Resume - Qualified health and security manager. Experienced in leading H&S supervisor on...

Misco Jobs

Resume #68987

CONTACT INFORMATION:
View contact information...

Languages:
French (Excellent)
English (Very good)
Spanish (Very good)

Academics:
2003- Today Ecole Polytechnique
Ph D. Industrial Engineering (Human Factors, Project Management)

1997-2001 UQAM
Ms. Sc. Ergonomic and Health & Safety

1995-2000 University of Montréal
Bacc ès Sc. Major Health and Safety, Minor Management

Other formations:
Introduction to international management and import-export
Introduction to management accounting
Project management – Lifecycle of a product – Ergonomics and Safety

Work Experience:
1985-Today Gaz Metropolitain
Emergency Specialist Natural Gas Piping and
Maintenance (high and low pressure gas equipments)
In detail: supervision of employees and contractors engaged in the operation and maintenance of natural gas handling facilities and related equipment. Ensuring the safe, reliable and efficient operation of natural gas transmission and storage facilities and equipment. Monitoring and inspect job sites, facilities. Maintaining a proactive planning and scheduling process to effectively utilize manpower and complete tasks within the time schedules established. Train employees on operational methods and practices.

- Hands on experience in plant production,
- Emergency response procedures,
- Spherical, conical et ball valves maintenance,
- Regulators, slam shuts, relief valves maintenance, replacement
- Corrosion detection and maintenance specialist. At ease with passive or active protective systems (anodes or redressors). On pipelines, tanks or other steel structures.
- Pipe locating and inspection
- Post excavation inspection, digging regulation

1999-2001 Beaver Asphalt
Health and Safety Manager for road and bridges construction
On site HSE policies
Protective equipment management
Construction rig supervision both on water and on land
Crew managing, planning and quality control

1999- Today Sciences Sans Frontières
Consultant for health and safety issues
Hazardous material handling
Environmental regulation specialist

2000-Today Ecole Polytechnique
Substitute teacher (Human Factor related classes)
Confined spaces, H2S hazards, locking procedure

2001-2004 Global Spec Consultants
HSE specialist
On site HS policies in South America and Caribbean's

Realisations:
Elaboration and implementation of HS policies in various oil and gas environments, in different countries, mainly Canada, Cuba, Mexico and Venezuela

Elaboration and implementation of enclosed spaces procedures

Elaboration and implementation of lock safety procedure
Implementation of prevention programs (factories, chain production factories, construction sites)

Manager of H&S department in bridges & roads construction company

Productivity analysis for single workers and departments

Conception of different machine-user interfaces

Implementation of a Health and safety program for pipeline maintenance Matanzas (Cuba) in collaboration with University of Matanzas

Organisation of a cooperation mission in Cuba (École Polytechnique- University de Matanzas)

Health and safety Assets:

Knowledge of many countries (and some provincial) HS regulations and policies
Knowledge of NIOSH (USA) CCHST (Canada) and CSST (Quebec) policies and regulations
Vast experience in HS risks evaluation (tools, postures, chemical and physiological exposures, handling, ambient conditions including cold and tropical climate risks, night work, vibrations and mining environment
H2S safety certification
Oil plant security certification
Hazardous material handling, storage and identification
Individual Safety Equipment management (evaluation and buying process)

Standards and regulations assets:
I have worked with these different standards and regulations. My degree of knowledge varies from general to specialist. I have listed only those I have worked with enough to have a good understanding and be efficient using them:
ISO 9001 and ISO14001
IEC 61508, 61511, 62061
LRQ S 2.1 (Quebec Health and Security Law)
LRQ S 2.1 r.9 and r.15
CSA Z1000-06

Management assets:

Supervision of junior health and safety coordinators (Sciences Sans Frontières)
Supervision of students in different industrial « on-site » projects
Supervision of union workers team

General Assets:
Excellent team worker
Very god communication skills
Easily adapt to new situations
Very good observation, analysis and synthesis Multidisciplinary knowledge in Industrial Engineering
Used to work in a union work environment

Computer and tech skills:
Software: Microsoft, Microsoft Project, DOORS, Paper Port
Hardware: Accelerometers, gas detectors, vibration accelerometers, dust, light and sound meters

Certifications and permits:
Driving licence class 3 (Drive anything but semi-trailers)
Plastic fusion specialist for gas piping
Security Card for construction site

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 1513)

Go to Search Parameters...

Brief Description

10 years Auto cad work experience with Design & Drafting background in the field of Fabrication structures, Sheet metal, Conveyors and Material Handling systems

Qualified health and security manager. Experienced in leading H&S supervisor on oil and gas plants or on remote site. Also have experience on construction site. Implementation of H&S programs, accidents and incidents investigation.

