Resume - My capabilities have been achieved through many experiences which include traini...

Misco Jobs

Resume #80378

CONTACT INFORMATION:
View contact information...

I am seeking a challenging position utilizing my professional experience, skills, education, with motivation to grow and advance.

My capabilities have been achieved through many experiences which include training and support of in-house staff in multiple locations, while working on concurrent projects as a Sr Designer/Project Engineer.
The support includes the use Microsoft and CAD software. My experience spans the use of excel functions, such as logic equations and tools such as data links, assisting in the migration of data to and from CAD, reducing the need of redundant data entry.
A primary objective has been to focus on the improvement of productivity. By stream lining the design process; understanding local & regional jurisdictional standards and UBC codes. By using specific tools; road sections can be created, specific singular modifications can be made, benches at right of ways can be extended, cut/fill slopes modified,… as break lines are imported defining centerlines, flow lines, curbs and daylight boundaries. Subsequently; in highway design, drainage problems are identified, super-elevated curves are manipulated as speed changes effect site distances and in residential design, pad elevations projected. A 3D model is created,… rendered. With minimal effort you now can then provide volume calculations, quantity takes-offs and area tables using CAD tools and VBA/lisps.
My recent experience has allowed me to model in excess of 80 existing pipelines (tile drains); created within 5 pipe networks. In addition, proposed sewer, water and storm drain networks. The model included multiple surfaces; existing ground, multiple proposed rough and finish grade surfaces derived from a tentative tract map of a master planned community encompassed by of 3 major arterials. As well as the natural water level since the project was located at a negative surface level. The key purpose was to show the impact each existing pipeline had on the proposed and how each surface impacted each other. By cutting sections across model we were able to identify the multiple impacts, enabling us to alter specific pipelines, utilities and roadways as needed.
My experience includes many public works projects, from sewer and water extensions, to roadway widening, culvert crossings along with miles of overlay. I have assisting in the process identifying cost savings by eliminating excessive removals with the use of survey data verse proposed designs. This was achieved by manipulating roadway designs, adjusting site distances and other vertical design criteria.
Additionally, I am familiar with military environment and I have over ten years of experience working in the compressed gas industry; including the design, installation and maintenance of automated control systems for piping, storage vessels, cryogenic pumps, and vaporizers. Including the use of analytical hardware and processes used to maintain component purity.

In this brief summary, my objective has been to give you a small explanation of how my level of experience with the use of a continuously evolving software, can productively, through planning and with incite perform as a Sr Designer/Project Engineer.

OBJECTIVE

I am seeking a challenging position utilizing my professional experience, skills, education, with motivation to grow and advance.
My objective has been to give you a small explanation of how my experience with the use of a continuously evolving software, can productively, through planning and with incite perform as a Sr Designer/Project Engineer.

EXPERIENCE

2008- Present Sr. Cad Technician
Engineering Consulting Services, Inc. Lexington, KY

Responsible for the design and creation of surface mining maps for permitting the extraction of geologic coal seams. Using design methods and Cad standards as defined by the state standards and other specific requirements defined.
Responsible for running earthwork calculations; volume take-offs, etc.
Responsible for initiating in house design standards and continuing advancements towards bringing the latest Cad technologies on line and in use. Lead and coordinate user as advancements are established.
Review drawing and designs, files, naming conventions to ensure adherence to established standards.
Responsible for preparing planning exhibits and conceptual designs through verbal and written communication.
In charge of maintaining of overall design, file structures, and design standards for assigned projects.

2005- 2008 Project Engineer \ Sr. Designer
K & A Engineering, Corona, CA

Responsible for the design and creation of TTM's, on through the production of rough grading, street, sewer and water…etc. Using design methods and standards as defined by jurisdictional standards and other specific requirements defined. Responsible for the direct transition into production as a final design is approved.
Responsible for running earthwork calculations; volume take-offs, etc.
Responsible for coordinating design teams, ensure smooth, correct and timely production of workload.
Responsible for continuing advancements towards bringing Civil 3d (2008) on line in our office. Lead and coordinate user lunch and learning events, coordinate training on site or off site. Review drawing and designs, files, naming conventions to ensure adherence to established standards.
Responsible for preparing planning exhibits and conceptual designs through verbal and written communication from clients.
Responsible for communication and coordination to maintain client relationships.
Responsible for billings and budgets.
In charge of maintaining of overall design, file structures, and design standards for assigned projects.

