Resume - Project Management / Lean Training / PFMEA (Process failure modes and effects an...

Misco Jobs

Resume #80554

CONTACT INFORMATION:
View contact information...

EDUCATION:
Bachelor of Science, Industrial Engineering
Louisiana Tech University, Ruston, LA

OBJECTIVE:
To acquire productive employment with a company that will challenge my technical skills along with enhancing my communication and leadership skills.

SKILLS AND ACCOMPLISHMENTS:
TECHNICAL/RESEARCH
- Completed line-balancing project to improve worker productivity over 40%.
- Completed Standard Work project, which improved output 50% by maximizing worker efficiency.
- Managed the design, construction and implementation of two module assembly lines to full production.
- Managed multiple projects assigned by senior management and completed each task timely and accurately.

COMMUNICATIONS
- Audited processes for quality improvements, design and effectiveness.
- Coordinated numerous quarterly Process Engineering meetings on key measurables with all engineering staff from other Plymouth Tube Co. facilities, which involved presentations, leveraging from opportunities, information sharing and lessons learned.
- Assigned objectives, goals and career development needs through evaluations for Plymouth Tube Co. and Louisiana Army National Guard staff.
- Monitored staff on daily activities to ensure efficiency and updated management on future planned activities.

MANAGEMENT/LEADERSHIP
- Lean Enterprise Leader/Instructor for entire Thomas Products, Monroe facility.
- Managed 25+ staff members.
- Managed tooling department inventory, budget and staff for Plymouth Tube Co.
- Created and implemented operational policies and procedures for Kerr McGee Corporation.

RELEVANT EXPERIENCE:
Lean Leader II
Thomas Products Division, Gardner Denver Company, Monroe, LA.
Direct, coordinate, and exercise functional authority for planning, organization, control, integration, and completion of Lean Enterprise projects throughout entire facility. Plan and formulate Lean programs and organize project teams according to project requirements. Train and assign project personnel to specific phases or aspects of projects. Coordinate activities concerned with development, scheduling, and resolving production problems. Prepare interim and completion project reports (5/2008 – Present).

Manufacturing Engineer II
Thomas Products Division, Gardner Denver Company, Monroe, LA.
Provided leadership in training and development of production operators to effectively use new and established Lean Enterprise techniques. Developed workplace layout and assisted in developing overall facility layout to insure economic production flow. Conducted studies and developed sound recommendations for the implementation or improvement of machining/production techniques. Responsible for design, development and application of in-house tooling as required (8/2005 – 5/2008).

Quality Engineer
Manpower, Monroe, LA.
Guide Corporation, Monroe, LA.
Performed inspections and set quality assurance testing models for analysis of raw materials, materials in process, and finished products. Updated PFMEA, PCP and PFD to remain compliant with QS9000 regulations. Analyzed the reliability in design, production and consumer satisfaction of company products. Developed methods and measures of analysis based on customer and contractual obligations. Tested finished products for quality purposes and recommends changes to product specifications as necessary (7/2004 –7/2005).

Manufacturing Engineer
CalsonicKansei North America, Canton, MS.
Planned and designed manufacturing processes from pilot to fully operational for two automotive module assembly lines. Maximized worker efficiency by auditing and analyzing layout of equipment, workflow, assembly methods, and work force utilization. Determined parts and tools needed in order to achieve manufacturing goals according to product specifications (11/2003 – 7/2004).

Process Engineer
Plymouth Tube Company, West Monroe, LA.
Responsible for project planning, designing and implementing manufacturing processes and equipment. Planned, organized, led and performed process development and lean manufacturing initiatives in order to achieve manufacturing excellence. Created, developed, maintained and improved tooling department cost and output (7/2002 - 11/2003).

Second Lieutenant
Louisiana Army National Guard, Ruston, LA.
Responsibilities included project management, staff evaluation and development, leadership and team building. Organized and scheduled projects needed to train, develop and prepare staff to make decisions in most stressful situations and acting on their decisions in an appropriate and timely manner (4/1997 - 9/2004).

REFERENCES: Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1251 to 1300 of 1622)

Go to Search Parameters...

Brief Description

Project Engineer Automation Controls Instrumentation PMP Certified 9+Years exp Plant Automation PLC SCADA DCS Project Manager CAP

NEBOSH Certified HSE advisor, HSE Trainer, Tech-IOSH member

Capable working with minimum supervision as solids control and drilling waste management eng, Mechanical skill, computer and management.

Project Engineer wit BSc of Chemical Engineering and experiences in oil and gas

Perform concurrent duties of a project manager which involve the management of several Aramco and non Aramco projects in close coordination with the client and/or his representatives and with the engineering design team

Mechanical Engineer with proficiency in IDEAS, Nastran

A dynamic accomplished Information Technology Professional with unique combination of experience in Networking and Hardware. Strong Analytical, Organizational and problem solving skills. Ability to identify Operational Deficiencies, skilled in applying Technology and Administration practices to impr

Mechanical engineering finite element analysis composites ansys Master's

Highly organized and innovative Manager with an exceptional track record of cost minimization through creative procurement approaches and proactive management style focused on building trust and improving departmental teamwork in fast paced union environments.

