1 training - Laboratoire CHAMSIS - LEBANON (13) – « Kinetic study of the cyclohexane oxidation by hetero polyacid containing tungsten: Kinetic study of the oxidation reaction"
* Teaching Activities.

2006-2007: Courses of « Clean Power Generation Technology at the AUST (American University College of Scinces and Technology (Achrafieh - Beyrouth). Department of computer science and communications, 3 credits.
2006-2007: Work Practice of « Organic Chemistry at the Lebanese University - (Section V - Nabatieh). License II, Biology, 24 heures.

2006-2007: Work Practice of « Organic Chemistry at the Lebanese University - (Section V - Nabatieh). License II, Biochemistry, 24 heures.

2006-2007: Courses of « Analytical Chemistry at LIU (lebanese International University (Bekaa). License III, Biomedical Sciences, 3 credits.

2006-2007: Courses of « Analytical Chemistry at LIU (lebanese International University (Bekaa). License III, Biology, 3 credits.

2006-2007: Courses of « Thermodynamic at LIU (lebanese International University (Bekaa). License III, Biology, 3 credits.

2005-2006: Heat and Mass transfer, fluids Rheology ENSCMU- MULHOUSE -. Master I, Risques technologiques naturelles (RTN), 48 heures.

2005-2006: Heat and Mass transfer, fluids Rheology l'ENSCMU- MULHOUSE - Master I, Ingénieurie Environnementale (IEN), 48 heures.

2005-2006 Thermodynamics and kinetics » ENSCMU- MULHOUSE -. License III, License Chemistry - Physics, 24 heures.

2004-2005: Work practise "analytical chemistry". Faculty of Science and Technologie UHA. First year IUP option Industrial risk management, 96 hours.

2003-2004: Work practice of « Chemical engineering – Engenering Processes of ENSCMU- MULHOUSE - (Higher national school of chemistry of mulhouse) [heat and mass transfer, fluids Rheology]. second year engineering, 48 hours.

2003-2004: Work practice of « Chemical engineering – Engeneering Processes, ENSCMU- MULHOUSE - [heat and mass transfer, fluids Rheology]. second year engineering, 48 hours.

INITIAL FORMATION

2003 - 2006 Doctor in PROCESSES ENGINEERING FOR THE ENVIRONMENT - Université de Haute Alsace (UHA), Laboratoire Gestion des Risques et Environnement, GRE, under the direction of Pr. P. GILOT Mulhouse (68).

2002-2003 Diploma of Master 2 ` Chemistry of materials'
Carried out within Laboratoire GRE under the direction of Pr P. EHRBURGER and of Dr. H. MAZOUL, mention good - Ecole Nationale Supérieure de Chimie de Mulhouse.
Classification 2 on 25.
General average: 14.03

2001-2002 Master 1 ` Sciences' in chemistry: Option general chemistry.
Lebanese University – Faculty of Science

1997-1998 Baccalaureat D, Experimental sciences – College notre damme des Sœurs Antonines - Nabatieh
COMPETENCES
* Capacities to be brought to a successful conclusion research projects innovating in the fields:
* Air pollution
* Transfers of pollutants and environmental impacts
* Processes of depollution: characterization, kinetics of the reactions, optimization
* Significant capacity to work in team: Training and framing of technicians, student IUT- Engineer and training BTS
* Wide knowledge of physicochemical, chemical techniques of analysis and of the testing methods standardized (Thermogravimetry, BET analyze, IR, spectrometry of atomic absorption, ICP-AES, Electronic scan microscopy, Fluorescence X, X-ray Diffraction …)
* Wide knowledge of the constructions breadboard at the laboratory:
* Circulating fluidized bed combustion (CFBC)
* Fixed bed reactor
* Thermogravimetry
* Horizontal furnace
* Muffle furnace
ADMINISTRATIVE ACTIVITIES AND COLLECTIVE RESPONSIBILITIES
* Framing and training of a trainee of second year of IUT ` Physics-Chemistry' on the study of the calcination of Tamuin limestone in thermogravimetry (April-May-June 2004)

* Follow-up and framing of the training courses of 3 students of the 2 2nd year of Hygiene Safety Environment (2003-2004)

* Co-organizer of "Sciences in Festival" within FST of Mulhouse (2004-2005)

* Co-organizer of doctoral day within FST of Mulhouse (2005-2006)

PUBLICATIONS

1. Epoxidation du cyclohexène sur des nouveaux catalyseurs à base de silice mésoporeuse organisée, J.Toufaily, T. Hamieh, M.soulard, J.L. Guth, J.Patarin, A. Houteit et L.Sierra,J.Phys. IV France, 2004, Vol.113, pp 151-154.

2. Production of hydrogen by steam reforming of methanol over copper-based catalysts: the effect of cesium doping. A. Houteit, H. Mahzoul,, P. Ehrburger, P.Légaré, F. Garin. Appl. Catal. A: Gen., 2006, Vol 306, pp 22 - 28.

