Resume - HVAC Field Service,BAS,DDC

Misco Jobs

Resume #79925

CONTACT INFORMATION:
View contact information...

HVAC Field Service,
BAS/DDC Controls Technician

Mark Amerson

2820 Prospect Parkway
Durham, North Carolina 27703
(919)408-6184

havcchamp@yahoo.com
Valid U.S. Passport
Active Interim Secret Clearance
Seeking overseas assignment

SPECIFIC WORK/TASK EXPERIENCE

9/07-3/08
Man Tech International
Environmental Controls Technician
Balad Airbase, Iraq
I provided direct HVAC support to the Army at the Regional Support Center in Iraq. My function was to maintain and service the Army's A/C Systems. They are commonly referred to as Environmental Control Units. Repairs made to these systems included troubleshooting the Electronic Motor Controller,new compressor installation and replacing failed electrical switches. Other duties on the AMC Site were to service the Sprung structure 20 ton Commercial Package units which provided 10 KW electric heat. I also served as the back up Power Gen Set technician.

7/06-7/07
Aecom
HVAC/R Specialist
Bagram Airbase, Afghanistan
HVAC Foreman over 8 Third County Nationals and 2 expatriates. As lead mechanic I implemented a refrigerant recovery program. This program involved refrigerant accountability and recovery. I also served as back up Gen Set Tech. As lead Technician I trained all technicians on the new Inverter Heat Pump (410 A refrigerant)units. Plumbing supervisory duties included overseeing Hot Water Tank installs,their electrical,and plumbing circuits. Troubleshooting septic systems,inoperable water pumps,and blocked condensate drain lines were also part of my duties. In this role I received The Afghanistan coin of appreciation from the Base Commander LTC Dixs.

4/05-4/06
KBR
HVAC Mechanic/ Appliance Technician
Bagram Airbase, Afghanistan
Supervisor of Local National workforce (10) assisting in HVAC operations.
The HVAC Department was responsible for all units at Bagram. Units that I had to troubleshoot were WILMS heaters and heat pump systems (2-4 tons). During this time I was called to trouble shoot Dining Facility systems. This would include server line warmers, walk-in refrigerators, freezers, and range hood ventilation systems. As part of the HVAC Department I received a certificate of appreciation.

4/04-4/05
United States Army
52 Charlie Utilities Equipment Repair/HVAC Technician
My function was to maintain and repair the Army's HVAC systems. Duties included operation of the Robin Air recovery/recycle unit. Mechanical repairs performed included the replacement of a failed compressor,evacuation, and subsequent recharge of the A/C system Failed electrical switches that were at fault were isolated and then replaced. I also received training as a 52 Delta Gen Set Technician.

3/03-4/04
40 Realty Associates
HVAC Technician/ Electrician
Primary duties included oil burner maintenance. Maintenance practices were nozzle cleaning, electrode alignment and filter cleaning. Electrical repairs included breaker replacement, ruff-ins,and the light fixture installation. Additionally I would wire 220/120 volt circuits for newly installed A/C Systems. During this time period I also served in the New York National Guard. My Military duties allowed me to troubleshoot and service the Army's HVAC/ECU systems.

8/01-3/03
J and J Electrical
Electrician
Duties included the installation and wiring of disconnect box's that provided power to the HVAC unit. Many of my responsibilities called for me to wire switches,wall receptacles,feeder panels,and replace faulty circuit breakers. Additionally I performed the change of service/upgrade from fuses to breakers in residential homes. During this time period I also served in the Virginia National Guard. My Military duties allowed me to troubleshoot and service the Army's HVAC/ECU systems.

4/01-8/01
U.S. Army Ordnance Tactical Center
Duties included operation of the Robin Air recovery/recycle unit. Mechanical repairs performed included the replacement of a failed compressor,evacuation, and subsequent recharge of the A/C system Failed electrical switches that were at fault were isolated and then replaced. I also received training as a 52 Delta Gen Set Technician.

