Resume - 12 years experience in instrumentation mining processing plant.holder of a craft...

Misco Jobs

Resume #69013

CONTACT INFORMATION:
View contact information...

Date of Birth: 22/12/69
Place of Birth: Chipata
Nationality: Zambian
Sex: Male
Marital status: Married

B. EDUCATION BACKGROUND AND TECHNICAL QUALIFICATION.
YEAR SCHOOL QUALIFICATION OBTAINED
1976-1983 Chama Primary School Grade 7 School Certificate
1984-1988 Chama Secondary School Grade 12 school certificate
1991-1993 Instrumentation Training Craft Certificate in process control
School. ZCCM. Kitwe. Instrumentation.

C. PROFESSIONAL QUALIFICATION
YEAR COLLEGE ATTENDED QUALIFICATION OBTAINED
1997 Home study with CIPS First certificate in purchasing and supply
2004 Home study with CIPS Advanced certificate in purchasing and supply
2005 Home study with CIPS Graduate Diploma in purchasing and supply
(Foundation stage)

D. SUMMARY OF WORKING EXPERIENCE.
YEAR COMPANY JOB TITLE
1993-1998 ZCCM/RAMCOZ. CONCENTRATOR. Artisan Instrumentation 1998-2000 RAMCOZ PLC Materials co-coordinator 2000-2004 KCM (Nkana) FLASH DRYER Instrumentation Technician
2004 - 2006 Kansanshi Mining Plc Instrumentation Technician
2006- Date Chambishi metals plc Instrumentation Technician.

E. PRINCIPAL ACCOUNTABILITIES AS INSTRUMENTATION TECHNICIAN.
a) Carry out planned maintenance on Automatic valves and repairs on defective ones, thus overhaul, service parts, assemble, check operation and then do the installations. Valves worked on include saunder valves, El-o-matic valves, butterfly valves, power cylinder valves, and Samson valves, pinch valves.
b) Carry out installations of weightometre and calibrations. Thus installation of weight frame and alignment and also field and panel wiring. Models worked on include Ramsey model 20 -40, Micro-tech 10 -201 and 10 -30 and also process Automatic weightometers model EMB -220, version Embe - 220, 40 -06.
c) Instrumentation Control systems worked on include the following; Spec 200, profibus and DCS (Distributed control system).
d) Carry out checks on PH transmitters and probes, thus clean probes, then buffer check with PH7 and PH4. Models worked on Endless and Hauser MYPRO CPM431.
e) Do planned maintenance on density meters, thus check parameters and against known sample, type worked on; Thermo electron corporation model Am 770 version 3 software.
f) Planned maintenance on level transmitters and also programming. Endless and Hauser prosonic - m and vegason 61 level transmitters.
g) Worked on flow meters thus prosonic and promag 53, promag 50 and promag 35. Installation and programming them to suit the pipe and process. Endless and Hauser models.
h) Carry out checks on fire alarm system (smoke detector) to ensure quick action in case of fire using carbon dioxide fire fighting system.
I) Turning of controllers and instruments to suit the process condition. Proportional, derivative and integral (P.1.D)
j) Carry out planned maintenance and checks on programming logic controllers (PLC). Models worked on are Allen Bradley, Toshiba Houston, Siemens and Mitsubishi.
k) Check on water purification loop (chlorinating) to ensure right amount of chlorine is added to the domestic water.

l) Laying cables, tubing's for new installations or replacements.
m) Carry out maintenance on Spec 200 Annuciators for interlocks n) Carry out planned maintenance and repairs on oil lube system for Sag mill and Ball mills. Bearing lube system, trunion bearing, grease seal and girth gear lube system.
o) Carry out maintenance and repairs on VSDs (Dan Foss VLTR 5000 variable speed drives).
p) Carry out bench repairs, calibrations of controllers; speed seasons for weightometers, current to pneumatic converters, level transmitters, pressure gauges, pressure switches and other instruments.

