Resume - Electrical Engineer(Testing and Commissioning in substations)

Misco Jobs

Resume #67930

CONTACT INFORMATION:
View contact information...

Date of Birth: 26.10.1976
Sex: Male
Marital Status: Single
Nationality & Religion: Indian, Hindu
Languages Known: Tamil, English

Educational Qualification: Diploma in Electrical and Electronics Engg. from State Board of Technical Education, Tamil Nadu, India
Year: 1992 – 1995
Bachelar of Engineering – Electrical and Electronics from University of Madras
Year: 1995 – 1998
Work Experience: 1999 on wards

Organisation Period Field of Activity
Kirloskar 1999 - 2001 Erection, Testing and Commissioning of 2 x 750 KW Wind Mill Form and operation maintenance
Alfatech 2001 - 2002 Erection testing and commissioning of 6.2 MW Co-generation plant electrics
M/s. ELSYTEC Controls (P) Ltd,
Chennai – 32 2002(FEBRUARY) - 2006(JULY) Testing, Commissioning and Field Support Services for Substations
M/s MEEDCO LTD
DAMMAM
KINGDUM OF SAUDI ARABIA 2006(SEPTEMBER)ONWARDS Configuring, Testing and commissioning of Distance protection relays REL 531(ABB),7SA52(SIEMNS) and over current relay MICOM p142
Nature of work / Responsibilities
Testing, Commissioning and Field Support Services

I. Projects under Elsytec Controls P.Ltd.

1. Power Grid Corporation
Vijaywada – 400 kV & 220kV Switch Yard
Equipment, Control & Relay Panel
I. Shunt Reactors
II. SF6 Circuit Breakers
III. Current Transformer
IV. Power Transformer
V. Lightning arresters.
VI. Isolators / Earth switches.
VII. Wave Trap
VIII. CVT
2. RAPS – Kota, Rajasthan – 235 MW, Unit – IV 6.6 KV & 11 kV Switchgears, Relays and Motor Sections.
Testing of 33 KV Indoor Breakers.
3. SPDCL, APTRANSCO
Tirupathi Conversion of Hi-voltage distribution system under APD
Overseas Experiences (Worked As A Deputed Engineer For the Following Companeys Under Elsytec Controls P.Ltd. )
4. ALBA - Bahrain
Contractor - ETA
Pre-commissioning testing of 220KV / 33 11KV control and protection Panels, 220kVGAS INSULATED SUBSTATIONS (GIS) more than 30 bays,
LVAC, Batteries, Battery charger, inverters AND SCADA
5. JBR And PALM – Dubai
Contractor - ETA
Pre commissioning testing of 132 /11KV SWITCH GEARS (59+59) bays 132kv switchgear- GA Japan
11kv switchgear- TAMCO Malaysia
6. SAUDI ELECTRICITY COMPANY- SECCOA – KSA
AL Wadi Dawaser
Contractor - NCC
Testing of Transformer Relay panels, AVC Relay panels, Feeder Protection panels, including protection signaling equipment
Current Transformer, CT, VTCircuits, Bus Bar Stability, Scheme Check of 150 MVA Transformer at Al-Juba
132 kV substation
Battery and Battery Charger, DCDB Testing and Commissioning at Al – Juba Substation
At Al-Sharafa
132 kV GIS Interlock, Contact Resistance and functional check
Also familiar with on load measurement after Commissioning and
Trouble shooting in the Control Circuits

II. SAUDI ELECTRICITY COMPANY- SECEOA – KSA
DAMMAM
Company: MEEDCO subsidiary OF HUNDAI
Project: Abu Hadriyah Bulk Supply point
380 / 115 KV SUBSTATION
Responsibility: Making configuration, Testing and commissioning of Distance protection relays and Over current relays
1. Make: ABB
Type: REL 531
2. Make: siemens
Type: 7SA52
3. Make: MICOM
Type:p142

II. Alfatech
1. Ambiga Sugar Mills
Trichy - 6.6 KV, 6.2 MW Co-generation Plant Electrics, Erection, Testing & Commissioning
III. Kirloskar
1. Wind Mill Farm
Palladam - 2 X 750 KW Wind Mill Farm testing, Operating Maintenance

Familiarization & Handling Experience in Testing Equipment
1. Secondary Injection Test Kit – FREJA, SVERKER 760 and also other testing Equipments
2. Primary Injection Test Kit
3. Micro ohmmeter
4. Turns Ratio Meter
5. Resistance Bridges
6. Time Analyser
7. Hivoltage Test Kit
8. Power & Energy Analysers

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 151 to 200 of 1515)

Go to Search Parameters...

Brief Description

Assistant professor-Hydrogeologist with 9 years of experience Main fields of expertise: -Evaluation of groundwater resources in various aquifers -Water supply schemes (well design, pumping tests etc.) Participated and led over 60 Research projects from 1995 Full PC and GIS skills

EXPERIENCE Environmental systems design and installation Site assessment and remedial investigation Wastewater treatment systems Project oversight and quality control

Software Engineer with over 15 years experience in the development of software, database designs and real-time software solutions.

Geologist with 7 years of experience. Installation of monitor wells and remediation. Oversight of contractors, report writing, and Health & Safety Officer.

System Engineer Information Technology - Microsoft

Computer literate in MS Windows 95/98 NT, 2000 & XP Edition, AUTOCAD; System Administrator for SMT Production Management System; Specialization on Reflow Oven / Wave Solder Machines; SMD applications expert, Knows to drive

Electrical Engineer(Testing and Commissioning in substations)

Broad knowledge of environmental chemistry and extensive experience in laboratory processes, instruments, equipment, quality assurance and control, analytical tutoring, and environmental auditing in 10 years of professional practice.

