Resume - Assistant Product Engineer " Wafer Probing ang responsible for Yield improvement...

Misco Jobs

Resume #69493

CONTACT INFORMATION:
View contact information...

Objective:
To acquire a challenging position in an organization that will utilize my skills and experience to benefit mutual growth and success and significantly contribute to product development, increase in productivity and better market position

Educational Background:
College:
Bachelor of Science in Electronics and Communication Engineer
Lyceum of the Philippines [ Intramuros, Manila ] Graduated: April 1997
Secondary:
Bataan National School of Arts and Trades Graduated: March 1990
Balanga City, Bataan

Related Experience:
King Yuan ELECTRONICS CO., LTD (K.Y.E.C.) (Chu-nan, Miao-Li 350, Taiwan, R.O.C.)
Semiconductors Company (IC Wafer Probing and IC Package Testing)
Product Engineer (October 5, 2005 - present)
Provide engineering verification and analysis of lots that have data abnormalities (ex: low yield, scrap and other data issue) at wafer sorting
Assisted Product Owner on performing tester and load board correlation / qualification prior to release for production for a certain device
Assisted Product Owner and Customer on Engineering Failure analysis (EFA).
Provides product failures data to customer for their engineering evaluation and analysis through debug tools essential in performing device analysis
Attend to immediate product and system related issue and demonstrate open communication policies with production and maintenance people
Maintain seamless flow of engineering activities through real time yield disposition using device auto-go-flow.
Lead Product Engineer Team in online and offline product disposition and Train new incoming Engineers.
Support Silicon Storage Technology (SST) Product owner and customer in qualifying of Probe Card and Tester.
Skills:
Knowledge in the following prober machines:
TEL P-8, TSK UF200 Series, UF 200A/AL and UF3000
Knowledge in the following Test System Platforms:
Agilent and HP Versatest series (V3300, V1200, V2100 and V1000)(Mixed memory and Logic IC Test System), Maverick II (Nextest system corporation), Credence Kalos tester and Kalosxw tester and Advantest test system.
Uniden Philippines Laguna Inc.(UPLI) (Science Park 1 Cabuyao Laguna)
Electronic Manufacturing Firm (Cordless Tel. Spread Spectrum, Radio Scanner and
Two way Radio)
Production Technician (June 17, 1997 – July 17, 1999)
Supervised the operation of SMT and Auto-Insert machines for product quality and higher output efficiency.
Maintained and trouble shoot all SMT and Auto-Insert machines
Act as assistant Head Technician and Trained all new incoming Production
Technician for SMT and Auto-Insert machines
Create Programs for all SMT and Auto-Insert machines.
Skills:
Knowledge and the following machines
Yamaha Machine (YVL-88 II), Fuji CP642 and 643-E, National Panasonic (JVK-II)
Knowledge and Machine Programming
MCS-30 Programming, PLDT Programming
Other Experience:
G. N. Solution Inc. (Dayap St. Brgy. Palanan Makati City)
Telecommunication and Electrical Contracting Firm (Cable Layout )
Telephone Installer/Electrician (December 2002- )
Structure Cabling for Data (Computer Network) and Voice (Telephone Network).
Cable termination and Layout of door access.
Le Monde Communication Network Inc. (Makati City)
Business Partner of Liberty Telecommunication (Phone Installation and Distribution)
Telephone Installer and Technician (Sept. 16, 2001 – Sept. 24, 2002)
Installation, Trouble shooting of Telephone and Telephone Cable Layout in
Bataan and Zambales area, Survey for new Area for Telephone distribution.
GVC Corporation (Taoyuan, Taiwan R.O.C)
Electronic Manufacturing Firm (GSM and Computer Modem and Motherboard)
Material Controller (Warehouse)(Jan. 9, 2000 – Dec. 29, 2000)
Maintain all the Components used in SMT production line
Prepare all materials for yearly inventory.
Other Skills:
Electronic and Electrical Trouble shooting, PCB Designing and Warehouse Inventory
Seminars and Trainings:
Operation of Versa test, Nextest and Kalos Tester.
Operation of TSK UF200, Tel P-8 and UF3000 Probers.
King Yuan Electronics Production Area October 2004
Telephone Installation and Repair (Liberty Telecommunication)
Customer Technical Service Department December 2001
Yamaha Machine (YVL-88 II) Basic operation, Maintenance and Programming (UPLI)
Uniden Production Area July 1998
Fire Fighting and Chemical Spill control techniques (UPLI)
Uniden Conference room and Field March 1998
ISO 14001 EMS Seminar (UPLI)
Uniden Conference room January 1998
Chemical Handling and Safety Seminar (UPLI)
Uniden Conference room November 1997
ISO 9002 Seminar (UPLI)
Uniden Conference room October 1997
National Panasonic (JVK-II) Operation, Maintenance and PLDT Programming (UPLI)
Uniden Production Area August 1997
Fuji CP642 Operation Maintenance and MCS-30 Programming (UPLI)
Uniden Production Area June 1997
Programmable Logic Control (PLC) and Robotics (Festo Didactics)
Festo Didactics Training Center September 1996
Industrial Automation Handling Pneumatics System (BOSCH)
Lyceum Audio Visual room December 1995