2000- 2005 Designer / Project Engineer
Nolte Associates, Corona, CA

Responsible for training, Cadd support, project file structures and design standards for Corona office.
Design and processing of subdivision and public roadway projects.
Responsible for keeping projects within budget.
Responsible for dealing directly clients.
In charge of maintaining the CSUF Master Plan. Working directly with CSUF engineering department. Point of contact for all new projects for ongoing CSUF expansions. (Projects to date; Parking structure I, & II, College blvd. realignment and the addition of the new Law college expansion)

1997-2000 Computer Design/Engineer, Partner
Gas Technology Systems, LLC

Designed, programmed, built and installed Automated Compressed Gas filling & Analytical (data acquisition) systems into regional Gas plants.
Gas Systems automated the complete process from the Storage vessels, the cryogenic pumps, vaporizers, to the single cylinder filling manifolds to pallet filling of air gases (Ar, N2, O2) and other components (CO2, He & H2) to mixtures.

Analytical System also automated the process of analyzing the components validating the specific specifications for different products (industrial, food, high purity and medical grades). The automated process controlled trace oxygen, moisture, hydrocarbon analyzers measuring specific components to part per million levels. The system controlled gas chromatographs with differing columns to quantify percent of ingredients.
Create customized software allowing single point selection of component, or mixture from a customized database.
Created new programs to facilitate the processing DOT requirements for Medical Gases.
Provided 24/7 support, including onsite training for end users and
Administrators.
Linked filling process to second party tracking software.

1993 - 1997 Computer Design/Engineer, Owner
MJK Analytical Systems

Designed, programmed, built and installed Automated Compressed Gas filling systems.
Automated the process of pumping cryogenic (liquid) air gases (Ar, N2, O2) and other mixing components (CO2, He & H2) using high pressure cryogenic pumps, ambient and high temperature vaporizer to fill high pressure cylinders. The process used pressure vs. temperature and/or weight to measure the appropriate volumes.
Create software allowing single point selection of component, or mixture from a customized database.
Created programs to facilitate the processing DOT requirements for Medical
Gases.
Provided one-on-one onsite training for users and administrators.

1990 - 1993 Technician
Air Liquide, Inc
Santa Fe Springs Ca & Walnut Creek, Ca

Responsible for maintaining plant processes.
Responsible for designing and installing new processed upgrading existing plant design.
Investigated existing plant production for funding of production enhancements.
Responsible for training, production crew for OSA requirements, basic operation and plant updates.
Worked globally with Air Liquide headquarters USA, Canada & France, enhancing and developing worldwide production methods.

EDUCATION

1980 - 1983 USMC, Paris Island, SC Combat Engineer
Camp Lejuene, NC Journeymen (Engineer Training)
Camp Pendleton, CA Demolitions (Combat Engineering)

1983-1985 University New Hampshire, Industrial Electronics
Associates in industrial Electronics
Durham, N.H.

1986 Beta Technical Institute
Computer Added Drafting Technologies,
Bellflower, CA

2003-2005
2008 Fall Mount San Jacinto Community College,
Continuing my pursuing for an EIT
Menifee, CA

Ongoing Courses in AutoCAD, Land Development Desktop, Civil 3D, 2006, 2008
Carlson, Civil
Microstation, Inroads
Microsoft: Word, Excel, Access, PowerPoint

*Private & Public Project Experience and Referrals upon request.

SKILLS

Software AutoCAD, Land Development Desktop, Civil 3D, thru- 2008
Carlson, MapCad, Microstation, Terramodel
Haestad Methods; Storm CAD - Storm & sewer Systems
Microsoft: Word, Excel, Access, PowerPoint

Areas of Design Commercial, mapping, grading, drainage, engineered waste management plans Land Development, residential tracts, grading and earthwork,
Mapping, Final maps, Tentative Tract Maps, Permitting
Public works, utility extensions, roadway widening, rehab/overlays
Road design, widening, striping, rehab/overlays
Utilities; sewer & water, storm Drain.

