Resume - Experienced Instrumentation and CEMS analyzer tech with 20 plus years . Former n...

Misco Jobs

Resume #63787

CONTACT INFORMATION:
View contact information...

Objective

To obtain a position as an instrumentation and control systems technician

Work Experience

Caltrol Emerson Process Controls, Hawaii /El Segundo Ca. Nov 2006-Present
Field Service Specialist Reliability Analyst

Provide technical support in plant instrumentation for wastewater facilities, power plants and refineries in the Hawaiian Islands and at the Chevron El Segundo refinery. Provide design analysis and MOC's to address problem areas. Supervise contractors in design rework and installation. Troubleshoot, install and repair a wide variety of analytical instrumentation including VFD.s, emissions analyzers, lab equipment, and CEMS systems according to CFR 60/75 Provide startup assistance and loop calibration and certification. Calibrate various types of flow, temperature and pressure transmitters. Install and calibrate Limitorque MOV.s, and Fisher control valves. Provide design and technical support after hours for various refinery shipping terminals. Train personnel in valve maintenance and tuning. Provide support for Honolulu wastewater plant upgrade to Rosemount 3051 field bus transmitters. Calibrate and tune PID and various control loops to DCS and SCADA.Train other CEMS tech in gas analysis principle, CEMS troubleshooting procedures and analysis. Used Passport, Maximo, and MP3 work order systems.

Napa Sanitation District Napa Ca. Dec. 2003 - Dec 2006
I/C Maintenance Specialist

Maintain wastewater treatment plant instrumentation and electrical controls. Maintain pump station VFD.s, PLC.s, and remote telemetry RTU's. Calibrate plant analyzers including, PH, ORP, Turbidity and Conductivity Analyzers, and GCMS. Supervise and schedule maintenance contracts, provide direct oversight of contractors and plant operations staff on analyzer maintenance and calibrations. Submit monthly emissions compliance reports to the applicable state and federal agencies. Maintain Factory link SCADA and Rugid remote I/O telemetry that interface with pump station level, station controls or alarms. Maintain, and calibrate all flow, pressure and temperature transmitters to NIST standards. Maintain accurate calibration database. Perform yearly state mandated mag flow-meter calibrations. Maintain protocol 1 and 2 calibration gases to EPA and CFR 60/75 standards. Set up and program HMI interfaces, smart transmitters, and field bus devices using the Rosemount 375. Maintain digester Waukesha Cogen engine controls and emissions analyzer. Rebuild and calibrate Fisher control valves and Rotork MOV.s. Provide rotating 24/7 on call support.
Supervised plant staff in the correct methodology for calibrating and reporting for state and BAAQMD plant compliance analyzers Acted as I/E supervisor during primary supervisor's absence.

Foster Wheeler Corp. Martinez Ca. Oct. 2001. Nov. 2003
Senior Instrument Technician

Maintain GE Frame 5 Gas Turbines. Calibrate, troubleshoot or repair plant instrumentation and electrical control systems. This included all systems and sub-systems hydraulic, pneumatic, or electronic. Maintain CEMS Cirrus PAI emissions monitoring system. Perform monthly backup of DAHS and file. Prepare and submit compliance reports to state agencies. Troubleshoot, program and maintain a Bailey INFI 90 DCS and Modicon PLC controls. During turbine outages calibrate all field devices associated with turbine control, providing written calibration reports, documenting accuracy according to IAS, NIST and ISO 9002 standards. Supervise staff in correct monitoring of NO, NOX emission monitoring and data acquisition analyzers according to CFR 60/75 standards. Maintain plant LEL and explosives monitoring MSA analyzers. Supervise all plant control valve and actuator maintenance, order and maintain Fisher parts inventory. Maintain all plant safety equipment including portable gas detectors, fixed gas detectors and confined space entry equipment and rescue devices. Trained in confined space entry and rescue.

