Resume - Wire and Cable experience Warehouse Manufacturing experience

Misco Jobs

Resume #80244

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS
ƒÞ Over two years telephony experience
ƒÞ Four years supervisory experience
ƒÞ 17 years military experience
ƒÞ Plant manufacturing
ƒÞ Competent, reliable and committed professional with a proven record of success in assuming increasing levels of responsibility

PROFESSIONAL EXPERIENCE
May 2003 ¡V April 2008 Target Import Warehouse, Suffolk, Virginia
Inventory Management Team Member/Inbound Trainer/Inbound Team Member
ƒÞ Ensure quality is maintained for inbound freight and in the warehouse.
ƒÞ Responsible for performing audits on the inbound and outbound docks.
ƒÞ Perform audits in the warehouse to ensure pallets are in the correct locations and the correct items are on the pallets.
ƒÞ Process transfers from DC to DC and damaged freight.
ƒÞ Assist team members with resolving problems with inbound freights.
ƒÞ Responsible for training new team members on inbound processes, proper operation of warehouse equipment, operation of RF unit, and how to navigate the company intranet computer.
ƒÞ Responsible for receiving inbound freight pallets using a RF unit, RC forklift to stage pallets on the docks.
ƒÞ Transport pallets in the warehouse using pallet rider and use reach truck to stage pallets in the proper racks.
February 1999 ¡V May 2002 Verizon Connected Solutions, Newport News, Virginia
Multi Media Technician
ƒÞ Responsible for troubleshooting, maintenance, repair and installation of residential Plain Old Telephone Service (POTS) lines, interior wiring, and LANS.
ƒÞ Additional responsibilities include commercial and structured wiring, installing four room speaker systems, home theatre systems, and intercom systems.
November 1992 ¡VJanuary 1999 Canon Virginia Inc., Newport News, Virginia
Assembly 1 TSS
ƒÞ Supervised and coordinated assembly line personnel to maintain productivity.
ƒÞ Performed assembly inspections using knowledge of assembly standards to ensure quality control.
ƒÞ Responsible for troubleshooting defective units on assembly line at the component level using test equipment, flowcharts, and manuals.
ƒÞ Obtained comprehensive knowledge of all assigned assembly line workstations and assembly standards.
ƒÞ Knowledgeable in the use of tools such as air drivers, e-ring tools, electrical testing equipment, robotics, and grease applicators.
July 1991 ¡V July 2001 Virginia Army National Guard, Norfolk, Virginia
Staff Sergeant
ƒÞ Senior enlisted supervisor for the FIST and the establishment of FIST communications.
ƒÞ Conducted and evaluated FIST training.
ƒÞ Supervised maintenance of team equipment and the establishment of fire support.
December 1984 ¡V March 1991 United States Army
Specialist
ƒÞ Responsible for the maintenance and readiness of all battery weapons and the 155mm Howitzer.
ƒÞ Assisted with the maintenance and supervision of over $1 million dollars worth of equipment.
ƒÞ Nuclear weapons team member responsible for the proper handling and usage of nuclear weapons.
ƒÞ Served in Desert Storm.

EDUCATION/TRAINING
ƒÞ Basic ISDN Theory and Planning Course, March 2001
ƒÞ Commercial and Structured Wiring Course, February 1999
ƒÞ Advanced Installation and Repair of Residential POTS Lines, February 1999
ƒÞ Business Maintenance, February 1999
ƒÞ Pole Climbing and Gaffing Certification, February 1999
ƒÞ Basic Non-Commission Officer School, February 1996
ƒÞ Communication-Electronics Course, July 1995
ƒÞ Primary Leadership Development Course, October 1994
ƒÞ Army Special Weapons School, September 1986
ƒÞ Army Advance Course, April 1985

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 851 to 900 of 1624)

Go to Search Parameters...

Brief Description

Project Manager - Sales - Technical

I am 26 years old engineer of hydraulic and searching for traineeship in companies in Germany, Austria, Italy to get more and better experiences in my field of work and to grow in knowledge.

Over twenty years of experience

Mining Engineer with 20+ years experience, Supervisor of Drilling Crews, great work ethic, will meet deadlines and bottom line, effective team builder

Quality Management, ISO 9001, ISO 14001, OHSAS 18001, Lead Auditor of IRCA, TUV-CERT

Seeking Chemist, Laboratory, or Quality Control Position

MS-GIS, International MBA, Fluent english and spanish, basic Arabic

Manager / Engineer ( HW/SW/QA/Training )

Experience with Electrical and Instrumentation & Control Systems design which encompasses project estimating, equipment purchasing, design, build, programming, installation, start-up (commissioning) and field service/troubleshooting for the following: AC motor controls, MCC’s, VFD’s, MOV’s, AOV’s,

Marine + International Projects Oil & Gas

Technical Project Manager

PE in Mining, Environmental & Civil Engineering with 26+ years experience in surface coal mining management, engineering & environmental. I've held positions up to and including Vice-President of Operations. Well experienced in open pit dragline & truck/shovel operations. Well organized.

Piping/Mechanical Draughtsman (sewerage plant/Oil & gas)

B.Sc. in Environmental Engineering; M.Sc. in Engineering Management; ISO9001, ISO14001, OHSAS18001; EIA reports; EMMPs; translation (English / Turkish); MIDSS; management

Quailty Coordinator, Welding Specialist, Safety Training Coordinator, Operations Coordinator Prefer Former CIS Russia, Kazakhstan

Surgical Emergencies :- Road Traffic accident, crush injuries, blunt trauma abdomen,Head injury, liver tear, gunshot, spleen rupture, face injuries, stab injuries, spinal cord compression, assult injuries, burn injuries etc.n Medical Emergencies :Myocardial Infraction, COPD, sun stroke, snake etc.

