Resume - Catia V5, Unigraphics, Pro-Engineer, Solid Edge

Misco Jobs

Resume #80796

CONTACT INFORMATION:
View contact information...

Objective: - Intend to build a career with the representatives of Design environment.

Experience: -

* Company Name: Atkins Aviation & Defense Systems (Sharjah, UAE)

Designation: Design Engineer

Job Responsibility:

A400M Certification (Onsite UK) June08-Present
Managing Configuration Items (CI) for A400M aircraft wing and use those to form different check stress analysis work package to certify A400M aircraft wing. This task involves tracking any modifications in wing parts in design stage which will affect on certification of aircraft and include those changes in check stress analysis work package. Also responsible for producing forecast release dates of assemblies, installations and components. This activity involves working with client and check stress team leads.

A350 Project Management (UK) June08-Feb'09;
Helping Project Manager to manage finances of the project as a project assistant.
Involved in taking care of hours booking and extra expenses occurred in the project.

AIRBUS UK – A400M Rib Pad Ups (Onsite UK) May'08;-June'08;
This job involves verification and validation of Rib Pad ups in A400M for MSN6 aircraft. Rib pad ups are mainly designed by Airbus Bremen, our job is to perform check on those pad ups in order to maintain the aerodynamic shape of the wing with in tolerance level. This task involved working with client and other suppliers.

A350 Engine Pylon Conceptual Design (UK) Feb'08; - Apr'08;
This includes conceptual design of mounting of engine pylon on wing with primary and secondary structure attachments. My role is to look at secondary structure and optimize design to minimum weight and design aft pylon attachments.

A350 High Lift Trade Studies (UK) Nov'07;-Feb'08;
Involved in the conceptual design of flap tracks (A scheme) for A350 in non stream wise motion on trailing edge. Design upgrades of parts from status 9 to status 10 reference geometries. Conceptual design of full height actuator bracket in order to support upper panels for distributing loads. Modification of hinge ribs, common ribs, intermediate ribs with sizing and fastener data. This task was carried out incorporating the members from design and stress.

A400M Fuel Pump Fairings (UK) June '07;-Oct'07;
Design of the two most outboard fuel pump fairings support structure on the A400M. Responsible to produce installation drawings for Stage 01 and Stage 03 build for MSN1 and design of bonding cleat to protect fairing from lightening strike.

A380 Smoke Generator Redesign (UK) May '07;
It includes design of forward and aft attachments of smoke generator pylon and consideration of bird strike and lightening strike for design of pylon.

A380 Check Stress MSN2/4 (UK) Apr'07;
Producing the data to stress engineers for analysis by making the detail drawings of the wing part to satisfy the requirement of MSN 2/4.

A380 Check Stress MSN007 (UK) Mar '07;
Producing data with help of CADDS 5 and managing it with iProNET & PRIMES data management systems.

* Company Name: Expert Solutions (INDIA) Pvt. Ltd.

Designation: Technical Support Executive

Period: 13 March 2006 to 10 February 2007

Job Responsibility: Onsite & offsite CAD design project handling based in Pune & Aurangabad. Implemented Engineering change process by taking company from NO CAD to ALL CAD environment.

Skill Set: -
* Unigraphics CAD/CAM: Solid Modeling, Surface Modeling, Draft, Assembly, Sheet Metal, and Manufacturing.
* AIRBUS CATIA V5, CATIA V5: Solid Modeling, Surface Modeling, Draft, Assembly, and Sheet Metal.
* Pro\Engineer: Solid Modeling, Surface Modeling, Draft, Assembly, and Sheet Metal.
* Solid Edge: Solid Modeling, Surface Modeling, Draft, Assembly, and Sheet Metal.
* Solid Works.
* Auto-CAD: 2D Drafting.
* Product Data Management (PDM).
* C & C++
* Ms-Office

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1401 to 1450 of 1619)

Go to Search Parameters...

Brief Description

INSTRUMENTATION ENGINEER

Planning, Scheduling, Primavera, Risk management, Pertmaster

I am an M.Tech in Energy Technology and M.Sc in Chemistry. Have Experience Non Conventional Energy Field. Well aware of Electrochemical Power Sources like Fuel Cell, Battery etc. Basic computer skills including language C, C++, Matlab etc.

Mechanical Engineer with wide experience in Manufacturing, Maintenance, Sales and Service, Application Engineering, Project Engineering and Administration. Total experience of 30 years. Can work in any field like Construction, Hospitality Industry and Process Industry.

Ms-word,Ms-Excel,Proficient in management,General HSE certification, HSE Competency Development Course Level 3

If you need a dedicated expert heavy equipment/drill rigs/are welder/fab/design, hydraulics, air compressors, all around field/shop management, i can design/build & repair anything with or without a big budget, will work on contract are as needed!!

