Resume - Expert in quality analysis and various management system.

Misco Jobs

Resume #82643

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
------------
Bachelor of Science in Industrial Engineering December 1995
University of Missouri-Columbia (United State of America)
- CGPA: 3.113/4.0
- Dean's List: 1994 ~ 1995
- Academic Acknowledgement Letter (by Malaysian Ambassador in the US): Spring 1995

Certificate of Education Preparation Center July 1993
Indiana University-Purdue University at Indianapolis Undergraduate Education Center Malaysia
- Honors: Spring 1993

Sijil Pelajaran Malaysia – SPM (Malaysian Education Certificate) November 1989
Mara Junior Science College, Perlis
- First Grade (9-aggregrates)

OBJECTIVE:
------------
To expand knowledge and skills towards career development, at the same time shall strive for an organization's objective and targets in which I'm part of the team.
------------

WORK EXPERIENCE:
------------
Teknik Janakuasa Sdn. Bhd. Oct. 2002 ~ Current
System and Method Engineer (Quality Manager)
a. Migrated Lumut Power Plant (LPP) Quality Management System from ISO 9002:1994 to ISO 9001:2000.
b. Developed Safety Documents and Management Systems for Lumut Power Plant (base on ILO requirements).
c. Developed Integrated Management System (integrating ISO 9001:2000, ISO 14001:2004 and OHSAS 18001:2007 for Tanjung Bin Power Plant [TBBPP] into one management system known as Quality, Occupational Health and Safety, and Environment Management System [QHSE-MS]). The same system also being adopted by Lumut Power Plant (LPP) and Prai Power Plant (PPP).
d. Developed, implemented and maintained Hazard Identification and Risk Assessment and Control (HIRAC) system to ensure safety of personnel in TBPP. The same system being adopted by LPP and PPP.
e. Developed Safe Work Permit systems in TBPP, LPP and PPP.
f. Ensuring the QHSE-MS is maintained and continually improved in accordance to ISO 9001:2000, ISO 14001:2004 and OHSAS 18001:2007 Standards. Also to report on performance of the QHSE-MS to the management for review as basis for improvement of the system.
g. Promote and provide training awareness among employees and contractors alike within the organization on the customer requirements.
h. Ensure certain predefined documents and data which are use in the O&M of TBP are controlled, approved, and updated. This includes ensuring that the most current version of documents is readily available and easily accessible and that the soft copies of controlled documents are appropriately backed-up and stored.
i. Ensuring best practices are followed and business processes comply with TJSB QHSE generic procedures. Consider and actively develop improvement potentials for all processes by adapting QHSE guidance documents to reflect the requirements of the Power Plant.
j. Develop and maintain a high safety and quality conscious working environment, and ensure compliance with all QHSE and legislative Health & Safety and Environmental requirements.
k. Introduce, develop and implement 5S program at workplace.
l. Liase with external parties on matters related to QHSE-MS.
m. Support other Power Plants where appropriate.
n. Lead Auditor for ISO 9001:2000 and OHSAS 18001:2007.

Matsushita Electronic (M) Sdn. Bhd. 1996 ~ Sept. 2002
1. Industrial Engineer (High Frequency Product Division) 1996 ~ 1999
a. Assembly Line Efficiency improvement project
- Line improvement projects with the objectives of increasing the productivity rate and cost saving by using RIAL (Redesign for Improvement through Analysis of Line System). Project involved identifying and eliminating or reducing any non-value added activities which may co-exist within the assembly process to improve the productivity rate and line efficiency.
b. Assembly Line automation project
- Replace certain assembly manual processes into automation to reduce running cost and quality problem.
c. Support Assembly Line
- Provides facilities for production assembly lines, in particular during the pilot run of new products.
- Setting-up the correct profile setting for product soldering machine.
d. PCB Solder Printing improvement project
- Improving the solder printing machine template by re-designing the soldering pin.
- Re-designed product pallets to improve solder printing quality.
e. Steering Committee for setting-up ISO 9001:1994 Quality Management System
- Set-up procedure for equipment calibration
- Set-up procedure for on-line machine verification
- Perform QMS Internal Audit f. Steering Committee for setting-up ISO 14001:1996 Environmental Management System
- Conduct Environmental Aspect/Impact identification.
- Assist EMR to set EMS objectives and Targets.
- Perform EMS Internal Audit and Inter-Matsushita Audit.
2. Quality Assurance Engineer (total assembly line) 1999 ~ 2001
a. Total Assembly Line quality assurance
- Monitor quality rate and failure cost rate of process line and report performance to Production Manager.
- Set-up Yearly Quality Targets and Objectives.
- Assist Production Manager in Business Plan preparation.
- Train line leaders in quality analysis.
- Facilitate Assembly Line QCC groups.
- Perform QMS and EMS Internal Audit
- Perform Process audit b. P-Up 30 project
- A process improvement activity with the objectives of increasing the productivity by 30%.
c. F-Cost reduction project
- Quality improvement project which involved investigation of any customer quality claim and process lot rejection. The activity includes the reduction of Failure Cost rate for the assembly line.
3. Management Representative (High Frequency Product Division) 2001 ~ 2002
a. Implementing and maintaining ISO 9001 and ISO 14001 systems.
b. Reporting the Quality and Environmental Management System performance.
c. Plan annual QMS and EMS activity (includes External Audit, Internal Audit, Management Review, Process Audit, etc).
d. Provide training on QMS and EMS related matters.
4. Lead Auditor for ISO 9001:1994 Quality Management System (QMS) 2000 ~ 2002
5. Lead Auditor for ISO 14001:1996 Environmental Mgt System (EMS) 1998 ~ 2002
6. Facilitator for Matsushita Quality Control Circle (QCC) 1998 ~ 2002