Corporate Executive in Information Technology with extensive international experience in Systems/Product Architecture (Analysis & Design), Program/Project Management, Business Continuity Disaster/Recovery Planning, Technical Service Delivery & Support, Technical/Operations Management

Over 14 years of total experience in the industry of which 8 year’s industrial experience as Chemical Engineer. This is backed by 6 years of experience of implementation of Intergraph’s Plant Design System (PDS) software. The domain of PDS expertise comprises of piping and structural modeling, extra

Experienced offshore Client Representative and qualified Hydrographic surveyor; with Master's ticket, NEBOSH, MCSE .

Project Management / Inspection / Procurement / Quality Assurance

A seasoned engineering management professional with 11 years experience in petrochemicals, refinery, oil and gas industry in the field of reliability engineering and modeling, pinch technology and heat integration, consequence analysis, utilities modeling, energy efficiency studies , process simuln

Surveyor with diploma and 3 years of wide range of professional experience

Computer literate; proficiency in MS office, Excel, Power Point

I am looking for a position in the Geoscience or Urban Planning Industry. I have a Bachelors of Science in Geography with a Specialization in Geographic Information Science

Mapping Draftsman, Cartographer, CAD Operator, Survey Draftperson, Mapping, Draftsman, GIS Technician, GIS Operator

Results-Driven Leader/Senior Executive, BS/MS/PhD work ChE, MBA, PE, 25+ years experience

I am working with Gujarat Narmada valley Fertiliser company ltd which is a fertilizer and petrochemical complex and produces Ammonia, Urea, Acetic acid, Formic acid, Weak Nitric acid, Concentrated nitric acid, Ammonium Nitro phosphate, Calcium ammonium Nitrate, Aniline, TDI, Methanol.

To start a career with a highly reputed company to prove and develop my Skills in Network/System Administration

Oil and Gas Plant Superintendent / On Shore or Off Shore Production Supervisor / Senior Process Technician / Marine Terminal Supervisor, SIMOPs Coordinator / PTW Coordinator

I have a good experience in Plant Modelling using PDMS and knowledge about Pressure Parts & piping Stress Analysis.By majoring in PDMS, I have been exposed to ADMIN, DESIGN, PARAGON, SPECON, DRAFT AND ISODRAFT Modules. And, Iam also involved in creating 4D simulation and presenting of pro

Maintenance, water purification, reverse osmosis, materials, logistics, management

Worked experience of 4 yrs. in the field of EIA and EMP for various infrastructure and construction projects including world bank funded projects.

I have Excellent technical, communication and interpersonal skills with very good troubleshooting and problem solving skills and ability to work on multiple tasks in a fast paced environment independently and in a team. I can strive to make things work more efficiently and effectively .

Entry level electrical engineer resume

Strong knowledge in TCP/IP networks, windows 2000/XP, windows 2003 server, Active Directory, PC maintenance. Eletronic devices and debug. System monitoring and support. Requirement analysis and functional tests. Mobile network simulations using Agilent 8960 test set.

I am Electronics and Communication graduate and presently working in Saudi Arabia

Mining engineer with strong engineering base, team worker, comunicative, capable for individual work and research. Ready to work on a chalenging jobs, high level of computer litteracy. BSc diploma for mining engineer (5 year studies), currently on post graduate studies of mining.

Experienced Design Engineer

Eelectrical Engneer/Designer

I am working as a Mechanical/HSE Engineer in ADCOP (Abu Dhabi Crude Oil Pipe line Project) in Abu Dhabi, UAE. I have also got the training in Oil and Gas processing Plant for three months and also worked as a maintenance and sales engineer in SATAKE Corporation, JAPAN Pvt. Ltd.

Wire and Cable experience Warehouse Manufacturing experience

I have a diverse environmental experience derived from both industrial and international development sectors, from the corporate level to the field level -- over a wide range of environmental aspects and capacities. Currently eager to return to engineering roots.

An experienced security professional with 24 years of strong corporate security and law enforcement qualifications who has demonstrated a high level of success in a variety of significant and highly critical assignments in a fast paced environment. Also has an impressive track record of hands-on exp

I am a mining engineer and also has a masters degree in urban and regional planning.

recent chemical engineering graduate with 2 years of work experiences including R&D and industrial experiences. Experiences in pilot plant operations, bench tests, process engineer

I am a self-motivated, determined and organized individual who strives to perform any task to the best of my abilities. I have a strong background in 2D and 3D drafting, design and modelling and am capable of producing accurate and high quality drawings in a fast paced environment.

He has more than 25 years of experience; from his current work in hydrogeological and hydrochemical assessment, environmental monitoring, and capacity building. He has managed many projects as well as acted as team leader on various project components.

Repair and Maintenance, Product Quality Analyst, electrical fault analysis, acceptance testing, interpret drawings and schematics, advanced vibration, reliability growth testing, precise measuring equipment, tester platforms (Teradyne, Polaris, Fusion), power supply adjustment and replacement

Software Developer .NET, Java SQL

M. TECH. in chemical engineering with specilization in industrial safety and hazards mgt.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 [ 18 ] 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out