Cummins Sales & Service Pakistan (Power Generation)(Nov2007 – to date)Mining Experience(2004-2007):

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

Repairs, servicing, maintenance of electronic systems

iosh managing safely and osha in construction safety and health qalified hse officer with 9 yrs experience in safety. other trainings attended: basic rescue, work safely at heights, scaffolding, first aid, fire fighting etc. work experience in india and middle east in construction projects.

Geology degree and Geology Honours degree. Two years exploration geology experience. Currently busy with Masters degree in Hydrogeology on part time basis. Working as geologists at Hydrogeology company.

Detail oriented Instrument and Controls technician seeking international opportunities

20 years experience in Industrial Electronics, Electrical,Mechanical, Pneumatics, Hydraulics

Involved in all construction activities including fabrication , installation and control off all structural items.Steel structural estimates include, pipe-racks, elevated pipe supports, pump shelters, access platforms, handrails, et

2 years experience in an Open pit coal mine. I have done long term planning for pit and dump, various professional reports, tailings dam design and monitoring, and yearly budget planning. Therefore, I have experience in both mining and geotechnical engineering.

Good time management, ability to work with or without supervision and a working experince in a oil and gas industry

Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department

Dynamic Health & Safety Coordinator Looking For Work In Mining, Heavy Construction Or Oil Industry

im interested in doin marine and i spoke wel in english and i know hindi also and my specification is doin work in any circumstances

Occupational Health Safety & Environmental Practitioner, Post Gruate Cert. in OHS&E Management

Workplace Safety Health Environment Coordinator - Moreton Island Oil Spill Clean Up Project

12 years experience in instrumentation mining processing plant.holder of a craft certifitecate in process control instrumentation.

Chemical/Natural Gas Engineer

Education: M. Sc., Chemistry, Specialisation: Heterogeneous Catalysis; Work experience (current occupation), Researcher, Subject: Preparation supported metal catalysts, Goal: Development self-invented technique; International experience: Manager & windsurf instructor, Aruba, Dutch Antilles

Commissioning, servicing, maintenance, diesel gensets, engine-alternator alignments, overhauling diesel engines.

HSE ENGINEER AND SUPERVISOR

Graduated 09/2004 in Master of Science (Mechanical Engineering) from The University at Buffalo, The State University of New York. Emphasis: Design Optimization. 8 years experience in facilities management (water, fire protection). Extensive experience in South and South East Asia.

Twenty-two years in leadership and management with ten years experience in the Petrochem/Paper Mill industry. Ten years in health and safety in the fields of general construction, maintenance, Turn Around/Shutdown. Able to identify at risk behaviors, trends, and policy infractions through observati

BE in Mechanical Engineering.

Maintenance Technician

Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.

Marine Geologist with experience in Bathymetric, Oceanographic, Geophysical and Geotechnical Data Processing and QA/QC. Proficient in MicroStation, uSMART and InRoads mapping softwares.

To obtain a challenging, high demand QA/QC, Power Generation Tech, Electrical or Mechanical position utilizing my skills and experience in all fields.

Catia V5, Unigraphics, Pro-Engineer, Solid Edge

Working as a Piping Supervisor in the field of Oil/Petro-Chemical industries Maintenance & Project Work.

I have the qualifications and experience you are seeking. I am certified as a Journeyman Refrigeration Mechanic, Journeyman Electrician, and Controls Technician. My experience includes over 17 years in construction and service of mechanical systems.

Seven years of hands on mining experience in surface and underground mining of rock salt, silica sand, high alumina clay (fire clay), and limestone

Supply Chain and Procurement Professional with international oil and gas project experience!

Comupter And Office applications, Microsoft word proficiency,Good analytical skills

I have done B.Sc Chemistry with First class & also i have prior experience in Bhart Petroleum Co. Ltd as a Process Trainee.

Rangeland Ecology and Management Degree

CSWIP 3.1 Welding Inspector, MIGAS Welding Inspector, Familiar with Software (Auto Cad, PDMS, Pro-Eng), Familiar with Microsoft Office (Word, Excel, Power Point, Visio)

Diploma in computer engineering from state board of punjab

Security, life support, camp management, logistics

Bilinguel (CSST) Construction Site Safety Technicion

I am an enthusiastic highly motivated Quantity Surveyor / Cost Engineer, with an excellent working knowledge of pre & post contract quantity surveying and also pro-active team member with experience of major construction projects. I have gained deep awareness of contract administration and advanced

Technical Writer / Editor and Proposal Writer

Electrical engineer (2 years experience),researcher(1 year experience)

Five-year experience in metallurgical projects from the Gold and Nickel industry. Two-year plant and pilot plant experience. Speak, read and write English and Chinese (Mandarin). Familiar with pressure leaching at high temperature.

Sr.Chemist / Chemist , Quality Assurance / Control , Researching and Development, Production Supervisor Or eq. Position.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [ 29 ] 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out