Resume - Installation, Testing and Comissioning of various SCADA and Telecommunication re...

Misco Jobs

Resume #76861

CONTACT INFORMATION:
View contact information...

SUMMARY of SKILLS:

* Installation, Testing, Commissioning GE's D20M, D20M++ and D2OME RTU's.
* Installation, Testing and Commissioning of GE's DAPserver with V400/D400 platform with Protocols:
1. DNP3 Serial, TCP/IP, and UDP/IP
2. IEC 60870-5-101/103/104
3. Modbus RTU, ASCII and TCP/IP
4. Relay protocols: SPA-Bus, SEL, Courier
* Installation, Testing, Commissioning of multi-vendor Intelligent Electronic Devices.
* Sufficient experienced in substation automation and MBSC (MicroProcessor Based Substation Control).
* Sufficient experienced in various SCADA software and hardware interfacing.
* Installation, Testing, Commissioning, Operate and Maintain Telecom equipments such as:
Microwave/UHF/VHF radio transceivers, Digital/Analog Multiplexers, PABX and Other Terminating Equipments, Power line Carriers, Protection Signaling Equipment, including Antenna and Waveguide installation and other accessories involving Telephone inside and outside Plants, MDF and Interconnection assemblies.
* Adequate knowledge in TCP/IP based equipments.

EDUCATION:

Cisco Systems
CCNA 1 NETWORKING BASICS
CCNA 2 ROUTERS AND ROUTING BASICS
CCNA 3 SWITCHING BASICS AND INTERMEDIATE ROUTING
CCNA 4 WAN TECHNOLOGIES
Centre for International Education
Cebu City, Philippines
January 19, 2007 to May 03, 2008

Bachelor of Science in Electronics and Communication Engineering, BSECE
University Of San Jose Recoletos
Cebu City, Philippines
June, 1987 to March, 1992

WORK EXPERIENCE:

ENGINEER B SCADA/EMS
NATIONAL TRANSMISSION CORPORATION, PHILIPPINES
2003 to Present

1. Responsible for the Instrumentation and Control aspects of the Data Acquisition and Control (DAC) system of the Visayas Regional Control Center/Backup National Control Center (VRCC/BNCC) and Area Control Centers (ACC).

ENGINEER B SCADA/EMS
NATIONAL POWER CORPORATION, PHILIPPINES
2001 to 2003

1. Assists the revisions and updates of the SCADA/EMS database, CRT display definitions and all system software for the Visayas Regional Control Center/Backup National Control Center (VRCC/BNCC) and Area Control Centers (ACC) including all enhancements and upgrading to the system software and real-time database to ensure the reliable and efficient function of the over-all SCADA/EMS system.

2. Assists the implementation of hardware maintenance activities of the computer systems, peripherals, man-machine interfaces, data communication equipment and other computer controlled devices at the Visayas Regional Control Center/Backup National Control Center (BNCC), the various Area Control Centers and the automated substations in the Visayas Grid.

Equipment involved:
* RTU'S: D20M, D20M+, D20M++, D20ME: GE Harris
* IED'S: DMMS 300 series, SHARKS, SATEC, NEXUS SIEMENS AND AREVA
* Converters: RS232/485
* XA21 Systems
* REALFLEX System
* PLC's: Siemens
* MMI's

SR TECHNICIAN TELECOM DIVISION
NATIONAL POWER CORPORATON, PHILIPPINES 1998 to 2001

- Assists the Installation, Testing and Commissioning of electrical and electronic equipment such as Power Line Carriers, Analog/Digital Microwave and UHF Radios, Digital Telephone Equipment, Multiplexers, Digital Cross Connect Systems and Microwave Supervisory Alarms and Control Systems.
- Coordinates with other groups within the division regarding interrelated work activities.

TECHNICIAN D TELECOM DIVISION
NATIONAL POWER CORPORATON, PHILIPPINES 1995 to 1998

- Undertakes preventive/Corrective maintenance of various telecom equipments.
- Performs necessary corrective maintenance and troubleshooting of various Telecom Equipment including Microwave, UHF, Multiplexers, Radio Supervisory Alarms and Controls, PABX and other accessories
- Performs replacements or revisions in the telecommunications network.
- Performs analysis and troubleshooting of equipment or system.
- Performs periodic adjustment and calibration of various telecommunication equipments.
- Prepares and updates wiring lists and schemes for reference

Equipment involved:
* 2Ghz, 7Ghz Quadra link radio, HARRIS
* UHF radio, MDS
* FOX 515, ABB
* Multiplexers, TELCO
* PABX, HARRIS
* POWER LINE CARIERS, SIEMENS
* 48Vdc system, CHLORIDE

SALES ENGINEER,
GRAM INDUSTRIAL, INC. - 1993 to 1995

- Handles most projects in breweries: Automation of bottling station

TRAINING:

FOREIGN TRAINING:
* REF 54X & CAP505 MAINTENANCE, REC 561 & CAP540 Maintenance and MicroSCADA Maintenance & Administration
9/27/2005 to 10/5/2005 CCE, LJUBLJANA, SLOVENIA