1/98-2/01
T and B Mechanical
HVAC/Appliance Technician
While employed I serviced residential 5 ton Heat Pumps and 15 ton Commercial packaged units. I also performed Shop work where I would refurbish various types of restaurant equipment. Mechanical and electrical repairs were performed on drink dispensers,water coolers,walk in refrigerators and kitchen/range ventilation systems.

CERTIFICATIONS
American Society of Heating,Refrigeration,A/C Engineers
Thermal Comfort.
ASHRAE/IESNA Lighting Requirements Standard 90.1-2004, 2007.
ASHRAE/IESNA Mechanical Requirements Standard 90.1-2004, 2007.
ASHRAE/IESNA Envelope Requirements Standard 90.1-2004, 2007.

Department of Defense
CFC/HCFC Universal Technician.
Refrigerant Recycle and Recovery.

Heating and Refrigeration Distributors International
Installation Residential HVAC/R systems.
Troubleshooting Residential HVAC/R systems.
Commercial Refrigeration.
Refrigeration Low voltage controls.

Mobile Air Condition Society
EPA Refrigerant Recovery and Recycling CFC-12
EPA Motor Vehicle A/C Technician (ASE)

Contruction Education of New York State
Overview of Construction Documents
Construction Documents
Agreements, Contract Document and Document
Project Delivery Concepts
Conditions of the Contract
Procurement and Project Document Modifications
Procurement and Contracting Requirements
Formats
Drawings and Specifications
Measurements, Payments, Submittals
Quality Requirements
Fundamentals and Methodology
Preparing PART 2 Production & PART 3 Execution
Preparing PART 1 General
General Requirements
Methods of Specifying
Producing a Project Manual
Project Delivery Systems
Coordination of Construction Documents
Changing Construction Documents
Project Environment
Construction Documents
Basics of Product Representation
Product Representation Tools and Techniques
Product Representation During Design
Product Representation During Procurement
Product Representation During Construction
Payment, Modifications, Claims and Project Closeout

Auto Desk
Revit® Architecture Creating and Modifying Schedules

Architectural Engineers Construction
Designing Pathway Spaces Communication/Cables Power Distribution
Introduction residential light control
Lighting Solutions for Healthcare
Light control solutions healthcare applications
Energy Efficient Street Area Lighting
Energy Savings Through Indoor Air Movement
NFPA 13D Installation fire sprinklers in 1 & 2 family home
Appliances & The Green Home
Modular Refrigeration: Functional, Flexible, Custom Design
Principles of Universal Design Housing/Home Appliances
Life-Saving Design: Advanced Egress-Routing Systems
Underfloor Air Distribution Systems
Cool Roofing Solutions to National Energy and Environmental
Elevator Technology
Downdraft Ventilation
Home Elevators

Panasonic Security Training
WV-NW484S i-Pro Network Color Dome Camera
WJ-ND300 Network Video Recorder
WV-ASM100 i-Pro Management Software

Mainstream Engineering
H.V.A.C/ Refrigeration Preventive Maintenance Technician.
HFC- 410 A Handling, Use, and Recovery.
Indoor Air Quality Technician, (IAQ)
A/C Motor Vehicle Technician, (MVAC)

New York State High Performance School Design
Water Management and reuse
Special HVAC Systems, Equipment and Controls.
Maintenance Operations of HVAC and Mechanical Equipment.
Building Commissioning.
Thermal Loads and Comfort.
Renewable Energy Systems.
Ventilation- Natural and Mechanical.
Water Management and Reuse.
HVAC System Design and Selection.
Electric Systems and Lighting.
Lighting Design.
Sources, Luminaries, and Controls.
Lighting Strategies and Tools.

Fire Department of New York City Certificate of Fitness
Liquid Petroleum Gas.
Medical Gases.
Air Compressor Operator..
Cryogenic Refrigeration Store, Handle, and Use.
Low pressure Boiler Operator.

