Resume - Experienced chemist with over ten years working in EOR/IOR projects associated t...

Misco Jobs

Resume #68383

CONTACT INFORMATION:
View contact information...

KEY COMPETENCIES

*Petroleum Laboratory management
*Setting up, adjusting and operating laboratory equipments
*Control processes in laboratory and bench scale
*Special and conventional core analysis. Coreflooding Studies
*Water/Gas and chemical flooding to IOR/EOR projects.
*Formation Damage and Heavy oil enhancing
*Strong Knowledge of Organic Chemistry
*Chemical formulations development
*Physical chemistry of polymers & surfactants
*Technical support in onshore/offshore operations
*Field/plant production fluids Samplings
*Handling/Treatment/Separation of oil/water samples.
*Knowledge of standards ISO-9000/ISO-14000
*Promotion of chemical products.
*QC/ Chemical analysis by ASTM/API Methods, UV-Visible spectrometry and HPLC.

PROFESIONAL EXPERIENCE

2005 –2007 (Present) Neotechnology, C.A, Venezuela – Germany
Laboratory & Field Chemist

* Coordinate and perform laboratory studies to evaluate new technologies to enhance oil & gas production. Evaluation of chemical formulations to sand control involving the following technical parameters: Porosity, Permeability retention, pore volume optimization, injection rate, proppant types, temperatures, pore pressure, initial fluid saturation, confinement pressure, fluids compatibility in aqueous and non aqueous systems, chemical preflush, among others. Treatment and separation of oil water samples. Fluids rheology
* Develop rock specimens under P/T controlled conditions to evaluate curing time, type of chemical formulations and evaluate mechanical properties through UCS and PLT.
* Evaluate gelling time in static and dynamic conditions using different starters of polymerization.
* Design and set up equipment to evaluate different processes at reservoir conditions. Maintenance and calibration of laboratory equipments. Calibration gauges, transducers, high-pressure syringe pumps.
* Serve as a sale representative promoting chemical products
* Design of methodologies -standard operating procedures (SOPs)-state of the art studies

2003/2005 Universidad Central de Venezuela, Petroleum engineering faculty.
Technical Support Chemist

* Responsible for the reactivation of the PVT laboratory. Maintenance and calibration of PVT equipments: Blind liquid phase PVT Cell and volatile/condensate fluids cell. (Compressibility up to 8000 psi). Calibration of rolling ball and Brookfield viscosimeters
* Served as technical support to undergraduate students & technicians in the reservoir rock and fluid properties laboratories from petroleum engineering faculty. Water/sediments, air/water permeability, porosity, fluids saturation, capillary pressure and ASTM/API methods.
* Worked in an experimental methodology to eliminate phenol from phenolic wastewater effluents of a naftenic acid plant by a laboratory ozonation system.

1989/2003 Research Centre of PDVSA-INTEVEP, Venezuela:
Advanced professional II; Activity Leader for La Salina project and Professional I, Laboratory and activity coordinator for Lagomar project. Offshore projects. 1996/2002,