------------

EDUCATION & CERTIFICATION:
------------
Bachelor of Science in Industrial Engineering December 1995
University of Missouri-Columbia (United State of America)
- CGPA: 3.113/4.0
- Dean's List: 1994 ~ 1995
- Academic Acknowledgement Letter (by Malaysian Ambassador in the US): Spring 1995

Certificate of Education Preparation Center July 1993
Indiana University-Purdue University at Indianapolis Undergraduate Education Center Malaysia
- Honors: Spring 1993

Sijil Pelajaran Malaysia – SPM (Malaysian Education Certificate) November 1989
Mara Junior Science College, Perlis
- First Grade (9-aggregrates)
* Substantial knowledge of quality performance study and analysis using 7QC tools, 7 New QC tools, 8D discipline, Cp, CpK, etc.
* Substantial knowledge on Human analysis (ergonomics and human factors), Motion and Time Study, Operation analysis and Workplace design, Production Planning, Plant and Facility layout including Material Handling.
* Substantial knowledge of ISO 9001:2000, ISO 14001:2004 and OHSAS 18001:2007 management systems.
* Knowledge of typical legislation associated with occupational health and safety and environment matters.
* Good organisational skills.
* The ability to reach satisfactorily negotiated solutions.
* The ability to speak and communicate effectively in English and Bahasa Malaysia.
* The ability to work independently, a team player and possess good interpersonal skills.
* Computer literate (e.g. Microsoft Office, SAP, Auto CAD)

Certification: Lead Assessor for OHSAS 18001:2007 & ISO 14001:2004
------------

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 251 to 300 of 1619)

Go to Search Parameters...

Brief Description

I have HND in Building Technology. I also have good knowledge of AutoCAD. I had been involved in construction work at different capacities.

Peoplesoft Technical Consultant

A self-motivated and task-oriented Chemical Engineer with 10 years experience and proven track record working in the manufacturing environment of an MNC.

Hydrologist - Telemerty IT Manager

Ph.D. computer Engineering M.sc. Electrical and Computer Engineering B.sc telecommunications

SUMMARY A Postgraduate of Mechanical Engineering with Ten years of Industrial Experience in Design Department using CAD/CAM/CAE/Robot Simulation Software and involved in design various Project Installations.

Expert in Environmental Engineering, I plan to work and live in Abu Dhabi.I am qualified in Environmental Protection for: Environmental Certification, Environmental Surveys, and Environmental Pollution Monitoring for Oil & Gas Industry with 10 years experience.

Expertise in Multidisciplinary Integrated Uranium exploration,Airborne Geophysical Surveys, Remote sensing, GIS, MIS, Exploration Geochemistry, Field Geology, Exploratory Drilling

Basic erection , maintenence , and installation and overview of performance and specific energy report generator and adjustment woth wind energy units with electricity board and a guy willing to achieve innovate in wind turbine generators

PLC HMI Programmer

A Highly self-motivated and goal-oriented Equipment Engineer , Enjoy working with the team and offer more than 4-years track of record demonstrating strong analytical and problem solving skills, computer and autoCAD drafting proficiency, and the ability to handled work under pressure.

Seeking professional or technical employment in Software Engineering, Computer Science, or Web Development. Offering extensive education and experience in computer science and mathematics.

Expertise in analysis of Chemicals, petrochemicals, petroleum products using instruments like ICP-OES, GC, HPLC, AAS, FTIR, CS Analyzer etc. Having expertise in SPC / SQC techniques, LIMS and SAP QM module. Research in Petrochemical and petroleum products. Worked for Chevron Oronite lube additive co

Expert in quality analysis and various management system.

Environmental Specialist

I am basically possessing engineering background with enough experience in organisation and can able to perform all kinds of works pertaining to my field. i am having 10 years of handful experience and can deal any work effectively and complete the same within time schedule.