ATS Heavy Equipment Operator School
Level I: Backhoes, Wheel Loaders, and Dump Trucks.
Level II: Bulldozers, and Scrapers.
Level III: Excavators and Motor Graders.

Lighting Controls Association
Dimming Controls and Systems.
Occupancy Sensors.
Load Schedule Control.
Fluorescent Dimming.
Dimming by Design.
Daylight Harvesting by Design.
Lighting and LEED-NC.
Compliance with Controls.
Hi-Bay Lighting Upgrades.

United States Department of Energy Building Codes
Advanced Energy Design Guide: Envelope Overview
Advanced Energy Design Guide: Mechanical Overview
Advanced Energy Design Guide: Lighting.
Advanced Lighting and the Energy Code.
Alterations 90.1 COMcheck.
Mechanical Requirements of the 2006 IECC.
Commercial Lighting Requirements of the 2006 IECC.
Commercial Envelope Requirements of the 2006 IECC.
Exterior Lighting Requirements and COM check.
How to Use COMcheck.
How to Use REScheck.
Log Homes in REScheck.
REScheck for the 2006 IECC.
Residential Requirements of the 2006 IECC.
Vestibules: Understanding the Commercial Energy Code.

American Petroleum Institute
Distributed Control Systems.
Single Loop.
Multiple Loop.
Pneumatic Controls.
l/O Communications.
Programming Controllers.
Systems and Integration.
Smart Controllers.
Human Interface Device.
Field Device Laptop PC configuration.
Field Device Analog configuration.
Field Device Digital DCS configuration.

PDH Engineer Center
Data Communication for Digital Processes.
Integration of Control System Devices.
Computer Networking.
HVAC Controls.
Geothermal Heat Pump Systems
Refrigeration Chiller Systems.
Variable Air Volume Systems.

Instrumentation, Systems,and Automation Society
PLC Programming.
Motor Drives Variable Speed AC.
Process Controls.
Electronic Maintenance.
Boiler Operations.
Air Handlers-Mechanical Systems.
Cooling Towers Trouble shooting and Maintenance.
HVAC/R Chiller Mechanical Components.
Chillers Leak Check/Electrical.
Communications and Advanced Programming.
Input and Outputs.
Logic Fundamentals,Types and Applications.
Mechanical Electrical Lockout Controls.
Mechanical Electrical Electronic Controls.
Mechanical Electrical Control Schematics.
Mechanical Electrical Responsive System Controls.
Mechanical Electrical Energy Management.
Mechanical Electrical Design and Troubleshooting.
Mechanical Electrical Control Systems.

Siemens Energy and Automation
Motor Control Centers.
AC Drives.
DC Drives.
Sensors.
Load Centers.
Surge Protection.
Safety Switches.
Circuit Breakers.
Panel Boards.
Power Monitoring.
Busway.
PLC's.

Contemporary Controls
Industrial Ethernet Technology

Industrial Networking University
Basics of EtherNet/IP
Advanced EtherNet/IP
Basics of DeviceNet
Advanced DeviceNet
MODBUS RTU
Basics of Modbus RTU
MODBUS TCP
Basics of Modbus TCP
BACNET
Basics of BACnet

COLLEGE/TECHNICAL TRAINING

TCI College
H.V.A.C/Refrigeration Technology
2004

H.V.A.C/Refrigeration Technology Diploma
Penn Foster College
2002

H.V.A.C/R Electric Motors
Richmond Technical Center
2001

SIGNIFICANT
HVAC EQUIPMENT:
Army Environmental Control Unit (E.C.U)
6,000 BTU Vertical
9,000 BTU Vertical
18,000 BTU Horizontal
36,000 BTU Horizontal
60,000 BTU FDECU Horizontal
Coolex Package Unit 15 Ton (460 Volts, 3 phase) Military Sprung application
Climatcool Package Unit 15 Ton (460 Volts, 3 phase) Military Sprung application
LG Package Unit 15 Ton (460 Volts, 3 phase) Military Sprung application
York Heat pump package unit 20 ton (460 Volts, 3 phase) Military Sprung
Chigo ¾ and 2 ton Heat Pump 9,000 24,000 (120, 220 Volts 1 phase)
Samsung 1 and 2 ton Inverter Type Heat Pump (220 Volts 1 phase) 410 A refrigerant

I am willing to consider other locations in the U.S.
I am willing to consider other international locations.

