Resume - I am Diploma in Mechanical Engineering. I have adequate knowledge in Auto-Cad in...

Misco Jobs

Resume #80798

CONTACT INFORMATION:
View contact information...

OBJECTIVE

I am willing to give total drawing-design support the organization, with the experience and capability that I have, in order to achieve organization's goals and create mutual benefits.

FORMAL EDUCATION & QUALIFICATION

Diploma in Mechanical Engineering from Jalpaiguri Polytechnic Institute in 1998.

Scored: 1st division (74% marks).
Main subjects: Drawing, Thermal engineering, Workshop Technology, Theory of Machine, Strength of Material, Engineering mechanics, Machine tools, Automobile, General engineering etc.

Higher secondary from Barada Prasad High School, Garia in 1994.

Scored: 2nd division (54% marks).
Main subjects: Mathematics, Physics, Chemistry, Biology, English etc.

Secondary examination from Tentulberia Anukul Chandra High School, Garia in 1992.
Scored: 2nd division (59% marks).

WORK EXPERIENCE

1. From July 2007- Steel Plus Limited (A MNC in steel structure & construction)
GN-37/B, Sector-V, Salt Lake. Kolkata 700 091. India.

Field of work: Involve in steel structure drawing, detailing & designing for Canam manac group (Cyprus).

Working as: Structural Detailer.

Responsibility:

Independently drawing & detailing of Steel structure by X-Steel (Tekla structure), SDS 2 & Auto-CAD.

Executed Project detail:

NVI Pedestrian Bridge: 1,200 tons steel.

Metro North Rail Road: 256 ft. long railway bridge.
Location: New York.

RTC Project (center de service metro bus)
Location: Quebec.

Passerella St. Martin: 835 tons steel.
Location: St. Martin.

1. May 2006 – June 2007: Premier Irrigation Equipment Ltd. 17/1C Alipore Road, Kolkata 700027. India. Works: Boral, Garia.

Field of work: Manufacturing of fountains, Irrigation equipments, Fun-tech ride simulator etc.

Worked as: Designer Draughtsman.

Responsibility:

Various types of component drawing for pipeline & pipefittings. (By Auto-CAD & MDT).
GA & Lay-out drawing for erection & commissioning of fountain & irrigation system. (By Auto-CAD & MDT).
Prepare bill of materials for fountains.
Design of nozzles, valves, etc. & select pump for water conveying & irrigation tank.
measure samples & prepare drawing for production. (By Auto-CAD & MDT).
Direct involvement on various types of R & D Project.
Draw electric circuit diagram of various fountains.
Technical documentation & presentation sheet. (By Word, Excel, and Power point etc).

2. July 1998 to April 2006: Shimna Engineering Pvt. Ltd. 1 Kuchil Sarker lane, Howrah 700101.

Field of work: Manufacturing of spare parts and machine for jute & fiber industries throughout the country & over seas. They also involves in development & upgrade of jute machineries.

Worked as: Asst. Designer-cum-AutoCAD Draftsman.

Responsibility:
Design for conversion of traditional jute machines for improving productivity & space. (By Auto-CAD & MDT).
Design & draw of various machine parts like shaft, pulley, gear, jig & fixture, gable, beam, chute & jute conveying system etc.
Preliminary Design of Gearboxes for various type of jute machinery.
Power transmission calculation of Chain- Sprocket Drive and Belt- Pulley Drive for jute conveying system.
Communicate with clients & buyers for drawing & design.
Draw & design of plant for layout & commissioning. (By Auto-CAD & MDT).
Prepare bill of materials for machines.
Draw electrical circuit diagram of various machines.

TRAININGS

Diploma in Auto-Cad in 1998.
3 month model training in Mechanical Desk-Top.
18 month Post Graduate Diploma in Hardware & Networking from Jadevpur University (Project Impact) in 2006.
Basic training about the computer operating on windows (MS Word, MS Excel, MS Power Point, Internet) and DOS programming in 1992.

SKILLS

Structural Detailing using X-Steel (Tekla)- v 13.1.
Structural Detailing & analysis by using SDS 2 v 7.25, 7.039, 7.045.
Proficient operation on Auto-CAD (R-2006) & MDT (V-4).
Computer documentation & Internet access.
Hardware & Networking Trouble shooting.

PERSONAL INFORMATION
Date of Birth: 28th November 1975.
Nationality: Indian.
Category: General.
Blood Group: A Positive.

PERSONAL INTEREST

Reading (story, psychological study, computer literature)
Listen music (soft, instrumental).
Sports (cricket, tennis, football)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 801 to 850 of 1597)

Go to Search Parameters...

Brief Description

Western IT and data networking expertise. Enterprise and Telecom experience. PMP holder

Handle preventive maintenance for the machine , servicing machine ,replace breakdown component /or equipment.

