Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #73049 next resume »»
CONTACT INFORMATION:
View contact information...

APPLICATION FOR THE POST: "Field Operator / Production Chemist"
"Marine Cargo Surveyor"
I am working in petroleum field since 1985 and I have got 18 years actual working experience in different petroleum industries in different areas like Quality Control, Field Operations, Production and Administrations. The details are given in the bio data, which is enclosed for your perusal.

Progressive experience in petrochemicals, refinery & lubricating plants as a "Technician " for both Quality Control & Plant Operations hence wishing to use this practical & theoretical knowledge wherever needed in above said areas in any petroleum industries.

Being Science Graduate (Bsc.-Chemistry) from Bombay University, Successfully completed 3 years accreditation course in "Laboratory Technology "at Bharat Petroleum Corp. Ltd, in their 12 MMTPA, a grassroots refinery at Mumbai.
I am thoroughly acquainted & fully conversant with almost all crude & petroleum products tests as per ASTM/IP/BS/API/SMS approved test methods.

I can set up, run, maintain & standardize an independent laboratory for Crude & Pet.Products as per ISO-9002 with all lab equipments standardization & calibration.

Performed Crude Oil loading & Analysis witnessing operations at Dubai /Fujairah/Jebel Ali offshore Fateh oil field,Alshaheen Qatar offshore ( Maersk Oil ).

Complete Analysis of Lubricating Oil, Base Oils, Mineral Oils, their Additives & all kinds of Greases like Wheel bearing/Chassies/Complex/Graphite/Moly Greases.

Complete Analysis of other Industrial Speciality Oils like Hydraulic/Turbine oils, Circulating Oil antiwear/antirust type, Compressor oils, Industrial Gear Oils, Gas Analysis of Propane, Butane, Natural gas, and Refinery Flue Gas analysis (H2, methane, ethane, CO & CO2) using Gas Chromatography, Ammonia, H2S, Acid & caustic samples.

At present I am working with Intertek Caleb Brett, Abu Dhabi, UAE since April 2008 as a Senior Petroleum Inspector (Chemist-Surveyor).

1) Post Applied for: "Field Operator / Production Chemist / Surveyor "
3) Date of Birth: 19th July 1967
6) Marital Status: Married, 2 Childrens ( 15,7 )
7) Nationality: Indian
8) Educational Qualification:

Exam Year of passing University/Board Main Subjects Marks %
Bsc.-Chemistry Dec.1988 BOMBAY Chemistry, Drugs, Dyes First Class
Diploma. in Lab Tech October 1988 NCTVT Trade Theory, Work shop, Science & Calculations, Engineering Drawings 78.92
HSC March1985 PUNE Physics, Chemistry, Maths(Technical) 54.17
(SSC Technical) March 1983 PUNE Physics, Chemistry, Maths(Technical) 70.86
Primary Education 1977-1982 BOMBAY Physics, Chemistry, Maths 54.17

Work Experience:

No. Period Organization Designation
1 Sept. 1985 to Sept. 1988 Bharath Petroleum Corp. Ltd. Bombay Lab Technician
2 Oct. 1988 to July 1990 Modern Oil Industries, Bombay Chemist cum Supervisor
3 July 1990 to April 1991 Unique Oils India Ltd, Bombay Junior Chemist
4 April 1991 to March 1997 Nandan Petrochem Ltd, Bombay Lab In-charge
5 March 1997 to Dec. 1977 Intertek-Caleb Brett, UAE (Sharjah) Lab Technician
6 Dec. 1997 to Sept. 2006 Intertek- Caleb Brett, Kuwait Sr. Petroleum Inspector
7 Sept 2006 to April 2007 Saybolt Dubai, UAE Sr. Petroleum Inspector
8 April 2007 to April 2008 Intertek-Caleb Brett, Qatar Senior Petroleum Surveyor
9 April 2008 to Present Intertek-Caleb Brett, Ruwaise, UAE Senior Petroleum Surveyor

Contact No: 0097150 7210599 (Mobile, UAE) 009712 8772217 (Office)
009122 27716488 (Res. India) 00919821207906 (Mobile, India)
E-Mail: anilsawant2004@hotmail.com

* Highest Educational Attainments: Bsc with Diploma in "Laboratory Technology"
* Languages Known: Good in English (Speak/read/write), Arabic (Speak)
* Driving License: Holding Qatar & Kuwait Driving Licenses.
* Present Salary: 2,200 $ per Month +Accommodation + 4/1 On/off with ticket & Salary.