* UTILITY COMMUNICATIONS SYSTEMS
Power line Carrier ETL 500 Rel.3
Teleprotection NSD 550
9/17/2001 to 9/21/2001 ABB University SWITZERLAND

LOCAL TRAINING:

* INFORMATION TECHNOLOGY PLANNING AND MANAGEMENT
09/26/2007 by Comfac Global Group

* SOLID WASTE MANAGEMENT TRANING
07/06/2007 Transco In-house Training/Seminar

* STANDARD FIRST AID TRAINING
07/05/2007 Transco In-house Training/Seminar

* LOGICAL UNIT INTERFACE (LUI) DATABASE AND HARDWARE MAINTENANCE TRAINING
02/27/2007 to 03/02/2007 Transco In-house Training/Seminar

* TESTING AND COMMISSIONING OF SIEMENS MICROPROCESSOR
BASED S/S CONTROL (MBSC)
01/16/2007 to 01/19/2007 Transco In-house Training/Seminar

* RELIABLITY CENTERED MAINTENANCE
6/27/2006 to 6/29/2006 TransCo In-house Training/Seminar

* APLIED ANALOG ELECTRONICS
3/27/2006 3/31/2006 30 IECEP-TESDA

* GE FANUC Quick panel and Programmable Logic Controller
3/10/2006 JEDD Technologies Corp.

* TEMPERATURE MONITORING AND LOAD PREDICTION SYSTEM
2/2/2006 to 2/3/2006 J-Power Systems Corporation

* UPS SYSTEM, AC/DC PANELS, & EMERGENCY GENERATING SETS
1/27/2006 to 1/27/2006 Energy Premier & Services, INC.

* Introduction to RDBMS and SQL
8/17/2005 to 8/19/2005 TransCo In-house Training/Seminar

* SAFETY ORIENTATION SEMINAR
7/16/2004 to 7/16/2004 TransCo In-house Training/Seminar

* PLC Siemens S7-200 Series
5/22/2004 to 7/10/2004 CITE (Center fro Industrial Technology And Enterprise)

* REALFLEX INSTALLATION AND MAINTENANCE TRAINING
6/4/2004 to 6/4/2004 TransCo In-house Training/Seminar

* XPAC PRO, PC FOR THE MANAGER AND PC NETWORKS AND TROUBLESHOOTING 7/5/2004 to 7/9/2004 TransCo In-house Training/Seminar

* RTU (GE HARRIS D20) TECHNICAL TRAINING
12/29/2003 to 12/30/2003 TransCo In-house Training/Seminar

* ISO 9001:2000 Internal Quality Auditing
6/18/2003 to 6/18/2003 TransCo In-house Training/Seminar

* ISO 9000: 2000 5S+1 AND EFFECTIVE RECORDS MANAGEMENT SEMINAR
11/22/2002 to 11/22/2002 TransCo In-house Training/Seminar

* SUBSTATION OPERATION/MAINTENANCE
Protective Relaying
11/20/2002 to 11/23/2002 National Power Corporation

* SUBSTATION OPERATION/MAINTENANCE
Power Metering
11/7/2002 to 11/8/2002 National Power Corporation

* SUBSTATION OPERATION/MAINTENANCE
High Voltage Power Equipment
10/22/2002 to 10/24/2002 National Power Corporation

* SCHEMATIC DIAGRAMS AND LOGIC CIRCUITS
8/28/2002 to 8/29/2002 National Power Corporation

* OPTIONS, OPPORTUNITIES AND PERSONAL SUCCESS SEMINAR
7/22/2002 to 7/24/2002 National Power Corporation

* FIBER OPTIC SPLICING AND MAINTENANCE TRAINING
3/19/2001 to 3/20/2001 Hyundai Engineering & Construction Co., LTD.

* MODERN BROADCAST AUDIO PROCESSING
11/8/1998 to 11/8/1998 IECEP-TESDA

* PRINCIPLE OF PCM SYSTEM
11/8/1998 to 11/8/1998 IECEP-TESDA

* DIGITAL TELEPHONE SWITCHING
7/9/1998 to 7/9/1998 IECEP-TESDA

* INTERNET
4/26/1998 to 4/26/1998 IECEP-TESDA

* FIRST AID & BASIC LIFE SUPPORT TRAINING COURSE
5/18/1998 to 5/22/1998 IECEP-TESDA

* POWER LINE CARRIER SYSTEM ESB 2000i DIGITAL TELEPROTECTION
SIGNALLING SYSTEM SWT 2000D
11/17/1997 to 11/17/1997 SIEMENS AG

REFERENCES:
Will be provided

BIRTH DATE: October 13, 1970

LANGUAGE: English

PROFIECENCY LEVEL: Conversational

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 1619)

Go to Search Parameters...

Brief Description

Environmental Manager/Top Wastewater Licenses

PhD environmental engineering/bioremediation, MSc environmental diagnostics, BSc (Hons) Biology

Licensed Professional Engineer registered in British Colombia and Alberta, and able to be registered in other Canadian, U.S. and international jurisdictions.

