Resume - hands on experience in hardware and software design, circuit and PCB design, mic...

Misco Jobs

Resume #70916

CONTACT INFORMATION:
View contact information...

EXPERIENCES AND ACHIEVEMENTS
Electronics Engineer (Full Time)
ThermoFisher Scientific – July 2007 till Present
* To design and develop electronics circuitry and firmware for water analysis instruments
-Design various meter with TI MSP430 for determine the level of impurities in water supplies for domestic consumption as well as industrial use
-Wireless Conductivity Meter, Low Cost Conductivity Meter
* To source all the required electronics components and development tools
-Source for suitable components for various designs such as low power consumption, high SNR, EMC protection, RoHS, SMD
* To ensure that new products meet specifications and customer satisfaction
-Work closely with engineering, standard and marketing department to meet all requirements and exceed customer satisfaction
* To ensure smooth product transfer to production
-Make sure all design specification, schematic drawing, PCBA and others are well documented
* To design for EMI/EMC and safety compliance
-Make sure the product pass the CE testing, EMC EN 61326 specifications

Electronics Engineer (Full Time)
Intellect TDR Technologies Pte Ltd – October 2004 till July 2007
* Research and development on M2M (machine-to-machine) projects / products i.Developed AMR (Automated Meter Reading) system for remote monitoring and logging of electricity consumption and faults.
–Design firmware for TC65 to communicate with Digital Three Phase Kilowatt Hour Meter via serial port (RS232) for data collection and meter configuration.
–Monitor, alert and log file management are implemented to send back to server via GSM or GPRS using AT commands.
ii.Developed RFM (Remote Facility Management) system for monitoring and managing of facilities inside a building / room.
–Design RTU (Remote Monitoring Unit) with Microchip PIC micro-controller and TC45 to monitor status from all kind of sensors and faults reporting via SMS using AT commands.
–RTU is designed with expandable analog and digital I/O ports, sensors with analog or digital output such as current transducer, relay output, motion iii.Co-developed WiFAMS (Wireless Fault Alert Monitoring System) for controlling and monitoring of street lighting remotely.
–Design RTU (MCU) with relay outputs, analog inputs, digital inputs and battery circuit.
–Street lights are turned ON/OFF by relays via SMS commands, current transducers are connected to analog inputs to monitor current readings and battery is as backup power supply for RTU.

EDUCATION
National University of Singapore
Master of Science in Electrical Engineering – January 2008 till present

University of New South Wales, Australia
Bachelor of Electrical & Electronics Engineering – July 2002 till July 2004
* Achievement: Second Upper Honor Degree
* Research Project: Impulse Testing for Low Voltage Equipment
– To investigate the effect of various type of insulation cables through impulse testing and analyze the effect parameters.

Ngee Ann Polytechnic, Singapore
Diploma in Electronic & Computer Engineering – July 1999 till July 2002
* Achievement: Diploma with Merit
* Research Project: Micro-mouse Robot Design
– To build an artificial intelligence robot to solve an unknown maze within shortest possible time and route.

TECHNICAL SKILLS & KNOWLEDGE
* Hands-on experience in hardware and software design.
* Firmware design and development.
–Programming C language and Assembly language.
–Object Oriented Programming: C# and Java.
* Experienced in micro-controller (MCU) based circuit design
–Design sensor-based instruments with Texas Instruments MSP430 Ultra-Low Power Microcontrollers using JTAG emulation tools
–Design embedded systems, RTU (remote monitoring unit) with Microchip PIC micro-controllers: PIC16 and PIC18 series.
–Experience with Philips NXP LPC 2300 series ARM7 core
–Experience with Siemens TC45 and TC65, Microchip PICDEM 2 Plus development board and in-circuit debugger.
–Experience in integration of device I/O such as UARTS, sensors, GSM modems, A/D converters.
* Experienced in digital & analog circuits design
–Digital: RS232 interface circuit, micro-controller circuit, digital controls circuit, timer circuit, multiplexer circuit, data acquisition circuit etc.
–Analog: snubber circuit, regulator circuit, AC to DC converter circuit, op-amp circuit, sensors circuit etc.
* Experienced in various embedded development tools, such as MPLAB IDE, HI-TIDE, IAR Embedded Workbench, IAR PowerPac, µVision IDE, Eclipse.
* Schematic drawing, PCB layout and Routing (Protel99SE, Mentor Graphics Pads), soldering skills.
* Experienced in communication protocols: RS232 serial interface, AT command (GSM and GPRS).
* Experienced with electronic test equipments such as multimeter, oscilloscope, function generator.
* Analytical and problem-solving skills, project management skills.

AWARDS
* Director's List 2002
* Singapore Robotics Games 2002 (Second Runner-up in Micro-mouse Competition - Open Category)
* ECE Academic Staff Prize (For Outstanding Performance in Practical Work)
* Silver Certificate of Achievement in CCA

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1101 to 1150 of 1506)

Go to Search Parameters...

Brief Description

A dynamic accomplished Information Technology Professional with unique combination of experience in Networking and Hardware. Strong Analytical, Organizational and problem solving skills. Ability to identify Operational Deficiencies, skilled in applying Technology and Administration practices to impr

Mechanical engineering finite element analysis composites ansys Master's

PLANNER SMELTER

Mud engineer/ mechanical engineer/ hse advisor/ compliance and standard/ maintenance supervisor/ general inspector and supervisor

AutoCad Mechanical Desktop AutoCad Inventor 3D Modeler

PDMS-11.6, PDS-7.1, Autocad-2006, CAEPIPE 5.11, Pro-E Wildfire2.0

Handled operations Batch Chemical Processes, Fermentation, Distillation, Extraction, Evaporation, Plant Utility Section, Pumps & Compresors, Safety of 3M's and Housekeeping, Maintenance & Overhaul of Operations, Troubleshooting, Startup & Shutdown of the operations in the cGMP environment etc.

analyst

Bachelor of Engineering (Electronics & Communication) ,A.I.V.,A.M.I.E.