SUMMARY OF EXPERIENCE:

Working in petroleum field since 1988 & have got 18 years actual progressive working experience in diff. petroleum Industries in diff. areas like, Quality Control, Operations, Sales, Purchase & Office Administrations including last 11 years in Independent Inspections Industries & Marine cargo survey as a " Petroleum Surveyor ( Chemist Inspector )" at Kuwait, Dubai,UAE & Qatar.
I have successfully completed 3 years accredation course as a " Laboratory Technician " at Bharat Petroleum Cop. Ltd in their 12 MMTPA, grass root refinery at Mumbai from 1985 – 1988.

Nine years worked with Intertek-Caleb Brett Kuwait, Middle East since March 1997. Joined as Lab Technician at Sharjah UAE & then successfully promoted as "Petroleum Inspector (Chemist Surveyor)" at Kuwait Operation & Qatar Branch.

At present working with Intertek-Caleb Brett, Ruwaise/Abu Dhabhi, Middle East since April 2008 as a "Senior Petroleum Inspector"

STRENGTHS:

* Familiar with almost all petroleum products testing method as per ASTM/IP/BS/API/SMS standard Test methods.
* Handles modern sophisticated instruments like GLC, GC, AAS, UV/IR Spectrophotometers, Potentiometers, Auto Titrators, Metrohm's Titrino & Colorimeters, Auto Karl-fischers Analyzers, JFTOT & WSIM Analyzer, and Research & Motor Octane Engines.
*Can setup run & standardize an Independent Laboratory for Crude & petroleum product as per ISO-9002 quality system.
*Fully acquainted with ISO-9002 Quality assurance system to conduct internal/external audits
* Completed all mandatory courses for Offshore Platforms, Rigs & Merchant Navy under STCW-95 from D.G. Shipping approved Marine Academies.
* Accredited as a "Surveyor / Petroleum Chemist-Inspector" for Caleb Brett group of Companies from Energy Institute & International Federation of Inspection Agencies.UK (IFIA).

OTHER SKILLS:

* Besides Quality Control Chemist as a profession, overall experience covers other areas as well, such as Field operations, production; sales purchase Administrations & Research-Development.
* Prepare reagents, standard & bench chemicals used in the lab & also responsible in making purchase requisition of lab supplies & chemical reagents
*Operate automated analytical instruments for both qualitative & quantitative analysis. Responsible for its proper maintenance & calibrations whenever needed.
* Good knowledge in handling fire fighting equipments & handling Computers.
* Licensed Driver, fully conversant with MS Office & E-mail / Internet applications.
* Neatness, Accuracy Thoroughness & General Professionalism in presentation of works.

April 2008 – Present ITS Caleb Brett, Ruwaise as: "Senior Petroleum Surveyor"

Loading & discharging of Crude at Jebel Dhana, Products, LPG, dry cargo & chemicals at ADNOC Terminal & Refinery, Bunkering & On-Off Hire Bunker survey.Export survey for quality & quantity & Export costody samples analysis witnessing at ADNOC at Ruwaise Refinery lab & GASCO.Calculations of quantity on board/loaded on vessel & delivered from terminals. Attending Dry cargo loading like Sulphur & Urea at Fetil Terminal.

April 2007 – April 2008 ITS Caleb Brett, Qatar as: "Senior Petroleum Surveyor"

Attended loading & discharging of Crude, Products, LPG, dry cargo & chemicals at Mesaieed, Ras Laffans ports, Al Shaheen offshore, Qatar anchorage, Bunkering & STS transfer of vessels.* On-Off Hire Bunker survey * Attended crude export survey for quality & quantity at Halul Island & at Al Rayyan Anadarco offshore terminals.* Calculations of quantity on board/loaded on vessel & delivered from terminals.