3. Influence of peridically changing oxidizing and reducing environment on bottom ashes decomposition under FBC conditions. A. Hoteit, C. Schonnenbeck, P.Gilot. in press (chemical engineering Sciences)

COMMUNICATION

1. Experimental study of CO2 capture by calcium cycle in circulating fluidized bed, fith conference on material science, Beirut, lebanon, May 2006. A.Hoteit, C. Schonnenbeck, P.Gilot. (oral communication)

2. J. Toufaily, T. Hamieh, M. Soulard, J.-L. Guth, J. Patarin, g. Baydoun, D. naoufal, M. Kodeih, M.-B. Fadlallah, I. Zeineddine, M. Elrifai, A. kanj,
A. Hoteit, L. Sierra. « Epoxydation du cyclohexène sur des nouveaux catalyseurs à base de silice mésoporeuse organisée ». 29èmes Journées d'Etude des Equilibres entre Phases, 2 et 3 Avril 2003 – Lyon, France. pp. 183-186

3. Capture de CO2 par cycle de calcium en lit fluidisé circulant, journée de l'Ecole dotorale UHA, Mulhouse, Juin 2006. A.Hoteit, C. Schonnenbeck, P.Gilot

4. Fith Day enquiring Young people, French Société of chemistry (SFC) – Villeneuve d'Ascq (France), April 2004 « Effet de l'ajout de composés alcalins sur l'activité des catalyseurs Cu/Al2O3: Application au vaporeformage du methanol ». A. Houteit, H. Mahzoul,, P. Ehrburger, P.Légaré, F. Garin. (oral communication).

5. International Symposium on CO2 sequestartion – Finland, 23, 27 april 2004. " CO2 capture by calcium cycle: effect of Température and particle size fraction". A.Houteit, C. Sconnenbeck, P.Gilot. (oral communication).

6. CO2 Capture Technologie Overview. EU, Roll-out, Bruxelles, June 2nd, 2005. "Grain size model for calcinations of calcium-based sorbents in a broad range of CO2 concentrations". A.Houteit, C. Sconnenbeck, P.Gilot. (oral communication).

COMPUTER SCALES
Languages: Fortran 77, 90, Scilab, C++
Systems: Linux, MS-DOS/Windows, Labview, Dasylab, HSC, Gnuplot, Word, Excel, Power point, Photoshop.

LANGUAGES
* Current control of English language:
* Oral and written communications (scientific and technical congresses, publications in international scientific reviews)
* Industrial meeting (ALSTOM, CEMEX,TOTAL, GDF, French Institute of petroleum )
* Current control of French language.
* Arab (mother language).

OTHERS
Table tennis: French federation of table tennis. MTT club 02680105.