Organization:
Institute of Electronics Communication Engineers of the Philippines (Member)

Personal Data:
Date of Birth: May 17, 1973
Citizenship: Filipino
Gender: Male

Reference:
Available Upon Request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 301 to 350 of 1622)

Go to Search Parameters...

Brief Description

Sr. Geotechnical Engr, Design and Construction of Underground Structures, Mgmt of Multidisciplinary Projects, Numerical Modeling, Rock Mechanics, Ground Support Design, Tunnel Inspections, Hands-on Experience in Applying FLAC, FLAC3d, UDEC and 3DEC Codes in Design, Work Under NQA-1 Q A Program

I am currently a graduate student at the Univ. of Illinois at Urbana-Champaign in the Env. Engineering Dept. I seek a job that will give me the opportunity to explore the field of env. engineering. One in which I can be active both physically and mentally and that challenges me.

Three year working experince in field of hydrogeology and hydrochemistry.

I am a Chemical Engineer with Seven years of experience. My experience can be divided in to two main categories; industrial and consulting, on air and wastewater, treatment, operation and maintenance encompassing permit applications, work plans for regulatory compliance in the areas of Environment,

Hydraulic Design, Troubleshoot, Repair and Manufacture

Petroleum and Natural Gas Engineering, BSc Earth science, MS Candidate

Experience in pollution assessment, emission inventories / monitoring, characterisation of sources, exposure assessment, source testing, data collection & interpretation, emission estimates, regulatory analysis, engineering calculation, presentation and technical report writing.

ME (Environmetal Engineering), 4+ years in desing of waste water treatment units, design of under ground drainage network systems to cities.

Dynamic Assistant Professor of Environmental Engineering broadly experienced in contaminant transport modelling and pollution control in surface and groundwater. Physico-chemical, biological and electrochemical design of environmental control processes, hazardous waste management and treatment.

Iam a postgraduate in Environment Management worked with various petrochemicals, chemical, pharmaceutical, bulk drugs and Oil & Gas E&P industry for the past 8 years in various countries. My experience has been as an Environment Engineer; Environmental Specialist; QHSE Engineer and EMS staff in

Assistant Product Engineer " Wafer Probing ang responsible for Yield improvement "

Desktop technician

Diploma in Mechanical Engineering. (Good in Auto CAD Draughting and Designing)

Senior Weld Mgr / Engineer. I have for decades specialized in providing management support for the implementation of Best Weld Practices and the establishment of Weld Process Controls. I

I have 15 years of working experience with over 5 years in senior management positions with international companies in Asia.

Chillers Process Systems, Compressor Screw & Reciprocating & Centrifugal,Motor Starter,Cascade Refrigeration, Gas Compression,Ammonia Plants,Control Panel, PLC's, VFD's

PhD in enironment engineering

A talented land Surveyor who is able to deliver services in Cartography, photogrammetry, cadastral, mining and Geomatics work.