My area of expertise is in Clastic Digenesis. I have a background in sediment logy, sedimentary petrology, and geochemistry. My graduate work was expanded to include courses in environmental aqueous geochemistry and hydrology.

I am Vasanth Sastri S. from Singapore, I am a B.E(EEE) graduate 2007 passed out batch, I am having two plus yrs of experience in programming of various Modicon PLCs, testing and exposure and Detail engineering. I enclosed my updated CV for your consideration.

Test engineer performed testing and designed test environment and programmed some of the test units.

Construction & oil and gas & auditing

ETP designing,EIA,ISO

technical and professional experience includes working with environmental regulatory agencies, environmental and industrial consulting, environmental and process engineering, contaminant fate and transport modeling, and contaminant remedial design and implementation.

Gold Medalist Environmental Engineer from Regional Engineering College, Surat, Gujarat, India seeking an internship or entry-level position

Student of BS-CS (4 year) and i am currently working in networking feeld form last 2 and half year.

Project Management

Senior Environmental, Social, Community and Communications Professional -- supporting complex international programs and projects with challenging deadlines, technical issues, financing, stakeholder communications and budget constraints.

22 yrs of experience in Govt of India, engineering consultancy firm (An ISO 9001 Company) and has wide exposure from basic engg to detailed engg of multi disciplinary mega projects related to Water and Environmental engineering, Infrastructure, Heavy Industry, Oil & Gas, Urba

MCSE, CCNA

MSc Environmental Engineering Graduate

1998-2002 University of Cape Coast – Ghana, Bsc. (Hons.) Chemistry, A highly enthusiastic, versatile, dedicated, well-organised and innovative scientist with broad ranging exposure, A highly enthusiastic, versatile, dedicated, well-organised and innovative scientist with broad ranging exposure

Intelligent, highly motivated environmental professional with broad-based skill set.

Qualifications include Masters of Engineering Science (Groundwater Studies) and Bachelor of Environmental Engineering. Could work as environmental engineer covering wide range of fields, or a hydrogeologist, including the geophysical and geochemical aspects of that position.

I would like to have a career in a progressive organization in a highly compititive environment.Play an active role in a dynamic teamand subsequently become involed in major ways in the activities of the organization.

Sustainable development & enivironmental specialist, hydrogeologist/groundwater modeller

I am enrolled in a Water Quality Technology Program. I am nearing the end of my second semester of studies and looking for a temporary position (4-8 Mos.)in a treatment facility to enrich my academic learning. I am available from the beginning of May 2004 - end of August 2004.

Broad range of experience in water, wastewater and haz waste treatment. Mangament experience and varied overseas work experience.

NDT

Sr. Technical Assistant in Soil & Water testing lab atleast `15years experience

Engineering / Construction Mgmt – Over 25 years combined experience supporting large domestic & international project assignments in both Home Office & Field locations. Business lines include Mining & Metals, Nuclear Power, Nuclear Waste Handling, & Refinery / Chemical (Oil / Gas, & Hydrogen) Plants

B.Tech Chem engg + MBA (marketing) with 10+ years in Project Management in O&G / Petrochemical Projects

M. Sc. Environmental Technology (specialization in Environmental Engineering) , Wastewater treatment (Aerobic and Anaerobic process), Water disinfections, Air pollution measures and solutions (sound level measurement, air monitoring and air emis

Completing a postgraduate degree in Land reclamation and Restoration, my background is as a scientist with oil and gas exploration and data management experience, with career development into civil engineering land survey in the waste management and construction spheres.

Seeking a position in Geo-Environmental Engineering providing the opportunity to make a strong contribution to organizational goals through continued development of professional skills.

Environmental scientist with MSc in Soil Science. Project and laboratory experience in soils, heavy metals, nutrient management, wastewater and bio solids, and statistical analysis. Strong background in teaching and communication.

Geologist with 8 years mudlogging experience.

Seeking a challenging and satisfying position in a top class signalling organization and to benefit it and my personal self through continued application of my professional and technical skills Work Experiance in McML Systems :

Junior Environmental Engineer

MS in Civil and Environmental Engineering Experiences: Water/Wastewater Engineering; air pollutant control project Skills: pilot study, mechanical attitude, project management, data analysis, report writing and presentation, various computer software packages

Field Investigation, sample collection, Watershed protection study, Groundwater management, Maps, Cross-section & Report creation

Sr. Geotechnical Engr, Design and Construction of Underground Structures, Mgmt of Multidisciplinary Projects, Numerical Modeling, Rock Mechanics, Ground Support Design, Tunnel Inspections, Hands-on Experience in Applying FLAC, FLAC3d, UDEC and 3DEC Codes in Design, Work Under NQA-1 Q A Program

1 2 3 4 5 [ 6 ] 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out