Central Contra Costa Sanitary Dist Martinez Ca. June 1996. Sept. 2001
Senior Instrument Technician

Maintain wastewater treatment plant electrical and instrumentation systems. This included plant CEMS analyzers, PH, Opacity, conductivity, turbidity and resistivity analyzers. Troubleshoot DI water and filtration plant. Troubleshoot 480 3 phase motors and controls including 200-600 HP VFD's. Design and implement new instrumentation control schemes. Implement plant wide PM schedules and provide improvements to promote greater reliability and equipment performance. Worked rotating on call for emergencies. Maintain Cleaver Brooks boilers and waste heat boiler controls. Rebuilt plant control valves. Maintained plant air and gas compressors.Maintained waste heat boilers, Solar gas turbine and cleaver brooks boilers.Maintained plant calibration standards to NIST and ISO standards. Maintained protocol calibration gas standards. Led continuous improvement teams plant wide, performed process evaluations. Provided agter hours on call support.

Education

Tullahoma High-Tullahoma, TN.
Graduate

U.S. Navy 1976-1982
Graduated Basic and Advanced Instrumentation Schools

Qualified USS Benjiman Franklin SSBN 640 and USS Dace SSN 607 Nuclear Powered Submarines
Attended numerous technical schools during crew off periods

California Water and Environmental Association
Attained I/E Technical Certification Level 2

Trained CEMS/DAHS CFR.s 60/75 Cirrus / PAI
Certified on Factory Link S.C.A.D.A.
Member confined space rescue team.
CPR and First Aid Certified
BATC Certified. Respirator certified.
SCBA certified and SCUBA certified
NCCER level 5 certification

Professional Memberships

California Waste Water and Environmental Association, Instrument
Society of America, ASHRAE. Submarine Veterans Society-USSVI
Hobbies Sailing, diving, camping, fishing and church
Please paste your resume here. Don't include 'Contact Information' because it will be added automatically from corresponding field above. If you used symbols/special characters such as bulletted lists make sure they are properly displayed. We suggest you to replace bulleted list symbols with minus symbol (-).

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 1513)

Go to Search Parameters...

Brief Description

A highly experienced Sr. Chemist with postgraduate qualification in Analytical Chemistry from AMU Aligarh University, India. Possessing 14 years of experience in operation and management of environmental protection, power and desalination plant and R&D laboratories. Expert in analytical technique

My experience is mainly on industrial, oil & gas, petrochemical and infrastructure projects in India and Saudi Arabia. My qualification is a Masters degree in Construction Engineering & Management and i have for over 10 years of experience working on projects with multi-national companies.

Rotating & reciprocating equipment technician

• High financial and numeric ability, establishment of policies and guidelines, playing many strategic roles for Multinational Companies’ Branches in Ecuador, South-America (+15 years)

Experienced Instrumentation and CEMS analyzer tech with 20 plus years . Former nuclear power sub vet. Ten years experience in wastewater and water plants. Also gas turbine experience.

Civil Engineering graduate with over 16yrs of experience in Civil Works (12yrs in Middle East) with a versatile potential to utilize & develop the vast experience gathered in the field of pipelines & infrastructures, dedicated to contribute the best efforts for growth of the company.

I have 10 years experience in instrumentation and control field. I have designed, installed, tested, calibrated, start up, commissioned, maintained and repaired industrial electrical and instrumentation control systems and skilled in PLC, DCS, Programmable drive based control systems.

Systems Engineer - SW HW Server Client Microsoft Linux Unix - networking WAN LAN VPN WLAN routing switching - Physics degree and scientific work in high voltage and superconductivity - 2 years mechanical engineering - relocate to anywhere - fluent English, German, French, some Portuguese (braz.)

Engineering Graduate in Safety and Fire having 3+ Yr Experience. Skills:Risk assessment,Safety Management,Safety Engineering,Hazard Control,Fire Engineering,Design etc

GSM/CDMA Project Manager

Sr. EHS Manager Professional, 20+ years

Experienced Latex and PU Plant Manager

I have skills in project manage ment in: Aviation,Defence Telecommunications, Materiel Maintenance and Logistics.

Mechanical Engineer with experience in Oil, Gas and Industrial air filtration to meet ISA standards

Experienced Engineer, Diverse Background, Mining, Environmental

water and waste water power plant, steam, laboratory, analysis chemical chemist

I am working in an ISP as a Asst. System Admin. Also Computer Hardware Executive. I am Master holer.