Project Engineer Automation Controls Instrumentation PMP Certified 9+Years exp Plant Automation PLC SCADA DCS Project Manager CAP

Project Engineer wit BSc of Chemical Engineering and experiences in oil and gas

Operating Engineer

Perform concurrent duties of a project manager which involve the management of several Aramco and non Aramco projects in close coordination with the client and/or his representatives and with the engineering design team

Mechanical Engineer with proficiency in IDEAS, Nastran

A dynamic accomplished Information Technology Professional with unique combination of experience in Networking and Hardware. Strong Analytical, Organizational and problem solving skills. Ability to identify Operational Deficiencies, skilled in applying Technology and Administration practices to impr

Mechanical engineering finite element analysis composites ansys Master's

PLANNER SMELTER

Mud engineer/ mechanical engineer/ hse advisor/ compliance and standard/ maintenance supervisor/ general inspector and supervisor

AutoCad Mechanical Desktop AutoCad Inventor 3D Modeler

PDMS-11.6, PDS-7.1, Autocad-2006, CAEPIPE 5.11, Pro-E Wildfire2.0

Handled operations Batch Chemical Processes, Fermentation, Distillation, Extraction, Evaporation, Plant Utility Section, Pumps & Compresors, Safety of 3M's and Housekeeping, Maintenance & Overhaul of Operations, Troubleshooting, Startup & Shutdown of the operations in the cGMP environment etc.

analyst

Bachelor of Engineering (Electronics & Communication) ,A.I.V.,A.M.I.E.

7.5 Technical experience, guidance and command in all analytical and environmental based activities, services, management and techniques.

Degreed Electrical Engineer with Pro/E Wildfire 2.0 and Pro/Cabling training

Analytical: Good use of both traditional `wet’ chemistry and modern instrumentation techniques such as HPLC, GC, FTIR, ICP, MS etc. Broad knowledge of oilfield chemicals and their chemistries, mode of action, active constituents and formulations. Good understanding of statistical quality control

I did both undergrad and master's in mechanical engineering with broad range of experiance both in mechanical engineering along with IT

AUTOCAD, HYSYS (PROCESS SIMULATION AND MODELING), H.S.E COMPETENCE PROFICIENCY (SPDC AND NISP), BACHELORS DEGREE IN CHEMICAL ENGINEERING- SECOND CLASS UPPER DIVISION.

10 Years Working As A Cartographer For QARUN Petroleum Company

Working experience - 16 years & 3 months. Highly skilled, experienced, expertise and knowledge as a driller

A fully qualified GIS specialist with experience in the delivery of major asset management projects. Adaptable to business requirements, with management experience. Well versed in the use of ESRI ArcGIS 9.1, WINGS 2.4.10, AutoCAD 2008, Corel Paint Shop Pro XI. IT literate.

E-Business,E-Tendering,International Business Development

FELONY conviction disclosure! Experienced metrologist, industrial electronics repair, computer/network systems analyst looking to reenter tech industry.

Strong knowledge in electronics industries PCB design, assembling, trouble shooting

Bachelor’s Degree in Mining Engineering, Faculty: Petroleum Geology and Geophysics, and Chicago Oakton Community College Faculty: Computer Science.

Experience in Project management w.r.t Electrical, Electronics, IT and Telecommunications, Mechanical equipments, Oil & Gas, and Civil construction equipments, Automotive Industries, Civil Constructions, Project Management, IT / BPO Services, Food and chemical Industries and service sectors

Professional mechanical/industrial engineer seeking a project engineering managmenet or consulting position. Offer extensive engineering and management skills in the industry.

Master of Science in Mechanical Engineering Zone and Energy Manager, Facilities Maintenance Manager

Principal & Project Engineer experienced working Oil & Gas and Industrial electrical projects.

Hard working and Dependable Environmental Professional

Eletro/Mechanical Technician, Applications Engineer

Pro Engineer 2+ years experience

Graduate Chemical Engineer - Looking for an Internship/Co-op/Full time position in the field of chemical engineering.

I have an ability to grasp new concepts quickly and clearly to apply my knowledge and experience for tackling tricky situations.

Visual C++, C#, Visual Basic, Java, J#, Pascal, PROLOG Tools:1.Professional: Microsoft Visual Studio.Net, C builder, Java Visual Age, SQL Server 2000 2.User level: Microsoft Office, Visual Studio, Web Studio, Oracle 9i, Scripting and markup languages: HTML, XML, XSL, VBScript

I WAS DONE B=TECH IN MECHANICAL ENGG WITH 72% MARKS & ALSO DONE DIPLOMA IN MECHANICA;L ENGG & I HAVE ALSO THREE YEAR WORK EXPERIENCE

1 year Wellsite Geologist/Mudlogger; 7 months experienced Varian Gas Chromatography; 2.5 years experienced Staff & Project Hydrogeologist and Environmental Field Technician

hands on experience in hardware and software design, circuit and PCB design, microcontroller circuit and firmware design

Post Graduate with over six years of experience as Geologist with various organizations

A highly motivated and well qualified Chemical and Process Engineer with high experience in Mineral Inspection, Mineral Sample Preparations Mineral Processing and Mineral Auditing Films, Analytical Laboratories and in Processing Industries ready to work under pressure in either a group or independen

Logistics, Technology, Transport and Management Professional

Speak arabic as native and english language (fluent) capeable of using micosoft office ,xl,power point.

Supervising, Inspection, Installation, Maintenance, Computer application and coating specialist

Initially degree qualified as an Electrical/Electronic Engineer, I have been working in the field of DCS Control systems for the past 25 years. I have worked as a Field Service Engineer, Application Engineer, Systems Engineer, Commissioning Engineer. Primarily with Foxboro systems.

Worked for Mckenzie Forest Products for 25 years 12 years as a Supervisor

I am electrical diploma holder,having ten years experience in variety of field like textile company,power plant and research centre.I desire to settle in Australia for betterment

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out