* Designed, organized and performed laboratory activities to establish alkali-surfactant-polymer (ASP) formulations to the reservoirs LL-03 and VLA 6/9/21, involving fluids characterization, conventional and special core studies. Fluids studies involved: phase behavior to oil-water-surfactant systems, optimum polymer concentration, critical micelar concentration and ultra low interfacial tension to surfactants. Rheological behavior, molecular weight effects, thermal stability (bottle tests, anaerobic chamber), fluids compatibility, solubility, interfacial phenomena and compatibility of polyelectrolytes and additives in formation, injection and soft water. Evaluated Antiscalants. Conducted Coretestings and Fluid-rock interactions tests: chemical retention, Absolute and relative permeability, capillary pressure, wettability, porosity, pore volume and oil recovery.
* Studied the surfactant/polymer interactions by rheology and tensiometry.
* Contributed to the technological risk analysis for an ASP full field application and worked as a part of a team to generate a pilot design to determine the effect of gas lift on the produced fluids and the effect of the transport of injected blends on the viscosity at the experimental well "CEPRO"
* Coordinated and oversaw the quality control and preparation of whole slug of ASP injected in the well 1325, during the pilot test "SWCT" to evaluate the efficiency of ASP process in Lagomar field (offshore). On-site inspection of the barge facilities to evaluate mixers and tanks integrity. Installation of equipments required to monitor and ensure the quality of the polymer and surfactant blends, previous the pilot test
* Performed water/oil separation in the field using portable separator and demulsifiers. Oil and water (Brine) tests by ASTM, API and SMWW methods.
* Analyzed asphaltenes content, water and sediment content in crude oil by (ASTM 4007-02, API MPMS Ch. 10.3/10.2), density, specific and API gravity, carbonates and bicarbonates in brines (Alkalinity), chlorides, total dissolved and total suspended solids in brines.
* Served as a technical support in project "Exploitation and unconventional uses of heavy and extra heavy oils" to demonstrate the cracking and hydrogenation of heavy oil by electrochemical treatment.
* Technical support during the injection and sampling of tracers in the Lagomar field.
* Supported the preparation, mixed and injection of emulsions with heavy oil at the FN-2 well, Furrial field.

Associated Research Technician III (Field technician) to both Projects "Support to the Integrated Studies to the fields: Centrolago (offshore) and El Furrial(onshore)". 1992/1996

* Investigated the fluid-fluid compatibility and fluid-rock compatibility through filtration tests and fines migration studies (critical velocity) on oil free and aged cores and helped scale data to field condition.
* Carried out reactivity tests of heavy oil to activate natural surfactants.
* Sampled oil-water to extract chemical and radioactive tracers to monitor water breakthrough in production wells and sampled H2S at wells of the Furrial field. Designed and improved the laboratory facilities for treatment and separation of oil/water samples containing tracers using demulsifiers, ultrasound and electrical treatment. Collaborated with the risk analysis using the methodology "What IF" to use this process in laboratory.
* Sampled light oil with needles on well head and well pipe (HP&HT) to geochemistry analysis.
* Selected and evaluated HT resistant polymers and its blends with alkali-surfactant for HT reservoirs.

Principal Research Technician, Reservoir Technology Department, 1989/1992

* Set up systems with different types of porous media and handled the tomography technique to evaluate the distribution of fluids inside the cores.
* Performed extra-heavy and heavy oil thermal treatment tests using hydrogen donors, methane, water and steam in static & dynamic conditions. Evaluated the steam injection with solvents on heavy crude oil. Characterized these samples by density, °API, viscosity and thermal analysis.
* Conducted the preparation/injection of polymer/biopolymer solutions in reservoir cores to evaluate flow parameters; injectivity, resistance factor (RF) residual resistance factor (RRF), brine injection, oil recovery and polymer retention, monitoring polymer concentrations by UV-Visible spectrometry and HPLC.

EDUCATION
2000 BS in Chemistry (Technology)
Universidad Central de Venezuela, Caracas, Venezuela

1986 Associated degree in Chemistry
University Institute of Technology Capital Region, Caracas, Venezuela

OTHERS SKILLS
* Microsoft Word, Microsoft PowerPoint, Microsoft Excel, Basic reservoir simulation with STARS
* Languages: Spanish: Mother Tongue/English: Spoken and Written (High Intermediate Level)
* Supervision of small group of professionals and students in laboratory and field work
* Analysis, treatment and purification of gold of mines and jewels. Goal-oriented/Fast learner/Innovative
* Data/results interpretation and preparation of progress/final reports
* International exposure during technical visit to partners in North America and Europe
* Co-author of international technical publications in chemical flooding (EOR)

NOTICE PERIOD: One month CURRENT LOCATION: Venezuela

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 1484)

Go to Search Parameters...