Location Preferences:
Africa
Asia
Middle East

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 1596)

Go to Search Parameters...

Brief Description

HVAC Field Service,BAS,DDC

With an environmental engineering degree Ms. Shambulova has experience in research engineering projects and programs related to environmental impact assessment, audit, monitoring, risk evaluation, management, health and safety and other social and economic, design, and engineering and standardizatio

Environmental monitoring and assessment, M.SC.(Chemistry), P.G. Diploma in Environmental Management

Assistant professor-Hydrogeologist with 9 years of experience Main fields of expertise: -Evaluation of groundwater resources in various aquifers -Water supply schemes (well design, pumping tests etc.) Participated and led over 60 Research projects from 1995 Full PC and GIS skills

EXPERIENCE Environmental systems design and installation Site assessment and remedial investigation Wastewater treatment systems Project oversight and quality control

Software Engineer with over 15 years experience in the development of software, database designs and real-time software solutions.

20 years experience in EHS

40hr hazwoper, Confined Space Entry, Underground Storage Tanks, Industrail Hygeine, Industrail Safety, Lead Abatement, Lead Superviser

I am a strong team player with proven experience contributing in cross-functional teams to fulfill corporate goals, who communicates well both verbally and in written form, who shares his ideas and knowledge with others, who develops excellent working relationships to his co-workers and customers.

Broad knowledge of environmental chemistry and extensive experience in laboratory processes, instruments, equipment, quality assurance and control, analytical tutoring, and environmental auditing in 10 years of professional practice.

Eleven plus years of providing Environmental Management and consulting services experience in Asbestos and Lead Abatement Surveys/Designs/ Monitoring, Health & Safety, Emergency Response, Water Quality Management, Hazardous Waste Remediation, Industrial Hygiene, and Indoor Air Quality.

Proven professional experience in Manufacturing Processes in Ethylene, Ethylene Oxide, EthyleneGlycol and Ethylene Benzene, Process Design and Optimization. Experience with process control objectives to optimize unit operations.

M.E. in Environmental,2000,M.S. in Civil, 1993 Peer Consultants Rockville, Maryland Project Engineer May 2001-January 2003 Conducted research, design and implementation of lime stabilization processes of municipal bio-solids at the Blue plains Waste Water Treatment Plant in Washington D.C.

I have been working with the Mecklenburg County Department of Environmental Protection (MCDEP) since August 2000. I have had the 40-hour OSHA HAZWOPER training.

To work in a physically active and customer focused position using my vocational communication and practical skills and time management. Over 18 years experience as an electrician and supervisor in different firms. Project delivery. Excellent analytical, problem solving skills and breakdown.

Consultancy, Teaching, Research, Planning & Design exprtise and experience in Hydrology, Water Resources Engineering, Civil Engineering Systems & GIS inc. as Founder Director, National Institute of Hydrology, Roorkee, India and (Retd) Professor of Civil Engg, IIT, Kanpur

Admisnistrador de sistemas,Systems Administrator,Ingeniero de Sistemas,Systems Engineer,Ingeniero de Software,Software Engineer,Ingeniero Telecomunicaciones,Telecommunications Engineer,Project Manager

An MSc Holder in Environmental Practice; Pollution Management with trainings in oil spills from OSRL/EARL Limited UK, and health and safety course from Allied healthcare UK. Have experience in environmental consulting and researching. IT literate, able to use ArcGIS, work on own initiative or as par

Environmental / Safety Engineer More than 10 years experience

Safety Health & Environmental Engineer/Consulant/Energy

Civil engineer with some experience in environmental compliance and regulations

I am a Pro-Engineer Designer with experience up to Wildfire 3.0, Pdmlink 8.0 & 9.0, SAP, and Intralink 3.4.