Sep 2006 – April 2007 Saybolt Dubai, UAE as: " Senior Petroleum Surveyor "

Attend full Independent Marine survey at Fujairah offshore, anchorage station, Jebel Ali port, Hamariyah port. Port Rashid & Khalige port. Bukering & STS transfer of vessels prior to load, transfer & discharge. * On-Off Hire Bunker survey * Analysis witnessing at terminals & refinery laboratories as per client's request. * Calculations of quantity on board/loaded on vessel & delivered from shore.

Dec. 1997 - Sept. 2006 ITS Caleb Brett, Kuwait. as: "Petroleum Inspector"
(Chemist Surveyor)
Attend Independent Marine survey, Quality/Quantity inspection of vessels prior to load, transfer & discharge. * On-Off Hire Bunker survey * Inspections of LPG Shipments. * Analysis witnessing at terminal & refinery laboratories as per client's request. * Analysis of all kind of petroleum products. * Calculations of quantity on board/loaded on vessel & delivered from shore & thus investigate loss, discrepancies, demurrages, dead freight followed by issuance of protest to vessel/Terminal on behalf of receiver/supplier. * Run & maintained Caleb Brett Kuwait laboratory for full crude oil analysis as per ISO-9002 with due standardization & Calibrations of all instruments.
Handling instruments like Centrifuse Machine, Hot Air Ovens,Karl Fisher moisture meter,water by distillation,Analytical balance,Salt in Crude Analyzer,Sediment in crude by Membrane & Thimble extraction methods,Digital density meter,Sulphur Analyzer,H2S/RSH meter.

Mar.1997 - Dec.1997, ITS - Caleb Brett, Sharjah: "Laboratory Technician"

* Analysis of all petroleum product, crude gas & chemicals as per ASTM/BS/API standards.* Attend loading & discharging operations of petroleum products at Jebel Ali port, Dubai for the Terminal/Depot like..Shell Caltex, Dugas, Emirate & Star Energy. * Attend De-Ballasting survey to control oil in ballast water discharge.* LPG (C3 & C4) loading & Analysis witnessing, re-certification at Dugas Terminal, Jebel Ali port, Dubai. * Attend Methanol discharge & MTBE loading operation at Jebel Ali port, Dubai. * Handled Bunker Quality/Quantity survey & claims for discrepancies at Fujairah, UAE.* Attended loading & Analysis witnessing at Offshore Dubai Fateh oilfield & Qatar offshore Alshaheen Terminal.

From April 1991 to March 1997 Nandan Petrochem Ltd: "Lab Incharge"

Responsible for Quality Control, Formulations, looking daily production & other Administrative works related to sale dispatch. Analysis of raw materiel, Base oils Additives & all finished products. Carryout diff. formulations at lab scale Research & Developments. * Also responsible for develop & formulate new Industrial specialty products such as Lead Naphthanate, Rosin Concentrate, Sulpharised Fats, Soluble/Neat/Synthetic Cutting Fluids, Textile Auxiliaries, Rust preventive Oils, Oil//Solvent base De-Watering Fluids, Oil Degreaser & Metal drawing Compounds. Carryout pilot blends & introduce them into the market & then re-improved them as per client's requirements against their feedbacks. * Formulate & supply other lube oils, which are raw materiel for other lubricating manufacturing industries.

From July 1990 to April 1991 Unique Oils India Ltd. as: "Junior Chemist"

Analysis of raw materiel, Base oils, Additives & finished products.
Blending of Automotive engine lubricants, Hydraulic Oils, Greases, Turbine Oils & Industriel Speciality Lubricants.

October1988 to July 1990 Modern Oil Industries as: "Chemist-cum-Supervisor"

LDO //LSHS distillation plants manufacturing Spray Oils, Calibration Oils & White Oils by distillation & refining which are used as a raw materiel in manufacturing Rust preventive oils, Metal working fluids, Textile Auxiliaries, Flushing Oils & other industrial Oils. Responsible for all plant operations, production, Quality Control & Administrations.Tested all products for Flash Point, pour points Kinematic Viscosity @ 40/100 C, Karl Fischer Moisture analyzer& Metrohms Auto Analyzers for Sulphur & TAN/TBN.