RSLogix 5000, PLC 5, SLC (Allen Bradley) Concept (Modicon, Quantum) Unity (Modicon, Quantum, M340, etc.) Setting up and commissioning of Advantys IO systems Rockwell, RSView Wonderware, Intouch

MSc Engineering / Business Development / Project Management /Energy fielsd

Environmental pre-construction surveys for wetlands, streams, and wildlife habitat; knowledge of wetland plants, soils, and delineation rules as well as general ecological knowledge. 10 years of experience on pipeline projects.

Fully qualified safety proffesional, with extensive experience in the construction industry, Rigging & Lifting Supervisor and Qualified Engineer please review CV for all qualifications & working background

ISO Implementation, Documents, Records, Archival Management, QA Manager, Writing Technical Documents, Auditor

Certified Safety Professional with over 20 years experience, in multiple industries, including oil and gas, medical, transportation, environmental and manufacturing.

Quality Control professional

Rotating & reciprocating equipment technician

Research Experience: Polymer solutions and adsorption behavior.

Looking for Instrumentation and controls job

Professional Land Surveyor

Electrical Engineer and Computer Sciencer

I graduated Lakeland College’s Environmental Protection Technology Program in April 2009. This summer and last I worked as an Environmental Research Technician with the Native Plant Development and Habitat Restoration Program at the Alberta Research Council in Vegreville, Alberta.

1. Designing, Estimating and Costing 2. To make the perspective techno commercial offer

I am a qualified Metallurgy and Materials Engineer with international research and training experience. I am a person with strong organizational skills and am very confident in analyzing and solving problems with positive outcomes. My past studies in Metallurgy and Materials Technology and the resea

Proficient in reading mechanical drawings and designing using Auto Cad, CATIA, NX-IDEAS.Strong Technical writing and presentation skills along with good hold in MS - Office.Master of Engineering (G.P.A - 10.33 out of 13)(2008- 2009)University of Windsor.

Summary of Qualifications: Proficient in this engineering software: 3D - PDS Equipment, Piping modeling/design,Isogen, SmartPlant Review, Microstation, AutoCad. Industries: Nuclear, Energy, Power, Petroleum / Refinery, Chemical, Logistics, Transportation, Manufacturing and Defense.

Mechanical Engineer, technical support

Eco-friendly Architect, Revit, Autocad, 3D max, SketchUp, Photoshop, Flash, Coral-draw, Illustrator, Rhino3D.

Basic Soft Skills (Communication Skills, Presentation Skills, Team Working, Technical & Business Writing)

3rd Year Enviromental Technologist

Sales, Engineering Project Manager

Mining and geological engineer from the university of Liege with a specialization in geophysical methods and geotechnics.

Project Manager, Field Engineer, Commissioning Electrical Switchgear

ISO/ASNT certified Vibration analyst ,More than three years of engineering experience ,Analytical skills and self learning ability,committed to any work unconditionally,Able to work under pressure,Able to liaison between technical groups ,Proven ability to improve efficiency

I have 3 years experience in the Design industry. I self taught myself on AutoCad and Microstation.

Experience in Instruments of PERKIN ELMER and applied bio-system, installation, commissioning, maintenance, and calibration of various instruments;

Electrical Engineer with wireless, optical and integration expertise

Applying for the post of safety officer in your esteemed concern

Mechanical/Manufacturing Engineering, Project/Program Management, Supply Chain Management

Environment, safety, health, quality, security, international, lean manfuracturing, construction, operation, management

PhD (Geology), Post MSc Diploma (Hydrogeology), MSc (Applied Geology). Working as GIS Professional and previously worked as Geologist, Lecturer in Environmental Science and GIS Professional.

Computer Technician

Principal Environmental & Safety Consultant, oil, gas, mining & major projects; EIA, EMS, Environmental risk etc, climate change, HAZOP, HAZID, Safety managment etc experience. Relocating to Vancouver. Has right to live and work in Canada

Automobile related

Electrical Engineering, Energy Systems, Power electronics

I am Diploma in Mechanical Engineering. I have adequate knowledge in Auto-Cad in mechanical engineering field. I also have confident experience in X-Steel & SDS2 in steel structure back ground.

Graduate Electrical with Power Electronics

Prevent / correct unsafe acts & condition.

Project Manager - Sales - Technical

I am 26 years old engineer of hydraulic and searching for traineeship in companies in Germany, Austria, Italy to get more and better experiences in my field of work and to grow in knowledge.

Over twenty years of experience

Mining Engineer with 20+ years experience, Supervisor of Drilling Crews, great work ethic, will meet deadlines and bottom line, effective team builder

Quality Management, ISO 9001, ISO 14001, OHSAS 18001, Lead Auditor of IRCA, TUV-CERT

Seeking Chemist, Laboratory, or Quality Control Position

MS-GIS, International MBA, Fluent english and spanish, basic Arabic

Manager / Engineer ( HW/SW/QA/Training )

Experience with Electrical and Instrumentation & Control Systems design which encompasses project estimating, equipment purchasing, design, build, programming, installation, start-up (commissioning) and field service/troubleshooting for the following: AC motor controls, MCC’s, VFD’s, MOV’s, AOV’s,

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 [ 17 ] 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out