Brief Description

I¡¦m a Canadian/ Syrian citizen with Business, Engineering, Water/Wastewater and (HSE) Health Safety Environment Background I have been working in the field of HSE (Health Safety Environment) management for past 10 years/ 5 yr Management HR BUS PR Project GS ADM OPS

I have acquired strong financial analytical skills including discounted cash flow modeling

I am a site acquisition specialist with a 3+ years of experience, i have skills in g.i.s. and the use of various softwares in g.i.s. as well as windows packages

Lean Master and Master Black belt instructor, facilitator and coach currently with BMG (Breakthrough Managemnt Group). Main function currently as Six Sigma and lean account executive responsable for the deploymemnt of Lean and Six Sigma initatives with various local and international orgenisations.

1. Implementation of Quality Management Systems (New and Old versions)

Safety, Hazardous Materials, Gas Turbine Engine Experience, Pruhdoe Bay Oil Field Experience

Geologist

I am continuing my 4 year B.Sc course in Materials and Metallurgical Engineering in BUET in Bangladesh.

I have 20 yrs experience as a surveyor. I was trained in the U.S. Army as a Field Artillery Surveyor. I have experience on highrise buildigs and sub-divisions. I have surveyed oil and gas pipelines and power line routes. I also worked on marinas providing layout and volume reports.

Operator - Track hoe, Horizontal Directional Drill 1.2 million lbs. -- Experienced in oil pipe line construction and safety - Knowledge of gasoline and diesel engine maintenance - Locating Equipment experienced and qualified

I want to work in the field of Petroleum /oil/ gas / enviromental sciences

Automation and Instrumentation Specialist. College diploma in industrial electronics (Teccart Institute) option: regulation, instrumentation and automation. Graduated with distinction, May 1999.

14 yrs. in the A/E industry

Geologist

Twenty five years experience in Safety, Health and Environmental Inspections, Supervision and Management

I did BE Mech in 1999. I've Five years Experience in Die Casting field. Experience in Design and Manufacturing of Pdc dies. My skill is to prepare the fmea meeting of designing area with checklist presentation ie. functional & design related points and then all the drgs are submitted to Mfg team.

BS EE, Program/Project Management, Business Development, MS Project, Oracle Financial Analyzer, Data-Voice Value Added Service projects & business, GSM 900 infrastructure (Ericsson) deep knowledge, Wireless and Service Engineering Planning, MS Office, IP Networking

A generalist HSE Manager with experience in oil & gas industry at several international locations with HES / Project Engineering / Operations background. HES Program development focus. Culturally sensitive.

Researched and implemented a 32 X 32 CMOS Image sensor using ‘Cadence cmosp18 tech. Implemented the schematic circuit design and layout for Active Pixel Sensors (32 X 32), 32 CDS units and 32 differential amplifier units.

Experienced chemist with over ten years working in EOR/IOR projects associated to laboratory and field to the oil & Gas industry in Venezuela. Coordinated and used different analytical equipments, methodologies and facilities, following standard procedures of laboratories and operations

Free! A seasoned, highly organized construction professional with over 39 years of heavy industry experience which includes both industrial construction sites and field/shop fabrication locations in all major industries worldwide

I am a Canadian, "Hands-on", Project Manager/Superintendent interested in International work again. My extensive experience is in Heavy/Civil and Oil & Gas Pipeline Construction. I have a reputation for completing on-time, safe and cost-effective projects in various climates and nationalities.