Mechanical Engineer, Static Equipment, Pressure Vessel, Heat Exchanger, Tank

Geologist/Exploration geologist

5 years as a assistant Analytical Chemical Technician

I have the EIT license and took the PE Exam on April 2009. Familiar with SAP 2000, Staad Pro, Mathcad, AutoCad, and ABAQUS. Academic experience in Civil/Structural Engineering, and professional experience in Environmental Engineering. I am looking to relocate to the Boston Area.

HSE Learning/Development Professional seeking position in an industrial setting.

Fire Safety Engineer

Mechanical Engineer, EIT

6 Years Exp. In LAN, WAN, VPN, VLAN, VOIP, Microsoft Servers, IIS, ISA, Exchange, Lotus Note, Backup

I would like to work in IT department to give the company from what I gain experiance and knowledge

PDS, Micro Station, AutoCAD

CHEMICAL ENGINEER

Degree in Chemical Engineering at the University of Pretoria. I see myself as an enthusiastic and disciplined person who will give his all in his career. I am very eager to learn to I am looking forward the opportunity of learning the inn’s and outs of industry

Installation, Testing and Comissioning of various SCADA and Telecommunication related equipments

Environmental Engineer( solid waste management)

Experience in Collection and processing of Ground Control Points data using Geodetic quality GPS receivers and LGO(Leica Geo Office & TGO (Trimble Geomatics Office)

My Q-HSE management experience spans more than 20 years and includes a broad spectrum from that of worker, public safety officer and emergency responder to educator, consultant and civilian contractor to both construction and general industry clients, including 21 months in Afghanistan.

Graduate Structural E.I.T.

I have 12 years experience as an engineer in mechanical engineering field. I worked last 10 years as a Ship Repair Engineer and Project Engineer. I can undertake full responsibilities and worke idepenerntly in teams. I respect and highly dicipline person.

Health, Safety, Security & Environment Management professional (BE, MBA) from premier Indian Educational Institute, with expertise in audit, compliance, policy and consulting

Ingenieur in the Industrial Chemical

Thermo-Energy Engineer

I am presently a PhD student looking for Industry Coop. and Intership

Senior Construction Manager

Geotechnical engineer with international experience

SPCC,AUTOCAD,GIS,MICROSOFT OFFICE,FRENCH,AIR POLLUTION MONITORING,ORGANIZED,TEAM PLAYER,QUICK LEARNER.

Technical Author, Trainer, Project Manager

Broad experience of oilfield infrastructure, water,sewage treatment , gas turbine stations, oil pipelines, rig sites, industrial building, housing, earthworks, rail & general civil, mechanical & electrical works in UK, Africa & Asia. Project and Site Management in a variety of challenging locations

Engineering/Project Manager skilled in organizational/project management/business development. Highly skilled in client relations/development. Diverse experience in environmental consulting/nuclear power/regulatory compliance/facilities/systems engineering/infrastructure projects.

Metallurgist/Mill Engineer, Grinding/Flotation/Cyanidation/Solvent-Extraction/Electrowinning

Laboratory Techniques, computing skill, creativity, communication skill.....

Telecom Field Engineer :- Having experience in telecom planning, field survey, telecom construction, testing, and maintenance of Telecom field & quality assurance. Installtion & testing of telecom equipment & networks.

AutoCAD MEP 2009; Revit MEP 2008, Civil Survey CAD programs

I am proficient in a lab setting and work very well in a team setting. In me you will find a hard working, cheerful person who takes her work very seriously and is always up for a challenge.

Spainish Citizen

I am a hardware engineer and a hardworking person

Site investigation, Design of Foundation, Design of Embankment and Retaining Structures, Slopes Stability, Numerical Analysis, Constitutive Modelling, Contaminated Land Remediation, Ground Work Supervision, Mining Engineering, Total Station and Precise Level Surveying.

Power electrical engineer from Aleppo university

17 year experience in environmental management as Head - EHS and GM (Env. Tech) in large environment consulting and waste management co

Over five years of experience in Environmental Engineering including environmental evaluations, water quality impact analysis, environmental permits and environmental management.

Diversified: Nuclear Power Clearance /Mechanical/Electrical/Civil/Architectural/GIS Map/Water Design

31 yrs im field. I have ben an Electrical Field Engineer For a long time

Qualified, results-producing Management Professional with experience steering and directing all aspects of operations, administration, budgeting, and equipment maintenance. Successful in managing multiple projects with compelling priorities involving program development.

Broad-based experience covering a full spectrum of health safety and environmental services, including, Environment and Earth Resource management, and experience in administration and consulting. Knowledge of environmental tools: life cycle analysis, environmental impact assessment and HSE

Diesel Generator Mechanic, Knowlegde in Computor Hardware

PIPE DESIGNER, More than twenty-five years experience in Technical drafting, piping and equipment hands on field work in the Chemical Manufacturing environment.

Experience has been gained operating from supervisory, management and design standpoints on a variety of E&IC contracts within the U.K. and overseas.

PhD chemical engineering, 15 years experience as operations and academic teaching

1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out