Eleven plus years of providing Environmental Management and consulting services experience in Asbestos and Lead Abatement Surveys/Designs/ Monitoring, Health & Safety, Emergency Response, Water Quality Management, Hazardous Waste Remediation, Industrial Hygiene, and Indoor Air Quality.

Groundwater flow and solute transport modelling.

M.E. in Environmental,2000,M.S. in Civil, 1993 Peer Consultants Rockville, Maryland Project Engineer May 2001-January 2003 Conducted research, design and implementation of lime stabilization processes of municipal bio-solids at the Blue plains Waste Water Treatment Plant in Washington D.C.

I have been working with the Mecklenburg County Department of Environmental Protection (MCDEP) since August 2000. I have had the 40-hour OSHA HAZWOPER training.

Consultancy, Teaching, Research, Planning & Design exprtise and experience in Hydrology, Water Resources Engineering, Civil Engineering Systems & GIS inc. as Founder Director, National Institute of Hydrology, Roorkee, India and (Retd) Professor of Civil Engg, IIT, Kanpur

Experienced in directing a team of 5 to 6 Site operators, designating duties, monitoring their performance and providing them with the needful assistance while educating and updating them with relevant information and latest technologies.

Outgoing geoscientist, engineering background, significant experience executing, managing environmental remediation & unexploded ordnance projects. Effective communicator, strong writing, problem-solving, technical, & analytical abilities, enjoys working in a team environment.

Environmental / Safety Engineer More than 10 years experience

Experienced in Hazardous Material Management, Training, and Safety Auditing

Phd in Geology, presently working as a hydrogeologist in central groundwater dept. india for the last 8 years

Interested in long-term career opportunities in the EHS fields.

„X Environmental Impact Assessment (EIA)

Java,J2EE, HTML, XML, JavaScript

BTech in Mechanical Engineering specialised in Designing HVAC systems.........

Electronic integrated controls, PLC control, installation repair and preventative maintenance

Over 20 years with Department of Energy contractor experience with environmental management, remediation, regulatory compliance, pollution prevention, quality assurance and project management/ technical support experience. Excellent written and oral skill level.

Mining Engineer and Geologist with twenty-seven years in precious and base metals, coal and industrial minerals. Professional Engineering licenses in three states, with unique construction and environmental achievements. Advanced technical and strong supervisory skills.

Water industry: French citizen w/U.S. Green card; 27+ years experience in construction & operations and maintenance; electromechanical and site management skills; specialist in process component for W/WW systems

With 28 years international experience in all rigging/cranes/inspection dissiplines it is time to ;Teach others the Ropes:

Hvac mechnical engineer II or III chillers, cooling towers, boilers, heating plates exchangers, ATS, UPS, power source,

Water & Sewer systems design and analysis, master plans, modeling, cost estimates and specifications

Environmental consultant with six years experience of O&G environmental assessment, Phase I and Phase II site assessments, EIAs, due diligence, and mining projects. He is currently based in the UK.

Chemical Engineer with Masters Degree in Environmental Engineering and Management. Areas of experience include, hazardous waste management, remediation & cleanup, environmental impact assessment ISO 14000 and environmental audit.

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

Environmental engineer with 6 yrs. experience

Self-motivated, experienced Engineer with over 8 years of hands on experience and expertise in troubleshooting, installing, and maintenance. I am interested in further developing my present skills and looking for the opportunities to handle new tasks, to acquire new skills and assume new responsibil

New Graduate with BS ChE and Geol. Industry experience!

8+ years exprience in cnc plc programmer , I am competed my Diploma in ECE, BCA, Pursuing M.Sc Electronics and communication

Registered professional engineer with 13 years experience in mineral processing and extractive metallurgy. Holder of BS in Metallurgical Engineering, MS in Environmental Science. Primary focus has been on selective flotation with some exposure to gold leaching, willing to learn additional methods.

Hydrologist - Telemerty IT Manager

Ph.D. computer Engineering M.sc. Electrical and Computer Engineering B.sc telecommunications

SUMMARY A Postgraduate of Mechanical Engineering with Ten years of Industrial Experience in Design Department using CAD/CAM/CAE/Robot Simulation Software and involved in design various Project Installations.

Expert in Environmental Engineering, I plan to work and live in Abu Dhabi.I am qualified in Environmental Protection for: Environmental Certification, Environmental Surveys, and Environmental Pollution Monitoring for Oil & Gas Industry with 10 years experience.

Petroleum exploration 15 yrs, environmental/geotech consulting 15 yrs

Civil/Environmental Engineer

Seeking professional or technical employment in Software Engineering, Computer Science, or Web Development. Offering extensive education and experience in computer science and mathematics.

Expertise in analysis of Chemicals, petrochemicals, petroleum products using instruments like ICP-OES, GC, HPLC, AAS, FTIR, CS Analyzer etc. Having expertise in SPC / SQC techniques, LIMS and SAP QM module. Research in Petrochemical and petroleum products. Worked for Chevron Oronite lube additive co

Environmental Health and Safety Auditing , Preparation of EIA & EMP Reports , Proficiency with Regulatory Compliances , Air Quality Modeling & Prediction, Contaminated Site remediation, GIS Image Processing and Mapping , Chemical analysis

B-Tech(electronics/communication)

I am in plastics profession, making moulds,mould design,conversion of metal part into plastic material, developing tool for prototype product,plasssssstics material selection for new product, concept development works, do hand sketches,mouldflow anaysis plastics product, updating myself for new,

Environmental Specialist

I am basically possessing engineering background with enough experience in organisation and can able to perform all kinds of works pertaining to my field. i am having 10 years of handful experience and can deal any work effectively and complete the same within time schedule.

1 2 3 [ 4 ] 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out