Registered Electrical Engineer and trained Quantity Surveyor, able to combine technical knowhow with commercial understanding into Quantity Surveying, Estimating and Sub-contract Administration

IT professional with 7 years of professional experience in diverse roles; varying from software architect, process engineer, project leader and software developer.

A diligent Chemical Engineer committed to hard work. A good team player, highly mobile and willing to be part of a result-oriented team in any part of the world. I am a fast learner, armed with a comprehensive technical understanding in Production/fabrication. I possess excellent communication.

I am a highly qualified, experienced and creative professional seeking a Design/ Drafting Engineer position in your Organization to utilize my excellent skills and passion for challenging work.

Civil/Structural Field Engineer. Construction Management with large EPCM projects

Instrumentation, Automation, control & electrical engineer with 3 years experience

My skills and qualification are exemplary

. I am having vast experience (22 Years) in an integrated industry in construction, Projects & Maintenance and in Diverse fields. I am also suitably qualified (BE (M), ME (PROD), DIP. IN MGMT, PGDIT) for taking up any challenging assignment with a rewarding career anywhere in the Globe using the mos

PLC/FPGA Process Controls Electrical Engineer Allen bradley and Siemens architecture proficent with Control Logix Design Experience.

Junior geologist with one plus year of experience including but not limited to geologic mapping, core and chip logging, soil sampling, drill logistics, and ARCGIS familiarity.

I have completed my graduation with microbiology subject and also completed my laboratory technician course from government hospital.

Peter is a highly experienced environmental engineer with significant expertise in oil, gas and mining, regulatory issues, sustainable development, corporate social responsibility and policy development. He is a Chartered Engineer (CEng, MICE), and an Environmental Professional (CEnv, MIEMA)

3 decades of environmental, health and safety experience in the private and government sectors

NPDES Inspector/Trainer / EPD&EPA Permitting / Site Inspections / EIS / EIA

Proven problem solver with various experiences relating to offshore/marine and onshore oil and gas operations. Over 35 years experience with a major operating company and contract operating company in Gulf Coast oil and gas production operations; possessing strong interpersonal/communication skills

PhD (Geology), Post MSc Diploma (Hydrogeology), MSc (Applied Geology). Working as GIS Professional and previously worked as Geologist, Lecturer in Environmental Science and GIS Professional.

GIS Expert (Esri & Geomedia)

multilingual engineer with significant experience in geographic information system, able to manage from technical components even administrative components, concentrate in the range of prevention, diagnostic, planning, design, assembly, administration and treatment in air, soil, water and territory

Information Technologies, Windows2000, XP. English, Russian, Turkish

Sound skills on QHSSE matter and Solid knowledge of Chemicals Engineering and wide experience in processing of crude oil and raw sour gas processing (oil stabilisation, gas sweetening and dehydration, liquid-liquid and gas liquid separation).

German Language Malay Student

A position with a construction company which requires skills in field engineering, cost controlling, planning, scheduling, and estimating

CAD drafter

Bachelors Degree in CHEMICAL ENGINEERING with Masters in BUSINESS ADMINISTRATION. Cumulative work experience of 8+ years in Hydro metallurgical Zinc manufacturing company.

I have a Bachelors degree in Geology, and have completed a field geology course that gives me valuable field experience.

Laboratory Analysis, Administration, Safety

CIVIL ENGINEERING; LAND SURVEYING; COMPUTER AIDED DRAFTING (CAD)

ms project,autoCad 2008(2d,Isometric,3d modeling),B.Eng in Metallurgical and Materials Engineering,Planning,cost estimating and control,job schedulling,WBS,manpower and site mobilization,EVA,S-curves,Risk management,Project Evaluation

Instrumentation I&C DCS Technician

M.Sc Environmental Biotechnology (1 yr), Bachelors in Fisheries Science (4 yrs), holding ISO-14001 & Occupational Helath and Safety Assesment Series training certificate.

A chartered marine technologist with a broad cross discipline outlook with particular experience in the legislative, quality and risk management aspects of the upstream oil and gas industry.

Provide Project Control Scheduling Support

Bachelor Degree in Mechanical (Industry)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out