From Sept. 1985 to Sept. 1988 Bharat Petroleum Corp Ltd: "Lab Technician"

* Thoroughly acquainted & fully conversant with almost all Refinery petroleum products test as per ASTM / IP / BS / API. Test methods covering Physical, Chemical & Instrumental Analysis. Analysis of Bitumen,Reformate,Naphthas,Kerosenes,Motor Spirits,Gasolines,Fuel Oils,Hexane,Benzene,Toluene,Mineral Turpentine,Gas Oils,High Speed Diesels,Waxy Distillates,LSHS,Water Analysis ( Boiler blow down / Effluent & De-mineralized water ), Gas analysis & Catalyst analysis.
Analysis of all types of oils steams samples from all refineries' unit as per IP/ASTM test methods for the operation specification on round the clock basis.
* Responsible for the preparation & standardization of Analytical reagents and periodically check their concentrations to maitain highest level of accuracy.
* Operated automatic Analytical instruments for both Qualitative & Quantitative analysis.Also responsible for their proper calibrations & maintenance.
Handles all types of sophisticated fully automatic petroleum Testing Instruments like.GLC,GC,AAS,UV/IR,Spectrophotometers,Potentiometers,Auto Tritrators,Metrohm's Titrino& Colorimeters,Auto Karl-fischers,JEFTOT & WSIM Analyzer,Research & Motor Octane Engines.Oil & Grease Analyzer