Technological Assessment and Management -environmental studies, transportation and energy production

Environmental Engineer with more than 7 years professional experience in water projects. Right now, she is acquiring her Masters Degree in Environmental Engineering Science, UNSW, Australia.

I have a BS in Chemical Engineering from Colorado State University. I am a recent graduate from the Environmental Science and Engineering department at Colorado School of Mines, where I completed graduate Master’s research and thesis work specializing in groundwater remediation.

A Graduate in Master of Technology (M.Tech) in Environmental Engineering and Management. having 8 years of experience in the areas of Environmental, Health and Safety Projects Management.

ITI fitter I have 6 years experience in mechanic field also i know lathe ,milling machine operations

Piping Designer PDS CAD

Dynamic, highly adaptive professional offering 20+ years’ experience.

Technical /Project Engineer

I have experience in control systems design, Motor control center design, Variable speed drives, PLC and SCADA programming, power distribution network design. C/C++ and MATLAB programming skills

Proficient in Microsoft Word and Microsoft Excel, Knowledge in Time and Motion Study and Quality Control, Good in communication and writing skills

Experiennced Environmental Scientist

OBJECTIVE A challenging position which provides opportunity to improve my skills as a Senior Process Engineer.

Machine and computer expert

Am adepoju Ademiposi gabriel by name just finished my NYSC,during my youth service i was a site supervisor of construction of Drainage,installation Motorized of Bole-hole in my plce of Primary assingment.

attached for Safety Officer designation

HSE Engineer-a good educated, skilled and experienced individual on construction, fire protection and safety operations aspects, attained from exposure in different industry, hard working individually and in team, friendly and outgoing, self-motivated and well- organized

I am diciplinarian, and had strong in interpersonal and comunication skill with experience in leading the group of fishermen to continous their bussiness improvement. I liked to work with the well planning and target oriented. I had a good knowledge of different social culture of indonesia.

Safety Engineer

Experienced with water/wastewater treatment technologies, Experience in designing reterofitting structures for highway bridges, Good knowledge of urban storm water hydrology and GIS software.

I would like to take this opportunity to present my employment credentials for your consideration, and I would welcome the opportunity to introduce myself to you at your earliest convenience

COMPUTER GEOLOGIST Databases, GIS & 3D Modelling Project & Quality Management

CFD (Computational Fluid Dynamics), Multiphase/Multi-component flows, Fluid Flows, FSI (Fluid Structure Interaction), ASI (Arbitrary Sliding Interfaces), Heat Transfer, Thermal engineering, Design/development, Combustion, Chemical/Reaction Kinetics and Chemical simulation, PhD, Mechanial Engineering

Looking for a challenging position in the field of Civil Engineering, Construction Utilities.

Total 7 years of industrial experience in the large manufacturing set-up/project, in the field of Environmental Management and Resource Conservation and Infrastructure Development projects planning, operation and monitoring.

Strong Academic and Labratory Skills in Geology. Management experience, 13+ years of work experience, Quick to learn, can work solo or in a group, ready and willing to learn anything new.

Sr. Field Engineer, 20+ years, excellent customer service skills, electro-mechanical repair, maintenance

Safety Trainer seeking entry level position with Safety minded company.

BE CIVIL, SPECILIZATION IN ENVIRONMENTAL, MDBA

Experienced Civil / Structural Engineer

Design, collaborative Industrial design, product development, rapid prototyping, surfacing, drafting, Pro/E, Solidworks, plastics, sheet metal, die cast, machining, weldments, tooling, GD&T, analysis, concepting, presentation, project management tools, materials sourcing, costing, vendor interface

I have completed my graduation in Computer Science. Have worked with Bell Canada as a Tech support Customer Representative. Right now working in a telecommunication Industry for Sony Ericsson as Software engineer.

29 years of Intergraph/Microstation, 9 years of AutoCad, 8 years of civil roadway design ,5 years InRoads, 4 years GeoPak, 3 years PDS/Frameworks, 2 years Bentley Structural TriForma

1 2 3 4 5 6 [ 7 ] 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out