7.5 Technical experience, guidance and command in all analytical and environmental based activities, services, management and techniques.

Degreed Electrical Engineer with Pro/E Wildfire 2.0 and Pro/Cabling training

Analytical: Good use of both traditional `wet’ chemistry and modern instrumentation techniques such as HPLC, GC, FTIR, ICP, MS etc. Broad knowledge of oilfield chemicals and their chemistries, mode of action, active constituents and formulations. Good understanding of statistical quality control

I did both undergrad and master's in mechanical engineering with broad range of experiance both in mechanical engineering along with IT

AUTOCAD, HYSYS (PROCESS SIMULATION AND MODELING), H.S.E COMPETENCE PROFICIENCY (SPDC AND NISP), BACHELORS DEGREE IN CHEMICAL ENGINEERING- SECOND CLASS UPPER DIVISION.

10 Years Working As A Cartographer For QARUN Petroleum Company

Working experience - 16 years & 3 months. Highly skilled, experienced, expertise and knowledge as a driller

A fully qualified GIS specialist with experience in the delivery of major asset management projects. Adaptable to business requirements, with management experience. Well versed in the use of ESRI ArcGIS 9.1, WINGS 2.4.10, AutoCAD 2008, Corel Paint Shop Pro XI. IT literate.

E-Business,E-Tendering,International Business Development

FELONY conviction disclosure! Experienced metrologist, industrial electronics repair, computer/network systems analyst looking to reenter tech industry.

Strong knowledge in electronics industries PCB design, assembling, trouble shooting

Bachelor’s Degree in Mining Engineering, Faculty: Petroleum Geology and Geophysics, and Chicago Oakton Community College Faculty: Computer Science.

Experience in Project management w.r.t Electrical, Electronics, IT and Telecommunications, Mechanical equipments, Oil & Gas, and Civil construction equipments, Automotive Industries, Civil Constructions, Project Management, IT / BPO Services, Food and chemical Industries and service sectors

Professional mechanical/industrial engineer seeking a project engineering managmenet or consulting position. Offer extensive engineering and management skills in the industry.

Master of Science in Mechanical Engineering Zone and Energy Manager, Facilities Maintenance Manager

Principal & Project Engineer experienced working Oil & Gas and Industrial electrical projects.

Hard working and Dependable Environmental Professional

Eletro/Mechanical Technician, Applications Engineer

Pro Engineer 2+ years experience

Graduate Chemical Engineer - Looking for an Internship/Co-op/Full time position in the field of chemical engineering.

I have an ability to grasp new concepts quickly and clearly to apply my knowledge and experience for tackling tricky situations.

Visual C++, C#, Visual Basic, Java, J#, Pascal, PROLOG Tools:1.Professional: Microsoft Visual Studio.Net, C builder, Java Visual Age, SQL Server 2000 2.User level: Microsoft Office, Visual Studio, Web Studio, Oracle 9i, Scripting and markup languages: HTML, XML, XSL, VBScript

I WAS DONE B=TECH IN MECHANICAL ENGG WITH 72% MARKS & ALSO DONE DIPLOMA IN MECHANICA;L ENGG & I HAVE ALSO THREE YEAR WORK EXPERIENCE

1 year Wellsite Geologist/Mudlogger; 7 months experienced Varian Gas Chromatography; 2.5 years experienced Staff & Project Hydrogeologist and Environmental Field Technician

hands on experience in hardware and software design, circuit and PCB design, microcontroller circuit and firmware design

Post Graduate with over six years of experience as Geologist with various organizations

A highly motivated and well qualified Chemical and Process Engineer with high experience in Mineral Inspection, Mineral Sample Preparations Mineral Processing and Mineral Auditing Films, Analytical Laboratories and in Processing Industries ready to work under pressure in either a group or independen

Logistics, Technology, Transport and Management Professional

Speak arabic as native and english language (fluent) capeable of using micosoft office ,xl,power point.

Supervising, Inspection, Installation, Maintenance, Computer application and coating specialist

Initially degree qualified as an Electrical/Electronic Engineer, I have been working in the field of DCS Control systems for the past 25 years. I have worked as a Field Service Engineer, Application Engineer, Systems Engineer, Commissioning Engineer. Primarily with Foxboro systems.

Worked for Mckenzie Forest Products for 25 years 12 years as a Supervisor

I am electrical diploma holder,having ten years experience in variety of field like textile company,power plant and research centre.I desire to settle in Australia for betterment

Extensive working experience in Chemical Processing, Power Generation and Oil & Gas Industries. Versatile team player with an ability to incorporate new concepts and interact with all levels of professionals. Expertise in Project, Maintenance, Materials Management and ERP (SAP, MAXIMO, Primavera R3)

Environmental Consultant (Engineer/Scientist)/Geoscientist

Bachelor Engineering of Mineral Resources

Microsoft Certified Systems Engineer with over 12 years experience in system and security administration and management.

I have experiance in sulphoric and sulphonation factories

IT professional with over 20 years of experience. He holds certifications from a international security standard - CISSP and is awaiting confirmation of his CBCP, MBCI and CCM (Business Continuity)

Results-driven Industrial Maintenance Planner/Scheduler offering 15+ years of extensive hands-on industrial maintenance experience, committed to efficiently manage and plan machine maintenance.

A Production & Purchasing Manager with a wide range of experience in Engineering and Manufacturing industry. Able to work on own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 [ 23 ] 24 25 26 27 28 29 30 31

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out