PLANNER SMELTER

PDMS-11.6, PDS-7.1, Autocad-2006, CAEPIPE 5.11, Pro-E Wildfire2.0

Handled operations Batch Chemical Processes, Fermentation, Distillation, Extraction, Evaporation, Plant Utility Section, Pumps & Compresors, Safety of 3M's and Housekeeping, Maintenance & Overhaul of Operations, Troubleshooting, Startup & Shutdown of the operations in the cGMP environment etc.

Experienced Project Controls Specialist in engineering and construction industry. Skilled in project cost, scheduling, analysis and forecasting .

analyst

Research and Development Metallurgist . Seeking career prospects in metallurgical processing, mineral resources (ferrous metals, base metals, precious and rare metals), process improvement and optimization, research and development, project management, process-business analysis

Coordinate services for wells,oversee project,finalize all paperwork and run daily reports for wells.

Seeking a full-time position in Quality Assurance

Junior GIS Specialist ( Mapinfo pro. - Arc GIS .....).. Geologist

Retired PAF personnel having 25 yrs of experience and also remianed as instructor.

Degreed Electrical Engineer with Pro/E Wildfire 2.0 and Pro/Cabling training

7 years engineering and management experience in the oil and gas industry. PMP certified with extensive civil engineering experience.

SAP FICO consultant with 10 years experience

A senior cost & controls engineer with extensive experience and a professional qualification in Mechanical Engineering coupled with a strong background in project management,project controls, contracts administration,variation orders &claims management.International experience in large EPIC projects

Seeking Chemist or Laboratory Technician Position-will relocate

Research Thesis on ANTENNA/RF

Can handle all operations of a mine surface or underground. See resume for additional experience and qualifications.

Manage systems, hardware software, connectivity link, Manage Active Directory,Manage DHCP Serverý

Having good leadership qualities, I can effectively lead and motivate a team. Possesses good inter-personal skill. I value success, which gives me the motivation and drive necessary to achieve personal and company goals. Experience in safety and 5S system implementation

Health, Safety, Environment

Strong knowledge in electronics industries PCB design, assembling, trouble shooting

Professional mechanical/industrial engineer seeking a project engineering managmenet or consulting position. Offer extensive engineering and management skills in the industry.

Geologist with background experience in Mining and Exploration of mineral resources- gold and base metals. QAQC for sampling projects. Ability to prepare technical Exploration reports for Project Managers incl drilling proposals.MapInfo, Micro-Mine, Vulcan, MP3, MS-packages.Ore reserve calculation

Master of Science in Mechanical Engineering Zone and Energy Manager, Facilities Maintenance Manager

CHEMICAL PLANT OPERATION

Project Management / Lean Training / PFMEA (Process failure modes and effects analysis) / PCP (Process Control Plan) / PFD (Process Flow Diagrams) / Lean Manufacturing / 5S / Value Stream Mapping / Visual Management

HVAC, Maintance

I have been working as a Computer Technician for the past two (2) years. I received eight (8) CXC subjects and BSc. in Electronics and Communications from the University of Technology. I also have two (2) years engineering related experience working with TCom/Huawei Technologies/CLARO.

Driven by innovation and integrity as a member or your technical group I will be able to provide technical drafting support using the latest version of Microstation, Intergraph, Auto Cad and other GIS, ICGS software platforms. In addition, perform non-routine and complex drafting assignments, Coordi

I started my career in 1991. I am a qualified fitter & turner (trade) Currently working as a workshop foreman. Did courses in inspection (QC) and management.

Hard working and Dependable Environmental Professional

Eletro/Mechanical Technician, Applications Engineer

Pro Engineer 2+ years experience

I have an ability to grasp new concepts quickly and clearly to apply my knowledge and experience for tackling tricky situations.

Visual C++, C#, Visual Basic, Java, J#, Pascal, PROLOG Tools:1.Professional: Microsoft Visual Studio.Net, C builder, Java Visual Age, SQL Server 2000 2.User level: Microsoft Office, Visual Studio, Web Studio, Oracle 9i, Scripting and markup languages: HTML, XML, XSL, VBScript

I WAS DONE B=TECH IN MECHANICAL ENGG WITH 72% MARKS & ALSO DONE DIPLOMA IN MECHANICA;L ENGG & I HAVE ALSO THREE YEAR WORK EXPERIENCE

I have been involved in developement and implementation of various safety programs and helping create safety cultures within organizations on and off the job. My most recent assignments have been in UAE and Mexico as a HSE Manager and I would like to continue in this role.

Experienced Automation/Process Control Engineer

1 year Wellsite Geologist/Mudlogger; 7 months experienced Varian Gas Chromatography; 2.5 years experienced Staff & Project Hydrogeologist and Environmental Field Technician

FRAMME (Intergraph), Microstation (Bentley Systems), Projectwise, C++, Microsoft Office, HTML, Matlab, AUTOCAD,

10+ Years Experience PLC Programming PC Board Testing/Repair Test Point Systems

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 [ 26 ] 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out