I am an experienced Mechanical Engineer in the field of Design & Welding (IWE) Engineering. I obtained my Dipl-Ing. certificate (equivalent of MSc(Eng.) in Design and Construction of Agricultural and Construction Machinery from the Technical University of Berlin in Germany

Drafter/Designer-Entry Level with some experience

Masters in Mechanical Engineering - 2004, Bachelors in Mechanical Engieering – 2001, Computer awareness:Auto CAD, MS Office, MS Projects, Power Point Presentations; Trained & Certified for Health, Safety & Environment - IOSH

Gas turbine expert, Engineering, Rotating Equipment technician,MechanicalEngineering

Data manager with over 10 years of experience in the mineral exploration industry providing high quality digital tools, data and information to geoscientists. Extensive experience managing IT projects and services on an international environment. Strong analytical, organizational and technical skill

Fresh Mechatronics Engineering Graduate

Oracle dba, technical support

Java, JSP, Servlet, J2EE, JSTL, SQL, PHP, ASP, XML, HTML

Highly motivated geologist with an Msc in engineering geology based in the UK looking for a growth oriented job in oil and gas industry that will provide me with relevant professional experience. Accustomed to a fast-paced multidisciplinary environment where deadlines are a priority. Good organisati

Can work with computers, good communication skills, team player, can work under pressure

Bilingual (English and French) Engineer with +13 yrs Petroleum Production, Wellsite and Operations experience in Oil & Gas and +3 yrs in Construction and Environmental work. Worked for Shell, Vermilion and Maurel & Prom in Africa, Europe and North America. US resident.

Drafting, estimating, typing, computer literate: MSWORD, MSEXCEL, COREL DRAW, AUTOCAD, POWERPOINT, PIPES & PIPES++

Transport & Logistics Safety (HSE):Road Safety Monitoring, • 3PL Contractors/ Subcontractors pre start up HSE Audits (HSE MS, HSE Plans, Documentation Control, Vehicles Roadworthiness Inspection, Drivers Competency Assessment, Workshop Audit, Transport Routes Survey, etc.)

mind setter for Safety, and condition builder

A highly motivated and enthusiastic analytical chemist seeking a full time laboratory position. Team-player as well as individual worker. Well-organized, detailed oriented, quick learner.

Precision Millwright, Welder. Turbines, Power Plants, Ethonal Plants, Steel Mill Plants.

Big believer in teamwork, organization and co-operation, have the ability to perform well under pressure, hard worker, able to behave as a leader, manage stress.

I am available for all your open positions regarding my qualifications - Technical/Managerial/Projects positions, throughout Europe/Middle East & Africa.

I have held management/technical positions with the companies listed within my resume for over 20 years specializing in construction, environmental, mining, mineral/material processing and chemical manufacturing businesses. I have significant experience in all functional areas & P/L responsibility.

I am mechanical engineer 2002 ,I work as site engineer in the construction companies.

I am a highly experienced and enthusiastic Electrical, telecommunication, electronics and computer Engineer, especially in the mechanical and electrical field, currently working as a maintenance manager, looking for a challenging job where my experience, education, background, certifications and tea

An enthusiastic and professional Engineering Manager; chartered mechanical Engineer, who enjoys being part of, as well as leading, a successful and productive team. Quick to grasp new ideas and concepts, and to develop innovative and creative solutions to problems. Able to work well on his own initi

I am a Broadcast Technician ZBC-TV in Zimbabwe. In March 2006 I completed a 4 year apprenticeship with ZBC-TV and have worked as permanent staff ever since. I am a Class One journeyman and hold a National Diploma in Electronic Communication Engineering.

Free! Canadian geologist, speak fluent English, Spanish, French. 8 years experience Canada, USA, Mexico, Congo, Marocco. Geologist/Project Manager

I am trained in on-site and laboratory calibration of instruments and specializes in water quality testers and analyzers. I am also familiar with softwares used in engineering and design. I am knowledgable in PLC programming and capable of troubleshooting program errors.

I have work experience in United States, SE Asia, and China. I am a registered Professional Engineer (Civil) in State of California, USA. I am looking for a professional/managerial position in civil engineering/construction. Project experience and publications are available upon request.

With a stong technical and innate combination of managerial skills i woul like to apply them to the real world situations an dreach the highest pedestal.

Skills: Auto CAD versions 9 thru 2006i, Prime Medusa, UNIX, Micro Station, Microsoft Office, along with several other computer based applications.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out