Resume - I&C Technician with geothermal experience

Misco Jobs

Resume #84151

CONTACT INFORMATION:
View contact information...

Experience

8/2006 ¡V 11/2008
Fagen Incorperated Granite Falls, Mn.
Startup and Commissioning Corporate Representative

Successful check out, startup and commissioning of 12 ethanol plants totaling nearly 1 billion gallons per year capacity.

Activities and responsibilities included:
„« DCS programming verification and modification/correction feedback
„« DCS network functionality including fiber optics
„« DCS I/O loop checkout
„« Mechanical functional checkout of all rotating equipment
„« VFD programming
„« Tank farm, plant vessels, and piping system water trials
„« Calibration and functionality of all field devices such as transmitters, valve actuators, sensors and switches
„« Plant maintenance personnel training
„« Plant startup and performance run

2004 to 2006
Cal Energy, MidAmerican Energy Company. Calipatria Ca.
I&C/DCS Technician
Instrumentation and DCS support for 13 generating units in 6 geothermal power plants. Designed and installed a fully documenting automatic pressure calibration system using Druck hardware and GE Sensing InteCal software. Configured 3000 plus instrument database and trained I&C technicians on use of system.

Systems supported and other responsibilities:
„« Foxboro I/A DCS running on Sun Unix platforms
„« Emerson Delta V DCS running on Microsoft NT4
„« Woodward Governor, Triconix, and Mitsubishi governor control systems
„« Fuji, Westinghouse, Mitsubishi and GE steam turbines
„« Bently Nevada temperature and vibration monitoring systems
„« RTX and Hathaway plant data logging systems
„« Root Cause analysis of turbine trips and equipment failures
„« PLC and ModBus SCADA systems
„« I&C maintenance, repair and calibration on all field devices including transmitters, Hart and FieldBus devices, valves, hydraulics, etc.

2001 to 2004
Champion Systems, Jamestown N.C.
HVAC Control System Engineer

Activities included:
„« HVAC control system engineering and design
„« Hardware specification and engineering submittals
„« DDC control system software logic design for chillers, boilers, air handlers, cooling towers and pumping systems using Delta Control software
„« Computer HMI screen design using Delta Control Orca View software
„« BacNet configuration and device networking checkout and startup
„« System installation, checkout and commissioning.
„« Customer training, drawings and O&M manuals

1998 to 2001
Systemation, Applied Services Division, Fairport N.Y.
Systems Integrator

Successful systems upgrade at the Rochester NY Van Lear WWTP included three Flottweg centrifuges for sludge dewatering. Binghamton ¡V Johnson City WWTP plant wide upgrade including new odor control building.

Supported systems and activities:
„« Citec software
„« Opto22 I/O
„« Modicon PLC's
„« Provided Foxboro factory trained field services
„« Supported Sales division with field services

1985 to 1998
Total Control System Services, Inc., Varysburg N.Y.
Part Owner

Started and grew business supporting 5 full time employes.

„« General business management
„« Manufacturer's representative for several major lines of instrumentation
„« Repair, calibration, maintenance, installation and start up of instrumentation and control systems
„« Provided technicians for plant shutdowns and outages

The Foxboro Co., Foxboro, MA.
Systems Analyst

Commissioning of upgraded (pneumatic to electronic) reactor vessel cooling system, Yankee Atomic Electric, Rowe Ma. Checkout and startup of Niagara Mohawk Unit 7 Oswego NY Steam Plant.

Activities:
„« Provided field services for entire Foxboro product line
„« Specialized in power system and boiler control system start up and commissioning for utility and industrial fossil fuel applications.

Education
A.A.S. Electrical Technology, Erie Community College, Williamsville, N.Y.
Additional course work
Invensys Triconix System Maintenance for turbine controls
Foxboro I/A System Maintenance 2005
CiTec software configuration
Delta Controls OrcaView software configuration
BacNET configuration
BJ Systems Software (QNX) for process control
Foxboro/Eckhardt control valve sizing and specifying school
Foxboro Service Representative Power Systems Course for boiler and combustion control and commissioning
Foxboro Users course on power systems and boiler control
Foxboro Service Representative Training School
Foxboro Spec200, VideoSpec/MicroSpec, VideoSpec4, Spectrum DCS, Fox3/Fox300 and Foxboro scaling course for process control.

Licenses
F.C.C. General Radio Operator license (Old FCC First Class Commercial)
F.C.C. Amateur Radio License Advanced

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 1598)

Go to Search Parameters...

Brief Description

To work in the technical aspect of a company, which would allow me to apply my educational knowledge in a real working environment and gain valuable hands-on work experience.

•Proficient at Chemical Instrumentation and Environmental Analysis •Familiar with Environmental Sampling techniques •Excellent communication, interpersonal and time management skills. •Self study on unfamiliar subjects

To pursue a career that is challenging, motivating & innovative and has a lot of scope for Development, Learning and Opportunities for giving some distinctive and significant contribution which is in line with today’s technology and help in the personal growth as well.

Around 9 Years of experience in the Operations & Maintenance area at different levels as Supervisor, Maintenance Engineer and Asst Manager.

I am a qualified analytical chemist, possessing extensive experience in international aspects of operations (U.S. EPA regulations, ISO 9001/14001/17025 standards, Project Safety Management PSM/OHSAS) with a wide range of technical proficiency in Health Safety Environment, waste management and docume

Analytical Chemist seeking work in assurance and quality control of products. Wants to be in a lab that will provide knowledge and challenging experiences. Interested in analytical characterization, wet chemistry, and ensuring the quality and assurance of processed products and raw materials.

