Resume - Good time management, ability to work with or without supervision and a working ...

Misco Jobs

Resume #84335

CONTACT INFORMATION:
View contact information...

Nationality: Ghanaian
Sex:Male
Marital status: Single.

OBJECTIVE:
Motivated, believe in a learning environment which is the way to achieve the full potential of each individual and performance excellence that will drive the desired result needed.

EDUCATION:
Bachelor of Science Chemistry, Kwame Nkrumah University of Science and Technology, Kumasi (2004-2008).
Mfantsipim School, General Science, (2000-2002), SSSCE, Cape Coast.

TRAINING:
4 – Week training in "Analysis of petroleum products at Tema Oil Refinery (TOR). Organised by Safety Manager (TOR), June 22 – July 17 2009.
4-Week training in "Operations and Process Control at the Movement of Product (MOP) / Waste Water Treatment (WWT) Departments." Organised by Safety Manager (TOR) at TOR, May 11 2009 – June 11 2009.
4-Week training in "Operations at the Utility Department". April 6 2009 – May 6 2009.
8-Week training on "The Processing and Process Control in the Residue Fluid Catalytic Cracking Unit". Organized by Safety Manager (TOR), February 2 2009 – March 31 2009.
8- Week training for National Service Personnel assigned to Safety Department on "Overview of Process Operations at Crude Distillation Unit". Organised by Safety Manager (TOR) at TOR, December 3 2008 - January 31 2009.

WORK EXPERIENCE:
National Service Personnel, Safety Department, Tema Oil Refinery (TOR), Tema (November 2008 – August 2009). Acquired knowledge on hazard identification and risk assessment, general occupational health and safety of workers, equipment and the entire refinery. Gained knowledge in the operations and process control at the various production units (Quality Control department, Crude Distillation Unit, Residue Fluid Catalytic Cracking Unit, Utility unit and Movement of Products / Waste Water Treatment departments).

Industrial Internship Trainee, UEE Explosives GH Ltd, Tarkwa (June 2005 – August 2005).
Learnt sieve analysis, preparation and quality control analysis of ammonium nitrate solution. Gained understanding on the fabrication, quality assurance and shelf life monitoring of emulsion matrix.

SKILLS:
- Proficient in Computing: Microsoft Word, Excel, Power Point and Internet - Ability to work with or without supervision
- A team player with good interpersonala skills
- Effective communication skills

LANGUAGES:
Fluent in English

HOBBIES:
Reading books and magazines
Playing chess
Surfing the internet
Playing soccer

REFERENCES:
Will be provided

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1401 to 1450 of 1622)

Go to Search Parameters...

Brief Description

To be part of a strong team of intellectuals saddled with challenging tasks, targets and responsibilities requiring a high degree of dedication in a conducive and friendly environment that upholds the tenet of customer satisfaction without jeopardizing profit and standards.

Engineer (Design & Vendor Development), (CAD/CAM) Engineer, 1)Planning and maintaining Our Section and the Customer regarding the Development 2) Visit Companies for our tools Development & make Reports on Current Status3)Responsible for the job planning and implementing with the schedules

Senior project planner schedule with 12 years heavy industry and construction projects experience ,professional in using MS Project,Primavera P3&P5,MS office,CMMS systema like SAP R/3 , Maximo. Strong technical background , project management and cost control, contract and claim adminstration

INSTRUMENTATION ENGINEER

Planning, Scheduling, Primavera, Risk management, Pertmaster

I am an M.Tech in Energy Technology and M.Sc in Chemistry. Have Experience Non Conventional Energy Field. Well aware of Electrochemical Power Sources like Fuel Cell, Battery etc. Basic computer skills including language C, C++, Matlab etc.

Mechanical Engineer with wide experience in Manufacturing, Maintenance, Sales and Service, Application Engineering, Project Engineering and Administration. Total experience of 30 years. Can work in any field like Construction, Hospitality Industry and Process Industry.

Ms-word,Ms-Excel,Proficient in management,General HSE certification, HSE Competency Development Course Level 3

If you need a dedicated expert heavy equipment/drill rigs/are welder/fab/design, hydraulics, air compressors, all around field/shop management, i can design/build & repair anything with or without a big budget, will work on contract are as needed!!

Cummins Sales & Service Pakistan (Power Generation)(Nov2007 – to date)Mining Experience(2004-2007):

Project Manager, Plant Technical Manager, Interface Engineering Coordinator, Pre-commissioning Engineer, Commissioning Engineer, Start-up Engineer, Process Engineer, Chemical Engineer

Repairs, servicing, maintenance of electronic systems

iosh managing safely and osha in construction safety and health qalified hse officer with 9 yrs experience in safety. other trainings attended: basic rescue, work safely at heights, scaffolding, first aid, fire fighting etc. work experience in india and middle east in construction projects.

