Resume - Bachelor in Engineering - Metallurgical Engineering.

Misco Jobs

Resume #81421

CONTACT INFORMATION:
View contact information...

Objective:
To obtain a position in the Engineering Service Industry, where I can utilize my previous work experience and expertise to advance in to upper level management.

Education:
Degree: Bachelor of Engineering (B.E.)
Branch: Metallurgy
College: Faculty Of Technology & Engineering
University: Maharaja Sayajirao University, Vadodara, Gujarat, India.

Work Experience:

Name of the company: Elecon Engineering Company Limited,
Location: Vallabh Vidyanagar, State: Gujarat, Country: India.
Company is engaged in Heavy Engineering Equipment Manufacturing i.e. Material Handling Equipments like stacker reclaimer, loader – unloader, long material conveying systems and Industrial Power Reduction Gear Boxes.

Positions & Working duration:

Senior Manager:
2004 Onwards.
Along with above responsibilities added responsibilities given were over all In-charge of Heat Treatment Shop, Metallurgical Quality Control & Material Testing Laboratory i.e. Metallography, Mechanical testing of Metallic material & Chemical analysis of Metallic Material.
Deputed as Coordinator to Management Representative for ISO 9001 implementation and Maintenance in the entire organization. Document preparation and implementation at all stages.
Deputed as Technical Manager & Quality Manager to implement & maintain the accreditation of Material Testing Laboratory according to ISO / IEC 17025. Document preparation, authorization, distribution & implementation within the laboratory.
Vendor development, educating them for QMS & TQM etc.

Manager:
1998 to 2004.
Along with above said responsibilities the added responsibilities for Quality Control at Inward stage, Process stage and final stage added for Metallurgical and Dimensional. Here also take care of Hardness & Dimension measuring instruments and metallurgical microscope with image analyzer. Process improvement, validation etc. to achieve & fulfill customer requirement. Write down the SOP and implement in the routine work..

Deputy Manager:
1988 to 1998.
During this period along with above said responsibilities worked for process improvement and establishment. Here I have change the process parameters, accessories etc. to achieve consistent quality with minimum cost & rejection or rework. This effort produces effective process cost reduction to the 30% i.e. saving in electricity and consumables and reduction in process cycle time i.e. productivity increased by 12%. Process improvement with process cost reduction.

Technical Executive:
1984 to 1988.
During this period along with Junior Engineer responsibilities worked for fixture selection (here I have recommend to change the material of fixture from Mild steel to Heat Resisting steel) which gave maximum utilization, improved output, improved life of fixture, minimum distortion, reduction in process cost and reduction in rejection cost etc. Planning & Production responsibilities.

Junior Engineer:
1980 to 1984.
During this period I have to look after the day to day working of Heat Treatment shop. Maintaining and updating log book with day to day working. Supervising the workmen and routine work and controlling various processes like Carburising, Hardening, Tempering, Annealing, Isothermal Annealing Pearlitizing, Normalizing, Stress Relieving etc. Here worked in all the three shifts.

Technical Apprentice:
1979 to 1980.
During this period I have been trained to work on shop floor in Heat Treatment shop.

Additional Responsibilities:

Assisting / helping / guiding in vendor development for bought out items for the organization.

Educating, developing and helping in upgrading the subcontractors to comply with the specified requirements.

Helping for establish TQM / QMS at vendor end.

Assisting / guiding Design & Development Department for selection of material & heat treatment according to the application.

Carry out metallurgical failure investigations and suggest remedies / changes in process sequence / material condition etc. to relevant department.

Maintaining all relevant documents for process, quality records and all test data in a proper manner that can be retrieve by all relevant easily as and when required.

Initiating budget proposals for testing equipments and other resources according to expansion plan, modernization, testing reliability improvement and effectiveness.

Managing fabrication of steel to steel, steel to alloy steel, steel / cast iron to non ferrous, steel to stainless steel.
Preparing, implementing & maintaining WPS, WPQ & PQR for various welding processes according to ASME SEC IX.