CONTACTS
Will be provided

View contact information...
«« previous resume next resume »»
Search Results (Resumes 501 to 550 of 1558)Go to Search Parameters...
Brief Description
Automation engineer with 7 years of international experience in PLC/HMI
Having more than 5 years of experience in AutoCAD and Q.A
I graduated in Agricultural Engineering and presently doing my Master's project in water resource development and management at T.U: Dresden, Germany with financial assistant from DAAD and being student of IIT-Kharagpur, India expected to complete it by June 2006 having knowledge in computers
As per the Job requirement posted on web site as a System administrator/Network administrator/Server engineer/Desktop Engineer. I am 100 % suits for this job because past 6 years I was doing the same job. In those 6 years I worked 4 years for the remote locations in Kuwait. I used to travel everyday
Environmental Consultant/ Biologist / Public participation & Consultation
I have completed M. Sc. in Forestry from the Institute of Forestry & Environmental Sciences, Chittagong University, Chittagong, Bangladesh. I have grasp knowledge in statistical data analysis. I have few research articles published in the national and international journals.
With thorough knowledge in design, installation, fabrication and commissioning of desalination plant.
Mtech (Ocean Engg) With 1-Year Experience In Mooring Design And Dynamics
Geologist 4yr exp. environmental and geotechnical
A STRONG ACADEMIC CANDIDATE WITH A MSC ENVIRONMENTAL TECHNOLOGY WITH DISTINCTION. SPECIALISING IN WATER QUALITY AND TECHNOLOGY, WITH 5 MONTHS EXPERIENCE WITH ANGLIAN WATER SERVICES. WISHES TO FIND EMPLOYMENT IN OR CLOSE TO LONDON, UK.
I wish to work for a reputed firm where I can grow with my work. My qualifications and experiences would help me perform the job effectively. With the guidance of a well-established firm as yours, I would be able to further improve my skills and efficiency, necessary to be a valuable employee.
Safety Engineer, (NEBOSH) Lifting & Rigging Supervisor, (NVQ 3.)
Executive level mechanical engineer with extensive experience in many enginering fields.
Engineering Graduate
Combined experience in Refrigeration and Electrician Technician in the Pharmaceutical Industry, Petrochemistry and Building Management System (BMS).
Registered professional geologist - Wyoming (PG-3477). BS and MS degrees in Geology. Work history includes geotechnical engineer/estimator in the construction industry; mine engineer at a bentonite mine, and the following experience as a geologist:
Power Plant Chemistry, Water Treatment Plant commissioning , Boiler Water Commissioning
computer Literate,
I am is a specialist in the implementation of water supply projects, waste water systems and solide waste in developing countries.
Completed post graduation in Environmental engineering and completed graduation in chemical engineering and having one year experience in chemical bacground.
B.S. Nuclear Engineering (Texas A&M University), Fluent in Spanish, Internship experience, proficient in various engineering computer programs.
chemical engineer with 4 years experience
I am very interested in Environmental Chemist/Scientist positions, as it is my career ambition to become an active part of environmental consultancy. I recently graduated with a chemistry degree from Stetson University with a strong emphasis in math and environmental research.
Computer Hardware & Network Engineer
Qualification: B.E. (Mechanical), Diploma in International Trade. Skill: 14 Years Work experience in the field of Production, Planning & Control and Product Development
Execllent computer literacy,3d modeling via solidworks,autocad
My background is primarily Biology and Ecology driven. I have been an Environmental Investigator and have also worked for a very large environmental consulting firm outside of Chicago. I am currently working as an Environmental Scientist outside of Atlanta and looking to further my career.
I'm a Graduate in Bachelor of CIVIL ENGINEERING and acquainted with basic knowledge in Computers especially MS office, Project and CAD.Experienced in water supply networks and execution.
To acquire a challenging full-time position utilizing the skills I have gained through my experience and education in Industrial and Systems Engineering.
NDT/QC UT Level III, prior RT/MT/PT/VT Level III. 25+ years experience in inspection in power, oiland gas and construction
In my 23+ years working in the geothermal fields in the Philippines, I have developed skills engineering, management, administration, safety and other disciplines. I feel that I am qualified for any geothermal job.
Leading the implementation of HSE policies and practices
I am a mechanical engineering graduate, having experince in Design of under water pipe line Crossing (PE), Hydraulic design of Distribution Networks for 21 Villages using EPANET- 2.0 Software. Assisted for Report preparation of Hydraulic Calculations. AutoCAD2004
Carried out maintenance and service central HVAC chilled water system, trouble shooting in control wiring; screw and reciprocation chillers; Building management system [BMS]; air handling units (AHU); fan coil units (FCU); split and package units.
c++,c,Core Java, Oracle, etc. 1+ yrs of Exp. in Software Development life Cycle.
Master's Degree in Telecommunications Management 3 and a half years of experience Configured Cisco devices Experience in analyzing end-user traffic QoS protocols Creative problem solving Bilingual (Spanish & English)
OBJECTIVE A challenging position in environmental engineering or hydrology that will allow me to use my analytical skills.
To work in a team environment on projects that would give me an opportunity to use the technical knowledge that I have acquired and that encourages collective thinking and learning.
To seek a firm that shall develop my leadership qualities further and make me a step closer towards becoming a total person. To further enhance my capabilities, expand my knowledge, apply my abilities, and improve my personality in an environmental firm
I am a brilliant and confident chemical Engineer with always in sight of practical aspects of Engineering. I am technically strong, but would like to have exposure at the Industry level. I promise that I would be a fast learner and an asset to the industry in the future
I worked 1 year in the environmental field. Thesis: "3D finite difference gasfield simulation model and induced subsidence verification". During it I've passed a stage near ENI group. Currently I dedicate myself to study C++, and I've a collaboration with Basilicata's University - Italy.
GeoEnvironmental Scientist with considerble experience in the environmental and petro-chemical industries
6.5 years experience as Hydrologic Technician with the U.S. Geological Survey
Environmental Engineer, EIT, Good at Auto CAD,MS Office,HEC-HMS,S-PLUS
Certificated Asbestos Inspector
To carve a niche for myself in the industry by working in a challenging position in the field of Electrical Engineering, which shall leverage my skills and bring value to my employer.
CO2 capture, process engineering
Experience in handling projects on Environmental Impact Assessment Study, Groundwater Modeling, Solid Waste Management, Rainwater Harvesting, Treatment plant Design, EMS, ISO-14000 and ISO-9000.
I have experiences regarding Environmental Impact Assessment(EIA), permitting, environmental monitoring and project implementation conformance monitoring. I have three years environmental engineering and international experiences with high standards(Projects implamented by WorldBank&EC Policies.)
environmental engineer, specializing in Air pollution with strong knowledge in computing
1   2   3   4   5   6   7   8   9   10   [ 11 ]   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32  
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com