I&C Technician with geothermal experience

M.Sc. Biotechnology from India with technical skills in Molecular biology, Clinical technology, plant tissue culture etc.

An ambitious and highly skilled Quality engineer with extensive experience in quality engineering, ISO certification, production, management, product development and launch, and customer support.

Power Transmission Line & Lighting of Highways (design overhead lines, instillation, maintenance, modeling, coupling, pipeline, cable size, poles, illumination (lux) & cd/m2 calculation)Low Frequency Electromagnetic Field (Transmission Line) Environmental Radiation Effects on Human Health/ Mitigatio

A challenging and creative technical position in a growth-oriented company in the United States.

I've been working as HSES Advisor more than 7 years in different oil& gas projects such as LNG OP-s,Offshore and Onshore Pipe laying operations,platform constructions, Flotel, diving operations etc.

An experienced and enthusiastic Packaging Development Engineer, with expertise in planning, managing and implementation of New Product Development projects within large multinational companies. Proven ability to work effectively within a multifunctional team and possesses wide knowledge of materials

Versatile, knowledgeable, exploration geologist

Field Engineer / Estimator / Senior Piping Designer / Squad Lead-Checker

Provide technical consultation relative to physical and mechanical means of protecting potable water systems against contamination due to backflow of non-potable substances, including recycled-reclaimed water.

I am environmental engineer. I am searching for a good job related to environmental engineering.

Geological engineering

Well-rounded professional office/field experience in project controls, process engineering, environmental engineering, construction, management, sales, and business consulting. Industries: oil and gas, federal government contracting, residential construction.

A result orientated & decisive environmental management systems specialist, with a diverse mix of experience in both the public & private sectors. Looking for an environmental position, requiring expertise in planning, organising and directing management systems & programs

Mining, Geotechnical and Environment professional

Highly qualified Project Management Professional offering more than 20 years of project and construction management experience in managing and administering complex engineering and construction projects. Results focused and effectual leader with proven ability to set up project management systems

Experienced mechanical engineer with 5+ years of practice in designing and improving mechanical systems, obtaining product certifications and troubleshooting assembly line and field issues

Electrical Foreman / Service Technician

A+, Computer Engineer

12 year U.S.Air Froce NDT TECH

To obtain a challenging job where I can utilize my experience and skills to add value to the company. •Electrical engineer with over 18 years of hands-on experience.

Comprehensive international leadership in Environmental, Health, Safety and Sustainability. Extensive experience in Asia with top multinational firms. Excellent cross-cultural skills in Indonesia, Singapore, Malaysia, Thailand, Philippines and China. Speaks Bahasa Indonesia conversationally.

Bachelor's in electronics and communication and I am a naturalist

Experience in erection and commissioning of water treatment plants of auto and semi auto type. Specially USP 27 grade water.

Over 12 years of Mineral exploration geology: Soil geochemistry,Base metals, Diamonds and Precious Group Minerals in different geological settings. Many years of Project management in remote areas supervising diverse exploration teams. Skilled in Geosoft, Oasis Montaj, ArcGIS and MapInfo softwares.

OIL AND GAS (BOTH UPSTREAM & DOWNSTREAM), PETROCHEMICALS, POWER (NUCLEAR & CCGT) Pharmaceutical, STP

5 years experience in alumina industry as safety, environmental and also process senior engineer

i was in dubai for past 25 years and i moved to australia with my family on peramanent resident visa last year july.

1 yr exp in production of tannic acid, there i used hplc, spray dryer, boiler, extracter, condenser

I am a Mechanical design engineer. I am efficient in Proe, AutoCAD

Environmental Consultant, 2 years experience in site investigations soil and water sampling. Development of site specific risk assessments. Site supervisor on numerous remediation projects.

Graduated in May 2004 with a Bachelor of Science in Electrical Engineering Technology. Objective is to obtain an entry-level engineering position.

Five years of work experience in complementing functional areas such as Design, Manufacturing, Customer Engineering and R&D at large and mid-size corporations in USA and in India providing unique flexibility and cross functional skills

I currently hold over 18 years of government contracting experience including purchasing commodities, service contracts, repair, maintenance agreements and construction contracts via oral solicitation, request for bid (overseas), sealed bidding, and negotiated agreements.

Well-traveled, young and professionally experienced field geologist. Experience working closely with environmental geologist consultants during pre-feasibility exploration project. International experience with fluency in spanish. Willing to put in long days and learn new and challenging duties.

Master (Mechanical Engineering), Employer, Bechtel Corporation & Exxon Mobil. Experience in I & C Engineer and Mechanical Engineer

More than 15 years of environmental / safety experience in mining industry; 1.5 years of experience in exploration by drilling as geologist; 2.5 years of experience in exploration by drilling as environmental / safety specialist

Free! Telecom and electronic engineer, specializing in RF, with over twenty years worldwide experience.

Auto Cad

HVAC MAINTENANCE & PROJECTS MANAGER

25 years supervisory experience in the environmental resources field, including regulatory compliance, drainage and erosion control, waste disposal, air and water quality, habitat protection, reclamation and post-mining land use, and the general mitigation of impacts from industrial operations.

Journeyman Electrician looking to advance

Environmental Manager/Top Wastewater Licenses

PhD environmental engineering/bioremediation, MSc environmental diagnostics, BSc (Hons) Biology

1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out