Personal: Marital status: Married
Children: One daughter & one son
US residential status: Green card holder, can work for any employer in United States.

References:

* Available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 201 to 250 of 1597)

Go to Search Parameters...

Brief Description

HVAC Field Service,BAS,DDC

With an environmental engineering degree Ms. Shambulova has experience in research engineering projects and programs related to environmental impact assessment, audit, monitoring, risk evaluation, management, health and safety and other social and economic, design, and engineering and standardizatio

Environmental monitoring and assessment, M.SC.(Chemistry), P.G. Diploma in Environmental Management

Assistant professor-Hydrogeologist with 9 years of experience Main fields of expertise: -Evaluation of groundwater resources in various aquifers -Water supply schemes (well design, pumping tests etc.) Participated and led over 60 Research projects from 1995 Full PC and GIS skills

EXPERIENCE Environmental systems design and installation Site assessment and remedial investigation Wastewater treatment systems Project oversight and quality control

Software Engineer with over 15 years experience in the development of software, database designs and real-time software solutions.

20 years experience in EHS

40hr hazwoper, Confined Space Entry, Underground Storage Tanks, Industrail Hygeine, Industrail Safety, Lead Abatement, Lead Superviser

I am a strong team player with proven experience contributing in cross-functional teams to fulfill corporate goals, who communicates well both verbally and in written form, who shares his ideas and knowledge with others, who develops excellent working relationships to his co-workers and customers.

Broad knowledge of environmental chemistry and extensive experience in laboratory processes, instruments, equipment, quality assurance and control, analytical tutoring, and environmental auditing in 10 years of professional practice.

Eleven plus years of providing Environmental Management and consulting services experience in Asbestos and Lead Abatement Surveys/Designs/ Monitoring, Health & Safety, Emergency Response, Water Quality Management, Hazardous Waste Remediation, Industrial Hygiene, and Indoor Air Quality.

Proven professional experience in Manufacturing Processes in Ethylene, Ethylene Oxide, EthyleneGlycol and Ethylene Benzene, Process Design and Optimization. Experience with process control objectives to optimize unit operations.

M.E. in Environmental,2000,M.S. in Civil, 1993 Peer Consultants Rockville, Maryland Project Engineer May 2001-January 2003 Conducted research, design and implementation of lime stabilization processes of municipal bio-solids at the Blue plains Waste Water Treatment Plant in Washington D.C.

I have been working with the Mecklenburg County Department of Environmental Protection (MCDEP) since August 2000. I have had the 40-hour OSHA HAZWOPER training.

To work in a physically active and customer focused position using my vocational communication and practical skills and time management. Over 18 years experience as an electrician and supervisor in different firms. Project delivery. Excellent analytical, problem solving skills and breakdown.

Consultancy, Teaching, Research, Planning & Design exprtise and experience in Hydrology, Water Resources Engineering, Civil Engineering Systems & GIS inc. as Founder Director, National Institute of Hydrology, Roorkee, India and (Retd) Professor of Civil Engg, IIT, Kanpur

Admisnistrador de sistemas,Systems Administrator,Ingeniero de Sistemas,Systems Engineer,Ingeniero de Software,Software Engineer,Ingeniero Telecomunicaciones,Telecommunications Engineer,Project Manager

An MSc Holder in Environmental Practice; Pollution Management with trainings in oil spills from OSRL/EARL Limited UK, and health and safety course from Allied healthcare UK. Have experience in environmental consulting and researching. IT literate, able to use ArcGIS, work on own initiative or as par

Environmental / Safety Engineer More than 10 years experience

Safety Health & Environmental Engineer/Consulant/Energy

Civil engineer with some experience in environmental compliance and regulations

I am a Pro-Engineer Designer with experience up to Wildfire 3.0, Pdmlink 8.0 & 9.0, SAP, and Intralink 3.4.