q) Circuit modifications, wiring, and repairs faulty finding on belts feeders. Models ASHE and GEC motor speed panel (3 phase thyristors control)
r) Carry out checks, repairs and installations of resistance temperature detector (RTD), thermocouple, pyrometers and thermistors.
s) Have worked on current to profibus converter 4 -2Oma to FB converter. Smart IF
303.
t) Worked on profibus to current converters PB converters to 4 -2Oma smart Fl 303.
u) Planned maintenance and repairs on the filtration plant (LAROX FILTER) by Rexroth Bosch Group.
v) Planned maintenance and repairs on the copper Cathode stripping machine by Mesco incorporation Japan.
w) Worked on CCD's Bed level system using the magnetic Reed system. Planned maintenance, repairs and weekly calibrations.
x) Worked on turbidity meters on the CCD's clarifiers. Planned maintenance, repairs and calibrations.
y) Ensured instruments have a right address before installations. (profibus).
z) Have worked on the profibus system, a series communication system. PA and DP. PA (process Automation), DP (Decentralized periphery)

F. PRINCIPAL ACCOUNTABILITIES AS MATEERIALS COORDINATOR.

a. To make available a balance flow of spares and other equipments for the concentrator.
b. To draw spares from main stores for departmental stores using requisitions.
c. Ensure goods received meet the required standard d. Advice the planner on right stocking levels.
e Help source some spares from suppliers that are out of stock and are urgent.
f. Chase or Expedite goods or spares, which are in dangerous, stock levels.
g. Ensure there is good security on doors and roofing of the stores.
H Account for the receipts, issues and goods in stock within the store. (Stocktaking)..
I. Ensure good house keeping and proper stocking of materials in the stores

G. SHORT COURSES I SEMINARS ATTENDED 1994: Attended short course on trouble shooting Electronic equipment, computer software and introduction to programmable logic controllers (PLC). 1997: Seminar on Basic supervisory course.
1998: Seminar on advanced supervisory course.
2001: Computer course at copper net (Kitwe) on Microsoft word and Microsoft Excel.
2003: Computer course at Ikon (Chingola) on Microsoft Access (2000 Intro/Intermediate)
2003: Two weeks course in South Africa on the operation of the Flash Dryer. (Anglo Platinum). 2005: Attended a five days course on VSD s (variable speed drives) in kansanshi mine plc.solwezi by simation of South Africa.
H. PROJECTS DONE.
1. Putting up loop for Davcra cell level control system thus; level transmission, controller and saunder automatic valve.
2. Installation of Temperature recorder for ball mill Temperature Monitoring on bearings.
3. Installation of Thyristor Controlled Direct current belt feeders.
4. Installation of weightometer scale, major calibration and commissioning.
5. Commissioning of flash Dryer at KCM Nkana smelter.
6. Commissioning of processing plant at Kansanshi mines Plc. Solwezi.
I. HOBIES
Playing chess, watching football, listening to music and traveling.

J. REFEREES
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1301 to 1350 of 1545)

Go to Search Parameters...

Brief Description

12 years experience in instrumentation mining processing plant.holder of a craft certifitecate in process control instrumentation.

4.5-years experience - project management, construction economics, control, contractual compliance, AutoCAD, 4-D scheduling, cost estimation, risk analysis and probabilistic modeling, technology consulting, work breakdown structures, project financial analysis.

Chemical/Natural Gas Engineer

Education: M. Sc., Chemistry, Specialisation: Heterogeneous Catalysis; Work experience (current occupation), Researcher, Subject: Preparation supported metal catalysts, Goal: Development self-invented technique; International experience: Manager & windsurf instructor, Aruba, Dutch Antilles

A graduate of a degree in Bachelor of Science in Chemistry and having passed the Licensure exam for Chemists given by the Professional Regulatory Commission. Have five-year meaningful experience in Analytical Chemistry.

HSE ENGINEER AND SUPERVISOR

Graduated 09/2004 in Master of Science (Mechanical Engineering) from The University at Buffalo, The State University of New York. Emphasis: Design Optimization. 8 years experience in facilities management (water, fire protection). Extensive experience in South and South East Asia.

Livelink Administrator, Causeway Collboration Administrator

Geologist - Planning - Production - Development - Drilling - etc.

Maintenance Technician

Marine Geologist with experience in Bathymetric, Oceanographic, Geophysical and Geotechnical Data Processing and QA/QC. Proficient in MicroStation, uSMART and InRoads mapping softwares.

I have the qualifications and experience you are seeking. I am certified as a Journeyman Refrigeration Mechanic, Journeyman Electrician, and Controls Technician. My experience includes over 17 years in construction and service of mechanical systems.