*************************************************************

View contact information...
«« previous resume next resume »»
Search Results (Resumes 451 to 500 of 1513)Go to Search Parameters...
Brief Description
Expertise in Environmental Monitoring, Compliance and Assessment issues.
• Having two years of experience in engineering consultancy. Have a vision to quickly identify and understand the business benefits of new technologies. • Strong computational, analytical problem solving, and design skills.
I am civil engineer, Msc with 2 years of experience. My topics are hydrology and groundwater modeling. Excelent knowledge in GIS, Excel, Word, Visual Basic, Matlab, Photoshop and Dreamweaver.
Graduate Engineer with 1.5 years professional experience. Degree in Civil Engineering. Masters Degree in Water & Environmental Engineering.
MSc (Mech Eng). Project Mngmt - waste, power, steel. Currently working in China (6 years), have previously worked in Netherlands, England, Canada, Germany. Currently Project Director, responsible for multi-million $ projects. languages fluent Dutch, English, German, good French, basic Chinese
Diploma In Mechancial Engineering+NEBOSH Level-3+Post Diploma In Industrial safety Management+Environment, Health and Safety Management Specialist Certification course from NASP of USA/14 years experience in Oil&Gas as HSE Advisor/Engineer/Officer/coordinator/
Hardware systems engineer (Electrical Engineering, Hardware Design, Hardware/Software Testing, Hardware/Software Troubleshooting)
Experienced Project Management Professional (PMP) looking for a Project Manager position with your professional organization
Mechanical Engineer with five years extensive expereience in the field of maintenance for a process plants and a hard core production plant.
I have done Masters in Environment Sciences. I have 2 years of experience. I am doing Certificate in GIS programm in Hunter College, City University of NEWYORK.
MS Chemical Engineer With R&D Experience
Environmental Engineer, M.S., E.I.T. (Water and Wastewater)
Chemical Engineering graduate with extensive experience in silicate manufacturing, pulp&paper manufacturing and design of wastewater treatment facility components with strong interpersonal skills
Keen interest in positions in the Environment, Sustainable Development and HSE sectors; dynamic and flexible with good problem solving skills, excellent communication and team working skills, achievement oriented with a strong academic record and international experience.
Employment as Water Resources, Environmental Engineer, Land Designer, AutoCAD Designer or ArcGIS Developer
Drilling, completions consultant. Experienced environmental/safety manager/supervisor for the oil/gas industry.
Automation through PLC and SCADA, working as shift in-charge, process in-charge,
Professional training in environmental engineering with exceptional communication and interpersonal skills and a solid background in waste management
RECENT GRADUATE STUDENT (PG.Dip.Sci, geology) Looking for internship or full employment in Hydrogeology/Environmental/investigation/geophyiscs
Seeking a position as an executive with responsibilities for better performance, skills improvement and emphasis on environment for teamwork for company as well as personnel growth.
OBJECTIVE An engineering position with a dynamic organization dedicated to technical excellence with an opportunity to apply and expand my engineering skills EDUCATIONAL QUALIFICATIONS Ø Master of Engineering (Chemical Engineering) Lamar University, Beaumont, TX GPA: 3.8/4.0
engineer working as a Program Officer with USAID. Graduated from Jordan University for Science and Technology /Civil Engineering Department, with a Major in Water Resources and Environmental Engineering.
Recent graduate with BS in geology from UC Davis.
Science Chemistry graduate with total 18 years experience in petroleum field in Quality control & operations. Last 12 years in Gulf countries as Petroleum Inspector- Chemist Surveyor in Marine cargo inspection business.
B TECH PULP & PAPER TECHNOLGY
B.Com (Bachelor Of Commerce), Diploma in Software, Accounting
Environmental Advisor with experience in environmental compliance, monitoring, reporting and rehabilitation. I have fulfilled both technical and advisory roles as an environmental professional in the mining industry of Western Australia and South Australia.
I hold MS degree in Environmental Eng and a BS degree in Civil Eng. I have hands on experience in implementing & leading ISO 14001 EMS, waste management, environmental audits, inspections, monitoring, risk assessments, EIAs, remediation studies, and for the last 6 years working in Oil & Gas industry
Master of Science in Geology and MBA from a leading Australian Business School. Having 25 yrs experience in mining industry in exploration, mining geology, financial analysis, consultancy and feasibilty reports and financial studies
Automation engineer with 7 years of international experience in PLC/HMI
I graduated in Agricultural Engineering and presently doing my Master's project in water resource development and management at T.U: Dresden, Germany with financial assistant from DAAD and being student of IIT-Kharagpur, India expected to complete it by June 2006 having knowledge in computers
Application Manager - Control Valves and Engineered Products
As per the Job requirement posted on web site as a System administrator/Network administrator/Server engineer/Desktop Engineer. I am 100 % suits for this job because past 6 years I was doing the same job. In those 6 years I worked 4 years for the remote locations in Kuwait. I used to travel everyday
Environmental Consultant/ Biologist / Public participation & Consultation
I have completed M. Sc. in Forestry from the Institute of Forestry & Environmental Sciences, Chittagong University, Chittagong, Bangladesh. I have grasp knowledge in statistical data analysis. I have few research articles published in the national and international journals.
With thorough knowledge in design, installation, fabrication and commissioning of desalination plant.
Mtech (Ocean Engg) With 1-Year Experience In Mooring Design And Dynamics
Geologist 4yr exp. environmental and geotechnical
A STRONG ACADEMIC CANDIDATE WITH A MSC ENVIRONMENTAL TECHNOLOGY WITH DISTINCTION. SPECIALISING IN WATER QUALITY AND TECHNOLOGY, WITH 5 MONTHS EXPERIENCE WITH ANGLIAN WATER SERVICES. WISHES TO FIND EMPLOYMENT IN OR CLOSE TO LONDON, UK.
Accomplished professional leveraging strengths in hydrogeology, geology, geomatics and geotechnical engineering to earn a position on a team committed to making genuine social contributions within challenging, multifaceted environments. Possess an MS in Geology and an MS in Hydrology / Hydrogeology;
Safety Engineer, (NEBOSH) Lifting & Rigging Supervisor, (NVQ 3.)
Executive level mechanical engineer with extensive experience in many enginering fields.
Engineering Graduate
Combined experience in Refrigeration and Electrician Technician in the Pharmaceutical Industry, Petrochemistry and Building Management System (BMS).
Registered professional geologist - Wyoming (PG-3477). BS and MS degrees in Geology. Work history includes geotechnical engineer/estimator in the construction industry; mine engineer at a bentonite mine, and the following experience as a geologist:
Power Plant Chemistry, Water Treatment Plant commissioning , Boiler Water Commissioning
computer Literate,
Completed post graduation in Environmental engineering and completed graduation in chemical engineering and having one year experience in chemical bacground.
B.S. Nuclear Engineering (Texas A&M University), Fluent in Spanish, Internship experience, proficient in various engineering computer programs.
chemical engineer with 4 years experience
1   2   3   4   5   6   7   8   9   [ 10 ]   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31  
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com