I am Civil / Structural Engineer with 25 years of experience. Presenly I am working as a Lead Engineer for last 10 years. I work as a hands-on lead and comfortable with checking of calculations, doing schematic design and providing site support.

Sir, I have completed MASTER DEGREE in INDUSTRIAL SAFETY ENGINEERING at MEPCO SCHLENK ENGINEERING COLLEGE at Sivakasi, Tamilnadu in India.Also I appeared POST GRADUATE DIPLOMA in ENVIRONMENTAL MANAGEMENT through distance mode. In addition I completed BACHELOR DEGREE in MECHANICAL ENGINEERING also

ME Environmental Engineering and management in One year Exp in Wastewater treatment plant, & my skills is Designing of wastewater water treatment plant,Air pollution control,biological treatment system.

C,C++,MATLAB,ZMAP,GIS,CRISIS,SIGMA PLOT

Test Engineer

Microsoft office, Auto cad, SAP, Everstress, Winhwy

2 years of Knowledge of the environmental compliance requirement (40 CFR Part 60, 40 CFR Part 71, and 40 CFR Part 75); 4 years of experience working with continuous emission monitoring systems (CEMS).

Experienced Mech. CAD designer utilizing ProE, Solidworks,Autocad and assoc. PDM packages to work on electromechanical projects for companies in the medical, power generation, textile manufacturing, communication, consumer product, industrial and aerospace industries.

Phd in Geology, presently working as a hydrogeologist in central groundwater dept. india for the last 8 years

hold a Bachelor's Degree in Biomedical Engineering ,

„Ï 9+ years experience in PRODUCTION FIELD.

Bachelor in Engineering - Metallurgical Engineering.

Environmenatl Skills: Water reuse planning, ArcGIS, Energy, Wastewater Treatment, Remediation, BioWin, Modeling, Stormwater, Groundwater modeling

I am seeking a Well Site Geologist/Mudlogging position with a quality, client service oriented company. I have worked in Environmental Consulting and Mudlogging/Well Site Geology. My oilfield experience is in Utah, primarily in the Uintah Basin, and also in Colorado, New Mexico, Wyoming, and Texas.

Electronic integrated controls, PLC control, installation repair and preventative maintenance

Over 20 years with Department of Energy contractor experience with environmental management, remediation, regulatory compliance, pollution prevention, quality assurance and project management/ technical support experience. Excellent written and oral skill level.

Mining Engineer and Geologist with twenty-seven years in precious and base metals, coal and industrial minerals. Professional Engineering licenses in three states, with unique construction and environmental achievements. Advanced technical and strong supervisory skills.

Water industry: French citizen w/U.S. Green card; 27+ years experience in construction & operations and maintenance; electromechanical and site management skills; specialist in process component for W/WW systems

C/C++/ VB / SCADA / Electronic / Embedded / Automation / Systems Engineering

Installation of both computer hardwares and softwares. Knowledgeable in LAN/WAN configuration and troubleshooting. DSL and WiFi connections and configurations. Familiar with all types of Windows-based operating system.

Chemical Engineer with Masters Degree in Environmental Engineering and Management. Areas of experience include, hazardous waste management, remediation & cleanup, environmental impact assessment ISO 14000 and environmental audit.

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

A full time position to appreciate and explore a challenging environment in the field of Environment and Safety that offers Professional growth & advancement opportunity while being resourceful, innovative and flexible

Solutions-oriented Field Service/Application Engineer with a proven track record of delivering effective product engineering, maintenance and customization across a diversity of industries.

New Graduate with BS ChE and Geol. Industry experience!

Testing resume with 3+ years of experience

Reliability engineer, plant engineer, manufacturing engineer, expert in kiln and ball mills, hydraulics pneumatics

I have HND in Building Technology. I also have good knowledge of AutoCAD. I had been involved in construction work at different capacities.

1 2 3 4 [ 5 ] 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out