Seven years of hands on mining experience in surface and underground mining of rock salt, silica sand, high alumina clay (fire clay), and limestone

Supply Chain and Procurement Professional with international oil and gas project experience!

cnc edm machinist over 8 years of experience

geological,geotechnical and hydroegeologiacl investigations

Rangeland Ecology and Management Degree

Objective: To gain professional experience and apply my knowledge on the IT and Telecommunication

Diploma in computer engineering from state board of punjab

Environmental Geological Scientist

Technical Writer / Editor and Proposal Writer

More than one-year experience in the oil and gas fields (exploration and production) as a wellsite geologist on many rig sites in Oman. I have a good practical and theoretical knowledge of the geological settings of Oman, preliminary geological analysis, wellsite logs (LWD, MWD, and Wireline)...

Exp. in nitrogen,snubbing, workover,and also have class A CDL w/ tanker endorsement

Five-year experience in metallurgical projects from the Gold and Nickel industry. Two-year plant and pilot plant experience. Speak, read and write English and Chinese (Mandarin). Familiar with pressure leaching at high temperature.

Working in the Safety and Environmental for the Manufacturing, Oil and Gas and the Wind Industry

Project Manager, Civil, Geotechnical, Offshore, Engineer, Mining, Oil & Gas, Pipeline

Strong knowledge in Computer

Having 11 years experience in electronic, electrical and mechanical system and instrument related breakdowns, up gradation and project work as a technician. Recently get Australian Permanent residential visa on 3 rd Feb 2008.

I bring assorted skills to any position. I have a degree in Mechanical but have been in a Civil environment for the past few years. I also have field work experience. In addition, I have a strong computer background.

Seeking career prospects in metallurgical processing/project engineering, new materials and novel processes, micro structural characterization, project management encompassing business and engineering and other opportunities which require creativity and non routine assignments

Basic Refractory Research & Development Engineer,

high communication skills, got BSc in chemistry, very active, Ambitious . egyptian

A postgraduate in Chemical Engineering with an Industrial Experience of more than 16 years in both Process and Project Engineering.

SAP PM Functional Specialist Qualified, BS in Industrial Technology, Extensive maintenance background, a total of 18 years including 8 years SAP experience in PM Module. Sound understanding of other modules interfacing with PM such as HR,FI/CO,PS and MM.

4 years of experince in electrical maintanence related with energy management

BS in Computer Science, Certificate in Basic Petrochemical Operator Training, Certificate in HVAC, 608 Universal Technician License, and 609 IMACA Technician License

Overall my known skills cover the realm from operating sophisticated computer equipment, data modeling and statistical programs, as well as, more traditional work related skills. From builing and designing landscapes and homes, to construction of reclaimed habitat, I have a varied skill set.

Automotive, Tourism, OSH

Working for about 9 years with multinational construction companies and consultancy firms in large scale international projects is my solid base upon which I became a Professional Civil Engineer. Aware by Quality and Safety Management Systems, Civil Engineering International Codes and standards.

Mechanical Engineer with 8+ years of professional experience, with a solid background in QA/QC, Consulting, Inspection, Quality, and special services for the oil & gas, mining and construction industry.

Environmental Management especialist, computer skills (CCNA 2.0, Hardware, Internet, Auto CAD, MS Office etc.)

To build a career in an organization with opportunities to handle challenging & exciting task.

quality control engr. 3yrs. experience. in finolex ind. ltd. ratnagiri.,MH. INDIA.

Possess two years of experience in software testing of products and applications for web based and client/server applications.

Several years experience in the electrical and electronic field. Experienced in installing, troubleshooting and repairing electrical and electronic units. Maintained and serviced Telecommunication systems and Data communication equipment.

Territory Sales Manager, Marketing Manager & Regional Manager

Senior GIS/CAD Technician with over 2 years experience with Environmental Consulting. Trained in the use of ArcGIS, Autodesk, ENVI, and Microsoft Office. Previous work involved: mitigation, delineation, watershed analysis, habitat conservation, hydrologic monitoring, and soil sampling.

QC Mechanical, API 570, API 653, CWI & NACE coatings inspector

Quality engineer

Im looking for job which would enhance my stong educational background. I am competent enough in various computer programming languages and software. I have experience working in the field such as treatment of waste water. I have a strong grasp in written and spoken English and Filipino.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 [ 27 ] 28 29 30 31

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out