During the time I worked with Engineering services I used core samples to identify coal seams within 4 adjacent permits. With client input the specific mining types were identified by seam. Using aerial topography a collective 3d model was built. Using contour, area or augur mining, an undercut surface was built projecting from down from upper most seam with defined slopes and benches. With the subsurface built a post surface is projected from the lowest seam matching the preexisting terrain unless added criteria were defined. Volumes were the extrapolated for spoils, reclamation and coal for each permit.
When I began with K & A Engineering I assisted in providing initial engineering services preparing lot studies, land use plans, utility layouts and tentative tracts maps, in addition to providing mapping. I lead the generation of a continuously evolving 3d surface with infrastructure for eight of twelve concurrent tentative tract maps for the Boulder Springs project.
Once final engineering was underway, I assisted in the prepared Rough Grading Plans, Street improvement Plans, Sewer and Water Improvement Plans. These plans included off site Sewer Lift Stations, 8,000 feet of off site sewer main with 5,000 feet being a force main.
Once Final engineering was underway on the Boulder Springs South project I began working on as the project engineer. This project was similar, starting with 334 lots on the tentative map. This project was intricate because the project was split by a 300' wide water course being crossed by a 6 lane arterial. The crossing requiring three 40' by 9' arch culverts. Additionally in order to provide secondary access to the second half of the project it was necessary to run an arterial to the nearest primary county route three miles away. This added a lot of coordination since the undeveloped land had existing tentative tract maps owned by multiple developers.
Working with Nolte Associates I worked on Canyon Heights which is a 400-lot subdivision rated as rural mountainous, which has slopes of 25% or greater. Beside the normal challenges, it was necessary to make drastic changes to the adjacent primary access road after new county ordinances upgraded its speed and capacity. In turn it became necessary to minimize right of ways, super elevated the cross-section to met speed requirements and enable site distance requirements to be met.
The project design included: constructing a grass-lined, trapezoidal, channel section in an existing unnamed stream bed; the construction of drop structures; a rip rap revetment to protect proposed homes; off-channel water quality basins and an existing, "in-channel", 65-acre-ft, detention basin.
Another stimulating project was for the City of Poway making improvements to Poway road (one mile). The project included the widening, the construction of landscaped center medians, pavement rehabilitation, restriping for increased street capacity and the reconstruction of an adjacent earth channel. Additionally, as part of the widening, the expansion of & addition of a box culvert, doubling the capacity was necessary.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 1619)

Go to Search Parameters...

Brief Description

Project Manager, Business Systems Analyst, and Information Developer

Maintenance, HVAC, MAnagement and Supervision, Safety

Gas turbine expert, Engineering, Rotating Equipment technician,MechanicalEngineering

Over 20 years management, construction, production and sales experience dedicated to achieving profitability and delivering outstanding customer service. Energetic professional with exceptional analytical, organizational and people skills. Strong personal ethics and integrity. Treat each customer as

Land Surveyor Crew Chief

GIS Specialist, MTech(GIS), M.Sc & B.Sc Honors(Geology), Expert in ArcGIS, AutoCad, MapInfo and database managment.

Bilingual (English and French) Engineer with +13 yrs Petroleum Production, Wellsite and Operations experience in Oil & Gas and +3 yrs in Construction and Environmental work. Worked for Shell, Vermilion and Maurel & Prom in Africa, Europe and North America. US resident.

Drafting, estimating, typing, computer literate: MSWORD, MSEXCEL, COREL DRAW, AUTOCAD, POWERPOINT, PIPES & PIPES++

B.Sc. , Microsoft® & CCNA Certified / 10-years IT experience in India/GULF

mind setter for Safety, and condition builder

A highly motivated and enthusiastic analytical chemist seeking a full time laboratory position. Team-player as well as individual worker. Well-organized, detailed oriented, quick learner.

Big believer in teamwork, organization and co-operation, have the ability to perform well under pressure, hard worker, able to behave as a leader, manage stress.

I am available for all your open positions regarding my qualifications - Technical/Managerial/Projects positions, throughout Europe/Middle East & Africa.

I have held management/technical positions with the companies listed within my resume for over 20 years specializing in construction, environmental, mining, mineral/material processing and chemical manufacturing businesses. I have significant experience in all functional areas & P/L responsibility.

Construction manager, laborer, Class A CDL Drivers license, mechanic

Maufacturing Automation

I have work experience in United States, SE Asia, and China. I am a registered Professional Engineer (Civil) in State of California, USA. I am looking for a professional/managerial position in civil engineering/construction. Project experience and publications are available upon request.