Geology degree and Geology Honours degree. Two years exploration geology experience. Currently busy with Masters degree in Hydrogeology on part time basis. Working as geologists at Hydrogeology company.

Detail oriented Instrument and Controls technician seeking international opportunities

20 years experience in Industrial Electronics, Electrical,Mechanical, Pneumatics, Hydraulics

Involved in all construction activities including fabrication , installation and control off all structural items.Steel structural estimates include, pipe-racks, elevated pipe supports, pump shelters, access platforms, handrails, et

2 years experience in an Open pit coal mine. I have done long term planning for pit and dump, various professional reports, tailings dam design and monitoring, and yearly budget planning. Therefore, I have experience in both mining and geotechnical engineering.

Good time management, ability to work with or without supervision and a working experince in a oil and gas industry

Mechanical Engineer, 12 Years Gulf Experience In Maintenance Department

Dynamic Health & Safety Coordinator Looking For Work In Mining, Heavy Construction Or Oil Industry

im interested in doin marine and i spoke wel in english and i know hindi also and my specification is doin work in any circumstances

Occupational Health Safety & Environmental Practitioner, Post Gruate Cert. in OHS&E Management

Workplace Safety Health Environment Coordinator - Moreton Island Oil Spill Clean Up Project

12 years experience in instrumentation mining processing plant.holder of a craft certifitecate in process control instrumentation.

Chemical/Natural Gas Engineer

Education: M. Sc., Chemistry, Specialisation: Heterogeneous Catalysis; Work experience (current occupation), Researcher, Subject: Preparation supported metal catalysts, Goal: Development self-invented technique; International experience: Manager & windsurf instructor, Aruba, Dutch Antilles

Commissioning, servicing, maintenance, diesel gensets, engine-alternator alignments, overhauling diesel engines.

HSE ENGINEER AND SUPERVISOR

Graduated 09/2004 in Master of Science (Mechanical Engineering) from The University at Buffalo, The State University of New York. Emphasis: Design Optimization. 8 years experience in facilities management (water, fire protection). Extensive experience in South and South East Asia.

Twenty-two years in leadership and management with ten years experience in the Petrochem/Paper Mill industry. Ten years in health and safety in the fields of general construction, maintenance, Turn Around/Shutdown. Able to identify at risk behaviors, trends, and policy infractions through observati

BE in Mechanical Engineering.

Maintenance Technician

Experienced CAD-GIS Professional/Consultant with years of experience in Autodesk design softwares such as AutoCAD, Civil 3D, Map 3D, MapGuide Enterprise and Raster Design.

Marine Geologist with experience in Bathymetric, Oceanographic, Geophysical and Geotechnical Data Processing and QA/QC. Proficient in MicroStation, uSMART and InRoads mapping softwares.

To obtain a challenging, high demand QA/QC, Power Generation Tech, Electrical or Mechanical position utilizing my skills and experience in all fields.

Catia V5, Unigraphics, Pro-Engineer, Solid Edge

Working as a Piping Supervisor in the field of Oil/Petro-Chemical industries Maintenance & Project Work.

I have the qualifications and experience you are seeking. I am certified as a Journeyman Refrigeration Mechanic, Journeyman Electrician, and Controls Technician. My experience includes over 17 years in construction and service of mechanical systems.

Seven years of hands on mining experience in surface and underground mining of rock salt, silica sand, high alumina clay (fire clay), and limestone

Supply Chain and Procurement Professional with international oil and gas project experience!

Comupter And Office applications, Microsoft word proficiency,Good analytical skills

I have done B.Sc Chemistry with First class & also i have prior experience in Bhart Petroleum Co. Ltd as a Process Trainee.

Rangeland Ecology and Management Degree

CSWIP 3.1 Welding Inspector, MIGAS Welding Inspector, Familiar with Software (Auto Cad, PDMS, Pro-Eng), Familiar with Microsoft Office (Word, Excel, Power Point, Visio)

Diploma in computer engineering from state board of punjab

Security, life support, camp management, logistics

Bilinguel (CSST) Construction Site Safety Technicion

I am an enthusiastic highly motivated Quantity Surveyor / Cost Engineer, with an excellent working knowledge of pre & post contract quantity surveying and also pro-active team member with experience of major construction projects. I have gained deep awareness of contract administration and advanced

Technical Writer / Editor and Proposal Writer

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [ 29 ] 30 31 32 33

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Environmental;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out