I am Civil / Structural Engineer with 25 years of experience. Presenly I am working as a Lead Engineer for last 10 years. I work as a hands-on lead and comfortable with checking of calculations, doing schematic design and providing site support.

Sir, I have completed MASTER DEGREE in INDUSTRIAL SAFETY ENGINEERING at MEPCO SCHLENK ENGINEERING COLLEGE at Sivakasi, Tamilnadu in India.Also I appeared POST GRADUATE DIPLOMA in ENVIRONMENTAL MANAGEMENT through distance mode. In addition I completed BACHELOR DEGREE in MECHANICAL ENGINEERING also

ME Environmental Engineering and management in One year Exp in Wastewater treatment plant, & my skills is Designing of wastewater water treatment plant,Air pollution control,biological treatment system.

C,C++,MATLAB,ZMAP,GIS,CRISIS,SIGMA PLOT

Test Engineer

Microsoft office, Auto cad, SAP, Everstress, Winhwy

2 years of Knowledge of the environmental compliance requirement (40 CFR Part 60, 40 CFR Part 71, and 40 CFR Part 75); 4 years of experience working with continuous emission monitoring systems (CEMS).

Experienced Mech. CAD designer utilizing ProE, Solidworks,Autocad and assoc. PDM packages to work on electromechanical projects for companies in the medical, power generation, textile manufacturing, communication, consumer product, industrial and aerospace industries.

Phd in Geology, presently working as a hydrogeologist in central groundwater dept. india for the last 8 years

hold a Bachelor's Degree in Biomedical Engineering ,

„Ï 9+ years experience in PRODUCTION FIELD.

Bachelor in Engineering - Metallurgical Engineering.

Environmenatl Skills: Water reuse planning, ArcGIS, Energy, Wastewater Treatment, Remediation, BioWin, Modeling, Stormwater, Groundwater modeling

I am seeking a Well Site Geologist/Mudlogging position with a quality, client service oriented company. I have worked in Environmental Consulting and Mudlogging/Well Site Geology. My oilfield experience is in Utah, primarily in the Uintah Basin, and also in Colorado, New Mexico, Wyoming, and Texas.

Electronic integrated controls, PLC control, installation repair and preventative maintenance

Over 20 years with Department of Energy contractor experience with environmental management, remediation, regulatory compliance, pollution prevention, quality assurance and project management/ technical support experience. Excellent written and oral skill level.

Mining Engineer and Geologist with twenty-seven years in precious and base metals, coal and industrial minerals. Professional Engineering licenses in three states, with unique construction and environmental achievements. Advanced technical and strong supervisory skills.

Water industry: French citizen w/U.S. Green card; 27+ years experience in construction & operations and maintenance; electromechanical and site management skills; specialist in process component for W/WW systems

C/C++/ VB / SCADA / Electronic / Embedded / Automation / Systems Engineering

Installation of both computer hardwares and softwares. Knowledgeable in LAN/WAN configuration and troubleshooting. DSL and WiFi connections and configurations. Familiar with all types of Windows-based operating system.

Chemical Engineer with Masters Degree in Environmental Engineering and Management. Areas of experience include, hazardous waste management, remediation & cleanup, environmental impact assessment ISO 14000 and environmental audit.

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

A full time position to appreciate and explore a challenging environment in the field of Environment and Safety that offers Professional growth & advancement opportunity while being resourceful, innovative and flexible

Solutions-oriented Field Service/Application Engineer with a proven track record of delivering effective product engineering, maintenance and customization across a diversity of industries.

New Graduate with BS ChE and Geol. Industry experience!

Testing resume with 3+ years of experience

Reliability engineer, plant engineer, manufacturing engineer, expert in kiln and ball mills, hydraulics pneumatics

I have HND in Building Technology. I also have good knowledge of AutoCAD. I had been involved in construction work at different capacities.

1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out