Mechanical, electrical, structural maintenance & repair, estimating, project supervision.

Electronics Engineer exp. in OPTICAL FIBRE , RF, WIRELESS, PROJECTS ROLLOUT

I am a graduate in Chemical and Process Engineering.

Surveyor engineer, civil Engineer, quantity surveyor

My capabilities have been achieved through many experiences which include training and support of in-house staff in multiple locations, while working on concurrent projects as a Sr Designer/Project Engineer.

Telecommunication Engineer seeking a Summer Internship with high skills in wireless and broadband sector. Proficient in C,C++ and JAVA programming.

Executive Certificate in Workplace Health and Safety Manag ment

I am a plant and piping designer (PDS) - 11 year experience

see resume

Competent HSE Officer and registered with Department of Occupational Safety & Health Malaysia, Lead HSE MS Auditor with NCSB. Diploma in Occupational Safety & Health.

I can doa high level operation for most of equipments.

D.A.E. (Mechanical) 1970/3300 Second 1989

Qualifications in chemical process & equipment designs especially in energy and environmental industries, looking forward to enter marketing & procurement fields.

Reservoir characterization expertise including geological integration and interpretation of data (wireline logs, core, and seismic), petrophysical property modeling, geostatistics, geocellular modeling, and flow simulation. Proficiency with Petrel and other industry standard applications.

I am a Structure / Civil Engineer with 12 years expertise in Structure and infrasturctures for Petrochemical, Oil & Gas, CPO (Crude Palm Oil), Mining, Geothermal Power and Cement Projects

Both geophysicist and computer enginner with good skills and experience in mining and oil & gas industry. Seeking a challenging position with growth and responsabilities.

Leadership, teamworking skills, high communication and interpersonal skill, advanced analytical and problem solving skill

I am an experienced HSE Professional knowledgeable with program-procedure development and implementation, accident-incident prevention and investigation, root cause analysis, supervision, contractor compliance, security programs, medical programs, health and food programs, environmental programs

Highly organized, detailed oriented and self motivated Lead Engineer having 6 years of professional experience in the field of product development/sustaining engineering

Dedicated Cost Engineering Professional with exceptional project corresponding skills, multinational work experience and extensive abilities in Cost estimation, Quantity surveying, Claim analysis, Tendering, Contract administration, Cost monitoring/reporting, Schedule monitoring, Bid management, Bud

Managed three R&D labs, namely, Failure Analysis Lab, Mechanical/Metallography Lab, and Metrology Lab

Experienced Mechanical engineer as Tunneling specialist in operation,maintenance,construction tunnels and executing projects.

I have successfully managed a business for some time and then completed an applied geology course at the Camborne School of Mines, this was essentially a practically based course that introduced and developed many aspects of geology, mining and environmental management systems.

I would like to bring to your kind notice that I have got Ph.D in Hydrogeology, post M.Sc. (Tech.) in Hydrogeology, M.Sc Geology from prestigious Andhra University. I am having 15 research publications in National and International reputed Journals. I have Completed 2 major Research Projects

I am indeed looking for an opportunity to work as a Project Engineer as they are involved at every stage of development - from concept to development to production which would enhance my knowledge about a broad range of operations, with a chance of personal growth within the company.

Network Engineer MCA + 7 year EXP

work in the industries of chimical,

Engineer / EMS / SCADA / Electrical / Telecom / Power Sector

Computer networking, electronics services and repairs computer maintainace communication system and intercom. Electrical power system,control systems and automation. I am holder of a Liecentiate in electrical engineering and a certificate of enginnering in electrical and electronics enginneing

Experienced GA Certified Water Treatment Plant Operator, strong engineering background.

I worked with some Distillation Columns, Heat Exchangers, CSTRS, PFR, and Batch Reactors in the laboratory. In these laboratories we learned to put all the results into a report.

A dedicated and enthusiastic Master’s graduate in Control Systems & Instrumentation with two years job experience in the industry

MS in Environmental Engineering - Geo-Resources Emphasis ( 5years )+ Diploma of Specialization in Mining Sciences and Technologies (Post-graduate Research 3 years) - Freelance experience in QUARRY PLANNING-DESIGN and ENVIRONMENTAL ASSESSMENT (2 years)

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out